[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAJM55Z-0tkp31HWm=15AwZS3428JhOysXZgBOA54XE2fynaq-A@mail.gmail.com>
Date: Wed, 7 Dec 2022 14:47:06 +0100
From: Emil Renner Berthing <emil.renner.berthing@...onical.com>
To: Hal Feng <hal.feng@...rfivetech.com>
Cc: linux-riscv@...ts.infradead.org, devicetree@...r.kernel.org,
linux-gpio@...r.kernel.org, Conor Dooley <conor@...nel.org>,
Palmer Dabbelt <palmer@...belt.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Linus Walleij <linus.walleij@...aro.org>,
Jianlong Huang <jianlong.huang@...rfivetech.com>,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 4/5] pinctrl: starfive: Add StarFive JH7110 sys
controller driver
On Fri, 18 Nov 2022 at 02:11, Hal Feng <hal.feng@...rfivetech.com> wrote:
>
> From: Jianlong Huang <jianlong.huang@...rfivetech.com>
>
> Add pinctrl driver for StarFive JH7110 SoC sys pinctrl controller.
>
> Co-developed-by: Emil Renner Berthing <kernel@...il.dk>
> Signed-off-by: Emil Renner Berthing <kernel@...il.dk>
> Signed-off-by: Jianlong Huang <jianlong.huang@...rfivetech.com>
> Signed-off-by: Hal Feng <hal.feng@...rfivetech.com>
> ---
> MAINTAINERS | 7 +-
> drivers/pinctrl/starfive/Kconfig | 21 +
> drivers/pinctrl/starfive/Makefile | 5 +
> drivers/pinctrl/starfive/pinctrl-jh7110-sys.c | 464 +++++++++
> drivers/pinctrl/starfive/pinctrl-starfive.c | 972 ++++++++++++++++++
> drivers/pinctrl/starfive/pinctrl-starfive.h | 72 ++
> 6 files changed, 1538 insertions(+), 3 deletions(-)
> create mode 100644 drivers/pinctrl/starfive/pinctrl-jh7110-sys.c
> create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive.c
> create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index ec6647e2772f..a70c1d0f303e 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -19606,13 +19606,14 @@ F: Documentation/devicetree/bindings/clock/starfive*
> F: drivers/clk/starfive/
> F: include/dt-bindings/clock/starfive*
>
> -STARFIVE JH7100 PINCTRL DRIVER
> +STARFIVE PINCTRL DRIVER
There are now more than 1 driver, so please use DRIVERS
> M: Emil Renner Berthing <kernel@...il.dk>
> +M: Jianlong Huang <jianlong.huang@...rfivetech.com>
> L: linux-gpio@...r.kernel.org
> S: Maintained
> -F: Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml
> +F: Documentation/devicetree/bindings/pinctrl/starfive*
> F: drivers/pinctrl/starfive/
> -F: include/dt-bindings/pinctrl/pinctrl-starfive-jh7100.h
> +F: include/dt-bindings/pinctrl/pinctrl-starfive*
>
> STARFIVE RESET CONTROLLER DRIVERS
> M: Emil Renner Berthing <kernel@...il.dk>
> diff --git a/drivers/pinctrl/starfive/Kconfig b/drivers/pinctrl/starfive/Kconfig
> index 55c514e622f9..c7896a1f7d5a 100644
> --- a/drivers/pinctrl/starfive/Kconfig
> +++ b/drivers/pinctrl/starfive/Kconfig
> @@ -16,3 +16,24 @@ config PINCTRL_STARFIVE_JH7100
> This also provides an interface to the GPIO pins not used by other
> peripherals supporting inputs, outputs, configuring pull-up/pull-down
> and interrupts on input changes.
> +
> +config PINCTRL_STARFIVE
> + bool
Using PINCTRL_STARFIVE here is confusing, since it doesn't apply to the JH7100.
Please call this PINCTRL_STARFIVE_JH7110.
Also is there a reason this can't be tristate and the driver compiled
as a module?
> + select GENERIC_PINCTRL_GROUPS
> + select GENERIC_PINMUX_FUNCTIONS
> + select GENERIC_PINCONF
> + select GPIOLIB
> + select GPIOLIB_IRQCHIP
> + select OF_GPIO
> +
> +config PINCTRL_STARFIVE_JH7110
> + bool "Pinctrl and GPIO driver for the StarFive JH7110 SoC"
Here you seem to have 1 Kconfig option for 2 separate drivers:
pinctrl-jh7110-aon and pinctrl-jh7110-sys.
