| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221202100841.4741-8-ilpo.jarvinen@linux.intel.com>
Date: Fri, 2 Dec 2022 12:08:39 +0200
From: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
To: linux-fpga@...r.kernel.org, Xu Yilun <yilun.xu@...el.com>,
Wu Hao <hao.wu@...el.com>, Tom Rix <trix@...hat.com>,
Moritz Fischer <mdf@...nel.org>, Lee Jones <lee@...nel.org>,
Matthew Gerlach <matthew.gerlach@...ux.intel.com>,
Russ Weight <russell.h.weight@...el.com>,
Tianfei zhang <tianfei.zhang@...el.com>,
Mark Brown <broonie@...nel.org>,
Greg KH <gregkh@...uxfoundation.org>,
Marco Pagani <marpagan@...hat.com>,
linux-kernel@...r.kernel.org
Cc: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
Subject: [PATCH v3 7/9] mfd: intel-m10-bmc: Add PMCI driver
Add the mfd driver for the Platform Management Component Interface
(PMCI) based interface of Intel MAX10 BMC controller.
PMCI is a software-visible interface, connected to card BMC which
provided the basic functionality of read/write BMC register. This
driver leverages the regmap APIs to support Intel specific Indirect
Register Interface for register read/write on PMCI.
Previously, intel-m10-bmc provided sysfs under
/sys/bus/spi/devices/... which is generalized in this change because
not all MAX10 BMC appear under SPI anymore.
This patch also adds support for indirect register access via a regmap
interface. The access to the register goes via a hardware
controller/bridge that handles read/write/clear commands and
acknowledgments for the commands. On Intel FPGA IPs with e.g. PMCI or
HSSI, indirect register access is a generic way to access registers.
Co-developed-by: Tianfei zhang <tianfei.zhang@...el.com>
Signed-off-by: Tianfei zhang <tianfei.zhang@...el.com>
Co-developed-by: Russ Weight <russell.h.weight@...el.com>
Signed-off-by: Russ Weight <russell.h.weight@...el.com>
Co-developed-by: Matthew Gerlach <matthew.gerlach@...ux.intel.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@...ux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
---
.../ABI/testing/sysfs-driver-intel-m10-bmc | 8 +-
drivers/mfd/Kconfig | 12 ++
drivers/mfd/Makefile | 2 +
drivers/mfd/intel-m10-bmc-pmci-indirect.c | 133 ++++++++++++++++
drivers/mfd/intel-m10-bmc-pmci-main.c | 147 ++++++++++++++++++
include/linux/mfd/intel-m10-bmc.h | 22 +++
6 files changed, 320 insertions(+), 4 deletions(-)
create mode 100644 drivers/mfd/intel-m10-bmc-pmci-indirect.c
create mode 100644 drivers/mfd/intel-m10-bmc-pmci-main.c
diff --git a/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc b/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc
index 9773925138af..a8ab58035c95 100644
--- a/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc
+++ b/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc
@@ -1,4 +1,4 @@
-What: /sys/bus/spi/devices/.../bmc_version
+What: /sys/bus/.../drivers/intel-m10-bmc/.../bmc_version
Date: June 2020
KernelVersion: 5.10
Contact: Xu Yilun <yilun.xu@...el.com>
@@ -6,7 +6,7 @@ Description: Read only. Returns the hardware build version of Intel
MAX10 BMC chip.
Format: "0x%x".
-What: /sys/bus/spi/devices/.../bmcfw_version
+What: /sys/bus/.../drivers/intel-m10-bmc/.../bmcfw_version
Date: June 2020
KernelVersion: 5.10
Contact: Xu Yilun <yilun.xu@...el.com>
@@ -14,7 +14,7 @@ Description: Read only. Returns the firmware version of Intel MAX10
BMC chip.
Format: "0x%x".
