| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <3a9b5a27-e18f-226b-065b-f09c568b4d85@linaro.org>
Date: Mon, 5 Dec 2022 10:21:59 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Xiangsheng Hou <xiangsheng.hou@...iatek.com>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Richard Weinberger <richard@....at>,
Vignesh Raghavendra <vigneshr@...com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Matthias Brugger <matthias.bgg@...il.com>,
Mark Brown <broonie@...nel.org>,
Chuanhong Guo <gch981213@...il.com>
Cc: linux-mtd@...ts.infradead.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-spi@...r.kernel.org, benliang.zhao@...iatek.com,
bin.zhang@...iatek.com
Subject: Re: [PATCH v2 8/9] dt-bindings: mtd: Split ECC engine with rawnand
controller
On 05/12/2022 07:57, Xiangsheng Hou wrote:
> 1. Split MediaTek ECC engine with rawnand controller and convert to
> YAML schema.
> 2. Change the existing node name in order to match NAND controller DT
> bindings.
One patch - one logical change. Not two. This applies to all your
patches, so whenever you want to enumerate, please think twice.
>
> Signed-off-by: Xiangsheng Hou <xiangsheng.hou@...iatek.com>
> ---
> .../bindings/mtd/mediatek,mtk-nfc.yaml | 171 +++++++++++++++++
> .../mtd/mediatek,nand-ecc-engine.yaml | 62 ++++++
> .../devicetree/bindings/mtd/mtk-nand.txt | 176 ------------------
> arch/arm/boot/dts/mt2701.dtsi | 2 +-
> arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 2 +-
> arch/arm64/boot/dts/mediatek/mt7622.dtsi | 2 +-
Do not combine bindings and DTS.
> 6 files changed, 236 insertions(+), 179 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml
> create mode 100644 Documentation/devicetree/bindings/mtd/mediatek,nand-ecc-engine.yaml
> delete mode 100644 Documentation/devicetree/bindings/mtd/mtk-nand.txt
>
> diff --git a/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml b/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml
> new file mode 100644
> index 000000000000..2b1c92edc9d0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml
> @@ -0,0 +1,171 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mtd/mediatek,mtk-nfc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MediaTek(MTK) SoCs raw NAND FLASH controller (NFC)
> +
> +maintainers:
> + - Xiangsheng Hou <xiangsheng.hou@...iatek.com>
> +
> +properties:
> + compatible:
> + enum:
> + - mediatek,mt2701-nfc
> + - mediatek,mt2712-nfc
> + - mediatek,mt7622-nfc
> +
> + reg:
> + items:
> + - description: Base physical address and size of NFI.
> +
> + interrupts:
> + items:
> + - description: NFI interrupt
> +
> + clocks:
> + items:
> + - description: clock used for the controller
> + - description: clock used for the pad
> +
> + clock-names:
> + items:
> + - const: nfi_clk
> + - const: pad_clk
> +
> + ecc-engine: true
I don't think this could be anything. You need to describe it, so $ref
and description.
> +
> + partitions:
> + $ref: mtd.yaml#
How the partitions are MTD device? Open that file and see how it should
be defined... Anyway mtd.yaml is part of nand-chip, not nand-controller.
> +
> +allOf:
> + - $ref: nand-controller.yaml#
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: mediatek,mt2701-nfc
> + then:
> + patternProperties:
> + "^nand@[a-f0-9]$":
> + type: object
No need for type, the definition is already there through
nand-controller.yaml.
> + properties:
> + reg:
> + minimum: 0
> + maximum: 1
This is the same as other variant, so should be defined in top-level
pattern properties.
> + nand-ecc-mode:
> + const: hw
Ditto
> + nand-ecc-step-size:
> + enum: [ 512, 1024 ]> + nand-ecc-strength:
> + enum: [4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, 32, 36,
> + 40, 44, 48, 52, 56, 60]
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: mediatek,mt2712-nfc
> + then:
> + patternProperties:
> + "^nand@[a-f0-9]$":
> + type: object
> + properties:
> + reg:
> + minimum: 0
> + maximum: 1
> + nand-ecc-mode:
> + const: hw
> + nand-ecc-step-size:
> + enum: [ 512, 1024 ]
> + nand-ecc-strength:
> + enum: [4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, 32, 36,
> + 40, 44, 48, 52, 56, 60, 68, 72, 80]
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: mediatek,mt7622-nfc
> + then:
> + patternProperties:
> + "^nand@[a-f0-9]$":
> + type: object
> + properties:
> + reg:
> + minimum: 0
> + maximum: 1
> + nand-ecc-mode:
> + const: hw
> + nand-ecc-step-size:
> + const: 512
> + nand-ecc-strength:
> + enum: [4, 6, 8, 10, 12]
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> + - ecc-engine
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/mt2701-clk.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + nand-controller@...0d000 {
> + compatible = "mediatek,mt2701-nfc";
> + reg = <0 0x1100d000 0 0x1000>;
> + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&pericfg CLK_PERI_NFI>,
> + <&pericfg CLK_PERI_NFI_PAD>;
> + clock-names = "nfi_clk", "pad_clk";
> + ecc-engine = <&bch>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + nand@0 {
> + reg = <0>;
> +
> + nand-on-flash-bbt;
> + nand-ecc-mode = "hw";
> + nand-ecc-step-size = <1024>;
> + nand-ecc-strength = <24>;
> +
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + preloader@0 {
> + label = "pl";
> + read-only;
> + reg = <0x0 0x400000>;
> + };
> + android@...000 {
> + label = "android";
> + reg = <0x400000 0x12c00000>;
> + };
> + };
> + };
> + };
> +
> + bch: ecc@...0e000 {
> + compatible = "mediatek,mt2701-ecc";
> + reg = <0 0x1100e000 0 0x1000>;
> + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&pericfg CLK_PERI_NFI_ECC>;
> + clock-names = "nfiecc_clk";
You already have example of ecc in other binding, so drop from this one.
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/mtd/mediatek,nand-ecc-engine.yaml b/Documentation/devicetree/bindings/mtd/mediatek,nand-ecc-engine.yaml
> new file mode 100644
> index 000000000000..b13d801eda76
> --- /dev/null
Best regards,
Krzysztof
Powered by blists - more mailing lists