[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20221203004053.1be69003@slackpad.lan>
Date: Sat, 3 Dec 2022 00:40:53 +0000
From: Andre Przywara <andre.przywara@....com>
To: Samuel Holland <samuel@...lland.org>
Cc: Chen-Yu Tsai <wens@...e.org>,
Jernej Skrabec <jernej.skrabec@...il.com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-clk@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-sunxi@...ts.linux.dev,
Fabien Poussin <fabien.poussin@...il.com>
Subject: Re: [PATCH 5/5] clk: sunxi-ng: d1: Add CAN bus gates and resets
On Sat, 26 Nov 2022 13:13:19 -0600
Samuel Holland <samuel@...lland.org> wrote:
Hi,
> From: Fabien Poussin <fabien.poussin@...il.com>
>
> The D1 CCU contains gates and resets for two CAN buses. While the CAN
> bus controllers are only documented for the T113 SoC, the CCU is the
> same across all SoC variants.
So my version of the T113 manual only barely mentions the existence of
CAN controllers, but doesn't list any details, not even a base address
or those clock gates.
However I can confirm that the two lowest bits are implemented in
+0x92c. I also verified that the bits and numbers below match up.
> Signed-off-by: Fabien Poussin <fabien.poussin@...il.com>
> Signed-off-by: Samuel Holland <samuel@...lland.org>
Reviewed-by: Andre Przywara <andre.przywara@....com>
Cheers,
Andre
> ---
>
> drivers/clk/sunxi-ng/ccu-sun20i-d1.c | 11 +++++++++++
> drivers/clk/sunxi-ng/ccu-sun20i-d1.h | 2 +-
> include/dt-bindings/clock/sun20i-d1-ccu.h | 2 ++
> include/dt-bindings/reset/sun20i-d1-ccu.h | 2 ++
> 4 files changed, 16 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/sunxi-ng/ccu-sun20i-d1.c b/drivers/clk/sunxi-ng/ccu-sun20i-d1.c
> index c5a7df93602c..48a8fb2c43b7 100644
> --- a/drivers/clk/sunxi-ng/ccu-sun20i-d1.c
> +++ b/drivers/clk/sunxi-ng/ccu-sun20i-d1.c
> @@ -469,6 +469,11 @@ static SUNXI_CCU_GATE_HWS(bus_i2c2_clk, "bus-i2c2", apb1_hws,
> static SUNXI_CCU_GATE_HWS(bus_i2c3_clk, "bus-i2c3", apb1_hws,
> 0x91c, BIT(3), 0);
>
> +static SUNXI_CCU_GATE_HWS(bus_can0_clk, "bus-can0", apb1_hws,
> + 0x92c, BIT(0), 0);
> +static SUNXI_CCU_GATE_HWS(bus_can1_clk, "bus-can1", apb1_hws,
> + 0x92c, BIT(1), 0);
> +
> static const struct clk_parent_data spi_parents[] = {
> { .fw_name = "hosc" },
> { .hw = &pll_periph0_clk.hw },
> @@ -997,6 +1002,8 @@ static struct ccu_common *sun20i_d1_ccu_clks[] = {
> &bus_i2c1_clk.common,
> &bus_i2c2_clk.common,
> &bus_i2c3_clk.common,
> + &bus_can0_clk.common,
> + &bus_can1_clk.common,
> &spi0_clk.common,
> &spi1_clk.common,
> &bus_spi0_clk.common,
> @@ -1147,6 +1154,8 @@ static struct clk_hw_onecell_data sun20i_d1_hw_clks = {
> [CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw,
> [CLK_BUS_I2C2] = &bus_i2c2_clk.common.hw,
> [CLK_BUS_I2C3] = &bus_i2c3_clk.common.hw,
> + [CLK_BUS_CAN0] = &bus_can0_clk.common.hw,
> + [CLK_BUS_CAN1] = &bus_can1_clk.common.hw,
> [CLK_SPI0] = &spi0_clk.common.hw,
> [CLK_SPI1] = &spi1_clk.common.hw,
> [CLK_BUS_SPI0] = &bus_spi0_clk.common.hw,
> @@ -1252,6 +1261,8 @@ static struct ccu_reset_map sun20i_d1_ccu_resets[] = {
> [RST_BUS_I2C1] = { 0x91c, BIT(17) },
> [RST_BUS_I2C2] = { 0x91c, BIT(18) },
> [RST_BUS_I2C3] = { 0x91c, BIT(19) },
> + [RST_BUS_CAN0] = { 0x92c, BIT(16) },
> + [RST_BUS_CAN1] = { 0x92c, BIT(17) },
> [RST_BUS_SPI0] = { 0x96c, BIT(16) },
> [RST_BUS_SPI1] = { 0x96c, BIT(17) },
> [RST_BUS_EMAC] = { 0x97c, BIT(16) },
> diff --git a/drivers/clk/sunxi-ng/ccu-sun20i-d1.h b/drivers/clk/sunxi-ng/ccu-sun20i-d1.h
> index e303176f0d4e..b14da36e2537 100644
> --- a/drivers/clk/sunxi-ng/ccu-sun20i-d1.h
> +++ b/drivers/clk/sunxi-ng/ccu-sun20i-d1.h
> @@ -10,6 +10,6 @@
> #include <dt-bindings/clock/sun20i-d1-ccu.h>
> #include <dt-bindings/reset/sun20i-d1-ccu.h>
>
> -#define CLK_NUMBER (CLK_FANOUT2 + 1)
> +#define CLK_NUMBER (CLK_BUS_CAN1 + 1)
>
> #endif /* _CCU_SUN20I_D1_H_ */
> diff --git a/include/dt-bindings/clock/sun20i-d1-ccu.h b/include/dt-bindings/clock/sun20i-d1-ccu.h
> index e3ac53315e1a..e143b9929763 100644
> --- a/include/dt-bindings/clock/sun20i-d1-ccu.h
> +++ b/include/dt-bindings/clock/sun20i-d1-ccu.h
> @@ -152,5 +152,7 @@
> #define CLK_FANOUT0 142
> #define CLK_FANOUT1 143
> #define CLK_FANOUT2 144
> +#define CLK_BUS_CAN0 145
> +#define CLK_BUS_CAN1 146
>
> #endif /* _DT_BINDINGS_CLK_SUN20I_D1_CCU_H_ */
> diff --git a/include/dt-bindings/reset/sun20i-d1-ccu.h b/include/dt-bindings/reset/sun20i-d1-ccu.h
> index de9ff5203239..f8001cf50bf1 100644
> --- a/include/dt-bindings/reset/sun20i-d1-ccu.h
> +++ b/include/dt-bindings/reset/sun20i-d1-ccu.h
> @@ -73,5 +73,7 @@
> #define RST_BUS_DSP_CFG 63
> #define RST_BUS_DSP_DBG 64
> #define RST_BUS_RISCV_CFG 65
> +#define RST_BUS_CAN0 66
> +#define RST_BUS_CAN1 67
>
> #endif /* _DT_BINDINGS_RST_SUN20I_D1_CCU_H_ */
Powered by blists - more mailing lists