-What: /sys/bus/spi/devices/.../mac_address
+What: /sys/bus/.../drivers/intel-m10-bmc/.../mac_address
Date: January 2021
KernelVersion: 5.12
Contact: Russ Weight <russell.h.weight@...el.com>
@@ -25,7 +25,7 @@ Description: Read only. Returns the first MAC address in a block
space.
Format: "%02x:%02x:%02x:%02x:%02x:%02x".
-What: /sys/bus/spi/devices/.../mac_count
+What: /sys/bus/.../drivers/intel-m10-bmc/.../mac_count
Date: January 2021
KernelVersion: 5.12
Contact: Russ Weight <russell.h.weight@...el.com>
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index a09d4ac60dc7..82f13614d98a 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -2238,6 +2238,18 @@ config MFD_INTEL_M10_BMC_SPI
additional drivers must be enabled in order to use the functionality
of the device.
+config MFD_INTEL_M10_BMC_PMCI
+ tristate "Intel MAX 10 Board Management Controller with PMCI"
+ depends on FPGA_DFL
+ select MFD_INTEL_M10_BMC_CORE
+ select REGMAP
+ help
+ Support for the Intel MAX 10 board management controller via PMCI.
+
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the functionality
+ of the device.
+
config MFD_RSMU_I2C
tristate "Renesas Synchronization Management Unit with I2C"
depends on I2C && OF
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 5d1f308ee2a7..603c0a8f1241 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -274,6 +274,8 @@ obj-$(CONFIG_MFD_SIMPLE_MFD_I2C) += simple-mfd-i2c.o
obj-$(CONFIG_MFD_INTEL_M10_BMC_CORE) += intel-m10-bmc-core.o
obj-$(CONFIG_MFD_INTEL_M10_BMC_SPI) += intel-m10-bmc-spi.o
+intel-m10-bmc-pmci-objs := intel-m10-bmc-pmci-main.o intel-m10-bmc-pmci-indirect.o
+obj-$(CONFIG_MFD_INTEL_M10_BMC_PMCI) += intel-m10-bmc-pmci.o
obj-$(CONFIG_MFD_ATC260X) += atc260x-core.o
obj-$(CONFIG_MFD_ATC260X_I2C) += atc260x-i2c.o
diff --git a/drivers/mfd/intel-m10-bmc-pmci-indirect.c b/drivers/mfd/intel-m10-bmc-pmci-indirect.c
new file mode 100644
index 000000000000..cf347f93c05d
--- /dev/null
+++ b/drivers/mfd/intel-m10-bmc-pmci-indirect.c
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Intel FGPA indirect register access via hardware controller/bridge.
+//
+// Copyright (C) 2020-2022 Intel Corporation.
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include <linux/mfd/intel-m10-bmc.h>
+
+#define INDIRECT_CMD_OFF 0
+#define INDIRECT_CMD_CLR 0
+#define INDIRECT_CMD_RD BIT(0)
+#define INDIRECT_CMD_WR BIT(1)
+#define INDIRECT_CMD_ACK BIT(2)
+
+#define INDIRECT_ADDR_OFF 0x4
+#define INDIRECT_RD_OFF 0x8
+#define INDIRECT_WR_OFF 0xc
+
+#define INDIRECT_INT_US 1
+#define INDIRECT_TIMEOUT_US 10000
+
+struct indirect_ctx {
+ void __iomem *base;
+ struct device *dev;
+};
+
+static int indirect_bus_clear_cmd(struct indirect_ctx *ctx)
+{
+ unsigned int cmd;
+ int ret;
+
+ writel(INDIRECT_CMD_CLR, ctx->base + INDIRECT_CMD_OFF);
+
