| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <Y4RVzSM4FQ/tYQAV@dev-arch.thelio-3990X>
Date: Sun, 27 Nov 2022 23:31:41 -0700
From: Nathan Chancellor <nathan@...nel.org>
To: Paul Kocialkowski <paul.kocialkowski@...tlin.com>
Cc: linux-media@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-sunxi@...ts.linux.dev,
linux-kernel@...r.kernel.org, linux-staging@...ts.linux.dev,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Chen-Yu Tsai <wens@...e.org>,
Jernej Skrabec <jernej.skrabec@...il.com>,
Samuel Holland <samuel@...lland.org>,
Sakari Ailus <sakari.ailus@...ux.intel.com>,
Hans Verkuil <hans.verkuil@...co.com>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Maxime Ripard <mripard@...nel.org>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
llvm@...ts.linux.dev
Subject: Re: [PATCH v8 3/6] staging: media: Add support for the Allwinner A31
ISP
Hi Paul,
On Thu, Nov 03, 2022 at 05:37:14PM +0100, Paul Kocialkowski wrote:
> Some Allwinner platforms come with an Image Signal Processor, which
> supports various features in order to enhance and transform data
> received by image sensors into good-looking pictures. In most cases,
> the data is raw bayer, which gets internally converted to RGB and
> finally YUV, which is what the hardware produces.
>
> This driver supports ISPs that are similar to the A31 ISP, which was
> the first standalone ISP found in Allwinner platforms. Simpler ISP
> blocks were found in the A10 and A20, where they are tied to a CSI
> controller. Newer generations of Allwinner SoCs (starting with the
> H6, H616, etc) come with a new camera subsystem and revised ISP.
> Even though these previous and next-generation ISPs are somewhat
> similar to the A31 ISP, they have enough significant differences to
> be out of the scope of this driver.
>
> While the ISP supports many features, including 3A and many
> enhancement blocks, this implementation is limited to the following:
> - V3s (V3/S3) platform support;
> - Bayer media bus formats as input;
> - Semi-planar YUV (NV12/NV21) as output;
> - Debayering with per-component gain and offset configuration;
> - 2D noise filtering with configurable coefficients.
>
> Since many features are missing from the associated uAPI, the driver
> is aimed to integrate staging until all features are properly
> described.
>
> On the technical side, it uses the v4l2 and media controller APIs,
> with a video node for capture, a processor subdev and a video node
> for parameters submission. A specific uAPI structure and associated
> v4l2 meta format are used to configure parameters of the supported
> modules.
>
> One particular thing about the hardware is that configuration for
> module registers needs to be stored in a DMA buffer and gets copied
> to actual registers by the hardware at the next vsync, when instructed
> by a flag. This is handled by the "state" mechanism in the driver.
>
> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@...tlin.com>
This patch is now in -next as commit e3185e1d7c14 ("media: staging:
media: Add support for the Allwinner A31 ISP"), where it causes the
following clang warnings:
> +void sun6i_isp_capture_configure(struct sun6i_isp_device *isp_dev)
> +{
> + unsigned int width, height;
> + unsigned int stride_luma, stride_chroma = 0;
> + unsigned int stride_luma_div4, stride_chroma_div4;
> + const struct sun6i_isp_capture_format *format;
> + const struct v4l2_format_info *info;
> + u32 pixelformat;
> +
> + sun6i_isp_capture_dimensions(isp_dev, &width, &height);
> + sun6i_isp_capture_format(isp_dev, &pixelformat);
