Message-ID: <d53ffecdde8d3950a24155228a3439f2c9b10b9b.1670259123.git.piergiorgio.beruto@gmail.com>
Date:   Mon, 5 Dec 2022 18:17:37 +0100
From:   Piergiorgio Beruto <piergiorgio.beruto@...il.com>
To:     Andrew Lunn <andrew@...n.ch>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Russell King <linux@...linux.org.uk>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>
Cc:     linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
        Oleksij Rempel <o.rempel@...gutronix.de>
Subject: [PATCH v3 net-next 1/4] net/ethtool: add netlink interface for the
 PLCA RS

Add support for configuring the PLCA Reconciliation Sublayer on
multi-drop PHYs that support IEEE802.3cg-2019 Clause 148 (e.g.,
10BASE-T1S). This patch adds the appropriate netlink interface
to ethtool.

Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@...il.com>
---
 MAINTAINERS                          |   6 +
 drivers/net/phy/phy.c                |  34 ++++
 drivers/net/phy/phy_device.c         |   3 +
 include/linux/ethtool.h              |  11 +
 include/linux/phy.h                  |  64 ++++++
 include/uapi/linux/ethtool_netlink.h |  25 +++
 net/ethtool/Makefile                 |   2 +-
 net/ethtool/netlink.c                |  30 +++
 net/ethtool/netlink.h                |   6 +
 net/ethtool/plca.c                   | 290 +++++++++++++++++++++++++++
 10 files changed, 470 insertions(+), 1 deletion(-)
 create mode 100644 net/ethtool/plca.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 955c1be1efb2..7952243e4b43 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16396,6 +16396,12 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
 F:	drivers/iio/chemical/pms7003.c
 
+PLCA RECONCILIATION SUBLAYER (IEEE802.3 Clause 148)
+M:	Piergiorgio Beruto <piergiorgio.beruto@...il.com>
+L:	netdev@...r.kernel.org
+S:	Maintained
+F:	net/ethtool/plca.c
+
 PLDMFW LIBRARY
 M:	Jacob Keller <jacob.e.keller@...el.com>
 S:	Maintained
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index e5b6cb1a77f9..99e3497b6aa1 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -543,6 +543,40 @@ int phy_ethtool_get_stats(struct phy_device *phydev,
 }
 EXPORT_SYMBOL(phy_ethtool_get_stats);
 
+/**
+ *
+ */
+int phy_ethtool_get_plca_cfg(struct phy_device *dev,
+			     struct phy_plca_cfg *plca_cfg)
+{
+	// TODO
+	return 0;
+}
+EXPORT_SYMBOL(phy_ethtool_get_plca_cfg);
+
+/**
+ *
+ */
+int phy_ethtool_set_plca_cfg(struct phy_device *dev,
+			     struct netlink_ext_ack *extack,
+			     const struct phy_plca_cfg *plca_cfg)
+{
+	// TODO
+	return 0;
+}
+EXPORT_SYMBOL(phy_ethtool_set_plca_cfg);
+
+/**
+ *
+ */
+int phy_ethtool_get_plca_status(struct phy_device *dev,
+				struct phy_plca_status *plca_st)
+{
+	// TODO
+	return 0;
+}
+EXPORT_SYMBOL(phy_ethtool_get_plca_status);
+
 /**
  * phy_start_cable_test - Start a cable test
  *
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 716870a4499c..f248010c403d 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -3262,6 +3262,9 @@ static const struct ethtool_phy_ops phy_ethtool_phy_ops = {
 	.get_sset_count		= phy_ethtool_get_sset_count,
 	.get_strings		= phy_ethtool_get_strings,
 	.get_stats		= phy_ethtool_get_stats,
+	.get_plca_cfg		= phy_ethtool_get_plca_cfg,
+	.set_plca_cfg		= phy_ethtool_set_plca_cfg,
+	.get_plca_status	= phy_ethtool_get_plca_status,
 	.start_cable_test	= phy_start_cable_test,
 	.start_cable_test_tdr	= phy_start_cable_test_tdr,
 };
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index 9e0a76fc7de9..4bfe95ec1f0a 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -802,12 +802,16 @@ int ethtool_virtdev_set_link_ksettings(struct net_device *dev,
 
 struct phy_device;
 struct phy_tdr_config;
+struct phy_plca_cfg;
+struct phy_plca_status;
 