+ ret = readl_poll_timeout(ctx->base + INDIRECT_CMD_OFF, cmd,
+ cmd == INDIRECT_CMD_CLR,
+ INDIRECT_INT_US, INDIRECT_TIMEOUT_US);
+ if (ret)
+ dev_err(ctx->dev, "timed out waiting clear cmd (residual cmd=0x%x)\n", cmd);
+
+ return ret;
+}
+
+static int indirect_bus_reg_read(void *context, unsigned int reg,
+ unsigned int *val)
+{
+ struct indirect_ctx *ctx = context;
+ unsigned int cmd, ack, tmpval;
+ int ret;
+
+ cmd = readl(ctx->base + INDIRECT_CMD_OFF);
+ if (cmd != INDIRECT_CMD_CLR)
+ dev_warn(ctx->dev, "residual cmd 0x%x on read entry\n", cmd);
+
+ writel(reg, ctx->base + INDIRECT_ADDR_OFF);
+ writel(INDIRECT_CMD_RD, ctx->base + INDIRECT_CMD_OFF);
+
+ ret = readl_poll_timeout(ctx->base + INDIRECT_CMD_OFF, ack,
+ (ack & INDIRECT_CMD_ACK) == INDIRECT_CMD_ACK,
+ INDIRECT_INT_US, INDIRECT_TIMEOUT_US);
+ if (ret)
+ dev_err(ctx->dev, "read timed out on reg 0x%x ack 0x%x\n", reg, ack);
+ else
+ tmpval = readl(ctx->base + INDIRECT_RD_OFF);
+
+ if (indirect_bus_clear_cmd(ctx)) {
+ if (!ret)
+ ret = -ETIMEDOUT;
+ goto out;
+ }
+
+ *val = tmpval;
+out:
+ return ret;
+}
+
+static int indirect_bus_reg_write(void *context, unsigned int reg,
+ unsigned int val)
+{
+ struct indirect_ctx *ctx = context;
+ unsigned int cmd, ack;
+ int ret;
+
+ cmd = readl(ctx->base + INDIRECT_CMD_OFF);
+ if (cmd != INDIRECT_CMD_CLR)
+ dev_warn(ctx->dev, "residual cmd 0x%x on write entry\n", cmd);
+
+ writel(val, ctx->base + INDIRECT_WR_OFF);
+ writel(reg, ctx->base + INDIRECT_ADDR_OFF);
+ writel(INDIRECT_CMD_WR, ctx->base + INDIRECT_CMD_OFF);
+
+ ret = readl_poll_timeout(ctx->base + INDIRECT_CMD_OFF, ack,
+ (ack & INDIRECT_CMD_ACK) == INDIRECT_CMD_ACK,
+ INDIRECT_INT_US, INDIRECT_TIMEOUT_US);
+ if (ret)
+ dev_err(ctx->dev, "write timed out on reg 0x%x ack 0x%x\n", reg, ack);
+
+ if (indirect_bus_clear_cmd(ctx)) {
+ if (!ret)
+ ret = -ETIMEDOUT;
+ }
+
+ return ret;
+}
+
+static const struct regmap_bus indirect_bus = {
+ .reg_write = indirect_bus_reg_write,
+ .reg_read = indirect_bus_reg_read,
+};
+
+struct regmap *__devm_m10_regmap_indirect(struct device *dev,
+ void __iomem *base,
+ struct regmap_config *cfg,
+ struct lock_class_key *lock_key,
+ const char *lock_name)
+{
+ struct indirect_ctx *ctx;
+
+ ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return NULL;
+
+ ctx->base = base;
+ ctx->dev = dev;
+
+ indirect_bus_clear_cmd(ctx);
+
+ return __devm_regmap_init(dev, &indirect_bus, ctx, cfg, lock_key, lock_name);
+}
diff --git a/drivers/mfd/intel-m10-bmc-pmci-main.c b/drivers/mfd/intel-m10-bmc-pmci-main.c
new file mode 100644
index 000000000000..11e528b2f707
--- /dev/null
+++ b/drivers/mfd/intel-m10-bmc-pmci-main.c
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * MFD driver for Platform Management Component Interface (PMCI) based
+ * interface to MAX10 BMC.
+ *
+ * Copyright (C) 2020-2022 Intel Corporation.