I'd have individual Kconfig options for each module,
PINCTRL_STARFIVE_JH7110_SYS and PINCTRL_STARFIVE_JH7110_AON.
> + depends on SOC_STARFIVE || COMPILE_TEST
> + depends on OF
> + select PINCTRL_STARFIVE
> + default SOC_STARFIVE
> + help
> + Say yes here to support pin control on the StarFive JH7110 SoC.
> + This also provides an interface to the GPIO pins not used by other
> + peripherals supporting inputs, outputs, configuring pull-up/pull-down
> + and interrupts on input changes.
> diff --git a/drivers/pinctrl/starfive/Makefile b/drivers/pinctrl/starfive/Makefile
> index 0293f26a0a99..404929f760e8 100644
> --- a/drivers/pinctrl/starfive/Makefile
> +++ b/drivers/pinctrl/starfive/Makefile
> @@ -1,3 +1,8 @@
> # SPDX-License-Identifier: GPL-2.0
>
> +# Core
> +obj-$(CONFIG_PINCTRL_STARFIVE) += pinctrl-starfive.o
This is confusing since it gives the impression that
pinctrl-starfive.o is used by all starfive drivers, but in reality
it's only used by the jh7110 drivers. Please group the lines by SoC.
> +# SoC Drivers
> obj-$(CONFIG_PINCTRL_STARFIVE_JH7100) += pinctrl-starfive-jh7100.o
> +obj-$(CONFIG_PINCTRL_STARFIVE_JH7110) += pinctrl-jh7110-sys.o
For consistency please call the module pinctrl-starfive-jh7110-sys.
> diff --git a/drivers/pinctrl/starfive/pinctrl-jh7110-sys.c b/drivers/pinctrl/starfive/pinctrl-jh7110-sys.c
> new file mode 100644
> index 000000000000..942e0b6e5ac6
> --- /dev/null
> +++ b/drivers/pinctrl/starfive/pinctrl-jh7110-sys.c
> @@ -0,0 +1,464 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Pinctrl / GPIO driver for StarFive JH7110 SoC sys controller
> + *
> + * Copyright (C) 2022 Emil Renner Berthing <kernel@...il.dk>
> + * Copyright (C) 2022 StarFive Technology Co., Ltd.
> + */
> +
> +#include <linux/bits.h>
> +#include <linux/clk.h>
> +#include <linux/gpio/driver.h>
> +#include <linux/io.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +#include <linux/spinlock.h>
> +
> +#include <linux/pinctrl/pinctrl.h>
> +#include <linux/pinctrl/pinmux.h>
> +
> +#include <dt-bindings/pinctrl/pinctrl-starfive-jh7110.h>
> +
> +#include "../core.h"
> +#include "../pinctrl-utils.h"
> +#include "../pinmux.h"
> +#include "../pinconf.h"
> +#include "pinctrl-starfive.h"
> +
> +#define JH7110_SYS_NGPIO 64
> +#define JH7110_SYS_GC_BASE 0
> +
> +/* registers */
> +#define JH7110_SYS_DOEN 0x000
> +#define JH7110_SYS_DOUT 0x040
> +#define JH7110_SYS_GPI 0x080
> +#define JH7110_SYS_GPIOIN 0x118
> +
> +#define JH7110_SYS_GPIOEN 0x0dc
> +#define JH7110_SYS_GPIOIS0 0x0e0
> +#define JH7110_SYS_GPIOIS1 0x0e4
> +#define JH7110_SYS_GPIOIC0 0x0e8
> +#define JH7110_SYS_GPIOIC1 0x0ec
> +#define JH7110_SYS_GPIOIBE0 0x0f0
> +#define JH7110_SYS_GPIOIBE1 0x0f4
> +#define JH7110_SYS_GPIOIEV0 0x0f8
> +#define JH7110_SYS_GPIOIEV1 0x0fc
> +#define JH7110_SYS_GPIOIE0 0x100
> +#define JH7110_SYS_GPIOIE1 0x104
> +#define JH7110_SYS_GPIORIS0 0x108
> +#define JH7110_SYS_GPIORIS1 0x10c
> +#define JH7110_SYS_GPIOMIS0 0x110
> +#define JH7110_SYS_GPIOMIS1 0x114
> +
> +#define SYS_GPO_PDA_0_74_CFG 0x120
> +#define SYS_GPO_PDA_89_94_CFG 0x284
These macros suddenly drop the JH7110_ prefix. Why?
