lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20221207-rpi-dsi-bridge-v1-5-8f68ee0b0adb@cerno.tech>
Date:   Wed, 07 Dec 2022 11:22:48 +0100
From:   Maxime Ripard <maxime@...no.tech>
To:     Emma Anholt <emma@...olt.net>, Maxime Ripard <mripard@...nel.org>,
        David Airlie <airlied@...il.com>,
        Daniel Vetter <daniel@...ll.ch>
Cc:     dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org,
        Dave Stevenson <dave.stevenson@...pberrypi.com>,
        Maxime Ripard <maxime@...no.tech>
Subject: [PATCH 5/6] drm/vc4: dsi: Convert to using a bridge instead of encoder

From: Dave Stevenson <dave.stevenson@...pberrypi.com>

Remove the encoder functions, and create a bridge attached to
this dumb encoder which implements the same functionality.

As a bridge has state which an encoder doesn't, we need to
add the state management functions as well.

As there is no bridge atomic_mode_set, move the initialisation
code that was in mode_set into _pre_enable.
The code to actually enable and disable sending video are split
from the general control into _enable and _disable.

Signed-off-by: Dave Stevenson <dave.stevenson@...pberrypi.com>
Signed-off-by: Maxime Ripard <maxime@...no.tech>
---
 drivers/gpu/drm/vc4/vc4_dsi.c | 121 +++++++++++++++++++++++++++++++-----------
 1 file changed, 90 insertions(+), 31 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c
index b90186f38749..a7b8ffd995b0 100644
--- a/drivers/gpu/drm/vc4/vc4_dsi.c
+++ b/drivers/gpu/drm/vc4/vc4_dsi.c
@@ -557,6 +557,7 @@ struct vc4_dsi {
 	struct platform_device *pdev;
 
 	struct drm_bridge *out_bridge;
+	struct drm_bridge bridge;
 
 	void __iomem *regs;
 
@@ -608,6 +609,12 @@ to_vc4_dsi(struct drm_encoder *encoder)
 	return container_of(encoder, struct vc4_dsi, encoder.base);
 }
 
+static inline struct vc4_dsi *
+bridge_to_vc4_dsi(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct vc4_dsi, bridge);
+}
+
 static inline void
 dsi_dma_workaround_write(struct vc4_dsi *dsi, u32 offset, u32 val)
 {
@@ -789,10 +796,21 @@ dsi_esc_timing(u32 ns)
 	return DIV_ROUND_UP(ns, ESC_TIME_NS);
 }
 
-static void vc4_dsi_encoder_disable(struct drm_encoder *encoder,
-				    struct drm_atomic_state *state)
+static void vc4_dsi_bridge_disable(struct drm_bridge *bridge,
+				   struct drm_bridge_state *state)
 {
-	struct vc4_dsi *dsi = to_vc4_dsi(encoder);
+	struct vc4_dsi *dsi = bridge_to_vc4_dsi(bridge);
+	u32 disp0_ctrl;
+
+	disp0_ctrl = DSI_PORT_READ(DISP0_CTRL);
+	disp0_ctrl &= ~DSI_DISP0_ENABLE;
+	DSI_PORT_WRITE(DISP0_CTRL, disp0_ctrl);
+}
+
+static void vc4_dsi_bridge_post_disable(struct drm_bridge *bridge,
+					struct drm_bridge_state *state)
+{
+	struct vc4_dsi *dsi = bridge_to_vc4_dsi(bridge);
 	struct device *dev = &dsi->pdev->dev;
 
 	vc4_dsi_ulps(dsi, true);
@@ -817,11 +835,11 @@ static void vc4_dsi_encoder_disable(struct drm_encoder *encoder,
  * higher-than-expected clock rate to the panel, but that's what the
  * firmware does too.
  */
-static bool vc4_dsi_encoder_mode_fixup(struct drm_encoder *encoder,
-				       const struct drm_display_mode *mode,
-				       struct drm_display_mode *adjusted_mode)
+static bool vc4_dsi_bridge_mode_fixup(struct drm_bridge *bridge,
+				      const struct drm_display_mode *mode,
+				      struct drm_display_mode *adjusted_mode)
 {
-	struct vc4_dsi *dsi = to_vc4_dsi(encoder);
+	struct vc4_dsi *dsi = bridge_to_vc4_dsi(bridge);
 	struct clk *phy_parent = clk_get_parent(dsi->pll_phy_clock);
 	unsigned long parent_rate = clk_get_rate(phy_parent);
 	unsigned long pixel_clock_hz = mode->clock * 1000;
@@ -853,15 +871,18 @@ static bool vc4_dsi_encoder_mode_fixup(struct drm_encoder *encoder,
 	return true;
 }
 
