| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <e03f71d6d0f6f205b99070813234087299ef1a02.1670204277.git.piergiorgio.beruto@gmail.com>
Date: Mon, 5 Dec 2022 02:42:50 +0100
From: Piergiorgio Beruto <piergiorgio.beruto@...il.com>
To: Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>
Cc: linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
Oleksij Rempel <o.rempel@...gutronix.de>
Subject: [PATCH v2 net-next 3/4] drivers/net/phy: add connection between
ethtool and phylib for PLCA
This patch adds the required connection between netlink ethtool and
phylib to resolve PLCA get/set config and get status messages.
Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@...il.com>
---
drivers/net/phy/phy.c | 163 +++++++++++++++++++++++++++++++++++++++---
include/linux/phy.h | 17 ++++-
2 files changed, 168 insertions(+), 12 deletions(-)
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 99e3497b6aa1..6bea928e405b 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -544,36 +544,181 @@ int phy_ethtool_get_stats(struct phy_device *phydev,
EXPORT_SYMBOL(phy_ethtool_get_stats);
/**
+ * phy_ethtool_get_plca_cfg - Get PLCA RS configuration
*
+ * @phydev: the phy_device struct
+ * @plca_cfg: where to store the retrieved configuration
*/
-int phy_ethtool_get_plca_cfg(struct phy_device *dev,
+int phy_ethtool_get_plca_cfg(struct phy_device *phydev,
struct phy_plca_cfg *plca_cfg)
{
- // TODO
- return 0;
+ int ret;
+
+ if (!phydev->drv) {
+ ret = -EIO;
+ goto out;
+ }
+
+ if (!phydev->drv->get_plca_cfg) {
+ ret = -EOPNOTSUPP;
+ goto out;
+ }
+
+ memset(plca_cfg, 0xFF, sizeof(*plca_cfg));
+
+ mutex_lock(&phydev->lock);
+ ret = phydev->drv->get_plca_cfg(phydev, plca_cfg);
+
+ if (ret)
+ goto out_drv;
+
+out_drv:
+ mutex_unlock(&phydev->lock);
+out:
+ return ret;
}
EXPORT_SYMBOL(phy_ethtool_get_plca_cfg);
/**
+ * phy_ethtool_set_plca_cfg - Set PLCA RS configuration
*
+ * @phydev: the phy_device struct
+ * @extack: extack for reporting useful error messages
+ * @plca_cfg: new PLCA configuration to apply
*/
-int phy_ethtool_set_plca_cfg(struct phy_device *dev,
+int phy_ethtool_set_plca_cfg(struct phy_device *phydev,
struct netlink_ext_ack *extack,
const struct phy_plca_cfg *plca_cfg)
{
- // TODO
- return 0;
+ int ret;
+ struct phy_plca_cfg *curr_plca_cfg = 0;
+
+ if (!phydev->drv) {
+ ret = -EIO;
+ goto out;
+ }
+
+ if (!phydev->drv->set_plca_cfg ||
+ !phydev->drv->get_plca_cfg) {
+ ret = -EOPNOTSUPP;
+ goto out;
+ }
+
+ curr_plca_cfg = kmalloc(sizeof(*curr_plca_cfg), GFP_KERNEL);
+ memset(curr_plca_cfg, 0xFF, sizeof(*curr_plca_cfg));
+
+ mutex_lock(&phydev->lock);
+
+ ret = phydev->drv->get_plca_cfg(phydev, curr_plca_cfg);
+ if (ret)
+ goto out_drv;
+
+ if (curr_plca_cfg->enabled < 0 && plca_cfg->enabled >= 0) {
+ NL_SET_ERR_MSG(extack,
+ "PHY does not support changing the PLCA 'enable' attribute");
+ ret = -EINVAL;
+ goto out_drv;
+ }
+
+ if (curr_plca_cfg->node_id < 0 && plca_cfg->node_id >= 0) {
+ NL_SET_ERR_MSG(extack,
+ "PHY does not support changing the PLCA 'local node ID' attribute");
+ ret = -EINVAL;
+ goto out_drv;
+ }
+
+ if (curr_plca_cfg->node_cnt < 0 && plca_cfg->node_cnt >= 0) {
+ NL_SET_ERR_MSG(extack,
+ "PHY does not support changing the PLCA 'node count' attribute");
+ ret = -EINVAL;
+ goto out_drv;
+ }
+
+ if (curr_plca_cfg->to_tmr < 0 && plca_cfg->to_tmr >= 0) {
+ NL_SET_ERR_MSG(extack,
+ "PHY does not support changing the PLCA 'TO timer' attribute");
+ ret = -EINVAL;
+ goto out_drv;
+ }
+
+ if (curr_plca_cfg->burst_cnt < 0 && plca_cfg->burst_cnt >= 0) {