+ *
+ */
+
+#include <linux/dfl.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/intel-m10-bmc.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#define M10BMC_PMCI_INDIRECT_BASE 0x400
+
+#define M10BMC_PMCI_SYS_BASE 0x0
+#define M10BMC_PMCI_SYS_END 0xfff
+
+#define M10BMC_PMCI_DOORBELL 0x1c0
+#define M10BMC_PMCI_AUTH_RESULT 0x1c4
+
+/* Telemetry registers */
+#define M10BMC_PMCI_TELEM_START 0x400
+#define M10BMC_PMCI_TELEM_END 0x78c
+
+#define M10BMC_PMCI_BUILD_VER 0x0
+#define NIOS2_PMCI_FW_VERSION 0x4
+#define M10BMC_PMCI_MAC_LOW 0x20
+#define M10BMC_PMCI_MAC_HIGH (M10BMC_PMCI_MAC_LOW + 4)
+
+/* Addresses for security related data in FLASH */
+#define M10BMC_PMCI_BMC_REH_ADDR 0x7ffc004
+#define M10BMC_PMCI_BMC_PROG_ADDR 0x7ffc000
+#define M10BMC_PMCI_BMC_PROG_MAGIC 0x5746
+
+#define M10BMC_PMCI_SR_REH_ADDR 0x7ffd004
+#define M10BMC_PMCI_SR_PROG_ADDR 0x7ffd000
+#define M10BMC_PMCI_SR_PROG_MAGIC 0x5253
+
+#define M10BMC_PMCI_PR_REH_ADDR 0x7ffe004
+#define M10BMC_PMCI_PR_PROG_ADDR 0x7ffe000
+#define M10BMC_PMCI_PR_PROG_MAGIC 0x5250
+
+#define M10BMC_PMCI_STAGING_FLASH_COUNT 0x7ff5000
+
+struct m10bmc_pmci_device {
+ void __iomem *base;
+ struct intel_m10bmc m10bmc;
+};
+
+static const struct regmap_range m10bmc_pmci_regmap_range[] = {
+ regmap_reg_range(M10BMC_PMCI_SYS_BASE, M10BMC_PMCI_SYS_END),
+};
+
+static const struct regmap_access_table m10bmc_pmci_access_table = {
+ .yes_ranges = m10bmc_pmci_regmap_range,
+ .n_yes_ranges = ARRAY_SIZE(m10bmc_pmci_regmap_range),
+};
+
+static struct regmap_config m10bmc_pmci_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .wr_table = &m10bmc_pmci_access_table,
+ .rd_table = &m10bmc_pmci_access_table,
+ .max_register = M10BMC_PMCI_SYS_END,
+};
+
+static struct mfd_cell m10bmc_pmci_n6000_bmc_subdevs[] = {
+ { .name = "n6000bmc-hwmon" },
+};
+
+static const struct m10bmc_csr_map m10bmc_pmci_csr_map = {
+ .base = M10BMC_PMCI_SYS_BASE,
+ .build_version = M10BMC_PMCI_BUILD_VER,
+ .fw_version = NIOS2_PMCI_FW_VERSION,
+ .mac_low = M10BMC_PMCI_MAC_LOW,
+ .mac_high = M10BMC_PMCI_MAC_HIGH,
+ .doorbell = M10BMC_PMCI_DOORBELL,
+ .auth_result = M10BMC_PMCI_AUTH_RESULT,
+ .bmc_prog_addr = M10BMC_PMCI_BMC_PROG_ADDR,
+ .bmc_reh_addr = M10BMC_PMCI_BMC_REH_ADDR,
+ .bmc_magic = M10BMC_PMCI_BMC_PROG_MAGIC,
+ .sr_prog_addr = M10BMC_PMCI_SR_PROG_ADDR,
+ .sr_reh_addr = M10BMC_PMCI_SR_REH_ADDR,
+ .sr_magic = M10BMC_PMCI_SR_PROG_MAGIC,
+ .pr_prog_addr = M10BMC_PMCI_PR_PROG_ADDR,
+ .pr_reh_addr = M10BMC_PMCI_PR_REH_ADDR,
+ .pr_magic = M10BMC_PMCI_PR_PROG_MAGIC,
+ .rsu_update_counter = M10BMC_PMCI_STAGING_FLASH_COUNT,
+};
+