> +static const struct pinctrl_pin_desc jh7110_sys_pins[] = {
> + PINCTRL_PIN(PAD_GPIO0, "GPIO0"),
> + PINCTRL_PIN(PAD_GPIO1, "GPIO1"),
> + PINCTRL_PIN(PAD_GPIO2, "GPIO2"),
> + PINCTRL_PIN(PAD_GPIO3, "GPIO3"),
> + PINCTRL_PIN(PAD_GPIO4, "GPIO4"),
> + PINCTRL_PIN(PAD_GPIO5, "GPIO5"),
> + PINCTRL_PIN(PAD_GPIO6, "GPIO6"),
> + PINCTRL_PIN(PAD_GPIO7, "GPIO7"),
> + PINCTRL_PIN(PAD_GPIO8, "GPIO8"),
> + PINCTRL_PIN(PAD_GPIO9, "GPIO9"),
> + PINCTRL_PIN(PAD_GPIO10, "GPIO10"),
> + PINCTRL_PIN(PAD_GPIO11, "GPIO11"),
> + PINCTRL_PIN(PAD_GPIO12, "GPIO12"),
> + PINCTRL_PIN(PAD_GPIO13, "GPIO13"),
> + PINCTRL_PIN(PAD_GPIO14, "GPIO14"),
> + PINCTRL_PIN(PAD_GPIO15, "GPIO15"),
> + PINCTRL_PIN(PAD_GPIO16, "GPIO16"),
> + PINCTRL_PIN(PAD_GPIO17, "GPIO17"),
> + PINCTRL_PIN(PAD_GPIO18, "GPIO18"),
> + PINCTRL_PIN(PAD_GPIO19, "GPIO19"),
> + PINCTRL_PIN(PAD_GPIO20, "GPIO20"),
> + PINCTRL_PIN(PAD_GPIO21, "GPIO21"),
> + PINCTRL_PIN(PAD_GPIO22, "GPIO22"),
> + PINCTRL_PIN(PAD_GPIO23, "GPIO23"),
> + PINCTRL_PIN(PAD_GPIO24, "GPIO24"),
> + PINCTRL_PIN(PAD_GPIO25, "GPIO25"),
> + PINCTRL_PIN(PAD_GPIO26, "GPIO26"),
> + PINCTRL_PIN(PAD_GPIO27, "GPIO27"),
> + PINCTRL_PIN(PAD_GPIO28, "GPIO28"),
> + PINCTRL_PIN(PAD_GPIO29, "GPIO29"),
> + PINCTRL_PIN(PAD_GPIO30, "GPIO30"),
> + PINCTRL_PIN(PAD_GPIO31, "GPIO31"),
> + PINCTRL_PIN(PAD_GPIO32, "GPIO32"),
> + PINCTRL_PIN(PAD_GPIO33, "GPIO33"),
> + PINCTRL_PIN(PAD_GPIO34, "GPIO34"),
> + PINCTRL_PIN(PAD_GPIO35, "GPIO35"),
> + PINCTRL_PIN(PAD_GPIO36, "GPIO36"),
> + PINCTRL_PIN(PAD_GPIO37, "GPIO37"),
> + PINCTRL_PIN(PAD_GPIO38, "GPIO38"),
> + PINCTRL_PIN(PAD_GPIO39, "GPIO39"),
> + PINCTRL_PIN(PAD_GPIO40, "GPIO40"),
> + PINCTRL_PIN(PAD_GPIO41, "GPIO41"),
> + PINCTRL_PIN(PAD_GPIO42, "GPIO42"),
> + PINCTRL_PIN(PAD_GPIO43, "GPIO43"),
> + PINCTRL_PIN(PAD_GPIO44, "GPIO44"),
> + PINCTRL_PIN(PAD_GPIO45, "GPIO45"),
> + PINCTRL_PIN(PAD_GPIO46, "GPIO46"),
> + PINCTRL_PIN(PAD_GPIO47, "GPIO47"),
> + PINCTRL_PIN(PAD_GPIO48, "GPIO48"),
> + PINCTRL_PIN(PAD_GPIO49, "GPIO49"),
> + PINCTRL_PIN(PAD_GPIO50, "GPIO50"),
> + PINCTRL_PIN(PAD_GPIO51, "GPIO51"),
> + PINCTRL_PIN(PAD_GPIO52, "GPIO52"),
> + PINCTRL_PIN(PAD_GPIO53, "GPIO53"),
> + PINCTRL_PIN(PAD_GPIO54, "GPIO54"),
> + PINCTRL_PIN(PAD_GPIO55, "GPIO55"),
> + PINCTRL_PIN(PAD_GPIO56, "GPIO56"),
> + PINCTRL_PIN(PAD_GPIO57, "GPIO57"),
> + PINCTRL_PIN(PAD_GPIO58, "GPIO58"),
> + PINCTRL_PIN(PAD_GPIO59, "GPIO59"),
