Message-ID: <caa0e7a8-f222-b190-12a6-a36996affee2@opensource.wdc.com>
Date:   Mon, 5 Dec 2022 22:33:26 +0900
From:   Damien Le Moal <damien.lemoal@...nsource.wdc.com>
To:     Arnd Bergmann <arnd@...nel.org>
Cc:     linux-kernel@...r.kernel.org, Arnd Bergmann <arnd@...db.de>,
        Luis Machado <luis.machado@....com>, linux-ide@...r.kernel.org,
        stable@...r.kernel.org, Randy Dunlap <rdunlap@...radead.org>
Subject: Re: [PATCH] [v2] ata: ahci: fix enum constants for gcc-13

On 12/3/22 19:54, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@...db.de>
> 
> gcc-13 slightly changes the type of constant expressions that are defined
> in an enum, which triggers a compile time sanity check in libata:
> 
> linux/drivers/ata/libahci.c: In function 'ahci_led_store':
> linux/include/linux/compiler_types.h:357:45: error: call to '__compiletime_assert_302' declared with attribute error: BUILD_BUG_ON failed: sizeof(_s) > sizeof(long)
> 357 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
> 
> The new behavior is that sizeof() returns the same value for the
> constant as it does for the enum type, which is generally more sensible
> and consistent.
> 
> The problem in libata is that it contains a single enum definition for
> lots of unrelated constants, some of which are large positive (unsigned)
> integers like 0xffffffff, while others like (1<<31) are interpreted as
> negative integers, and this forces the enum type to become 64 bit wide
> even though most constants would still fit into a signed 32-bit 'int'.
> 
> Fix this by changing the entire enum definition to use BIT(x) in place
> of (1<<x), which results in all values being seen as 'unsigned' and
> fitting into an unsigned 32-bit type.
> 
> Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=107917
> Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=107405
> Reported-by: Luis Machado <luis.machado@....com>
> Cc: linux-ide@...r.kernel.org
> Cc: Damien Le Moal <damien.lemoal@...nsource.wdc.com>
> Cc: stable@...r.kernel.org
> Cc: Randy Dunlap <rdunlap@...radead.org>
> Signed-off-by: Arnd Bergmann <arnd@...db.de>

Looks all good to me. One nit: for the PORT_CMD_ICC_XXX definitions, we
could use GENMASK() to be consistant with the use of BIT(), no ? Not a big
deal though.

> ---
> Luis, I don't have gcc-13 installed on the machine I used for
> creating this patch, can you give this a spin and see if it
> addresses the build failure?

Luis, if you test/review, please send Tested-by/Reviewed-by tags !

> 
> v2 changes:
>  - fix typos in changelog
>  - change PORT_CMD_ICC_* constants as well
>  - include linux/bits.h
> ---
>  drivers/ata/ahci.h | 245 +++++++++++++++++++++++----------------------
