lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Date:   Wed,  7 Dec 2022 15:05:02 +0800
From:   Yinbo Zhu <zhuyinbo@...ngson.cn>
To:     Linus Walleij <linus.walleij@...aro.org>,
        Bartosz Golaszewski <brgl@...ev.pl>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        WANG Xuerui <kernel@...0n.name>,
        Jiaxun Yang <jiaxun.yang@...goat.com>,
        Thomas Bogendoerfer <tsbogend@...ha.franken.de>,
        Juxin Gao <gaojuxin@...ngson.cn>,
        Bibo Mao <maobibo@...ngson.cn>,
        Yanteng Si <siyanteng@...ngson.cn>, linux-gpio@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        loongarch@...ts.linux.dev, linux-mips@...r.kernel.org,
        Arnaud Patard <apatard@...driva.com>,
        Huacai Chen <chenhuacai@...nel.org>,
        Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
        Yinbo Zhu <zhuyinbo@...ngson.cn>
Cc:     Jianmin Lv <lvjianmin@...ngson.cn>,
        Hongchen Zhang <zhanghongchen@...ngson.cn>,
        Liu Peibao <liupeibao@...ngson.cn>
Subject: [PATCH v11 2/2] gpio: loongson: add gpio driver support

The Loongson platforms GPIO controller contains 60 GPIO pins in total,
4 of which are dedicated GPIO pins, and the remaining 56 are reused
with other functions. Each GPIO can set input/output and has the
interrupt capability.

This driver added support for Loongson GPIO controller and support to
use DTS or ACPI to descibe GPIO device resources.

Signed-off-by: Jianmin Lv <lvjianmin@...ngson.cn>
Signed-off-by: Hongchen Zhang <zhanghongchen@...ngson.cn>
Signed-off-by: Liu Peibao <liupeibao@...ngson.cn>
Signed-off-by: Juxin Gao <gaojuxin@...ngson.cn>
Signed-off-by: Yinbo Zhu <zhuyinbo@...ngson.cn>
Reviewed-by: Linus Walleij <linus.walleij@...aro.org>
---
Change in v11:
		1. Place this patch behind the binding patch.
		2. Add select IRQ_DOMAIN_HIERARCHY.
		3. Add select OF_GPIO.
		4. Remove the acpi.h. 
		5. Used to_platform_device to gain pdev. 
		6. Used macros replace that get_direction() returned values.
		7. Fixup the parent irq number.
		8. Remove some ugly lgpio macros definition.
		9. Fixup the broken indentation. 
		10. Fixup the bgpio_int inappropriate parameters that use 'NULL'
		    replace '0'
Change in v10:
		1. Used unsigned int to replace int in loongson_gpio_chip_data for
		   offset.
		2. Used chip_data replace p_data.
		3. Save a line by initializing the variable when declaring it.
		4. Add a static inline to_loongson_gpio_chip() helper that wraps the
		   container_of() expansion and only needs a single argument.
		5. Return devm_gpiochip_add_data directly in loongson_gpio_init. 
		6. Drop __maybe_unused in loongson_gpio_init.
Change in v9:
		1. Fixup the xxx_device_id data field naming method. 
		2. Remove the "offset >= chip->ngpio" judgement in loongson_gpio_to_irq.
Change in v8:
		1. Return the loongson_gpio_init function directly in probe.
Change in v7:
		1. Add the gpio irqchip support.
		2. Replace __set_direction with loongson_commit_direction.
		3. Replace __set_level with loongson_commit_level. 
		4. Remove the parser of gsi_idx_map. 
		5. Add the support_irq flag.
		6. Replace string platform_data with chip_data.
		7. Remove the loongson_gpio_request.
Change in v6:
		1. Remove the bit mode keep byte mode in all function except 
		   loongson_gpio_init.
		2. Use bgpio_init replace bit mode. 
		3. Implement the function loongson_gpio_get_direction for byte mode.
		4. Set ngpios after call bgpio_init. 
		5. Use gpio-loongson-64bit.c as driver filename.
		6. Ignore that loongson legacy drvier and remove the patch about 
		   "gpio: loongson2ef: move driver to original location". 