+ NL_SET_ERR_MSG(extack,
+ "PHY does not support changing the PLCA 'burst count' attribute");
+ ret = -EINVAL;
+ goto out_drv;
+ }
+
+ if (curr_plca_cfg->burst_tmr < 0 && plca_cfg->burst_tmr >= 0) {
+ NL_SET_ERR_MSG(extack,
+ "PHY does not support changing the PLCA 'burst timer' attribute");
+ ret = -EINVAL;
+ goto out_drv;
+ }
+
+ // if enabling PLCA, perform additional sanity checks
+ if (plca_cfg->enabled > 0) {
+ if (!linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT1S_P2MP_Half_BIT,
+ phydev->advertising)) {
+ ret = -EOPNOTSUPP;
+ NL_SET_ERR_MSG(extack,
+ "Point to Multi-Point mode is not enabled");
+ }
+
+ // allow setting node_id concurrently with enabled
+ if (plca_cfg->node_id >= 0)
+ curr_plca_cfg->node_id = plca_cfg->node_id;
+
+ if (curr_plca_cfg->node_id >= 255) {
+ NL_SET_ERR_MSG(extack, "PLCA node ID is not set");
+ ret = -EINVAL;
+ goto out_drv;
+ }
+ }
+
+ ret = phydev->drv->set_plca_cfg(phydev, plca_cfg);
+ if (ret)
+ goto out_drv;
+
+out_drv:
+ kfree(curr_plca_cfg);
+ mutex_unlock(&phydev->lock);
+out:
+ return ret;
+
}
EXPORT_SYMBOL(phy_ethtool_set_plca_cfg);
/**
+ * phy_ethtool_get_plca_status - Get PLCA RS status information
*
+ * @phydev: the phy_device struct
+ * @plca_st: where to store the retrieved status information
*/
-int phy_ethtool_get_plca_status(struct phy_device *dev,
+int phy_ethtool_get_plca_status(struct phy_device *phydev,
struct phy_plca_status *plca_st)
{
- // TODO
- return 0;
+ int ret;
+
+ if (!phydev->drv) {
+ ret = -EIO;
+ goto out;
+ }
+
+ if (!phydev->drv->get_plca_status) {
+ ret = -EOPNOTSUPP;
+ goto out;
+ }
+
+ mutex_lock(&phydev->lock);
+ ret = phydev->drv->get_plca_status(phydev, plca_st);
+
+ if (ret)
+ goto out_drv;
+
+out_drv:
+ mutex_unlock(&phydev->lock);
+out:
+ return ret;
}
EXPORT_SYMBOL(phy_ethtool_get_plca_status);
diff --git a/include/linux/phy.h b/include/linux/phy.h
index ab2c134d0a05..49d0488bf480 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1036,6 +1036,17 @@ struct phy_driver {
int (*get_sqi)(struct phy_device *dev);
/** @get_sqi_max: Get the maximum signal quality indication */
int (*get_sqi_max)(struct phy_device *dev);
+
+ /* PLCA RS interface */
+ /** @get_plca_cfg: Return the current PLCA configuration */
+ int (*get_plca_cfg)(struct phy_device *dev,
+ struct phy_plca_cfg *plca_cfg);
+ /** @set_plca_cfg: Set the PLCA configuration */
+ int (*set_plca_cfg)(struct phy_device *dev,
+ const struct phy_plca_cfg *plca_cfg);
+ /** @get_plca_status: Return the current PLCA status info */
+ int (*get_plca_status)(struct phy_device *dev,
+ struct phy_plca_status *plca_st);
};
#define to_phy_driver(d) container_of(to_mdio_common_driver(d), \
struct phy_driver, mdiodrv)
@@ -1832,12 +1843,12 @@ int phy_ethtool_get_strings(struct phy_device *phydev, u8 *data);
int phy_ethtool_get_sset_count(struct phy_device *phydev);
int phy_ethtool_get_stats(struct phy_device *phydev,
struct ethtool_stats *stats, u64 *data);
-int phy_ethtool_get_plca_cfg(struct phy_device *dev,
+int phy_ethtool_get_plca_cfg(struct phy_device *phydev,
struct phy_plca_cfg *plca_cfg);
-int phy_ethtool_set_plca_cfg(struct phy_device *dev,
+int phy_ethtool_set_plca_cfg(struct phy_device *phydev,
struct netlink_ext_ack *extack,
const struct phy_plca_cfg *plca_cfg);
-int phy_ethtool_get_plca_status(struct phy_device *dev,
+int phy_ethtool_get_plca_status(struct phy_device *phydev,
struct phy_plca_status *plca_st);
static inline int phy_package_read(struct phy_device *phydev, u32 regnum)
--
2.35.1
Powered by blists - more mailing lists