[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20221130200950.144618-5-a39.skl@gmail.com>
Date: Wed, 30 Nov 2022 21:09:42 +0100
From: Adam Skladowski <a39.skl@...il.com>
To: unlisted-recipients:; (no To-header on input)
Cc: phone-devel@...r.kernel.org, ~postmarketos/upstreaming@...ts.sr.ht,
Adam Skladowski <a39.skl@...il.com>,
Rob Clark <robdclark@...il.com>,
Abhinav Kumar <quic_abhinavk@...cinc.com>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
Sean Paul <sean@...rly.run>, David Airlie <airlied@...il.com>,
Daniel Vetter <daniel@...ll.ch>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Amit Kucheria <amitk@...nel.org>,
Thara Gopinath <thara.gopinath@...il.com>,
"Rafael J. Wysocki" <rafael@...nel.org>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Zhang Rui <rui.zhang@...el.com>,
Loic Poulain <loic.poulain@...aro.org>,
linux-arm-msm@...r.kernel.org, dri-devel@...ts.freedesktop.org,
freedreno@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-pm@...r.kernel.org
Subject: [PATCH v2 04/12] arm64: dts: qcom: sm6115: Add TSENS node
Add nodes required for TSENS block using the common qcom,tsens-v2 binding.
Signed-off-by: Adam Skladowski <a39.skl@...il.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>
---
arch/arm64/boot/dts/qcom/sm6115.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 2a55087b103e..a2ac06f4693b 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -523,6 +523,17 @@ spmi_bus: spmi@...0000 {
#interrupt-cells = <4>;
};
+ tsens0: thermal-sensor@...0000 {
+ compatible = "qcom,sm6115-tsens", "qcom,tsens-v2";
+ reg = <0x04411000 0x1ff>, /* TM */
+ <0x04410000 0x8>; /* SROT */
+ #qcom,sensors = <16>;
+ interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
+ #thermal-sensor-cells = <1>;
+ };
+
rpm_msg_ram: sram@...0000 {
compatible = "qcom,rpm-msg-ram";
reg = <0x045f0000 0x7000>;
--
2.25.1
Powered by blists - more mailing lists