> + PINCTRL_PIN(PAD_GPIO60, "GPIO60"),
> + PINCTRL_PIN(PAD_GPIO61, "GPIO61"),
> + PINCTRL_PIN(PAD_GPIO62, "GPIO62"),
> + PINCTRL_PIN(PAD_GPIO63, "GPIO63"),
> + PINCTRL_PIN(PAD_SD0_CLK, "SD0_CLK"),
> + PINCTRL_PIN(PAD_SD0_CMD, "SD0_CMD"),
> + PINCTRL_PIN(PAD_SD0_DATA0, "SD0_DATA0"),
> + PINCTRL_PIN(PAD_SD0_DATA1, "SD0_DATA1"),
> + PINCTRL_PIN(PAD_SD0_DATA2, "SD0_DATA2"),
> + PINCTRL_PIN(PAD_SD0_DATA3, "SD0_DATA3"),
> + PINCTRL_PIN(PAD_SD0_DATA4, "SD0_DATA4"),
> + PINCTRL_PIN(PAD_SD0_DATA5, "SD0_DATA5"),
> + PINCTRL_PIN(PAD_SD0_DATA6, "SD0_DATA6"),
> + PINCTRL_PIN(PAD_SD0_DATA7, "SD0_DATA7"),
> + PINCTRL_PIN(PAD_SD0_STRB, "SD0_STRB"),
> + PINCTRL_PIN(PAD_GMAC1_MDC, "GMAC1_MDC"),
> + PINCTRL_PIN(PAD_GMAC1_MDIO, "GMAC1_MDIO"),
> + PINCTRL_PIN(PAD_GMAC1_RXD0, "GMAC1_RXD0"),
> + PINCTRL_PIN(PAD_GMAC1_RXD1, "GMAC1_RXD1"),
> + PINCTRL_PIN(PAD_GMAC1_RXD2, "GMAC1_RXD2"),
> + PINCTRL_PIN(PAD_GMAC1_RXD3, "GMAC1_RXD3"),
> + PINCTRL_PIN(PAD_GMAC1_RXDV, "GMAC1_RXDV"),
> + PINCTRL_PIN(PAD_GMAC1_RXC, "GMAC1_RXC"),
> + PINCTRL_PIN(PAD_GMAC1_TXD0, "GMAC1_TXD0"),
> + PINCTRL_PIN(PAD_GMAC1_TXD1, "GMAC1_TXD1"),
> + PINCTRL_PIN(PAD_GMAC1_TXD2, "GMAC1_TXD2"),
> + PINCTRL_PIN(PAD_GMAC1_TXD3, "GMAC1_TXD3"),
> + PINCTRL_PIN(PAD_GMAC1_TXEN, "GMAC1_TXEN"),
> + PINCTRL_PIN(PAD_GMAC1_TXC, "GMAC1_TXC"),
> + PINCTRL_PIN(PAD_QSPI_SCLK, "QSPI_SCLK"),
> + PINCTRL_PIN(PAD_QSPI_CS0, "QSPI_CS0"),
> + PINCTRL_PIN(PAD_QSPI_DATA0, "QSPI_DATA0"),
> + PINCTRL_PIN(PAD_QSPI_DATA1, "QSPI_DATA1"),
> + PINCTRL_PIN(PAD_QSPI_DATA2, "QSPI_DATA2"),
> + PINCTRL_PIN(PAD_QSPI_DATA3, "QSPI_DATA3"),
> +};
> +
> +struct jh7110_func_sel {
> + u16 offset;
> + u8 shift;
> + u8 max;
> +};
> +
> +static const struct jh7110_func_sel
> + jh7110_sys_func_sel[ARRAY_SIZE(jh7110_sys_pins)] = {
> + [PAD_GMAC1_RXC] = { 0x29c, 0, 1 },
> + [PAD_GPIO10] = { 0x29c, 2, 3 },
> + [PAD_GPIO11] = { 0x29c, 5, 3 },
> + [PAD_GPIO12] = { 0x29c, 8, 3 },
> + [PAD_GPIO13] = { 0x29c, 11, 3 },
> + [PAD_GPIO14] = { 0x29c, 14, 3 },
> + [PAD_GPIO15] = { 0x29c, 17, 3 },
> + [PAD_GPIO16] = { 0x29c, 20, 3 },
> + [PAD_GPIO17] = { 0x29c, 23, 3 },
> + [PAD_GPIO18] = { 0x29c, 26, 3 },
> + [PAD_GPIO19] = { 0x29c, 29, 3 },
> +
> + [PAD_GPIO20] = { 0x2a0, 0, 3 },
> + [PAD_GPIO21] = { 0x2a0, 3, 3 },
> + [PAD_GPIO22] = { 0x2a0, 6, 3 },
> + [PAD_GPIO23] = { 0x2a0, 9, 3 },
> + [PAD_GPIO24] = { 0x2a0, 12, 3 },