-static void vc4_dsi_encoder_mode_set(struct drm_encoder *encoder,
-				     struct drm_crtc_state *crtc_state,
-				     struct drm_connector_state *conn_state)
+static void vc4_dsi_bridge_pre_enable(struct drm_bridge *bridge,
+				      struct drm_bridge_state *old_state)
 {
-	struct vc4_dsi *dsi = to_vc4_dsi(encoder);
+	struct drm_atomic_state *state = old_state->base.state;
+	struct vc4_dsi *dsi = bridge_to_vc4_dsi(bridge);
+	const struct drm_crtc_state *crtc_state;
 	struct device *dev = &dsi->pdev->dev;
 	const struct drm_display_mode *mode;
+	struct drm_connector *connector;
 	bool debug_dump_regs = false;
 	unsigned long hs_clock;
+	struct drm_crtc *crtc;
 	u32 ui_ns;
 	/* Minimum LP state duration in escape clock cycles. */
 	u32 lpx = dsi_esc_timing(60);
@@ -882,6 +903,14 @@ static void vc4_dsi_encoder_mode_set(struct drm_encoder *encoder,
 		drm_print_regset32(&p, &dsi->regset);
 	}
 
+	/*
+	 * Retrieve the CRTC adjusted mode. This requires a little dance to go
+	 * from the bridge to the encoder, to the connector and to the CRTC.
+	 */
+	connector = drm_atomic_get_new_connector_for_encoder(state,
+							     bridge->encoder);
+	crtc = drm_atomic_get_new_connector_state(state, connector)->crtc;
+	crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
 	mode = &crtc_state->adjusted_mode;
 
 	pixel_clock_hz = mode->clock * 1000;
@@ -1096,13 +1125,6 @@ static void vc4_dsi_encoder_mode_set(struct drm_encoder *encoder,
 		       ~DSI_PORT_BIT(PHY_AFEC0_RESET));
 
 	vc4_dsi_ulps(dsi, false);
-}
-
-static void vc4_dsi_encoder_enable(struct drm_encoder *encoder,
-				   struct drm_atomic_state *state)
-{
-	struct vc4_dsi *dsi = to_vc4_dsi(encoder);
-	bool debug_dump_regs = false;
 
 	if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) {
 		DSI_PORT_WRITE(DISP0_CTRL,
@@ -1111,13 +1133,23 @@ static void vc4_dsi_encoder_enable(struct drm_encoder *encoder,
 			       VC4_SET_FIELD(dsi->format, DSI_DISP0_PFORMAT) |
 			       VC4_SET_FIELD(DSI_DISP0_LP_STOP_PERFRAME,
 					     DSI_DISP0_LP_STOP_CTRL) |
-			       DSI_DISP0_ST_END |
-			       DSI_DISP0_ENABLE);
+			       DSI_DISP0_ST_END);
 	} else {
 		DSI_PORT_WRITE(DISP0_CTRL,
-			       DSI_DISP0_COMMAND_MODE |
-			       DSI_DISP0_ENABLE);
+			       DSI_DISP0_COMMAND_MODE);
 	}
+}
+
+static void vc4_dsi_bridge_enable(struct drm_bridge *bridge,
+				  struct drm_bridge_state *old_state)
+{
+	struct vc4_dsi *dsi = bridge_to_vc4_dsi(bridge);
+	bool debug_dump_regs = false;
+	u32 disp0_ctrl;
+
+	disp0_ctrl = DSI_PORT_READ(DISP0_CTRL);
+	disp0_ctrl |= DSI_DISP0_ENABLE;
+	DSI_PORT_WRITE(DISP0_CTRL, disp0_ctrl);
 
 	if (debug_dump_regs) {
 		struct drm_printer p = drm_info_printer(&dsi->pdev->dev);
@@ -1126,6 +1158,16 @@ static void vc4_dsi_encoder_enable(struct drm_encoder *encoder,
 	}
 }
 