>  1 file changed, 123 insertions(+), 122 deletions(-)
> 
> diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
> index 7add8e79912b..ff8e6ae1c636 100644
> --- a/drivers/ata/ahci.h
> +++ b/drivers/ata/ahci.h
> @@ -24,6 +24,7 @@
>  #include <linux/libata.h>
>  #include <linux/phy/phy.h>
>  #include <linux/regulator/consumer.h>
> +#include <linux/bits.h>
>  
>  /* Enclosure Management Control */
>  #define EM_CTRL_MSG_TYPE              0x000f0000
> @@ -53,12 +54,12 @@ enum {
>  	AHCI_PORT_PRIV_FBS_DMA_SZ	= AHCI_CMD_SLOT_SZ +
>  					  AHCI_CMD_TBL_AR_SZ +
>  					  (AHCI_RX_FIS_SZ * 16),
> -	AHCI_IRQ_ON_SG		= (1 << 31),
> -	AHCI_CMD_ATAPI		= (1 << 5),
> -	AHCI_CMD_WRITE		= (1 << 6),
> -	AHCI_CMD_PREFETCH	= (1 << 7),
> -	AHCI_CMD_RESET		= (1 << 8),
> -	AHCI_CMD_CLR_BUSY	= (1 << 10),
> +	AHCI_IRQ_ON_SG		= BIT(31),
> +	AHCI_CMD_ATAPI		= BIT(5),
> +	AHCI_CMD_WRITE		= BIT(6),
> +	AHCI_CMD_PREFETCH	= BIT(7),
> +	AHCI_CMD_RESET		= BIT(8),
> +	AHCI_CMD_CLR_BUSY	= BIT(10),
>  
>  	RX_FIS_PIO_SETUP	= 0x20,	/* offset of PIO Setup FIS data */
>  	RX_FIS_D2H_REG		= 0x40,	/* offset of D2H Register FIS data */
> @@ -76,37 +77,37 @@ enum {
>  	HOST_CAP2		= 0x24, /* host capabilities, extended */
>  
>  	/* HOST_CTL bits */
> -	HOST_RESET		= (1 << 0),  /* reset controller; self-clear */
> -	HOST_IRQ_EN		= (1 << 1),  /* global IRQ enable */
> -	HOST_MRSM		= (1 << 2),  /* MSI Revert to Single Message */
> -	HOST_AHCI_EN		= (1 << 31), /* AHCI enabled */
> +	HOST_RESET		= BIT(0),  /* reset controller; self-clear */
> +	HOST_IRQ_EN		= BIT(1),  /* global IRQ enable */
> +	HOST_MRSM		= BIT(2),  /* MSI Revert to Single Message */
> +	HOST_AHCI_EN		= BIT(31), /* AHCI enabled */
>  
>  	/* HOST_CAP bits */
> -	HOST_CAP_SXS		= (1 << 5),  /* Supports External SATA */
> -	HOST_CAP_EMS		= (1 << 6),  /* Enclosure Management support */
> -	HOST_CAP_CCC		= (1 << 7),  /* Command Completion Coalescing */
> -	HOST_CAP_PART		= (1 << 13), /* Partial state capable */
> -	HOST_CAP_SSC		= (1 << 14), /* Slumber state capable */
> -	HOST_CAP_PIO_MULTI	= (1 << 15), /* PIO multiple DRQ support */
> -	HOST_CAP_FBS		= (1 << 16), /* FIS-based switching support */
> -	HOST_CAP_PMP		= (1 << 17), /* Port Multiplier support */
> -	HOST_CAP_ONLY		= (1 << 18), /* Supports AHCI mode only */
> -	HOST_CAP_CLO		= (1 << 24), /* Command List Override support */
> -	HOST_CAP_LED		= (1 << 25), /* Supports activity LED */
> -	HOST_CAP_ALPM		= (1 << 26), /* Aggressive Link PM support */
> -	HOST_CAP_SSS		= (1 << 27), /* Staggered Spin-up */
> -	HOST_CAP_MPS		= (1 << 28), /* Mechanical presence switch */
> -	HOST_CAP_SNTF		= (1 << 29), /* SNotification register */