> + [PAD_GPIO25] = { 0x2a0, 15, 3 },
> + [PAD_GPIO26] = { 0x2a0, 18, 3 },
> + [PAD_GPIO27] = { 0x2a0, 21, 3 },
> + [PAD_GPIO28] = { 0x2a0, 24, 3 },
> + [PAD_GPIO29] = { 0x2a0, 27, 3 },
> +
> + [PAD_GPIO30] = { 0x2a4, 0, 3 },
> + [PAD_GPIO31] = { 0x2a4, 3, 3 },
> + [PAD_GPIO32] = { 0x2a4, 6, 3 },
> + [PAD_GPIO33] = { 0x2a4, 9, 3 },
> + [PAD_GPIO34] = { 0x2a4, 12, 3 },
> + [PAD_GPIO35] = { 0x2a4, 15, 3 },
> + [PAD_GPIO36] = { 0x2a4, 17, 3 },
> + [PAD_GPIO37] = { 0x2a4, 20, 3 },
> + [PAD_GPIO38] = { 0x2a4, 23, 3 },
> + [PAD_GPIO39] = { 0x2a4, 26, 3 },
> + [PAD_GPIO40] = { 0x2a4, 29, 3 },
> +
> + [PAD_GPIO41] = { 0x2a8, 0, 3 },
> + [PAD_GPIO42] = { 0x2a8, 3, 3 },
> + [PAD_GPIO43] = { 0x2a8, 6, 3 },
> + [PAD_GPIO44] = { 0x2a8, 9, 3 },
> + [PAD_GPIO45] = { 0x2a8, 12, 3 },
> + [PAD_GPIO46] = { 0x2a8, 15, 3 },
> + [PAD_GPIO47] = { 0x2a8, 18, 3 },
> + [PAD_GPIO48] = { 0x2a8, 21, 3 },
> + [PAD_GPIO49] = { 0x2a8, 24, 3 },
> + [PAD_GPIO50] = { 0x2a8, 27, 3 },
> + [PAD_GPIO51] = { 0x2a8, 30, 3 },
> +
> + [PAD_GPIO52] = { 0x2ac, 0, 3 },
> + [PAD_GPIO53] = { 0x2ac, 2, 3 },
> + [PAD_GPIO54] = { 0x2ac, 4, 3 },
> + [PAD_GPIO55] = { 0x2ac, 6, 3 },
> + [PAD_GPIO56] = { 0x2ac, 9, 3 },
> + [PAD_GPIO57] = { 0x2ac, 12, 3 },
> + [PAD_GPIO58] = { 0x2ac, 15, 3 },
> + [PAD_GPIO59] = { 0x2ac, 18, 3 },
> + [PAD_GPIO60] = { 0x2ac, 21, 3 },
> + [PAD_GPIO61] = { 0x2ac, 24, 3 },
> + [PAD_GPIO62] = { 0x2ac, 27, 3 },
> + [PAD_GPIO63] = { 0x2ac, 30, 3 },
> +
> + [PAD_GPIO6] = { 0x2b0, 0, 3 },
> + [PAD_GPIO7] = { 0x2b0, 2, 3 },
> + [PAD_GPIO8] = { 0x2b0, 5, 3 },
> + [PAD_GPIO9] = { 0x2b0, 8, 3 },
> +};
> +
> +struct jh7110_vin_group_sel {
> + u16 offset;
> + u8 shift;
> + u8 group;
> +};
> +
> +static const struct jh7110_vin_group_sel
> + jh7110_sys_vin_group_sel[ARRAY_SIZE(jh7110_sys_pins)] = {
> + [PAD_GPIO6] = { 0x2b4, 21, 0 },
> + [PAD_GPIO7] = { 0x2b4, 18, 0 },
> + [PAD_GPIO8] = { 0x2b4, 15, 0 },
> + [PAD_GPIO9] = { 0x2b0, 11, 0 },
> + [PAD_GPIO10] = { 0x2b0, 20, 0 },
> + [PAD_GPIO11] = { 0x2b0, 23, 0 },
> + [PAD_GPIO12] = { 0x2b0, 26, 0 },
> + [PAD_GPIO13] = { 0x2b0, 29, 0 },
> + [PAD_GPIO14] = { 0x2b4, 0, 0 },
> + [PAD_GPIO15] = { 0x2b4, 3, 0 },
> + [PAD_GPIO16] = { 0x2b4, 6, 0 },
> + [PAD_GPIO17] = { 0x2b4, 9, 0 },
> + [PAD_GPIO18] = { 0x2b4, 12, 0 },
> + [PAD_GPIO19] = { 0x2b0, 14, 0 },
> + [PAD_GPIO20] = { 0x2b0, 17, 0 },
> +
> + [PAD_GPIO21] = { 0x2b4, 21, 1 },