 /**
  * struct ethtool_phy_ops - Optional PHY device options
  * @get_sset_count: Get number of strings that @get_strings will write.
  * @get_strings: Return a set of strings that describe the requested objects
  * @get_stats: Return extended statistics about the PHY device.
+ * @get_plca_cfg: Return PLCA configuration.
+ * @set_plca_cfg: Set PLCA configuration.
  * @start_cable_test: Start a cable test
  * @start_cable_test_tdr: Start a Time Domain Reflectometry cable test
  *
@@ -819,6 +823,13 @@ struct ethtool_phy_ops {
 	int (*get_strings)(struct phy_device *dev, u8 *data);
 	int (*get_stats)(struct phy_device *dev,
 			 struct ethtool_stats *stats, u64 *data);
+	int (*get_plca_cfg)(struct phy_device *dev,
+			    struct phy_plca_cfg *plca_cfg);
+	int (*set_plca_cfg)(struct phy_device *dev,
+			    struct netlink_ext_ack *extack,
+			    const struct phy_plca_cfg *plca_cfg);
+	int (*get_plca_status)(struct phy_device *dev,
+			       struct phy_plca_status *plca_st);
 	int (*start_cable_test)(struct phy_device *phydev,
 				struct netlink_ext_ack *extack);
 	int (*start_cable_test_tdr)(struct phy_device *phydev,
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 71eeb4e3b1fd..ab2c134d0a05 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -765,6 +765,63 @@ struct phy_tdr_config {
 };
 #define PHY_PAIR_ALL -1
 
+/**
+ * struct phy_plca_cfg - Configuration of the PLCA (Physical Layer Collision
+ * Avoidance) Reconciliation Sublayer.
+ *
+ * @version: read-only PLCA register map version. 0 = not available. Ignored
+ *   when setting the configuration. Format is the same as reported by the PLCA
+ *   IDVER register (31.CA00). -1 = not available.
+ * @enabled: PLCA configured mode (enabled/disabled). -1 = not available / don't
+ *   set. 0 = disabled, anything else = enabled.
+ * @node_id: the PLCA local node identifier. -1 = not available / don't set.
+ *   Allowed values [0 .. 254]. 255 = node disabled.
+ * @node_cnt: the PLCA node count (maximum number of nodes having a TO). Only
+ *   meaningful for the coordinator (node_id = 0). -1 = not available / don't
+ *   set. Allowed values [0 .. 255].
+ * @to_tmr: The value of the PLCA to_timer in bit-times, which determines the
+ *   PLCA transmit opportunity window opening. See IEEE802.3 Clause 148 for
+ *   more details. The to_timer shall be set equal over all nodes.
+ *   -1 = not available / don't set. Allowed values [0 .. 255].
+ * @burst_cnt: controls how many additional frames a node is allowed to send in
+ *   single transmit opportunity (TO). The default value of 0 means that the
+ *   node is allowed exactly one frame per TO. A value of 1 allows two frames
+ *   per TO, and so on. -1 = not available / don't set.
+ *   Allowed values [0 .. 255].
+ * @burst_tmr: controls how many bit times to wait for the MAC to send a new
+ *   frame before interrupting the burst. This value should be set to a value
+ *   greater than the MAC inter-packet gap (which is typically 96 bits).
+ *   -1 = not available / don't set. Allowed values [0 .. 255].
+ *
+ * A structure containing configuration parameters for setting/getting the PLCA
+ * RS configuration. The driver does not need to implement all the parameters,
+ * but should report what is actually used.
+ */
+struct phy_plca_cfg {
+	s32 version;
+	s16 enabled;
+	s16 node_id;
+	s16 node_cnt;
+	s16 to_tmr;
+	s16 burst_cnt;
+	s16 burst_tmr;
+};
+
+/**
+ * struct phy_plca_status - Status of the PLCA (Physical Layer Collision
+ * Avoidance) Reconciliation Sublayer.
+ *
+ * @pst: The PLCA status as reported by the PST bit in the PLCA STATUS
+ *	register(31.CA03), indicating BEACON activity.
+ *
+ * A structure containing status information of the PLCA RS configuration.
+ * The driver does not need to implement all the parameters, but should report
+ * what is actually used.
+ */
+struct phy_plca_status {
+	bool pst;
+};
+
 /**
  * struct phy_driver - Driver structure for a particular PHY type
  *
@@ -1775,6 +1832,13 @@ int phy_ethtool_get_strings(struct phy_device *phydev, u8 *data);
 int phy_ethtool_get_sset_count(struct phy_device *phydev);
 int phy_ethtool_get_stats(struct phy_device *phydev,
 			  struct ethtool_stats *stats, u64 *data);
+int phy_ethtool_get_plca_cfg(struct phy_device *dev,
+			     struct phy_plca_cfg *plca_cfg);
+int phy_ethtool_set_plca_cfg(struct phy_device *dev,
+			     struct netlink_ext_ack *extack,
+			     const struct phy_plca_cfg *plca_cfg);
+int phy_ethtool_get_plca_status(struct phy_device *dev,
+				struct phy_plca_status *plca_st);
 