> -	HOST_CAP_NCQ		= (1 << 30), /* Native Command Queueing */
> -	HOST_CAP_64		= (1 << 31), /* PCI DAC (64-bit DMA) support */
> +	HOST_CAP_SXS		= BIT(5),  /* Supports External SATA */
> +	HOST_CAP_EMS		= BIT(6),  /* Enclosure Management support */
> +	HOST_CAP_CCC		= BIT(7),  /* Command Completion Coalescing */
> +	HOST_CAP_PART		= BIT(13), /* Partial state capable */
> +	HOST_CAP_SSC		= BIT(14), /* Slumber state capable */
> +	HOST_CAP_PIO_MULTI	= BIT(15), /* PIO multiple DRQ support */
> +	HOST_CAP_FBS		= BIT(16), /* FIS-based switching support */
> +	HOST_CAP_PMP		= BIT(17), /* Port Multiplier support */
> +	HOST_CAP_ONLY		= BIT(18), /* Supports AHCI mode only */
> +	HOST_CAP_CLO		= BIT(24), /* Command List Override support */
> +	HOST_CAP_LED		= BIT(25), /* Supports activity LED */
> +	HOST_CAP_ALPM		= BIT(26), /* Aggressive Link PM support */
> +	HOST_CAP_SSS		= BIT(27), /* Staggered Spin-up */
> +	HOST_CAP_MPS		= BIT(28), /* Mechanical presence switch */
> +	HOST_CAP_SNTF		= BIT(29), /* SNotification register */
> +	HOST_CAP_NCQ		= BIT(30), /* Native Command Queueing */
> +	HOST_CAP_64		= BIT(31), /* PCI DAC (64-bit DMA) support */
>  
>  	/* HOST_CAP2 bits */
> -	HOST_CAP2_BOH		= (1 << 0),  /* BIOS/OS handoff supported */
> -	HOST_CAP2_NVMHCI	= (1 << 1),  /* NVMHCI supported */
> -	HOST_CAP2_APST		= (1 << 2),  /* Automatic partial to slumber */
> -	HOST_CAP2_SDS		= (1 << 3),  /* Support device sleep */
> -	HOST_CAP2_SADM		= (1 << 4),  /* Support aggressive DevSlp */
> -	HOST_CAP2_DESO		= (1 << 5),  /* DevSlp from slumber only */
> +	HOST_CAP2_BOH		= BIT(0),  /* BIOS/OS handoff supported */
> +	HOST_CAP2_NVMHCI	= BIT(1),  /* NVMHCI supported */
> +	HOST_CAP2_APST		= BIT(2),  /* Automatic partial to slumber */
> +	HOST_CAP2_SDS		= BIT(3),  /* Support device sleep */
> +	HOST_CAP2_SADM		= BIT(4),  /* Support aggressive DevSlp */
> +	HOST_CAP2_DESO		= BIT(5),  /* DevSlp from slumber only */
>  
>  	/* registers for each SATA port */
>  	PORT_LST_ADDR		= 0x00, /* command list DMA addr */
> @@ -128,24 +129,24 @@ enum {
>  	PORT_DEVSLP		= 0x44, /* device sleep */
>  
>  	/* PORT_IRQ_{STAT,MASK} bits */
> -	PORT_IRQ_COLD_PRES	= (1 << 31), /* cold presence detect */
> -	PORT_IRQ_TF_ERR		= (1 << 30), /* task file error */
> -	PORT_IRQ_HBUS_ERR	= (1 << 29), /* host bus fatal error */
> -	PORT_IRQ_HBUS_DATA_ERR	= (1 << 28), /* host bus data error */
> -	PORT_IRQ_IF_ERR		= (1 << 27), /* interface fatal error */
> -	PORT_IRQ_IF_NONFATAL	= (1 << 26), /* interface non-fatal error */
> -	PORT_IRQ_OVERFLOW	= (1 << 24), /* xfer exhausted available S/G */
> -	PORT_IRQ_BAD_PMP	= (1 << 23), /* incorrect port multiplier */
> -