> + [PAD_GPIO22] = { 0x2b4, 18, 1 },
> + [PAD_GPIO23] = { 0x2b4, 15, 1 },
> + [PAD_GPIO24] = { 0x2b0, 11, 1 },
> + [PAD_GPIO25] = { 0x2b0, 20, 1 },
> + [PAD_GPIO26] = { 0x2b0, 23, 1 },
> + [PAD_GPIO27] = { 0x2b0, 26, 1 },
> + [PAD_GPIO28] = { 0x2b0, 29, 1 },
> + [PAD_GPIO29] = { 0x2b4, 0, 1 },
> + [PAD_GPIO30] = { 0x2b4, 3, 1 },
> + [PAD_GPIO31] = { 0x2b4, 6, 1 },
> + [PAD_GPIO32] = { 0x2b4, 9, 1 },
> + [PAD_GPIO33] = { 0x2b4, 12, 1 },
> + [PAD_GPIO34] = { 0x2b0, 14, 1 },
> + [PAD_GPIO35] = { 0x2b0, 17, 1 },
> +
> + [PAD_GPIO36] = { 0x2b4, 21, 2 },
> + [PAD_GPIO37] = { 0x2b4, 18, 2 },
> + [PAD_GPIO38] = { 0x2b4, 15, 2 },
> + [PAD_GPIO39] = { 0x2b0, 11, 2 },
> + [PAD_GPIO40] = { 0x2b0, 20, 2 },
> + [PAD_GPIO41] = { 0x2b0, 23, 2 },
> + [PAD_GPIO42] = { 0x2b0, 26, 2 },
> + [PAD_GPIO43] = { 0x2b0, 29, 2 },
> + [PAD_GPIO44] = { 0x2b4, 0, 2 },
> + [PAD_GPIO45] = { 0x2b4, 3, 2 },
> + [PAD_GPIO46] = { 0x2b4, 6, 2 },
> + [PAD_GPIO47] = { 0x2b4, 9, 2 },
> + [PAD_GPIO48] = { 0x2b4, 12, 2 },
> + [PAD_GPIO49] = { 0x2b0, 14, 2 },
> + [PAD_GPIO50] = { 0x2b0, 17, 2 },
> +};
> +
> +static void jh7110_set_function(struct starfive_pinctrl *sfp,
> + unsigned int pin, u32 func)
> +{
> + const struct jh7110_func_sel *fs = &jh7110_sys_func_sel[pin];
> + unsigned long flags;
> + void __iomem *reg;
> + u32 mask;
> +
> + if (!fs->offset)
> + return;
> +
> + if (func > fs->max)
> + return;
> +
> + reg = sfp->base + fs->offset;
> + func = func << fs->shift;
> + mask = 0x3U << fs->shift;
> +
> + raw_spin_lock_irqsave(&sfp->lock, flags);
> + func |= readl_relaxed(reg) & ~mask;
> + writel_relaxed(func, reg);
> + raw_spin_unlock_irqrestore(&sfp->lock, flags);
> +}
> +
> +static void jh7110_set_vin_group(struct starfive_pinctrl *sfp,
> + unsigned int pin)
> +{
> + const struct jh7110_vin_group_sel *gs = &jh7110_sys_vin_group_sel[pin];
> + unsigned long flags;
> + void __iomem *reg;
> + u32 mask;
> + u32 grp;
> +
> + if (!gs->offset)
> + return;
> +
> + reg = sfp->base + gs->offset;
> + grp = gs->group << gs->shift;
> + mask = 0x3U << gs->shift;
> +
> + raw_spin_lock_irqsave(&sfp->lock, flags);
> + grp |= readl_relaxed(reg) & ~mask;
> + writel_relaxed(grp, reg);
> + raw_spin_unlock_irqrestore(&sfp->lock, flags);
> +}
> +
> +static int jh7110_sys_set_one_pin_mux(struct starfive_pinctrl *sfp,
> + unsigned int pin,
> + unsigned int din, u32 dout,
> + u32 doen, u32 func)
> +{