 static inline int phy_package_read(struct phy_device *phydev, u32 regnum)
 {
diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h
index aaf7c6963d61..81e3d7b42d0f 100644
--- a/include/uapi/linux/ethtool_netlink.h
+++ b/include/uapi/linux/ethtool_netlink.h
@@ -51,6 +51,9 @@ enum {
 	ETHTOOL_MSG_MODULE_SET,
 	ETHTOOL_MSG_PSE_GET,
 	ETHTOOL_MSG_PSE_SET,
+	ETHTOOL_MSG_PLCA_GET_CFG,
+	ETHTOOL_MSG_PLCA_SET_CFG,
+	ETHTOOL_MSG_PLCA_GET_STATUS,
 
 	/* add new constants above here */
 	__ETHTOOL_MSG_USER_CNT,
@@ -97,6 +100,9 @@ enum {
 	ETHTOOL_MSG_MODULE_GET_REPLY,
 	ETHTOOL_MSG_MODULE_NTF,
 	ETHTOOL_MSG_PSE_GET_REPLY,
+	ETHTOOL_MSG_PLCA_GET_CFG_REPLY,
+	ETHTOOL_MSG_PLCA_GET_STATUS_REPLY,
+	ETHTOOL_MSG_PLCA_NTF,
 
 	/* add new constants above here */
 	__ETHTOOL_MSG_KERNEL_CNT,
@@ -880,6 +886,25 @@ enum {
 	ETHTOOL_A_PSE_MAX = (__ETHTOOL_A_PSE_CNT - 1)
 };
 