> +
> + format = sun6i_isp_capture_format_find(pixelformat);
> + if (WARN_ON(!format))
> + return;
> +
> + sun6i_isp_load_write(isp_dev, SUN6I_ISP_MCH_SIZE_CFG_REG,
> + SUN6I_ISP_MCH_SIZE_CFG_WIDTH(width) |
> + SUN6I_ISP_MCH_SIZE_CFG_HEIGHT(height));
> +
> + info = v4l2_format_info(pixelformat);
> + if (WARN_ON(!info))
> + return;
> +
> + stride_luma = width * info->bpp[0];
> + stride_luma_div4 = DIV_ROUND_UP(stride_luma, 4);
> +
> + if (info->comp_planes > 1) {
> + stride_chroma = width * info->bpp[1] / info->hdiv;
> + stride_chroma_div4 = DIV_ROUND_UP(stride_chroma, 4);
> + }
> +
> + sun6i_isp_load_write(isp_dev, SUN6I_ISP_MCH_CFG_REG,
> + SUN6I_ISP_MCH_CFG_EN |
> + SUN6I_ISP_MCH_CFG_OUTPUT_FMT(format->output_format) |
> + SUN6I_ISP_MCH_CFG_STRIDE_Y_DIV4(stride_luma_div4) |
> + SUN6I_ISP_MCH_CFG_STRIDE_UV_DIV4(stride_chroma_div4));
> +}
drivers/staging/media/sunxi/sun6i-isp/sun6i_isp_capture.c:135:6: error: variable 'stride_chroma_div4' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
if (info->comp_planes > 1) {
^~~~~~~~~~~~~~~~~~~~~
drivers/staging/media/sunxi/sun6i-isp/sun6i_isp_capture.c:144:42: note: uninitialized use occurs here
SUN6I_ISP_MCH_CFG_STRIDE_UV_DIV4(stride_chroma_div4));
^~~~~~~~~~~~~~~~~~
drivers/staging/media/sunxi/sun6i-isp/sun6i_isp_reg.h:249:48: note: expanded from macro 'SUN6I_ISP_MCH_CFG_STRIDE_UV_DIV4'
#define SUN6I_ISP_MCH_CFG_STRIDE_UV_DIV4(v) (((v) << 20) & GENMASK(30, 20))
^
drivers/staging/media/sunxi/sun6i-isp/sun6i_isp_capture.c:135:2: note: remove the 'if' if its condition is always true
if (info->comp_planes > 1) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/staging/media/sunxi/sun6i-isp/sun6i_isp_capture.c:112:51: note: initialize the variable 'stride_chroma_div4' to silence this warning
unsigned int stride_luma_div4, stride_chroma_div4;
^
= 0
Does stride_chroma_div4 want to just be initialized to zero?
> +static int sun6i_isp_proc_notifier_bound(struct v4l2_async_notifier *notifier,
> + struct v4l2_subdev *remote_subdev,
> + struct v4l2_async_subdev *async_subdev)
> +{
> + struct sun6i_isp_device *isp_dev =
> + container_of(notifier, struct sun6i_isp_device, proc.notifier);
> + struct sun6i_isp_proc_async_subdev *proc_async_subdev =
> + container_of(async_subdev, struct sun6i_isp_proc_async_subdev,
> + async_subdev);
> + struct sun6i_isp_proc *proc = &isp_dev->proc;
> + struct sun6i_isp_proc_source *source = proc_async_subdev->source;
> + bool enabled;
> +
> + switch (source->endpoint.base.port) {
> + case SUN6I_ISP_PORT_CSI0:
> + source = &proc->source_csi0;
> + enabled = true;
> + break;
> + case SUN6I_ISP_PORT_CSI1:
> + source = &proc->source_csi1;
> + enabled = !proc->source_csi0.expected;
> + break;
> + default:
> + break;
> + }
> +
> + source->subdev = remote_subdev;
> +
> + return sun6i_isp_proc_link(isp_dev, SUN6I_ISP_PROC_PAD_SINK_CSI,
> + remote_subdev, enabled);
> +}
drivers/staging/media/sunxi/sun6i-isp/sun6i_isp_proc.c:418:2: error: variable 'enabled' is used uninitialized whenever switch default is taken [-Werror,-Wsometimes-uninitialized]
default:
^~~~~~~
drivers/staging/media/sunxi/sun6i-isp/sun6i_isp_proc.c:425:23: note: uninitialized use occurs here
remote_subdev, enabled);
^~~~~~~
drivers/staging/media/sunxi/sun6i-isp/sun6i_isp_proc.c:407:14: note: initialize the variable 'enabled' to silence this warning
bool enabled;
^
= 0
Should there be an early return in the default case?
I do not mind sending patches if you are unable to, assuming I have the
right fixes.
Cheers,
Nathan
Powered by blists - more mailing lists