linux-kernel - [PATCH v4 05/23] phy: qcom-qmp-ufs: Add support for configuring PHY in HS G4 mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu,  1 Dec 2022 23:13:10 +0530
From:   Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To:     martin.petersen@...cle.com, jejb@...ux.ibm.com,
        andersson@...nel.org, vkoul@...nel.org
Cc:     quic_cang@...cinc.com, quic_asutoshd@...cinc.com,
        linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-phy@...ts.infradead.org, linux-scsi@...r.kernel.org,
        dmitry.baryshkov@...aro.org, ahalaney@...hat.com,
        abel.vesa@...aro.org, alim.akhtar@...sung.com, avri.altman@....com,
        bvanassche@....org,
        Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Subject: [PATCH v4 05/23] phy: qcom-qmp-ufs: Add support for configuring PHY in HS G4 mode

Add separate tables_hs_g4 instance to allow the PHY driver to configure the
PHY in HS G4 mode. The individual SoC configs need to supply the Rx, Tx and
PCS register setting in tables_hs_g4 and the UFS driver can request the
Hs G4 mode by calling phy_set_mode_ext() with submode set to UFS_HS_G4.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index 2d5dd336aeb2..82be9b754e8e 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -20,6 +20,7 @@
 #include <linux/reset.h>
 #include <linux/slab.h>
 
+#include <ufs/unipro.h>
 #include "phy-qcom-qmp.h"
 
 /* QPHY_SW_RESET bit */
@@ -549,6 +550,8 @@ struct qmp_phy_cfg {
 	const struct qmp_phy_cfg_tbls tbls;
 	/* Additional sequence for HS Series B */
 	const struct qmp_phy_cfg_tbls tbls_hs_b;
+	/* Additional sequence for HS G4 */
+	const struct qmp_phy_cfg_tbls tbls_hs_g4;
 
 	/* clock ids to be requested */
 	const char * const *clk_list;
@@ -583,6 +586,7 @@ struct qmp_ufs {
 
 	struct phy *phy;
 	u32 mode;
+	u32 submode;
 };
 
 static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
@@ -847,7 +851,11 @@ static void qmp_ufs_init_registers(struct qmp_ufs *qmp, const struct qmp_phy_cfg
 	if (qmp->mode == PHY_MODE_UFS_HS_B)
 		qmp_ufs_serdes_init(qmp, &cfg->tbls_hs_b);
 	qmp_ufs_lanes_init(qmp, &cfg->tbls);
+	if (qmp->submode == UFS_HS_G4)
+		qmp_ufs_lanes_init(qmp, &cfg->tbls_hs_g4);
 	qmp_ufs_pcs_init(qmp, &cfg->tbls);
+	if (qmp->submode == UFS_HS_G4)
+		qmp_ufs_pcs_init(qmp, &cfg->tbls_hs_g4);
 }
 
 static int qmp_ufs_com_init(struct qmp_ufs *qmp)
@@ -1021,6 +1029,7 @@ static int qmp_ufs_set_mode(struct phy *phy, enum phy_mode mode, int submode)
 	struct qmp_ufs *qmp = phy_get_drvdata(phy);
 
 	qmp->mode = mode;
+	qmp->submode = submode;
 
 	return 0;
 }
-- 
2.25.1