+/* PLCA */
+
+enum {
+	ETHTOOL_A_PLCA_UNSPEC,
+	ETHTOOL_A_PLCA_HEADER,				/* nest - _A_HEADER_* */
+	ETHTOOL_A_PLCA_VERSION,				/* u16 */
+	ETHTOOL_A_PLCA_ENABLED,				/* u8 */
+	ETHTOOL_A_PLCA_STATUS,				/* u8 */
+	ETHTOOL_A_PLCA_NODE_CNT,			/* u8 */
+	ETHTOOL_A_PLCA_NODE_ID,				/* u8 */
+	ETHTOOL_A_PLCA_TO_TMR,				/* u8 */
+	ETHTOOL_A_PLCA_BURST_CNT,			/* u8 */
+	ETHTOOL_A_PLCA_BURST_TMR,			/* u8 */
+
+	/* add new constants above here */
+	__ETHTOOL_A_PLCA_CNT,
+	ETHTOOL_A_PLCA_MAX = (__ETHTOOL_A_PLCA_CNT - 1)
+};
+
 /* generic netlink info */
 #define ETHTOOL_GENL_NAME "ethtool"
 #define ETHTOOL_GENL_VERSION 1
diff --git a/net/ethtool/Makefile b/net/ethtool/Makefile
index 72ab0944262a..b18930e2ce9a 100644
--- a/net/ethtool/Makefile
+++ b/net/ethtool/Makefile
@@ -8,4 +8,4 @@ ethtool_nl-y	:= netlink.o bitset.o strset.o linkinfo.o linkmodes.o \
 		   linkstate.o debug.o wol.o features.o privflags.o rings.o \
 		   channels.o coalesce.o pause.o eee.o tsinfo.o cabletest.o \
 		   tunnels.o fec.o eeprom.o stats.o phc_vclocks.o module.o \
-		   pse-pd.o
+		   pse-pd.o plca.o
diff --git a/net/ethtool/netlink.c b/net/ethtool/netlink.c
index 1a4c11356c96..eb044f48cb24 100644
--- a/net/ethtool/netlink.c
+++ b/net/ethtool/netlink.c
@@ -287,6 +287,8 @@ ethnl_default_requests[__ETHTOOL_MSG_USER_CNT] = {
 	[ETHTOOL_MSG_PHC_VCLOCKS_GET]	= &ethnl_phc_vclocks_request_ops,
 	[ETHTOOL_MSG_MODULE_GET]	= &ethnl_module_request_ops,
 	[ETHTOOL_MSG_PSE_GET]		= &ethnl_pse_request_ops,
+	[ETHTOOL_MSG_PLCA_GET_CFG]	= &ethnl_plca_cfg_request_ops,
+	[ETHTOOL_MSG_PLCA_GET_STATUS]	= &ethnl_plca_status_request_ops,
 };
 
 static struct ethnl_dump_ctx *ethnl_dump_context(struct netlink_callback *cb)
@@ -602,6 +604,7 @@ ethnl_default_notify_ops[ETHTOOL_MSG_KERNEL_MAX + 1] = {
 	[ETHTOOL_MSG_EEE_NTF]		= &ethnl_eee_request_ops,
 	[ETHTOOL_MSG_FEC_NTF]		= &ethnl_fec_request_ops,
 	[ETHTOOL_MSG_MODULE_NTF]	= &ethnl_module_request_ops,
+	[ETHTOOL_MSG_PLCA_NTF]		= &ethnl_plca_cfg_request_ops,
 };
 
 /* default notification handler */
@@ -695,6 +698,7 @@ static const ethnl_notify_handler_t ethnl_notify_handlers[] = {
 	[ETHTOOL_MSG_EEE_NTF]		= ethnl_default_notify,
 	[ETHTOOL_MSG_FEC_NTF]		= ethnl_default_notify,
 	[ETHTOOL_MSG_MODULE_NTF]	= ethnl_default_notify,
+	[ETHTOOL_MSG_PLCA_NTF]		= ethnl_default_notify,
 };
 