> -	PORT_IRQ_PHYRDY		= (1 << 22), /* PhyRdy changed */
> -	PORT_IRQ_DMPS		= (1 << 7), /* mechanical presence status */
> -	PORT_IRQ_CONNECT	= (1 << 6), /* port connect change status */
> -	PORT_IRQ_SG_DONE	= (1 << 5), /* descriptor processed */
> -	PORT_IRQ_UNK_FIS	= (1 << 4), /* unknown FIS rx'd */
> -	PORT_IRQ_SDB_FIS	= (1 << 3), /* Set Device Bits FIS rx'd */
> -	PORT_IRQ_DMAS_FIS	= (1 << 2), /* DMA Setup FIS rx'd */
> -	PORT_IRQ_PIOS_FIS	= (1 << 1), /* PIO Setup FIS rx'd */
> -	PORT_IRQ_D2H_REG_FIS	= (1 << 0), /* D2H Register FIS rx'd */
> +	PORT_IRQ_COLD_PRES	= BIT(31), /* cold presence detect */
> +	PORT_IRQ_TF_ERR		= BIT(30), /* task file error */
> +	PORT_IRQ_HBUS_ERR	= BIT(29), /* host bus fatal error */
> +	PORT_IRQ_HBUS_DATA_ERR	= BIT(28), /* host bus data error */
> +	PORT_IRQ_IF_ERR		= BIT(27), /* interface fatal error */
> +	PORT_IRQ_IF_NONFATAL	= BIT(26), /* interface non-fatal error */
> +	PORT_IRQ_OVERFLOW	= BIT(24), /* xfer exhausted available S/G */
> +	PORT_IRQ_BAD_PMP	= BIT(23), /* incorrect port multiplier */
> +
> +	PORT_IRQ_PHYRDY		= BIT(22), /* PhyRdy changed */
> +	PORT_IRQ_DMPS		= BIT(7),  /* mechanical presence status */
> +	PORT_IRQ_CONNECT	= BIT(6),  /* port connect change status */
> +	PORT_IRQ_SG_DONE	= BIT(5),  /* descriptor processed */
> +	PORT_IRQ_UNK_FIS	= BIT(4),  /* unknown FIS rx'd */
> +	PORT_IRQ_SDB_FIS	= BIT(3),  /* Set Device Bits FIS rx'd */
> +	PORT_IRQ_DMAS_FIS	= BIT(2),  /* DMA Setup FIS rx'd */
> +	PORT_IRQ_PIOS_FIS	= BIT(1),  /* PIO Setup FIS rx'd */
> +	PORT_IRQ_D2H_REG_FIS	= BIT(0),  /* D2H Register FIS rx'd */
>  
>  	PORT_IRQ_FREEZE		= PORT_IRQ_HBUS_ERR |
>  				  PORT_IRQ_IF_ERR |
> @@ -161,27 +162,27 @@ enum {
>  				  PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS,
>  
>  	/* PORT_CMD bits */
> -	PORT_CMD_ASP		= (1 << 27), /* Aggressive Slumber/Partial */
> -	PORT_CMD_ALPE		= (1 << 26), /* Aggressive Link PM enable */
> -	PORT_CMD_ATAPI		= (1 << 24), /* Device is ATAPI */
> -	PORT_CMD_FBSCP		= (1 << 22), /* FBS Capable Port */
> -	PORT_CMD_ESP		= (1 << 21), /* External Sata Port */
> -	PORT_CMD_CPD		= (1 << 20), /* Cold Presence Detection */
> -	PORT_CMD_MPSP		= (1 << 19), /* Mechanical Presence Switch */
> -	PORT_CMD_HPCP		= (1 << 18), /* HotPlug Capable Port */
> -	PORT_CMD_PMP		= (1 << 17), /* PMP attached */
> -	PORT_CMD_LIST_ON	= (1 << 15), /* cmd list DMA engine running */
> -	PORT_CMD_FIS_ON		= (1 << 14), /* FIS DMA engine running */
> -	PORT_CMD_FIS_RX		= (1 << 4), /* Enable FIS receive DMA engine */
> -	PORT_CMD_CLO		= (1 << 3), /* Command list override */
> -	PORT_CMD_POWER_ON	= (1 << 2), /* Power up device */
> -	PORT_CMD_SPIN_UP	= (1 << 1), /* Spin up device */