Change in v5:
		1. Move legacy gpio driver to proper location.
		2. Remove the "gpio_base".
		3. Add of_device_id and acpi_device_id data field for platform
		   data. 
		4. Remove the ACPI_PTR().
		5. Remove the gpio label judgement logic and use mode instead.  
		6. Drop platform_loongson_gpio_get_props.
		7. Using devres for all resource. 
		8. Remove the loongson_gpio_remove.
		9. Remove the unmatched print information.
		10. Remove the loongson_gpio_exit.
Change in v4:
		1. Fixup name spelling about Signed-off-by. 
		2. Drop "series" here and everywhere else.
		3. Fixup the copyright in driver.
		4. Drop the "else" in loongson_gpio_request.
		5. Use trinocular operation replace the related logic.
		6. Remove lable judgement in context about "lgpio->chip.to_irq = 
		   loongson_gpio_to_irq"
		7. Use dev_err replace pr_err in probe.
		8. Make legacy platform_data should be left out of this patch.
		9. Remove the mips config in gpio Kconfig.
Change in v3:
		1. Move the gpio platform data struct from arch/ into include/linux/
		   platform_data/.
		2. Replace platform_gpio_data with loongson_gpio_platform_data in .c.
		3. Add maintainer in MAINTAINERS file for include/linux/platform_data/
		   gpio-loongson.h and gpio-loongson.c
Change in v2:
		1. Fixup of_loongson_gpio_get_props and remove the parse logic about
	           "loongson,conf_offset", "loongson,out_offset", "loongson,in_offset",
		   "loongson,gpio_base", "loongson,support_irq" then kernel driver will
		   initial them that depend compatible except "loongson,gpio_base".

 MAINTAINERS                        |   1 +
 drivers/gpio/Kconfig               |  14 ++
 drivers/gpio/Makefile              |   1 +
 drivers/gpio/gpio-loongson-64bit.c | 341 +++++++++++++++++++++++++++++
 4 files changed, 357 insertions(+)
 create mode 100644 drivers/gpio/gpio-loongson-64bit.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 1b379c981a0b..b8a02a60973d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12056,6 +12056,7 @@ M:	Yinbo Zhu <zhuyinbo@...ngson.cn>
 L:	linux-gpio@...r.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml
+F:	drivers/gpio/gpio-loongson-64bit.c
 
 LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI)
 M:	Sathya Prakash <sathya.prakash@...adcom.com>
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index a01af1180616..feff82e1bc97 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -381,6 +381,20 @@ config GPIO_LOONGSON
 	help
 	  Driver for GPIO functionality on Loongson-2F/3A/3B processors.
 
+config GPIO_LOONGSON_64BIT
+	tristate "Loongson 64 bit GPIO support"
+	depends on LOONGARCH || COMPILE_TEST
+	select OF_GPIO
+	select GPIO_GENERIC
+	select GPIOLIB_IRQCHIP
+	select IRQ_DOMAIN_HIERARCHY
+	help
+	  Say yes here to support the GPIO functionality of a number of
+	  Loongson series of chips. The Loongson GPIO controller supports
+	  up to 60 GPIOS in total, 4 of which are dedicated GPIO pins, and
+	  the remaining 56 are reused with other functions, with edge or
+	  level triggered interrupts.