> + if (pin < sfp->gc.ngpio && func == 0)
> + starfive_set_gpiomux(sfp, pin, din, dout, doen);
> +
> + jh7110_set_function(sfp, pin, func);
> +
> + if (pin < sfp->gc.ngpio && func == 2)
> + jh7110_set_vin_group(sfp, pin);
> +
> + return 0;
> +}
> +
> +static int jh7110_sys_get_padcfg_base(struct starfive_pinctrl *sfp,
> + unsigned int pin)
> +{
> + if (pin < PAD_GMAC1_MDC)
> + return SYS_GPO_PDA_0_74_CFG;
> + else if (pin > PAD_GMAC1_TXC && pin <= PAD_QSPI_DATA3)
> + return SYS_GPO_PDA_89_94_CFG;
> + else
> + return -1;
> +}
> +
> +static void jh7110_sys_irq_handler(struct irq_desc *desc)
> +{
> + struct starfive_pinctrl *sfp = starfive_from_irq_desc(desc);
> + struct irq_chip *chip = irq_desc_get_chip(desc);
> + unsigned long mis;
> + unsigned int pin;
> +
> + chained_irq_enter(chip, desc);
> +
> + mis = readl_relaxed(sfp->base + JH7110_SYS_GPIOMIS0);
> + for_each_set_bit(pin, &mis, 32)
> + generic_handle_domain_irq(sfp->gc.irq.domain, pin);
> +
> + mis = readl_relaxed(sfp->base + JH7110_SYS_GPIOMIS1);
> + for_each_set_bit(pin, &mis, 32)
> + generic_handle_domain_irq(sfp->gc.irq.domain, pin + 32);
> +
> + chained_irq_exit(chip, desc);
> +}
> +
> +static int jh7110_sys_init_hw(struct gpio_chip *gc)
> +{
> + struct starfive_pinctrl *sfp = container_of(gc,
> + struct starfive_pinctrl, gc);
> +
> + /* mask all GPIO interrupts */
> + writel(0U, sfp->base + JH7110_SYS_GPIOIE0);
> + writel(0U, sfp->base + JH7110_SYS_GPIOIE1);
> + /* clear edge interrupt flags */
> + writel(~0U, sfp->base + JH7110_SYS_GPIOIC0);
> + writel(~0U, sfp->base + JH7110_SYS_GPIOIC1);
> + /* enable GPIO interrupts */
> + writel(1U, sfp->base + JH7110_SYS_GPIOEN);
> + return 0;
> +}
> +
> +static const struct starfive_gpio_irq_reg jh7110_sys_irq_reg = {
> + .is_reg_base = JH7110_SYS_GPIOIS0,
> + .ic_reg_base = JH7110_SYS_GPIOIC0,
> + .ibe_reg_base = JH7110_SYS_GPIOIBE0,
> + .iev_reg_base = JH7110_SYS_GPIOIEV0,
> + .ie_reg_base = JH7110_SYS_GPIOIE0,
> + .ris_reg_base = JH7110_SYS_GPIORIS0,
> + .mis_reg_base = JH7110_SYS_GPIOMIS0,
> +};
> +
> +static const struct starfive_pinctrl_soc_info jh7110_sys_pinctrl_info = {
> + .pins = jh7110_sys_pins,
> + .npins = ARRAY_SIZE(jh7110_sys_pins),
> + .ngpios = JH7110_SYS_NGPIO,
> + .gc_base = JH7110_SYS_GC_BASE,
> + .flags = 1,
> + .dout_reg_base = JH7110_SYS_DOUT,
> + .dout_mask = GENMASK(6, 0),
> + .doen_reg_base = JH7110_SYS_DOEN,