> -	PORT_CMD_START		= (1 << 0), /* Enable port DMA engine */
> -
> -	PORT_CMD_ICC_MASK	= (0xf << 28), /* i/f ICC state mask */
> -	PORT_CMD_ICC_ACTIVE	= (0x1 << 28), /* Put i/f in active state */
> -	PORT_CMD_ICC_PARTIAL	= (0x2 << 28), /* Put i/f in partial state */
> -	PORT_CMD_ICC_SLUMBER	= (0x6 << 28), /* Put i/f in slumber state */
> +	PORT_CMD_ASP		= BIT(27), /* Aggressive Slumber/Partial */
> +	PORT_CMD_ALPE		= BIT(26), /* Aggressive Link PM enable */
> +	PORT_CMD_ATAPI		= BIT(24), /* Device is ATAPI */
> +	PORT_CMD_FBSCP		= BIT(22), /* FBS Capable Port */
> +	PORT_CMD_ESP		= BIT(21), /* External Sata Port */
> +	PORT_CMD_CPD		= BIT(20), /* Cold Presence Detection */
> +	PORT_CMD_MPSP		= BIT(19), /* Mechanical Presence Switch */
> +	PORT_CMD_HPCP		= BIT(18), /* HotPlug Capable Port */
> +	PORT_CMD_PMP		= BIT(17), /* PMP attached */
> +	PORT_CMD_LIST_ON	= BIT(15), /* cmd list DMA engine running */
> +	PORT_CMD_FIS_ON		= BIT(14), /* FIS DMA engine running */
> +	PORT_CMD_FIS_RX		= BIT(4),  /* Enable FIS receive DMA engine */
> +	PORT_CMD_CLO		= BIT(3),  /* Command list override */
> +	PORT_CMD_POWER_ON	= BIT(2),  /* Power up device */
> +	PORT_CMD_SPIN_UP	= BIT(1),  /* Spin up device */
> +	PORT_CMD_START		= BIT(0),  /* Enable port DMA engine */
> +
> +	PORT_CMD_ICC_MASK	= (0xfu << 28), /* i/f ICC state mask */
> +	PORT_CMD_ICC_ACTIVE	= (0x1u << 28), /* Put i/f in active state */
> +	PORT_CMD_ICC_PARTIAL	= (0x2u << 28), /* Put i/f in partial state */
> +	PORT_CMD_ICC_SLUMBER	= (0x6u << 28), /* Put i/f in slumber state */
>  
>  	/* PORT_CMD capabilities mask */
>  	PORT_CMD_CAP		= PORT_CMD_HPCP | PORT_CMD_MPSP |
> @@ -192,9 +193,9 @@ enum {
>  	PORT_FBS_ADO_OFFSET	= 12, /* FBS active dev optimization offset */
>  	PORT_FBS_DEV_OFFSET	= 8,  /* FBS device to issue offset */
>  	PORT_FBS_DEV_MASK	= (0xf << PORT_FBS_DEV_OFFSET),  /* FBS.DEV */
> -	PORT_FBS_SDE		= (1 << 2), /* FBS single device error */
> -	PORT_FBS_DEC		= (1 << 1), /* FBS device error clear */
> -	PORT_FBS_EN		= (1 << 0), /* Enable FBS */
> +	PORT_FBS_SDE		= BIT(2), /* FBS single device error */
> +	PORT_FBS_DEC		= BIT(1), /* FBS device error clear */
> +	PORT_FBS_EN		= BIT(0), /* Enable FBS */
>  
>  	/* PORT_DEVSLP bits */
>  	PORT_DEVSLP_DM_OFFSET	= 25,             /* DITO multiplier offset */
> @@ -202,50 +203,50 @@ enum {
>  	PORT_DEVSLP_DITO_OFFSET	= 15,             /* DITO offset */
>  	PORT_DEVSLP_MDAT_OFFSET	= 10,             /* Minimum assertion time */
>  	PORT_DEVSLP_DETO_OFFSET	= 2,              /* DevSlp exit timeout */
> -	PORT_DEVSLP_DSP		= (1 << 1),       /* DevSlp present */
> -	PORT_DEVSLP_ADSE	= (1 << 0),       /* Aggressive DevSlp enable */
