[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20221128120034.4075562-18-o.rempel@pengutronix.de>
Date: Mon, 28 Nov 2022 13:00:25 +0100
From: Oleksij Rempel <o.rempel@...gutronix.de>
To: Woojung Huh <woojung.huh@...rochip.com>,
UNGLinuxDriver@...rochip.com, Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>
Cc: Oleksij Rempel <o.rempel@...gutronix.de>, kernel@...gutronix.de,
linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
Arun.Ramadoss@...rochip.com
Subject: [PATCH v1 17/26] net: dsa: microchip: ksz8_r_dyn_mac_table(): ksz: do not return EAGAIN on timeout
EAGAIN was not used by previous code and not used by current code. So,
remove it and use proper error value.
Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
---
drivers/net/dsa/microchip/ksz8795.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index 1677f61b138a..1b067e0cacd5 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -382,7 +382,7 @@ static int ksz8_valid_dyn_entry(struct ksz_device *dev, u8 *data)
/* Entry is not ready for accessing. */
if (*data & masks[DYNAMIC_MAC_TABLE_NOT_READY]) {
- return -EAGAIN;
+ return -ETIMEDOUT;
/* Entry is ready for accessing. */
} else {
ksz_read8(dev, regs[REG_IND_DATA_8], data);
@@ -417,15 +417,14 @@ static int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr,
ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr);
ret = ksz8_valid_dyn_entry(dev, &data);
- if (ret == -EAGAIN) {
- if (addr == 0)
- *entries = 0;
- goto unlock_alu;
- } else if (ret == -ENXIO) {
+ if (ret == -ENXIO) {
*entries = 0;
goto unlock_alu;
}
+ if (ret)
+ goto unlock_alu;
+
ksz_read64(dev, regs[REG_IND_DATA_HI], &buf);
data_hi = (u32)(buf >> 32);
data_lo = (u32)buf;
--
2.30.2
Powered by blists - more mailing lists