[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20221207-msm8953-6-1-next-dtbs-v3-v3-9-a64b3b0af0eb@z3ntu.xyz>
Date: Wed, 07 Dec 2022 19:30:46 +0100
From: Luca Weiss <luca@...tu.xyz>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Kees Cook <keescook@...omium.org>,
"Guilherme G. Piccoli" <gpiccoli@...lia.com>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Tony Luck <tony.luck@...el.com>
Cc: Gabriela David <ultracoolguy@...root.org>,
Eugene Lepshy <fekz115@...il.com>,
linux-hardening@...r.kernel.org,
Anton Bambura <jenneron@...tonmail.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Luca Weiss <luca@...tu.xyz>,
Adam Skladowski <a39.skl@...il.com>,
~postmarketos/upstreaming@...ts.sr.ht,
linux-arm-msm@...r.kernel.org, phone-devel@...r.kernel.org,
Danila Tikhonov <JIaxyga@...tonmail.com>,
Gianluca Boiano <morf3089@...il.com>,
Sireesh Kodali <sireeshkodali1@...il.com>,
Vladimir Lypak <vladimir.lypak@...il.com>,
Julian Braha <julianbraha@...il.com>,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
Alejandro Tafalla <atafalla@...on.com>
Subject: [PATCH v3 9/9] arm64: dts: qcom: sdm632: Add device tree for Motorola G7
Power
From: Gabriela David <ultracoolguy@...root.org>
Add device tree for the Motorola G7 Power (ocean) smartphone. This
device is based on Snapdragon 632 (sdm632) SoC which is a variant of
MSM8953.
Signed-off-by: Gabriela David <ultracoolguy@...root.org>
Signed-off-by: Luca Weiss <luca@...tu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts | 291 +++++++++++++++++++++
2 files changed, 292 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 995973d3960a..21fd4aae31bc 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -138,6 +138,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-discovery.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-pioneer.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-voyager.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm632-fairphone-fp3.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sdm632-motorola-ocean.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm636-sony-xperia-ganges-mermaid.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm660-xiaomi-lavender.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm670-google-sargo.dtb
diff --git a/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts b/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts
new file mode 100644
index 000000000000..c82d6e628d2c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts
@@ -0,0 +1,291 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Gabriela David
+ */
+/dts-v1/;
+
+#include "sdm632.dtsi"
+#include "pm8953.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/delete-node/ &cont_splash_mem;
+/delete-node/ &qseecom_mem;
+
+/ {
+ model = "Motorola G7 Power";
+ compatible = "motorola,ocean", "qcom,sdm632";
+ chassis-type = "handset";
+ qcom,msm-id = <349 0>;
+ qcom,board-id = <0x141 0xc100>;
+ qcom,pmic-id = <0x10016 0x25 0x00 0x00>;
+
+ backlight: backlight {
+ compatible = "led-backlight";
+ leds = <&led>;
+ };
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ framebuffer@...01000 {
+ compatible = "simple-framebuffer";
+ reg = <0 0x90001000 0 (720 * 1520 * 3)>;
+
+ width = <720>;
+ height = <1520>;
+ stride = <(720 * 3)>;
+ format = "r8g8b8";
+
+ power-domains = <&gcc MDSS_GDSC>;
+
+ clocks = <&gcc GCC_MDSS_AHB_CLK>,
+ <&gcc GCC_MDSS_AXI_CLK>,
+ <&gcc GCC_MDSS_VSYNC_CLK>,
+ <&gcc GCC_MDSS_MDP_CLK>,
+ <&gcc GCC_MDSS_BYTE0_CLK>,
+ <&gcc GCC_MDSS_PCLK0_CLK>,
+ <&gcc GCC_MDSS_ESC0_CLK>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_key_default>;
+
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
+ reserved-memory {
+ qseecom_mem: qseecom@...00000 {
+ reg = <0x0 0x84300000 0x0 0x2000000>;
+ no-map;
+ };
+
+ cont_splash_mem: cont-splash@...01000 {
+ reg = <0x0 0x90001000 0x0 (720 * 1520 * 3)>;
+ no-map;
+ };
+
+ reserved@...a1800 {
+ reg = <0x00 0xeefa1800 0x00 0x5e800>;
+ no-map;
+ };
+
+ ramoops@...00000 {
+ compatible = "ramoops";
+ reg = <0x0 0xef000000 0x0 0xbf800>;
+ console-size = <0x40000>;
+ pmsg-size = <0x40000>;
+ record-size = <0x3f800>;
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&hsusb_phy {
+ vdd-supply = <&pm8953_l3>;
+ vdda-pll-supply = <&pm8953_l7>;
+ vdda-phy-dpdm-supply = <&pm8953_l13>;
+
+ status = "okay";
+};
+
+&i2c_3 {
+ status = "okay";
+
+ touchscreen@41 {
+ compatible = "ilitek,ili2117";
+ reg = <0x41>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <65 IRQ_TYPE_EDGE_FALLING>;
+
+ touchscreen-inverted-x;
+ };
+};
+
+&i2c_5 {
+ status = "okay";
+
+ led-controller@36 {
+ compatible = "ti,lm3697";
+ reg = <0x36>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led: led@1 {
+ reg = <1>;
+ default-trigger = "backlight";
+ function = LED_FUNCTION_BACKLIGHT;
+ led-sources = <0 1 2>;
+ };
+ };
+};
+
+&pm8953_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
+};
+
+&rpm_requests {
+ regulators {
+ compatible = "qcom,rpm-pm8953-regulators";
+
+ vdd_l1-supply = <&pm8953_s3>;
+ vdd_l2_l3-supply = <&pm8953_s3>;
+ vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
+ vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
+ vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
+
+ pm8953_s3: s3 {
+ regulator-min-microvolt = <984000>;
+ regulator-max-microvolt = <1240000>;
+ };
+
+ pm8953_s4: s4 {
+ regulator-min-microvolt = <1036000>;
+ regulator-max-microvolt = <2040000>;
+ };
+
+ pm8953_l1: l1 {
+ regulator-min-microvolt = <975000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ pm8953_l2: l2 {
+ regulator-min-microvolt = <975000>;
+ regulator-max-microvolt = <1175000>;
+ };
+
+ pm8953_l3: l3 {
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <925000>;
+ regulator-allow-set-load;
+ };
+
+ pm8953_l5: l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8953_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ pm8953_l7: l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1900000>;
+ };
+
+ pm8953_l8: l8 {
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ };
+
+ pm8953_l9: l9 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8953_l10: l10 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8953_l11: l11 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8953_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8953_l13: l13 {
+ regulator-min-microvolt = <3125000>;
+ regulator-max-microvolt = <3125000>;
+ };
+
+ pm8953_l16: l16 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8953_l17: l17 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pm8953_l18: l18 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2700000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ pm8953_l19: l19 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ pm8953_l22: l22 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ pm8953_l23: l23 {
+ regulator-min-microvolt = <975000>;
+ regulator-max-microvolt = <1225000>;
+ };
+ };
+};
+
+&sdhc_1 {
+ vmmc-supply = <&pm8953_l8>;
+ vqmmc-supply = <&pm8953_l5>;
+
+ status = "okay";
+};
+
+&sdhc_2 {
+ vmmc-supply = <&pm8953_l11>;
+ vqmmc-supply = <&pm8953_l12>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <96 4>;
+};
+
+&usb3 {
+ status = "okay";
+};
+
+&usb3_dwc3 {
+ dr_mode = "peripheral";
+};
--
b4 0.10.1
Powered by blists - more mailing lists