> +	PORT_DEVSLP_DSP		= BIT(1),         /* DevSlp present */
> +	PORT_DEVSLP_ADSE	= BIT(0),         /* Aggressive DevSlp enable */
>  
>  	/* hpriv->flags bits */
>  
>  #define AHCI_HFLAGS(flags)		.private_data	= (void *)(flags)
>  
> -	AHCI_HFLAG_NO_NCQ		= (1 << 0),
> -	AHCI_HFLAG_IGN_IRQ_IF_ERR	= (1 << 1), /* ignore IRQ_IF_ERR */
> -	AHCI_HFLAG_IGN_SERR_INTERNAL	= (1 << 2), /* ignore SERR_INTERNAL */
> -	AHCI_HFLAG_32BIT_ONLY		= (1 << 3), /* force 32bit */
> -	AHCI_HFLAG_MV_PATA		= (1 << 4), /* PATA port */
> -	AHCI_HFLAG_NO_MSI		= (1 << 5), /* no PCI MSI */
> -	AHCI_HFLAG_NO_PMP		= (1 << 6), /* no PMP */
> -	AHCI_HFLAG_SECT255		= (1 << 8), /* max 255 sectors */
> -	AHCI_HFLAG_YES_NCQ		= (1 << 9), /* force NCQ cap on */
> -	AHCI_HFLAG_NO_SUSPEND		= (1 << 10), /* don't suspend */
> -	AHCI_HFLAG_SRST_TOUT_IS_OFFLINE	= (1 << 11), /* treat SRST timeout as
> -							link offline */
> -	AHCI_HFLAG_NO_SNTF		= (1 << 12), /* no sntf */
> -	AHCI_HFLAG_NO_FPDMA_AA		= (1 << 13), /* no FPDMA AA */
> -	AHCI_HFLAG_YES_FBS		= (1 << 14), /* force FBS cap on */
> -	AHCI_HFLAG_DELAY_ENGINE		= (1 << 15), /* do not start engine on
> -						        port start (wait until
> -						        error-handling stage) */
> -	AHCI_HFLAG_NO_DEVSLP		= (1 << 17), /* no device sleep */
> -	AHCI_HFLAG_NO_FBS		= (1 << 18), /* no FBS */
> +	AHCI_HFLAG_NO_NCQ		= BIT(0),
> +	AHCI_HFLAG_IGN_IRQ_IF_ERR	= BIT(1), /* ignore IRQ_IF_ERR */
> +	AHCI_HFLAG_IGN_SERR_INTERNAL	= BIT(2), /* ignore SERR_INTERNAL */
> +	AHCI_HFLAG_32BIT_ONLY		= BIT(3), /* force 32bit */
> +	AHCI_HFLAG_MV_PATA		= BIT(4), /* PATA port */
> +	AHCI_HFLAG_NO_MSI		= BIT(5), /* no PCI MSI */
> +	AHCI_HFLAG_NO_PMP		= BIT(6), /* no PMP */
> +	AHCI_HFLAG_SECT255		= BIT(8), /* max 255 sectors */
> +	AHCI_HFLAG_YES_NCQ		= BIT(9), /* force NCQ cap on */
> +	AHCI_HFLAG_NO_SUSPEND		= BIT(10), /* don't suspend */
> +	AHCI_HFLAG_SRST_TOUT_IS_OFFLINE	= BIT(11), /* treat SRST timeout as
> +						      link offline */
> +	AHCI_HFLAG_NO_SNTF		= BIT(12), /* no sntf */
> +	AHCI_HFLAG_NO_FPDMA_AA		= BIT(13), /* no FPDMA AA */
> +	AHCI_HFLAG_YES_FBS		= BIT(14), /* force FBS cap on */
> +	AHCI_HFLAG_DELAY_ENGINE		= BIT(15), /* do not start engine on
> +						      port start (wait until
> +						      error-handling stage) */
> +	AHCI_HFLAG_NO_DEVSLP		= BIT(17), /* no device sleep */
> +	AHCI_HFLAG_NO_FBS		= BIT(18), /* no FBS */
>  
>  #ifdef CONFIG_PCI_MSI
> -	AHCI_HFLAG_MULTI_MSI		= (1 << 20), /* per-port MSI(-X) */
> +	AHCI_HFLAG_MULTI_MSI		= BIT(20), /* per-port MSI(-X) */
>  #else
>  	/* compile out MSI infrastructure */
>  	AHCI_HFLAG_MULTI_MSI		= 0,
>  #endif
> -	AHCI_HFLAG_WAKE_BEFORE_STOP	= (1 << 22), /* wake before DMA stop */
