linux-kernel - Re: [PATCH v6 3/3] iio: magnetometer: add ti tmag5273 driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20221203172047.2792343e@jic23-huawei>
Date:   Sat, 3 Dec 2022 17:20:47 +0000
From:   Jonathan Cameron <jic23@...nel.org>
To:     Gerald Loacker <gerald.loacker@...fvision.net>
Cc:     linux-iio@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, Lars-Peter Clausen <lars@...afoo.de>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
        Jakob Hauser <jahau@...ketmail.com>,
        Linus Walleij <linus.walleij@...aro.org>,
        Nikita Yushchenko <nikita.yoush@...entembedded.com>,
        Michael Riesch <michael.riesch@...fvision.net>
Subject: Re: [PATCH v6 3/3] iio: magnetometer: add ti tmag5273 driver

On Thu,  1 Dec 2022 08:22:20 +0100
Gerald Loacker <gerald.loacker@...fvision.net> wrote:

> Add support for TI TMAG5273 Low-Power Linear 3D Hall-Effect Sensor.
> Additionally to temperature and magnetic X, Y and Z-axes the angle and
> magnitude are reported.
> The sensor is operating in continuous measurement mode and changes to sleep
> mode if not used for 5 seconds.
> 
> Datasheet: https://www.ti.com/lit/gpn/tmag5273
> Signed-off-by: Gerald Loacker <gerald.loacker@...fvision.net>
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>

> +		case IIO_ANGL:
> +			/*
> +			 * Angle is in degrees and has four fractional bits,
> +			 * therefore use 1/16 * pi/180 to convert to radiants.
typo. radians

I'll fix whilst applying.
> +			 */

> +}