[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <419ABEAD-3E80-4A6D-AE44-8DF30C4CBA71@linaro.org>
Date: Tue, 06 Dec 2022 00:23:59 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Bjorn Andersson <quic_bjorande@...cinc.com>
CC: Rob Clark <robdclark@...il.com>,
Abhinav Kumar <quic_abhinavk@...cinc.com>,
Sean Paul <sean@...rly.run>, David Airlie <airlied@...il.com>,
Daniel Vetter <daniel@...ll.ch>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Kalyan Thota <quic_kalyant@...cinc.com>,
Jessica Zhang <quic_jesszhan@...cinc.com>,
Kuogee Hsieh <quic_khsieh@...cinc.com>,
Johan Hovold <johan+linaro@...nel.org>,
Sankeerth Billakanti <quic_sbillaka@...cinc.com>,
linux-arm-msm@...r.kernel.org, dri-devel@...ts.freedesktop.org,
freedreno@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v4 12/13] arm64: dts: qcom: sc8280xp-crd: Enable EDP
On 5 December 2022 20:44:32 GMT+03:00, Bjorn Andersson <quic_bjorande@...cinc.com> wrote:
>From: Bjorn Andersson <bjorn.andersson@...aro.org>
>
>The SC8280XP CRD has a EDP display on MDSS0 DP3, enable relevant nodes
>and link it together with the backlight control.
>
>Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
>Signed-off-by: Bjorn Andersson <quic_bjorande@...cinc.com>
>---
>
>Changes since v3:
>- Added description of the regulator that powers the panel.
>
> arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 72 ++++++++++++++++++++++-
> 1 file changed, 71 insertions(+), 1 deletion(-)
>
>diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
>index f09810e3d956..a7d2384cbbe8 100644
>--- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
>+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
>@@ -20,7 +20,7 @@ aliases {
> serial0 = &qup2_uart17;
> };
>
>- backlight {
>+ backlight: backlight {
> compatible = "pwm-backlight";
> pwms = <&pmc8280c_lpg 3 1000000>;
> enable-gpios = <&pmc8280_1_gpios 8 GPIO_ACTIVE_HIGH>;
>@@ -34,6 +34,22 @@ chosen {
> stdout-path = "serial0:115200n8";
> };
>
>+ vreg_edp_3p3: regulator-edp-3p3 {
>+ compatible = "regulator-fixed";
>+
>+ regulator-name = "VREG_EDP_3P3";
>+ regulator-min-microvolt = <3300000>;
>+ regulator-max-microvolt = <3300000>;
>+
>+ gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
>+ enable-active-high;
>+
>+ pinctrl-names = "default";
>+ pinctrl-0 = <&edp_reg_en>;
>+
>+ regulator-boot-on;
>+ };
>+
> vreg_edp_bl: regulator-edp-bl {
> compatible = "regulator-fixed";
>
>@@ -230,6 +246,54 @@ vreg_l9d: ldo9 {
> };
> };
>
>+&dispcc0 {
>+ status = "okay";
>+};
>+
>+&mdss0 {
>+ status = "okay";
>+};
>+
>+&mdss0_dp3 {
>+ compatible = "qcom,sc8280xp-edp";
>+ status = "okay";
>+
>+ data-lanes = <0 1 2 3>;
>+
>+ aux-bus {
>+ panel {
>+ compatible = "edp-panel";
>+ power-supply = <&vreg_edp_3p3>;
>+
>+ backlight = <&backlight>;
>+
>+ ports {
>+ port {
>+ edp_panel_in: endpoint {
>+ remote-endpoint = <&mdss0_dp3_out>;
>+ };
>+ };
>+ };
>+ };
>+ };
>+
>+ ports {
>+ port@1 {
>+ reg = <1>;
You already have reg assignment in the SoC dtsi.
>+ mdss0_dp3_out: endpoint {
>+ remote-endpoint = <&edp_panel_in>;
>+ };
>+ };
>+ };
>+};
>+
>+&mdss0_dp3_phy {
>+ status = "okay";
>+
>+ vdda-phy-supply = <&vreg_l6b>;
>+ vdda-pll-supply = <&vreg_l3b>;
>+};
>+
> &pcie2a {
> perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
> wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
>@@ -496,6 +560,12 @@ hastings_reg_en: hastings-reg-en-state {
> &tlmm {
> gpio-reserved-ranges = <74 6>, <83 4>, <125 2>, <128 2>, <154 7>;
>
>+ edp_reg_en: edp-reg-en-state {
>+ pins = "gpio25";
>+ function = "gpio";
>+ output-enable;
>+ };
>+
> kybd_default: kybd-default-state {
> disable-pins {
> pins = "gpio102";
--
With best wishes
Dmitry
Powered by blists - more mailing lists