 void ethtool_notify(struct net_device *dev, unsigned int cmd, const void *data)
@@ -1040,6 +1044,32 @@ static const struct genl_ops ethtool_genl_ops[] = {
 		.policy = ethnl_pse_set_policy,
 		.maxattr = ARRAY_SIZE(ethnl_pse_set_policy) - 1,
 	},
+	{
+		.cmd	= ETHTOOL_MSG_PLCA_GET_CFG,
+		.doit	= ethnl_default_doit,
+		.start	= ethnl_default_start,
+		.dumpit	= ethnl_default_dumpit,
+		.done	= ethnl_default_done,
+		.policy = ethnl_plca_get_cfg_policy,
+		.maxattr = ARRAY_SIZE(ethnl_plca_get_cfg_policy) - 1,
+	},
+	{
+		.cmd	= ETHTOOL_MSG_PLCA_SET_CFG,
+		.flags	= GENL_UNS_ADMIN_PERM,
+		.doit	= ethnl_set_plca_cfg,
+		.policy = ethnl_plca_set_cfg_policy,
+		.maxattr = ARRAY_SIZE(ethnl_plca_set_cfg_policy) - 1,
+	},
+	{
+		.cmd	= ETHTOOL_MSG_PLCA_GET_STATUS,
+		.doit	= ethnl_default_doit,
+		.start	= ethnl_default_start,
+		.dumpit	= ethnl_default_dumpit,
+		.done	= ethnl_default_done,
+		.policy = ethnl_plca_get_status_policy,
+		.maxattr = ARRAY_SIZE(ethnl_plca_get_status_policy) - 1,
+	},
+
 };
 
 static const struct genl_multicast_group ethtool_nl_mcgrps[] = {
diff --git a/net/ethtool/netlink.h b/net/ethtool/netlink.h
index 1bfd374f9718..c0ed1a6d0833 100644
--- a/net/ethtool/netlink.h
+++ b/net/ethtool/netlink.h
@@ -346,6 +346,8 @@ extern const struct ethnl_request_ops ethnl_stats_request_ops;
 extern const struct ethnl_request_ops ethnl_phc_vclocks_request_ops;
 extern const struct ethnl_request_ops ethnl_module_request_ops;
 extern const struct ethnl_request_ops ethnl_pse_request_ops;
+extern const struct ethnl_request_ops ethnl_plca_cfg_request_ops;
+extern const struct ethnl_request_ops ethnl_plca_status_request_ops;
 
 extern const struct nla_policy ethnl_header_policy[ETHTOOL_A_HEADER_FLAGS + 1];
 extern const struct nla_policy ethnl_header_policy_stats[ETHTOOL_A_HEADER_FLAGS + 1];
@@ -386,6 +388,9 @@ extern const struct nla_policy ethnl_module_get_policy[ETHTOOL_A_MODULE_HEADER +
 extern const struct nla_policy ethnl_module_set_policy[ETHTOOL_A_MODULE_POWER_MODE_POLICY + 1];
 extern const struct nla_policy ethnl_pse_get_policy[ETHTOOL_A_PSE_HEADER + 1];
 extern const struct nla_policy ethnl_pse_set_policy[ETHTOOL_A_PSE_MAX + 1];
+extern const struct nla_policy ethnl_plca_get_cfg_policy[ETHTOOL_A_PLCA_HEADER + 1];
+extern const struct nla_policy ethnl_plca_set_cfg_policy[ETHTOOL_A_PLCA_MAX + 1];
+extern const struct nla_policy ethnl_plca_get_status_policy[ETHTOOL_A_PLCA_HEADER + 1];
 
 int ethnl_set_linkinfo(struct sk_buff *skb, struct genl_info *info);
 int ethnl_set_linkmodes(struct sk_buff *skb, struct genl_info *info);
@@ -406,6 +411,7 @@ int ethnl_tunnel_info_dumpit(struct sk_buff *skb, struct netlink_callback *cb);
 int ethnl_set_fec(struct sk_buff *skb, struct genl_info *info);
 int ethnl_set_module(struct sk_buff *skb, struct genl_info *info);
 int ethnl_set_pse(struct sk_buff *skb, struct genl_info *info);
+int ethnl_set_plca_cfg(struct sk_buff *skb, struct genl_info *info);
 
