[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20221201090242.2381-8-yanhong.wang@starfivetech.com>
Date: Thu, 1 Dec 2022 17:02:42 +0800
From: Yanhong Wang <yanhong.wang@...rfivetech.com>
To: <linux-riscv@...ts.infradead.org>, <netdev@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
CC: "David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Emil Renner Berthing <kernel@...il.dk>,
Richard Cochran <richardcochran@...il.com>,
Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Peter Geis <pgwipeout@...il.com>,
Yanhong Wang <yanhong.wang@...rfivetech.com>
Subject: [PATCH v1 7/7] riscv: dts: starfive: visionfive-v2: Add phy delay_chain configuration
Add phy delay_chain configuration to support motorcomm phy driver for
StarFive VisionFive 2 board.
Signed-off-by: Yanhong Wang <yanhong.wang@...rfivetech.com>
---
.../jh7110-starfive-visionfive-v2.dts | 46 +++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-v2.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-v2.dts
index c8946cf3a268..2868ef4c74ef 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-v2.dts
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-v2.dts
@@ -15,6 +15,8 @@
aliases {
serial0 = &uart0;
+ ethernet0=&gmac0;
+ ethernet1=&gmac1;
};
chosen {
@@ -114,3 +116,47 @@
pinctrl-0 = <&uart0_pins>;
status = "okay";
};
+
+&gmac0 {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy-handle = <&phy0>;
+ status = "okay";
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ rxc_dly_en = <1>;
+ tx_delay_sel_fe = <5>;
+ tx_delay_sel = <0xa>;
+ tx_inverted_10 = <0x1>;
+ tx_inverted_100 = <0x1>;
+ tx_inverted_1000 = <0x1>;
+ };
+ };
+};
+
+&gmac1 {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy-handle = <&phy1>;
+ status = "okay";
+ mdio1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ tx_delay_sel_fe = <5>;
+ tx_delay_sel = <0>;
+ rxc_dly_en = <0>;
+ tx_inverted_10 = <0x1>;
+ tx_inverted_100 = <0x1>;
+ tx_inverted_1000 = <0x0>;
+ };
+ };
+};
--
2.17.1
Powered by blists - more mailing lists