[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <cebb1182-ca05-b339-8990-e85fff43bcb7@linaro.org>
Date: Tue, 6 Dec 2022 12:44:54 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Abel Vesa <abel.vesa@...aro.org>, Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Neil Armstrong <neil.armstrong@...aro.org>
Cc: Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
devicetree@...r.kernel.org, linux-arm-msm@...r.kernel.org
Subject: Re: [PATCH v5 10/10] arm64: dts: qcom: Add base SM8550 MTP dts
On 06/12/2022 00:03, Abel Vesa wrote:
> Add dts file for Qualcomm MTP platform which uses SM8550 SoC.
>
> Co-developed-by: Neil Armstrong <neil.armstrong@...aro.org>
> Signed-off-by: Neil Armstrong <neil.armstrong@...aro.org>
> Signed-off-by: Abel Vesa <abel.vesa@...aro.org>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 404 ++++++++++++++++++++++++
> 2 files changed, 405 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sm8550-mtp.dts
>
Thank you for your patch. There is something to discuss/improve.
> +
> +&qupv3_id_0 {
> + status = "okay";
> +};
> +
> +&sdhc_2 {
> + cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
> + pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
> + vmmc-supply = <&vreg_l9b_2p9>;
> + vqmmc-supply = <&vreg_l8b_1p8>;
> + bus-width = <4>;
> + no-sdio;
> + no-emmc;
no-mmc
https://lore.kernel.org/linux-devicetree/20221204094438.73288-2-krzysztof.kozlowski@linaro.org/
Best regards,
Krzysztof
Powered by blists - more mailing lists