+
 config GPIO_LPC18XX
 	tristate "NXP LPC18XX/43XX GPIO support"
 	default y if ARCH_LPC18XX
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 29e3beb6548c..fc832484cc77 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -78,6 +78,7 @@ obj-$(CONFIG_GPIO_KEMPLD)		+= gpio-kempld.o
 obj-$(CONFIG_GPIO_LOGICVC)		+= gpio-logicvc.o
 obj-$(CONFIG_GPIO_LOONGSON1)		+= gpio-loongson1.o
 obj-$(CONFIG_GPIO_LOONGSON)		+= gpio-loongson.o
+obj-$(CONFIG_GPIO_LOONGSON_64BIT)	+= gpio-loongson-64bit.o
 obj-$(CONFIG_GPIO_LP3943)		+= gpio-lp3943.o
 obj-$(CONFIG_GPIO_LP873X)		+= gpio-lp873x.o
 obj-$(CONFIG_GPIO_LP87565)		+= gpio-lp87565.o
diff --git a/drivers/gpio/gpio-loongson-64bit.c b/drivers/gpio/gpio-loongson-64bit.c
new file mode 100644
index 000000000000..3331e32804cb
--- /dev/null
+++ b/drivers/gpio/gpio-loongson-64bit.c
@@ -0,0 +1,341 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Loongson GPIO Support
+ *
+ * Copyright (C) 2022 Loongson Technology Corporation Limited
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/err.h>
+#include <linux/gpio/driver.h>
+#include <linux/platform_device.h>
+#include <linux/bitops.h>
+#include <linux/of_irq.h>
+#include <asm/types.h>
+
+enum loongson_gpio_mode {
+	BIT_CTRL_MODE,
+	BYTE_CTRL_MODE,
+};
+
+struct loongson_gpio_chip_data {
+	const char		*label;
+	enum loongson_gpio_mode	mode;
+	unsigned int		conf_offset;
+	unsigned int		out_offset;
+	unsigned int		in_offset;
+	bool			support_irq;
+};
+
+struct loongson_gpio_chip {
+	struct gpio_chip	chip;
+	struct fwnode_handle	*fwnode;
+	spinlock_t		lock;
+	void __iomem		*reg_base;
+	const struct loongson_gpio_chip_data *chip_data;
+};
+
+static inline struct loongson_gpio_chip *to_loongson_gpio_chip(struct gpio_chip *chip)
+{
+	return container_of(chip, struct loongson_gpio_chip, chip);
+}
+
+static inline void loongson_commit_direction(struct loongson_gpio_chip *lgpio, unsigned int pin,
+					     int input)
+{
+	u8 bval = input ? 1 : 0;
+
+	writeb(bval, lgpio->reg_base + lgpio->chip_data->conf_offset + pin);
+}
+
+static void loongson_commit_level(struct loongson_gpio_chip *lgpio, unsigned int pin, int high)
+{
+	u8 bval = high ? 1 : 0;
+
+	writeb(bval, lgpio->reg_base + lgpio->chip_data->out_offset + pin);
+}
+
+static int loongson_gpio_direction_input(struct gpio_chip *chip, unsigned int pin)
+{
+	unsigned long flags;
+	struct loongson_gpio_chip *lgpio = to_loongson_gpio_chip(chip);
+
+	spin_lock_irqsave(&lgpio->lock, flags);
+	loongson_commit_direction(lgpio, pin, 1);
+	spin_unlock_irqrestore(&lgpio->lock, flags);
+
+	return 0;
+}
+
+static int loongson_gpio_direction_output(struct gpio_chip *chip, unsigned int pin, int value)
+{
+	unsigned long flags;
+	struct loongson_gpio_chip *lgpio = to_loongson_gpio_chip(chip);
+
+	spin_lock_irqsave(&lgpio->lock, flags);
+	loongson_commit_level(lgpio, pin, value);
+	loongson_commit_direction(lgpio, pin, 0);
+	spin_unlock_irqrestore(&lgpio->lock, flags);
+
+	return 0;
+}
+
+static int loongson_gpio_get(struct gpio_chip *chip, unsigned int pin)
+{
+	u8  bval;
+	int val;
+	struct loongson_gpio_chip *lgpio = to_loongson_gpio_chip(chip);
+
+	bval = readb(lgpio->reg_base + lgpio->chip_data->in_offset + pin);
+	val = bval & 1;
+
+	return val;
+}
+
