linux-kernel - [PATCH v2 0/3] leds: add driver for SPI driven WorldSemi WS2812B RGB LEDs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20221202034240.455831-1-gch981213@gmail.com>
Date:   Fri,  2 Dec 2022 11:42:37 +0800
From:   Chuanhong Guo <gch981213@...il.com>
To:     linux-leds@...r.kernel.org
Cc:     Chuanhong Guo <gch981213@...il.com>, Pavel Machek <pavel@....cz>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Stanislav Jakubek <stano.jakubek@...il.com>,
        Linus Walleij <linus.walleij@...aro.org>,
        Shawn Guo <shawnguo@...nel.org>,
        Johan Hovold <johan+linaro@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Marijn Suijten <marijn.suijten@...ainline.org>,
        Sven Schwermer <sven.schwermer@...ruptive-technologies.com>,
        devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
        DEVICE TREE BINDINGS), linux-kernel@...r.kernel.org (open list)
Subject: [PATCH v2 0/3] leds: add driver for SPI driven WorldSemi WS2812B RGB LEDs

This patch adds support for driving a chain of WS2812B LED chips
using SPI bus.

WorldSemi WS2812B is a individually addressable LED chip that
can be chained together and controlled individually using a
single wire. The chip recognize a long pulse as a bit of 1 and
a short pulse as a bit of 0. Host sends a continuous stream
of 24-bits color values, each LED chip takes the first 3 byte
it receives as its color value and passes the leftover bytes to
the next LED on the chain.

This driver simulates this protocol using SPI bus by sending
a long pulse as 3'b110 and a short pulse as 3'b100. The SPI
frequency needs to be 2.105MHz~2.85MHz for the timing to be
correct and the controller needs to transfer all the bytes
continuously.

Changes since v1:
various dt binding fixes
add support for default-brightness

Chuanhong Guo (3):
  dt-bindings: vendor-prefixes: add an entry for WorldSemi
  dt-bindings: leds: add dt schema for worldsemi,ws2812b-spi
  leds: add driver for SPI driven WorldSemi WS2812B RGB LEDs

 .../bindings/leds/worldsemi,ws2812b.yaml      | 138 ++++++++++
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 drivers/leds/rgb/Kconfig                      |  11 +
 drivers/leds/rgb/Makefile                     |   1 +
 drivers/leds/rgb/leds-ws2812b.c               | 235 ++++++++++++++++++
 5 files changed, 387 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/worldsemi,ws2812b.yaml
 create mode 100644 drivers/leds/rgb/leds-ws2812b.c

-- 
2.38.1