 extern const char stats_std_names[__ETHTOOL_STATS_CNT][ETH_GSTRING_LEN];
 extern const char stats_eth_phy_names[__ETHTOOL_A_STATS_ETH_PHY_CNT][ETH_GSTRING_LEN];
diff --git a/net/ethtool/plca.c b/net/ethtool/plca.c
new file mode 100644
index 000000000000..0282acab1c4d
--- /dev/null
+++ b/net/ethtool/plca.c
@@ -0,0 +1,290 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/phy.h>
+#include <linux/ethtool_netlink.h>
+
+#include "netlink.h"
+#include "common.h"
+
+struct plca_req_info {
+	struct ethnl_req_info		base;
+};
+
+struct plca_reply_data {
+	struct ethnl_reply_data		base;
+	struct phy_plca_cfg		plca_cfg;
+	struct phy_plca_status		plca_st;
+};
+
+#define PLCA_REPDATA(__reply_base) \
+	container_of(__reply_base, struct plca_reply_data, base)
+
+// PLCA get configuration message ------------------------------------------- //
+
+const struct nla_policy ethnl_plca_get_cfg_policy[] = {
+	[ETHTOOL_A_PLCA_HEADER]		=
+		NLA_POLICY_NESTED(ethnl_header_policy),
+};
+
+static int plca_get_cfg_prepare_data(const struct ethnl_req_info *req_base,
+				     struct ethnl_reply_data *reply_base,
+				     struct genl_info *info)
+{
+	struct plca_reply_data *data = PLCA_REPDATA(reply_base);
+	struct net_device *dev = reply_base->dev;
+	const struct ethtool_phy_ops *ops;
+	int ret;
+
+	// check that the PHY device is available and connected
+	if (!dev->phydev) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	// note: rtnl_lock is held already by ethnl_default_doit
+	ops = ethtool_phy_ops;
+	if (!ops || !ops->get_plca_cfg) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	ret = ethnl_ops_begin(dev);
+	if (ret < 0)
+		goto out;
+
+	ret = ops->get_plca_cfg(dev->phydev, &data->plca_cfg);
+	if (ret < 0)
+		goto out;
+
+	ethnl_ops_complete(dev);
+
+out:
+	return ret;
+}
+
+static int plca_get_cfg_reply_size(const struct ethnl_req_info *req_base,
+				   const struct ethnl_reply_data *reply_base)
+{
+	return nla_total_size(sizeof(u16)) +	/* _VERSION */
+	       nla_total_size(sizeof(u8)) +	/* _ENABLED */
+	       nla_total_size(sizeof(u8)) +	/* _STATUS  */
+	       nla_total_size(sizeof(u8)) +	/* _NODE_CNT */
+	       nla_total_size(sizeof(u8)) +	/* _NODE_ID */
+	       nla_total_size(sizeof(u8)) +	/* _TO_TIMER */
+	       nla_total_size(sizeof(u8)) +	/* _BURST_COUNT */
+	       nla_total_size(sizeof(u8));	/* _BURST_TIMER */
+}
+
+static int plca_get_cfg_fill_reply(struct sk_buff *skb,
+				   const struct ethnl_req_info *req_base,
+				   const struct ethnl_reply_data *reply_base)
+{
+	const struct plca_reply_data *data = PLCA_REPDATA(reply_base);
+	const struct phy_plca_cfg *plca = &data->plca_cfg;
+
+	if ((plca->version >= 0 &&
+	     nla_put_u16(skb, ETHTOOL_A_PLCA_VERSION, (u16)plca->version)) ||
+	    (plca->enabled >= 0 &&
