linux-kernel - Re: [regression] Bug 216753 - 6e 6 ghz bands are disabled since 5.16 on intel ax211

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAMfi-DQXkhG6DSWECpxZ+vH_Qi5boDMx5jNj7v7puLEEXRjUaw@mail.gmail.com>
Date:   Mon, 5 Dec 2022 10:35:02 -0600
From:   Dave Chiluk <chiluk@...ntu.com>
To:     Marcel Holtmann <marcel@...tmann.org>
Cc:     Thorsten Leemhuis <regressions@...mhuis.info>,
        "Coelho, Luciano" <luciano.coelho@...el.com>,
        "Greenman, Gregory" <gregory.greenman@...el.com>,
        "linux-wireless@...r.kernel.org" <linux-wireless@...r.kernel.org>,
        Johannes Berg <johannes@...solutions.net>,
        "regressions@...ts.linux.dev" <regressions@...ts.linux.dev>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [regression] Bug 216753 - 6e 6 ghz bands are disabled since 5.16
 on intel ax211

On Fri, Dec 2, 2022 at 11:46 AM Marcel Holtmann <marcel@...tmann.org> wrote:
>
> Hi Dave,
>
> can you run iwd and set Country=DE (or US) in its main.conf. I think
> most distros have a 2.0 package of iwd available. With iwd we have
> implemented all the handling and re-scanning to make sure we actually
> get to use 6Ghz is available.
>
> Btw. you can run iwd from its source tree. No need to install it if
> You don’t want to mess up your system. Just make sure to disable
> wpa_supplicant so it doesn’t interfere.

@Marcel, I was able to build iwd from source, but was unable to get it
to run due to dbus namespace conflicts. I don't know enough about dbus
to debug that further.  Running iwd from the archives (v1.26-3), and
setting COUNTRY=US in main.conf did not enable the 6e bands.

I don't think setting the global region is the issue, as iw reg set US
works fine, and results in the following iw reg get.  Even before
$iw reg set US
phy#0 sets itself to the correct region.  I think the issue is that
the bios, or the firmware blob being loaded by the ax211 that has some
bits improperly set that is causing the 6ghz to be disabled by the
kernel before userspace ever gets involved.

_________________snip_________________
$ sudo iw reg get
global
country US: DFS-FCC
(902 - 904 @ 2), (N/A, 30), (N/A)
(904 - 920 @ 16), (N/A, 30), (N/A)
(920 - 928 @ 8), (N/A, 30), (N/A)
(2400 - 2472 @ 40), (N/A, 30), (N/A)
(5150 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW
(5250 - 5350 @ 80), (N/A, 24), (0 ms), DFS, AUTO-BW
(5470 - 5730 @ 160), (N/A, 24), (0 ms), DFS
(5730 - 5850 @ 80), (N/A, 30), (N/A), AUTO-BW
(5850 - 5895 @ 40), (N/A, 27), (N/A), NO-OUTDOOR, AUTO-BW, PASSIVE-SCAN
(5925 - 7125 @ 320), (N/A, 12), (N/A), NO-OUTDOOR, PASSIVE-SCAN
(57240 - 71000 @ 2160), (N/A, 40), (N/A)

phy#0 (self-managed)
country US: DFS-UNSET
(2402 - 2437 @ 40), (6, 22), (N/A), AUTO-BW, NO-HT40MINUS, NO-80MHZ, NO-160MHZ
(2422 - 2462 @ 40), (6, 22), (N/A), AUTO-BW, NO-80MHZ, NO-160MHZ
(2447 - 2482 @ 40), (6, 22), (N/A), AUTO-BW, NO-HT40PLUS, NO-80MHZ, NO-160MHZ
(5170 - 5190 @ 160), (6, 22), (N/A), AUTO-BW, NO-HT40MINUS
(5190 - 5210 @ 160), (6, 22), (N/A), AUTO-BW, NO-HT40PLUS
(5210 - 5230 @ 160), (6, 22), (N/A), AUTO-BW, NO-HT40MINUS
(5230 - 5250 @ 160), (6, 22), (N/A), AUTO-BW, NO-HT40PLUS
(5250 - 5270 @ 160), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40MINUS, PASSIVE-SCAN
(5270 - 5290 @ 160), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40PLUS, PASSIVE-SCAN
(5290 - 5310 @ 160), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40MINUS, PASSIVE-SCAN
(5310 - 5330 @ 160), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40PLUS, PASSIVE-SCAN
(5490 - 5510 @ 240), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40MINUS, PASSIVE-SCAN
(5510 - 5530 @ 240), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40PLUS, PASSIVE-SCAN
(5530 - 5550 @ 240), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40MINUS, PASSIVE-SCAN
(5550 - 5570 @ 240), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40PLUS, PASSIVE-SCAN
(5570 - 5590 @ 240), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40MINUS, PASSIVE-SCAN
(5590 - 5610 @ 240), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40PLUS, PASSIVE-SCAN
(5610 - 5630 @ 240), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40MINUS, PASSIVE-SCAN
(5630 - 5650 @ 240), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40PLUS, PASSIVE-SCAN
(5650 - 5670 @ 80), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40MINUS,
NO-160MHZ, PASSIVE-SCAN
(5670 - 5690 @ 80), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40PLUS,
NO-160MHZ, PASSIVE-SCAN
(5690 - 5710 @ 80), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40MINUS,
NO-160MHZ, PASSIVE-SCAN
(5710 - 5730 @ 80), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40PLUS,
NO-160MHZ, PASSIVE-SCAN
(5735 - 5755 @ 80), (6, 22), (N/A), AUTO-BW, NO-HT40MINUS, NO-160MHZ
(5755 - 5775 @ 80), (6, 22), (N/A), AUTO-BW, NO-HT40PLUS, NO-160MHZ
(5775 - 5795 @ 80), (6, 22), (N/A), AUTO-BW, NO-HT40MINUS, NO-160MHZ
(5795 - 5815 @ 80), (6, 22), (N/A), AUTO-BW, NO-HT40PLUS, NO-160MHZ
(5815 - 5835 @ 40), (6, 22), (N/A), AUTO-BW, NO-HT40MINUS, NO-80MHZ, NO-160MHZ
_________________snip_________________

I wanted to call out the DFS-UNSET setting on phy#0

Dave.