[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <0dcd938f410bdbb0a011bec51c4b5b26882ca10a.1669996867.git.william.gray@linaro.org>
Date: Fri, 2 Dec 2022 11:27:08 -0500
From: William Breathitt Gray <william.gray@...aro.org>
To: linus.walleij@...aro.org, brgl@...ev.pl
Cc: andriy.shevchenko@...ux.intel.com, linux-gpio@...r.kernel.org,
linux-kernel@...r.kernel.org, michael@...le.cc, broonie@...nel.org,
William Breathitt Gray <william.gray@...aro.org>
Subject: [PATCH v4 2/9] regmap-irq: Add handle_mask_sync() callback
Provide a public callback handle_mask_sync() that drivers can use when
they have more complex IRQ masking logic. The default implementation is
regmap_irq_handle_mask_sync(), used if the chip doesn't provide its own
callback.
Signed-off-by: William Breathitt Gray <william.gray@...aro.org>
---
drivers/base/regmap/regmap-irq.c | 44 ++++++++++++++++++++++----------
include/linux/regmap.h | 5 ++++
2 files changed, 36 insertions(+), 13 deletions(-)
diff --git a/drivers/base/regmap/regmap-irq.c b/drivers/base/regmap/regmap-irq.c
index 4ef9488d05cd..968681fa8d09 100644
--- a/drivers/base/regmap/regmap-irq.c
+++ b/drivers/base/regmap/regmap-irq.c
@@ -115,12 +115,20 @@ static void regmap_irq_sync_unlock(struct irq_data *data)
*/
for (i = 0; i < d->chip->num_regs; i++) {
if (d->mask_base) {
- reg = d->get_irq_reg(d, d->mask_base, i);
- ret = regmap_update_bits(d->map, reg,
- d->mask_buf_def[i], d->mask_buf[i]);
- if (ret)
- dev_err(d->map->dev, "Failed to sync masks in %x\n",
- reg);
+ if (d->chip->handle_mask_sync)
+ d->chip->handle_mask_sync(d->map, i,
+ d->mask_buf_def[i],
+ d->mask_buf[i],
+ d->chip->irq_drv_data);
+ else {
+ reg = d->get_irq_reg(d, d->mask_base, i);
+ ret = regmap_update_bits(d->map, reg,
+ d->mask_buf_def[i],
+ d->mask_buf[i]);
+ if (ret)
+ dev_err(d->map->dev, "Failed to sync masks in %x\n",
+ reg);
+ }
}
if (d->unmask_base) {
@@ -917,13 +925,23 @@ int regmap_add_irq_chip_fwnode(struct fwnode_handle *fwnode,
d->mask_buf[i] = d->mask_buf_def[i];
if (d->mask_base) {
- reg = d->get_irq_reg(d, d->mask_base, i);
- ret = regmap_update_bits(d->map, reg,
- d->mask_buf_def[i], d->mask_buf[i]);
- if (ret) {
- dev_err(map->dev, "Failed to set masks in 0x%x: %d\n",
- reg, ret);
- goto err_alloc;
+ if (chip->handle_mask_sync) {
+ ret = chip->handle_mask_sync(d->map, i,
+ d->mask_buf_def[i],
+ d->mask_buf[i],
+ chip->irq_drv_data);
+ if (ret)
+ goto err_alloc;
+ } else {
+ reg = d->get_irq_reg(d, d->mask_base, i);
+ ret = regmap_update_bits(d->map, reg,
+ d->mask_buf_def[i],
+ d->mask_buf[i]);
+ if (ret) {
+ dev_err(map->dev, "Failed to set masks in 0x%x: %d\n",
+ reg, ret);
+ goto err_alloc;
+ }
}
}
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index ca3434dca3a0..cc07645501af 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -1542,6 +1542,8 @@ struct regmap_irq_chip_data;
* before regmap_irq_handler process the interrupts.
* @handle_post_irq: Driver specific callback to handle interrupt from device
* after handling the interrupts in regmap_irq_handler().
+ * @handle_mask_sync: Callback used to handle IRQ mask syncs. The index will be
+ * in the range [0, num_regs)
* @set_type_virt: Driver specific callback to extend regmap_irq_set_type()
* and configure virt regs. Deprecated, use @set_type_config
* callback and config registers instead.
@@ -1603,6 +1605,9 @@ struct regmap_irq_chip {
int (*handle_pre_irq)(void *irq_drv_data);
int (*handle_post_irq)(void *irq_drv_data);
+ int (*handle_mask_sync)(struct regmap *map, int index,
+ unsigned int mask_buf_def,
+ unsigned int mask_buf, void *irq_drv_data);
int (*set_type_virt)(unsigned int **buf, unsigned int type,
unsigned long hwirq, int reg);
int (*set_type_config)(unsigned int **buf, unsigned int type,
--
2.38.1
Powered by blists - more mailing lists