+	     nla_put_u8(skb, ETHTOOL_A_PLCA_ENABLED, !!plca->enabled)) ||
+	    (plca->node_id >= 0 &&
+	     nla_put_u8(skb, ETHTOOL_A_PLCA_NODE_ID, (u8)plca->node_id)) ||
+	    (plca->node_cnt >= 0 &&
+	     nla_put_u8(skb, ETHTOOL_A_PLCA_NODE_CNT, (u8)plca->node_cnt)) ||
+	    (plca->to_tmr >= 0 &&
+	     nla_put_u8(skb, ETHTOOL_A_PLCA_TO_TMR, (u8)plca->to_tmr)) ||
+	    (plca->burst_cnt >= 0 &&
+	     nla_put_u8(skb, ETHTOOL_A_PLCA_BURST_CNT, (u8)plca->burst_cnt)) ||
+	    (plca->burst_tmr >= 0 &&
+	     nla_put_u8(skb, ETHTOOL_A_PLCA_BURST_TMR, (u8)plca->burst_tmr)))
+		return -EMSGSIZE;
+
+	return 0;
+};
+
+const struct ethnl_request_ops ethnl_plca_cfg_request_ops = {
+	.request_cmd		= ETHTOOL_MSG_PLCA_GET_CFG,
+	.reply_cmd		= ETHTOOL_MSG_PLCA_GET_CFG_REPLY,
+	.hdr_attr		= ETHTOOL_A_PLCA_HEADER,
+	.req_info_size		= sizeof(struct plca_req_info),
+	.reply_data_size	= sizeof(struct plca_reply_data),
+
+	.prepare_data		= plca_get_cfg_prepare_data,
+	.reply_size		= plca_get_cfg_reply_size,
+	.fill_reply		= plca_get_cfg_fill_reply,
+};
+
+// PLCA set configuration message ------------------------------------------- //
+
+const struct nla_policy ethnl_plca_set_cfg_policy[] = {
+	[ETHTOOL_A_PLCA_HEADER]		=
+		NLA_POLICY_NESTED(ethnl_header_policy),
+	[ETHTOOL_A_PLCA_ENABLED]	= { .type = NLA_U8 },
+	[ETHTOOL_A_PLCA_NODE_ID]	= { .type = NLA_U8 },
+	[ETHTOOL_A_PLCA_NODE_CNT]	= { .type = NLA_U8 },
+	[ETHTOOL_A_PLCA_TO_TMR]		= { .type = NLA_U8 },
+	[ETHTOOL_A_PLCA_BURST_CNT]	= { .type = NLA_U8 },
+	[ETHTOOL_A_PLCA_BURST_TMR]	= { .type = NLA_U8 },
+};
+
+int ethnl_set_plca_cfg(struct sk_buff *skb, struct genl_info *info)
+{
+	struct ethnl_req_info req_info = {};
+	struct nlattr **tb = info->attrs;
+	const struct ethtool_phy_ops *ops;
+	struct phy_plca_cfg plca_cfg;
+	struct net_device *dev;
+
+	bool mod = false;
+	int ret;
+
+	ret = ethnl_parse_header_dev_get(&req_info,
+					 tb[ETHTOOL_A_PLCA_HEADER],
+					 genl_info_net(info), info->extack,
+					 true);
+	if (ret < 0)
+		return ret;
+
+	dev = req_info.dev;
+
+	// check that the PHY device is available and connected
+	rtnl_lock();
+
+	if (!dev->phydev) {
+		ret = -EOPNOTSUPP;
+		goto out_rtnl;
+	}
+
+	ops = ethtool_phy_ops;
+	if (!ops || !ops->set_plca_cfg) {
+		ret = -EOPNOTSUPP;
+		goto out_rtnl;
+	}
+
+	ret = ethnl_ops_begin(dev);
+	if (ret < 0)
+		goto out_rtnl;
+
+	memset(&plca_cfg, 0xFF, sizeof(plca_cfg));
+
+	if (tb[ETHTOOL_A_PLCA_ENABLED]) {
+		plca_cfg.enabled = !!nla_get_u8(tb[ETHTOOL_A_PLCA_ENABLED]);
+		mod = true;
+	}
+
+	if (tb[ETHTOOL_A_PLCA_NODE_ID]) {
+		plca_cfg.node_id = nla_get_u8(tb[ETHTOOL_A_PLCA_NODE_ID]);
+		mod = true;
+	}
+
+	if (tb[ETHTOOL_A_PLCA_NODE_CNT]) {
+		plca_cfg.node_cnt = nla_get_u8(tb[ETHTOOL_A_PLCA_NODE_CNT]);
+		mod = true;
+	}
+