> -	AHCI_HFLAG_YES_ALPM		= (1 << 23), /* force ALPM cap on */
> -	AHCI_HFLAG_NO_WRITE_TO_RO	= (1 << 24), /* don't write to read
> -							only registers */
> -	AHCI_HFLAG_USE_LPM_POLICY	= (1 << 25), /* chipset that should use
> -							SATA_MOBILE_LPM_POLICY
> -							as default lpm_policy */
> -	AHCI_HFLAG_SUSPEND_PHYS		= (1 << 26), /* handle PHYs during
> -							suspend/resume */
> -	AHCI_HFLAG_NO_SXS		= (1 << 28), /* SXS not supported */
> +	AHCI_HFLAG_WAKE_BEFORE_STOP	= BIT(22), /* wake before DMA stop */
> +	AHCI_HFLAG_YES_ALPM		= BIT(23), /* force ALPM cap on */
> +	AHCI_HFLAG_NO_WRITE_TO_RO	= BIT(24), /* don't write to read
> +						      only registers */
> +	AHCI_HFLAG_USE_LPM_POLICY	= BIT(25), /* chipset that should use
> +						      SATA_MOBILE_LPM_POLICY
> +						      as default lpm_policy */
> +	AHCI_HFLAG_SUSPEND_PHYS		= BIT(26), /* handle PHYs during
> +						      suspend/resume */
> +	AHCI_HFLAG_NO_SXS		= BIT(28), /* SXS not supported */
>  
>  	/* ap->flags bits */
>  
> @@ -261,22 +262,22 @@ enum {
>  	EM_MAX_RETRY			= 5,
>  
>  	/* em_ctl bits */
> -	EM_CTL_RST		= (1 << 9), /* Reset */
> -	EM_CTL_TM		= (1 << 8), /* Transmit Message */
> -	EM_CTL_MR		= (1 << 0), /* Message Received */
> -	EM_CTL_ALHD		= (1 << 26), /* Activity LED */
> -	EM_CTL_XMT		= (1 << 25), /* Transmit Only */
> -	EM_CTL_SMB		= (1 << 24), /* Single Message Buffer */
> -	EM_CTL_SGPIO		= (1 << 19), /* SGPIO messages supported */
> -	EM_CTL_SES		= (1 << 18), /* SES-2 messages supported */
> -	EM_CTL_SAFTE		= (1 << 17), /* SAF-TE messages supported */
> -	EM_CTL_LED		= (1 << 16), /* LED messages supported */
> +	EM_CTL_RST		= BIT(9), /* Reset */
> +	EM_CTL_TM		= BIT(8), /* Transmit Message */
> +	EM_CTL_MR		= BIT(0), /* Message Received */
> +	EM_CTL_ALHD		= BIT(26), /* Activity LED */
> +	EM_CTL_XMT		= BIT(25), /* Transmit Only */
> +	EM_CTL_SMB		= BIT(24), /* Single Message Buffer */
> +	EM_CTL_SGPIO		= BIT(19), /* SGPIO messages supported */
> +	EM_CTL_SES		= BIT(18), /* SES-2 messages supported */
> +	EM_CTL_SAFTE		= BIT(17), /* SAF-TE messages supported */
> +	EM_CTL_LED		= BIT(16), /* LED messages supported */
>  
>  	/* em message type */
> -	EM_MSG_TYPE_LED		= (1 << 0), /* LED */
> -	EM_MSG_TYPE_SAFTE	= (1 << 1), /* SAF-TE */
> -	EM_MSG_TYPE_SES2	= (1 << 2), /* SES-2 */
> -	EM_MSG_TYPE_SGPIO	= (1 << 3), /* SGPIO */
> +	EM_MSG_TYPE_LED		= BIT(0), /* LED */
> +	EM_MSG_TYPE_SAFTE	= BIT(1), /* SAF-TE */
> +	EM_MSG_TYPE_SES2	= BIT(2), /* SES-2 */
> +	EM_MSG_TYPE_SGPIO	= BIT(3), /* SGPIO */
>  };
>  
>  struct ahci_cmd_hdr {

-- 
Damien Le Moal
Western Digital Research

Powered by blists - more mailing lists