[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20221128115958.4049431-3-o.rempel@pengutronix.de>
Date: Mon, 28 Nov 2022 12:59:34 +0100
From: Oleksij Rempel <o.rempel@...gutronix.de>
To: Woojung Huh <woojung.huh@...rochip.com>,
UNGLinuxDriver@...rochip.com, Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>
Cc: Oleksij Rempel <o.rempel@...gutronix.de>, kernel@...gutronix.de,
linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
Arun.Ramadoss@...rochip.com
Subject: [PATCH v1 02/26] net: dsa: microchip: ksz8: ksz8_fdb_dump: fix port validation and VID information
The ksz8_fdb_dump() has multiple issues:
- struct alu_struct was used only to store MAC address.
- port value was misinterpreted as a bit mask
- Filter ID was attempted to use as VID. FID can be used to get VID, but
currently it is not supported.
- by the attempt to use FID, was used not initialized alu.fid...
Before this patch, "bridge fdb" command was providing random results,
which are fixed by this patch:
- random vid information
- assignment to wrong port
Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
---
drivers/net/dsa/microchip/ksz8795.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index 003b0ac2854c..e0530bc3bec0 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -958,15 +958,14 @@ int ksz8_fdb_dump(struct ksz_device *dev, int port,
u16 entries = 0;
u8 timestamp = 0;
u8 fid;
- u8 member;
- struct alu_struct alu;
+ u8 src_port;
+ u8 mac[ETH_ALEN];
do {
- alu.is_static = false;
- ret = ksz8_r_dyn_mac_table(dev, i, alu.mac, &fid, &member,
+ ret = ksz8_r_dyn_mac_table(dev, i, mac, &fid, &src_port,
×tamp, &entries);
- if (!ret && (member & BIT(port))) {
- ret = cb(alu.mac, alu.fid, alu.is_static, data);
+ if (!ret && port == src_port) {
+ ret = cb(mac, 0, false, data);
if (ret)
break;
}
--
2.30.2
Powered by blists - more mailing lists