+static int loongson_gpio_get_direction(struct gpio_chip *chip, unsigned int pin)
+{
+	u8  bval;
+	struct loongson_gpio_chip *lgpio = to_loongson_gpio_chip(chip);
+
+	bval = readb(lgpio->reg_base + lgpio->chip_data->conf_offset + pin);
+	if (bval & 1)
+		return GPIO_LINE_DIRECTION_IN;
+
+	return GPIO_LINE_DIRECTION_OUT;
+}
+
+static void loongson_gpio_set(struct gpio_chip *chip, unsigned int pin, int value)
+{
+	unsigned long flags;
+	struct loongson_gpio_chip *lgpio = to_loongson_gpio_chip(chip);
+
+	spin_lock_irqsave(&lgpio->lock, flags);
+	loongson_commit_level(lgpio, pin, value);
+	spin_unlock_irqrestore(&lgpio->lock, flags);
+}
+
+static int loongson_gpio_to_irq(struct gpio_chip *chip, unsigned int offset)
+{
+	struct platform_device *pdev = to_platform_device(chip->parent);
+
+	return platform_get_irq(pdev, offset);
+}
+
+static void loongson_gpio_mask_irq(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+
+	irq_chip_mask_parent(d);
+	gpiochip_disable_irq(gc, d->hwirq);
+}
+
+static void loongson_gpio_irq_unmask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+
+	gpiochip_enable_irq(gc, d->hwirq);
+	irq_chip_unmask_parent(d);
+}
+
+static int loongson_gpio_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		irq_set_handler_locked(d, handle_edge_irq);
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		irq_set_handler_locked(d, handle_edge_irq);
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		irq_set_handler_locked(d, handle_level_irq);
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		irq_set_handler_locked(d, handle_level_irq);
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		irq_set_handler_locked(d, handle_edge_irq);
+		break;
+	case IRQ_TYPE_NONE:
+	default:
+		return -EINVAL;
+	}
+
+	return irq_chip_set_type_parent(d, type);
+}
+
+static const struct irq_chip loongson_gpio_irqchip = {
+	.name = "loongson-gpio-irqchip",
+	.irq_mask = loongson_gpio_mask_irq,
+	.irq_unmask = loongson_gpio_irq_unmask,
+	.irq_set_type = loongson_gpio_irq_set_type,
+	.flags = IRQCHIP_IMMUTABLE,
+	GPIOCHIP_IRQ_RESOURCE_HELPERS,
+};
+
+static int loongson_gpio_child_to_parent_hwirq(struct gpio_chip *gc,
+					     unsigned int child,
+					     unsigned int child_type,
+					     unsigned int *parent,
+					     unsigned int *parent_type)
+{
+	*parent_type = child_type;
+
+	/* GPIO lines 0..3 have dedicated IRQs */
+	if (child >= 0 && child <= 3) {
+		*parent = child + 28;
+		return 0;
+	}
+
+	if (child >= 4 && child <= 31) {
+		*parent = 26;
+		return 0;
+	}
+
+	if (child >= 32 && child <= 63) {
+		*parent = 27;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static int loongson_gpio_init(struct device *dev, struct loongson_gpio_chip *lgpio,
+			      struct device_node *np, void __iomem *reg_base)
+{
+	int ret;
+	u32 ngpios;
+	struct irq_domain *parent;
+	struct gpio_irq_chip *girq;
+	struct device_node *irq_parent;
+
+	lgpio->reg_base = reg_base;
+
+	if (lgpio->chip_data->mode == BIT_CTRL_MODE) {
+		ret = bgpio_init(&lgpio->chip, dev, 8,
+				lgpio->reg_base + lgpio->chip_data->in_offset,
+				lgpio->reg_base + lgpio->chip_data->out_offset,
+				NULL,
+				lgpio->reg_base + lgpio->chip_data->conf_offset,
+				NULL, 0);
+		if (ret) {
+			dev_err(dev, "unable to init generic GPIO\n");