+static const struct intel_m10bmc_platform_info m10bmc_pmci_n6000 = {
+ .cells = m10bmc_pmci_n6000_bmc_subdevs,
+ .n_cells = ARRAY_SIZE(m10bmc_pmci_n6000_bmc_subdevs),
+ .csr_map = &m10bmc_pmci_csr_map,
+};
+
+static int m10bmc_pmci_probe(struct dfl_device *ddev)
+{
+ struct device *dev = &ddev->dev;
+ struct m10bmc_pmci_device *pmci;
+
+ pmci = devm_kzalloc(dev, sizeof(*pmci), GFP_KERNEL);
+ if (!pmci)
+ return -ENOMEM;
+
+ pmci->m10bmc.dev = dev;
+
+ pmci->base = devm_ioremap_resource(dev, &ddev->mmio_res);
+ if (IS_ERR(pmci->base))
+ return PTR_ERR(pmci->base);
+
+ pmci->m10bmc.regmap =
+ devm_m10_regmap_indirect(dev,
+ pmci->base + M10BMC_PMCI_INDIRECT_BASE,
+ &m10bmc_pmci_regmap_config);
+ if (IS_ERR(pmci->m10bmc.regmap))
+ return PTR_ERR(pmci->m10bmc.regmap);
+
+ return m10bmc_dev_init(&pmci->m10bmc, &m10bmc_pmci_n6000);
+}
+
+#define FME_FEATURE_ID_M10BMC_PMCI 0x12
+
+static const struct dfl_device_id m10bmc_pmci_ids[] = {
+ { FME_ID, FME_FEATURE_ID_M10BMC_PMCI },
+ { }
+};
+MODULE_DEVICE_TABLE(dfl, m10bmc_pmci_ids);
+
+static struct dfl_driver m10bmc_pmci_driver = {
+ .drv = {
+ .name = "intel-m10-bmc",
+ .dev_groups = m10bmc_dev_groups,
+ },
+ .id_table = m10bmc_pmci_ids,
+ .probe = m10bmc_pmci_probe,
+};
+
+module_dfl_driver(m10bmc_pmci_driver);
+
+MODULE_DESCRIPTION("MAX10 BMC PMCI-based interface");
+MODULE_AUTHOR("Intel Corporation");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/intel-m10-bmc.h b/include/linux/mfd/intel-m10-bmc.h
index 71ace732bb48..d0497046de5f 100644
--- a/include/linux/mfd/intel-m10-bmc.h
+++ b/include/linux/mfd/intel-m10-bmc.h
@@ -161,4 +161,26 @@ static inline int m10bmc_sys_read(struct intel_m10bmc *m10bmc, unsigned int offs
int m10bmc_dev_init(struct intel_m10bmc *m10bmc, const struct intel_m10bmc_platform_info *info);
extern const struct attribute_group *m10bmc_dev_groups[];
+/*
+ * Intel FPGA indirect register access support
+ */
+struct regmap *__devm_m10_regmap_indirect(struct device *dev,
+ void __iomem *base,
+ struct regmap_config *cfg,
+ struct lock_class_key *lock_key,
+ const char *lock_name);
+
+/**
+ * devm_m10_regmap_indirect - create a regmap for indirect register access
+ * @dev: device creating the regmap
+ * @base: __iomem point to base of memory with mailbox
+ * @cfg: regmap_config describing interface
+ *
+ * Return: 0 on success, negative error code otherwise.
+ */
+#define devm_m10_regmap_indirect(dev, base, config) \
+ __regmap_lockdep_wrapper(__devm_m10_regmap_indirect, #config, \
+ dev, base, config)
+
+
#endif /* __MFD_INTEL_M10_BMC_H */
--
2.30.2
Powered by blists - more mailing lists