+	if (tb[ETHTOOL_A_PLCA_TO_TMR]) {
+		plca_cfg.to_tmr = nla_get_u8(tb[ETHTOOL_A_PLCA_TO_TMR]);
+		mod = true;
+	}
+
+	if (tb[ETHTOOL_A_PLCA_BURST_CNT]) {
+		plca_cfg.burst_cnt = nla_get_u8(tb[ETHTOOL_A_PLCA_BURST_CNT]);
+		mod = true;
+	}
+
+	if (tb[ETHTOOL_A_PLCA_BURST_TMR]) {
+		plca_cfg.burst_tmr = nla_get_u8(tb[ETHTOOL_A_PLCA_BURST_TMR]);
+		mod = true;
+	}
+
+	ret = 0;
+	if (!mod)
+		goto out_ops;
+
+	ret = ops->set_plca_cfg(dev->phydev, info->extack, &plca_cfg);
+
+	if (ret < 0)
+		goto out_ops;
+
+	ethtool_notify(dev, ETHTOOL_MSG_PLCA_NTF, NULL);
+
+out_ops:
+	ethnl_ops_complete(dev);
+out_rtnl:
+	rtnl_unlock();
+	ethnl_parse_header_dev_put(&req_info);
+
+	return ret;
+}
+
+// PLCA get status message -------------------------------------------------- //
+
+const struct nla_policy ethnl_plca_get_status_policy[] = {
+	[ETHTOOL_A_PLCA_HEADER]		=
+		NLA_POLICY_NESTED(ethnl_header_policy),
+};
+
+static int plca_get_status_prepare_data(const struct ethnl_req_info *req_base,
+					struct ethnl_reply_data *reply_base,
+					struct genl_info *info)
+{
+	struct plca_reply_data *data = PLCA_REPDATA(reply_base);
+	struct net_device *dev = reply_base->dev;
+	const struct ethtool_phy_ops *ops;
+	int ret;
+
+	// check that the PHY device is available and connected
+	if (!dev->phydev) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	// note: rtnl_lock is held already by ethnl_default_doit
+	ops = ethtool_phy_ops;
+	if (!ops || !ops->get_plca_status) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	ret = ethnl_ops_begin(dev);
+	if (ret < 0)
+		goto out;
+
+	ret = ops->get_plca_status(dev->phydev, &data->plca_st);
+	if (ret < 0)
+		goto out;
+
+	ethnl_ops_complete(dev);
+out:
+	return ret;
+}
+
+static int plca_get_status_reply_size(const struct ethnl_req_info *req_base,
+				      const struct ethnl_reply_data *reply_base)
+{
+	return nla_total_size(sizeof(u8));	/* _STATUS */
+}
+
+static int plca_get_status_fill_reply(struct sk_buff *skb,
+				      const struct ethnl_req_info *req_base,
+				      const struct ethnl_reply_data *reply_base)
+{
+	const struct plca_reply_data *data = PLCA_REPDATA(reply_base);
+	const u8 status = data->plca_st.pst;
+
+	if (nla_put_u8(skb, ETHTOOL_A_PLCA_STATUS, !!status))
+		return -EMSGSIZE;
+
+	return 0;
+};
+
+const struct ethnl_request_ops ethnl_plca_status_request_ops = {
+	.request_cmd		= ETHTOOL_MSG_PLCA_GET_STATUS,
+	.reply_cmd		= ETHTOOL_MSG_PLCA_GET_STATUS_REPLY,
+	.hdr_attr		= ETHTOOL_A_PLCA_HEADER,
+	.req_info_size		= sizeof(struct plca_req_info),
+	.reply_data_size	= sizeof(struct plca_reply_data),
+
+	.prepare_data		= plca_get_status_prepare_data,
+	.reply_size		= plca_get_status_reply_size,
+	.fill_reply		= plca_get_status_fill_reply,
+};
-- 
2.35.1

Powered by blists - more mailing lists