+			return ret;
+		}
+	} else {
+		lgpio->chip.direction_input = loongson_gpio_direction_input;
+		lgpio->chip.get = loongson_gpio_get;
+		lgpio->chip.get_direction = loongson_gpio_get_direction;
+		lgpio->chip.direction_output = loongson_gpio_direction_output;
+		lgpio->chip.set = loongson_gpio_set;
+		lgpio->chip.can_sleep = 0;
+		lgpio->chip.of_node = np;
+		lgpio->chip.parent = dev;
+		spin_lock_init(&lgpio->lock);
+	}
+
+	device_property_read_u32(dev, "ngpios", &ngpios);
+
+	lgpio->chip.ngpio = ngpios;
+	lgpio->chip.label = lgpio->chip_data->label;
+
+	if (lgpio->chip_data->support_irq == true) {
+		lgpio->chip.to_irq = loongson_gpio_to_irq;
+		irq_parent = of_irq_find_parent(np);
+		if (irq_parent)
+			parent = irq_find_host(irq_parent);
+
+		lgpio->fwnode = of_node_to_fwnode(np);
+
+		girq = &lgpio->chip.irq;
+		gpio_irq_chip_set_chip(girq, &loongson_gpio_irqchip);
+		girq->fwnode = lgpio->fwnode;
+		girq->parent_domain = parent;
+		girq->child_to_parent_hwirq = loongson_gpio_child_to_parent_hwirq;
+		girq->handler = handle_bad_irq;
+		girq->default_type = IRQ_TYPE_NONE;
+	}
+
+	return devm_gpiochip_add_data(dev, &lgpio->chip, lgpio);
+}
+
+static int loongson_gpio_probe(struct platform_device *pdev)
+{
+	void __iomem *reg_base;
+	struct loongson_gpio_chip *lgpio;
+	struct device_node *np = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
+
+	lgpio = devm_kzalloc(dev, sizeof(*lgpio), GFP_KERNEL);
+	if (!lgpio)
+		return -ENOMEM;
+
+	lgpio->chip_data = device_get_match_data(dev);
+
+	reg_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(reg_base))
+		return PTR_ERR(reg_base);
+
+	return loongson_gpio_init(dev, lgpio, np, reg_base);
+}
+
+static const struct loongson_gpio_chip_data loongson_gpio_ls2k_data = {
+	.label = "ls2k_gpio",
+	.mode = BIT_CTRL_MODE,
+	.conf_offset = 0x0,
+	.in_offset = 0x10,
+	.out_offset = 0x20,
+	.support_irq = true,
+};
+
+static const struct loongson_gpio_chip_data loongson_gpio_ls7a_data = {
+	.label = "ls7a_gpio",
+	.mode = BYTE_CTRL_MODE,
+	.conf_offset = 0x800,
+	.in_offset = 0x900,
+	.out_offset = 0xa00,
+	.support_irq = false,
+};
+
+static const struct of_device_id loongson_gpio_of_match[] = {
+	{
+		.compatible = "loongson,ls2k-gpio",
+		.data = &loongson_gpio_ls2k_data,
+	},
+	{
+		.compatible = "loongson,ls7a-gpio",
+		.data = &loongson_gpio_ls7a_data,
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, loongson_gpio_of_match);
+
+static const struct acpi_device_id loongson_gpio_acpi_match[] = {
+	{
+		.id = "LOON0002",
+		.driver_data = (kernel_ulong_t)&loongson_gpio_ls7a_data,
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(acpi, loongson_gpio_acpi_match);
+
+static struct platform_driver loongson_gpio_driver = {
+	.driver = {
+		.name = "loongson-gpio",
+		.owner = THIS_MODULE,
+		.of_match_table = loongson_gpio_of_match,
+		.acpi_match_table = loongson_gpio_acpi_match,
+	},
+	.probe = loongson_gpio_probe,
+};
+
+static int __init loongson_gpio_setup(void)
+{
+	return platform_driver_register(&loongson_gpio_driver);
+}
+postcore_initcall(loongson_gpio_setup);
+
+MODULE_DESCRIPTION("Loongson gpio driver");
+MODULE_LICENSE("GPL");
-- 
2.31.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