+static int vc4_dsi_bridge_attach(struct drm_bridge *bridge,
+				 enum drm_bridge_attach_flags flags)
+{
+	struct vc4_dsi *dsi = bridge_to_vc4_dsi(bridge);
+
+	/* Attach the panel or bridge to the dsi bridge */
+	return drm_bridge_attach(bridge->encoder, dsi->out_bridge,
+				 &dsi->bridge, flags);
+}
+
 static ssize_t vc4_dsi_host_transfer(struct mipi_dsi_host *host,
 				     const struct mipi_dsi_msg *msg)
 {
@@ -1302,6 +1344,7 @@ static int vc4_dsi_host_attach(struct mipi_dsi_host *host,
 			       struct mipi_dsi_device *device)
 {
 	struct vc4_dsi *dsi = host_to_dsi(host);
+	int ret;
 
 	dsi->lanes = device->lanes;
 	dsi->channel = device->channel;
@@ -1336,7 +1379,15 @@ static int vc4_dsi_host_attach(struct mipi_dsi_host *host,
 		return 0;
 	}
 
-	return component_add(&dsi->pdev->dev, &vc4_dsi_ops);
+	drm_bridge_add(&dsi->bridge);
+
+	ret = component_add(&dsi->pdev->dev, &vc4_dsi_ops);
+	if (ret) {
+		drm_bridge_remove(&dsi->bridge);
+		return ret;
+	}
+
+	return 0;
 }
 
 static int vc4_dsi_host_detach(struct mipi_dsi_host *host,
@@ -1345,6 +1396,7 @@ static int vc4_dsi_host_detach(struct mipi_dsi_host *host,
 	struct vc4_dsi *dsi = host_to_dsi(host);
 
 	component_del(&dsi->pdev->dev, &vc4_dsi_ops);
+	drm_bridge_remove(&dsi->bridge);
 	return 0;
 }
 
@@ -1354,11 +1406,16 @@ static const struct mipi_dsi_host_ops vc4_dsi_host_ops = {
 	.transfer = vc4_dsi_host_transfer,
 };
 
-static const struct drm_encoder_helper_funcs vc4_dsi_encoder_helper_funcs = {
-	.atomic_disable = vc4_dsi_encoder_disable,
-	.atomic_enable = vc4_dsi_encoder_enable,
-	.mode_fixup = vc4_dsi_encoder_mode_fixup,
-	.atomic_mode_set = vc4_dsi_encoder_mode_set,
+static const struct drm_bridge_funcs vc4_dsi_bridge_funcs = {
+	.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
+	.atomic_reset = drm_atomic_helper_bridge_reset,
+	.atomic_pre_enable = vc4_dsi_bridge_pre_enable,
+	.atomic_enable = vc4_dsi_bridge_enable,
+	.atomic_disable = vc4_dsi_bridge_disable,
+	.atomic_post_disable = vc4_dsi_bridge_post_disable,
+	.attach = vc4_dsi_bridge_attach,
+	.mode_fixup = vc4_dsi_bridge_mode_fixup,
 };
 
 static int vc4_dsi_late_register(struct drm_encoder *encoder)
@@ -1733,13 +1790,11 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
 	if (ret)
 		return ret;
 
-	drm_encoder_helper_add(encoder, &vc4_dsi_encoder_helper_funcs);
-
 	ret = devm_pm_runtime_enable(dev);
 	if (ret)
 		return ret;
 
-	ret = drm_bridge_attach(encoder, dsi->out_bridge, NULL, 0);
+	ret = drm_bridge_attach(encoder, &dsi->bridge, NULL, 0);
 	if (ret)
 		return ret;
 
@@ -1761,7 +1816,11 @@ static int vc4_dsi_dev_probe(struct platform_device *pdev)
 	dev_set_drvdata(dev, dsi);
 
 	kref_init(&dsi->kref);
+
 	dsi->pdev = pdev;
+	dsi->bridge.funcs = &vc4_dsi_bridge_funcs;
+	dsi->bridge.of_node = dev->of_node;
+	dsi->bridge.type = DRM_MODE_CONNECTOR_DSI;
 	dsi->dsi_host.ops = &vc4_dsi_host_ops;
 	dsi->dsi_host.dev = dev;
 	mipi_dsi_host_register(&dsi->dsi_host);

-- 
2.38.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