Message-Id: <8a9aefceebe42d36164f3516c173f18189f0d7e7.1669631086.git.alexl@redhat.com>
Date:   Mon, 28 Nov 2022 12:17:26 +0100
From:   Alexander Larsson <alexl@...hat.com>
To:     linux-fsdevel@...r.kernel.org
Cc:     linux-kernel@...r.kernel.org, gscrivan@...hat.com, alexl@...hat.com
Subject: [PATCH 5/6] composefs: Add documentation

This adds documentation about the composefs filesystem and
how to use it.

Signed-off-by: Alexander Larsson <alexl@...hat.com>
---
 Documentation/filesystems/composefs.rst | 162 ++++++++++++++++++++++++
 1 file changed, 162 insertions(+)
 create mode 100644 Documentation/filesystems/composefs.rst

diff --git a/Documentation/filesystems/composefs.rst b/Documentation/filesystems/composefs.rst
new file mode 100644
index 000000000000..75fbf14aeb33
--- /dev/null
+++ b/Documentation/filesystems/composefs.rst
@@ -0,0 +1,162 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+====================
+Composefs Filesystem
+====================
+
+Introduction
+============
+
+Composefs is a read-only file system that is backed by regular files
+(rather than a block device). It is designed to help easily share
+content between different directory trees, such as container images in
+a local store or ostree checkouts. In addition it also has support for
+integrity validation of file content and directory metadata, in an
+efficient way (using fs-verity).
+
+The filesystem mount source is a binary blob called the descriptor. It
+contains all the inode and directory entry data for the entire
+filesystem. However, instead of storing the file content each regular
+file inode stores a relative path name, and the filesystem gets the
+file content from the filesystem by looking up that filename in a set
+of base directories.
+
+Given such a descriptor called "image.cfs" and a directory with files
+called "/dir" you can mount it like:
+
+  mount -t composefs image.cfs -o basedir=/dir /mnt
+
+Content sharing
+===============
+
+Suppose you have a single basedir where the files are content
+addressed (i.e. named by content digest), and a set of composefs
+descriptors using this basedir. Any file that happen to be shared
+between two images (same content, so same digest) will now only be
+stored once on the disk.
+
+Such sharing is possible even if the metadata for the file in the
+image differs (common reasons for metadata difference are mtime,
+permissions, xattrs, etc). The sharing is also anonymous in the sense
+that you can't tell the difference on the mounted files from a
+non-shared file (for example by looking at the link count for a
+hardlinked file).
+
+In addition, any shared files that are actively in use will share
+page-cache, because the page cache for the file contents will be
+addressed by the backing file in the basedir, This means (for example)
+that shared libraries between images will only be mmap:ed once across
+all mounts.
+
+Integrity validation
+====================
+
+Composefs uses `fs-verity
+<https://www.kernel.org/doc/Documentation/filesystems/fsverity.rst>`
+for integrity validation, and extends it by making the validation also
+apply to the directory metadata.  This happens on two levels,
+validation of the descriptor and validation of the backing files.
+
+For descriptor validation, the idea is that you enable fs-verity on
+the descriptor file which seals it from changes that would affect the
+directory metadata. Additionally you can pass a `digest` mount option,
+which composefs verifies against the descriptor fs-verity
+measure. Such a mount option could be encoded in a trusted source
+(like a signed kernel command line) and be used as a root of trust if
+using composefs for the root filesystem.
+
+For file validation, the descriptor can contain digest for each
+backing file, and you can enable fs-verity on the backing
+files. Composefs will validate the digest before using the backing
+files. This means any (accidental or malicious) modification of the
+basedir will be detected at the time the file is used.
+
+Expected use-cases
+=================
+
+Container Image Storage
+```````````````````````
+
+Typically a container image is stored as a set of "layer"
+directories. merged into one mount by using overlayfs.  The lower
+layers are read-only image content and the upper layer is the
+writable state of a running container. Multiple uses of the same
+layer can be shared this way, but it is hard to share individual
+files between unrelated layers.
+
+Using composefs, we can instead use a shared, content-addressed
+store for all the images in the system, and use a composefs image
+for the read-only image content of each image, pointing into the
+shared store. Then for a running container we use an overlayfs
+with the lower dir being the composefs and the upper dir being
+the writable state.
+
+
+Ostree root filesystem validation
+`````````````````````````````````
+
+Ostree uses a content-addressed on-disk store for file content,
+allowing efficient updates and sharing of content. However to actually
+use these as a root filesystem it needs to create a real
+"chroot-style" directory, containing hard links into the store. The
+store itself is validated when created, but once the hard-link
+directory is created, nothing validates the directory structure of
+that.
+
+Instead of a chroot we can we can use composefs. We create a composefs
+image pointing into the object store, enable fs-verity for everything
+and encode the fs-verity digest of the descriptor in the
+kernel-command line. This will allow booting a trusted system where
+all directory metadata and file content is validated lazily at use.
+
+
+Mount options
+=============
+
+`basedir`: A colon separated list of directories to use as a base when resolving relative content paths.
+`verity_check=[0,1,2]`: When to verify backing file fs-verity: 0 == never, 1 == if specified in image, 2 == always and require it in image.
+`digest`: A fs-verity sha256 digest that the descriptor file must match. If set, `verity_check` defaults to 2.
+
+
+Filesystem format
+=================
+
+The format of the descriptor is contains three sections: header,
+inodes and variable data. All data in the file is stored in
+little-endian form.
+
+The header starts at the beginning of the file and contains version,
+magic value, offsets to the variable data and the root inode nr.
+
+The inode section starts at a fixed location right after the
+header. It is a array of inode data, where for each inode there is
+first a variable length chunk and then a fixed size chunk. An inode nr
+is the offset in the inode data to the start of the fixed chunk.
+
+The fixed inode chunk starts with a flag that tells what parts of the
+inode are stored in the file (meaning it is only the maximal size that
+is fixed). After that the various inode attributes are serialized in
+order, such as mode, ownership, xattrs, and payload length. The
+payload length attribute gives the size of the variable chunk.
+
+The inode variable chunk contains different things depending on the
+file type.  For regular files it is the backing filename. For symlinks
+it is the symlink target. For directories it is a list of references to
+dentries, stored in chunks of maximum 4k. The dentry chunks themselves
+are stored in the variable data section.
+
+The variable data section is stored after the inode section, and you
+can find it from the offset in the header. It contains dentries and
+Xattrs data. The xattrs are referred to by offset and size in the
+xattr attribute in the inode data. Each xattr data can be used by many
+inodes in the filesystem. The variable data chunks are all smaller than
+a page (4K) and are padded to not span pages.
+
+Tools
+=====
+
+Tools for composefs can be found at https://github.com/containers/composefs
+
+There is a mkcomposefs tool which can be used to create images on the
+CLI, and a library that applications can use to create composefs
+images.
-- 
2.38.1

Powered by blists - more mailing lists