[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20221129141221.872653-6-vladimir.oltean@nxp.com>
Date: Tue, 29 Nov 2022 16:12:14 +0200
From: Vladimir Oltean <vladimir.oltean@....com>
To: netdev@...r.kernel.org
Cc: Ioana Ciornei <ioana.ciornei@....com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Russell King <linux@...linux.org.uk>,
linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH net-next 05/12] net: dpaa2-eth: assign priv->mac after dpaa2_mac_connect() call
There are 2 requirements for correct code:
- Any time the driver accesses the priv->mac pointer at runtime, it
either holds NULL to indicate a DPNI-DPNI connection (or unconnected
DPNI), or a struct dpaa2_mac whose phylink instance was fully
initialized (created and connected to the PHY). No changes are made to
priv->mac while it is being used. Currently, rtnl_lock() watches over
the call to dpaa2_eth_connect_mac(), so it serves the purpose of
serializing this with all readers of priv->mac.
- dpaa2_mac_connect() should run unlocked, because inside it are 2
phylink calls with incompatible locking requirements: phylink_create()
requires that the rtnl_mutex isn't held, and phylink_fwnode_phy_connect()
requires that the rtnl_mutex is held. The only way to solve those
contradictory requirements is to let dpaa2_mac_connect() take
rtnl_lock() when it needs to.
To solve both requirements, we need to identify the writer side of the
priv->mac pointer, which can be wrapped in a mutex private to the driver
in a future patch. The dpaa2_mac_connect() cannot be part of the writer
side critical section, because of an AB/BA deadlock with rtnl_lock().
So the strategy needs to be that where we prepare the DPMAC by calling
dpaa2_mac_connect(), and only make priv->mac point to it once it's fully
prepared. This ensures that the writer side critical section has the
absolute minimum surface it can.
The reverse strategy is adopted in the dpaa2_eth_disconnect_mac() code
path. This makes sure that priv->mac is NULL when we start tearing down
the DPMAC that we disconnected from, and concurrent code will simply not
see it.
No locking changes in this patch (concurrent code is still blocked by
the rtnl_mutex).
Signed-off-by: Vladimir Oltean <vladimir.oltean@....com>
---
.../net/ethernet/freescale/dpaa2/dpaa2-eth.c | 21 +++++++++++--------
1 file changed, 12 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
index 8896a3198bd2..4dbf8a1651cd 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
@@ -4624,9 +4624,8 @@ static int dpaa2_eth_connect_mac(struct dpaa2_eth_priv *priv)
err = dpaa2_mac_open(mac);
if (err)
goto err_free_mac;
- priv->mac = mac;
- if (dpaa2_eth_is_type_phy(priv)) {
+ if (dpaa2_mac_is_type_phy(mac)) {
err = dpaa2_mac_connect(mac);
if (err) {
if (err == -EPROBE_DEFER)
@@ -4640,11 +4639,12 @@ static int dpaa2_eth_connect_mac(struct dpaa2_eth_priv *priv)
}
}
+ priv->mac = mac;
+
return 0;
err_close_mac:
dpaa2_mac_close(mac);
- priv->mac = NULL;
err_free_mac:
kfree(mac);
return err;
@@ -4652,15 +4652,18 @@ static int dpaa2_eth_connect_mac(struct dpaa2_eth_priv *priv)
static void dpaa2_eth_disconnect_mac(struct dpaa2_eth_priv *priv)
{
- if (dpaa2_eth_is_type_phy(priv))
- dpaa2_mac_disconnect(priv->mac);
+ struct dpaa2_mac *mac = priv->mac;
- if (!dpaa2_eth_has_mac(priv))
+ priv->mac = NULL;
+
+ if (!mac)
return;
- dpaa2_mac_close(priv->mac);
- kfree(priv->mac);
- priv->mac = NULL;
+ if (dpaa2_mac_is_type_phy(mac))
+ dpaa2_mac_disconnect(mac);
+
+ dpaa2_mac_close(mac);
+ kfree(mac);
}
static irqreturn_t dpni_irq0_handler_thread(int irq_num, void *arg)
--
2.34.1
Powered by blists - more mailing lists