> + .doen_mask = GENMASK(5, 0),
> + .gpi_reg_base = JH7110_SYS_GPI,
> + .gpi_mask = GENMASK(6, 0),
> + .gpioin_reg_base = JH7110_SYS_GPIOIN,
> + .irq_reg = &jh7110_sys_irq_reg,
> + .starfive_set_one_pin_mux = jh7110_sys_set_one_pin_mux,
> + .starfive_get_padcfg_base = jh7110_sys_get_padcfg_base,
> + .starfive_gpio_irq_handler = jh7110_sys_irq_handler,
> + .starfive_gpio_init_hw = jh7110_sys_init_hw,
> +};
> +
> +static const struct of_device_id jh7110_sys_pinctrl_of_match[] = {
> + {
> + .compatible = "starfive,jh7110-sys-pinctrl",
> + .data = &jh7110_sys_pinctrl_info,
> + },
> + { /* sentinel */ }
> +};
> +
> +static int jh7110_sys_pinctrl_probe(struct platform_device *pdev)
> +{
> + const struct starfive_pinctrl_soc_info *pinctrl_info;
> +
> + pinctrl_info = of_device_get_match_data(&pdev->dev);
> + if (!pinctrl_info)
> + return -ENODEV;
> +
> + return starfive_pinctrl_probe(pdev, pinctrl_info);
> +}
This wrapper is identical to the wrapper in the -aon driver, so you
can get the match data in the common probe function and drop these
wrappers.
> +
> +static struct platform_driver jh7110_sys_pinctrl_driver = {
> + .driver = {
> + .name = "starfive-jh7110-sys-pinctrl",
> + .of_match_table = of_match_ptr(jh7110_sys_pinctrl_of_match),
Please drop the of_match_ptr macro. This driver already depends on CONFIG_OF.
> + },
> + .probe = jh7110_sys_pinctrl_probe,
> +};
> +
> +static int __init jh7110_sys_pinctrl_init(void)
> +{
> + return platform_driver_register(&jh7110_sys_pinctrl_driver);
> +}
> +arch_initcall(jh7110_sys_pinctrl_init);
Why can't this just be module_platform_driver(jh7110_sys_pinctrl_driver); ?
That works for me, so what problems did you run into that means you
need to load this driver earlier?
> +MODULE_DESCRIPTION("Pinctrl driver for the StarFive JH7110 SoC sys controller");
> +MODULE_AUTHOR("Emil Renner Berthing <kernel@...il.dk>");
> +MODULE_AUTHOR("Jianlong Huang <jianlong.huang@...rfivetech.com>");
I still think this driver should be fine as a module, but if not then
these lines should be removed.
> diff --git a/drivers/pinctrl/starfive/pinctrl-starfive.c b/drivers/pinctrl/starfive/pinctrl-starfive.c
> new file mode 100644
> index 000000000000..944caa599460
> --- /dev/null
> +++ b/drivers/pinctrl/starfive/pinctrl-starfive.c
Please call the file pinctrl-starfive-jh7110.c since it only applies
to the JH7110.
> @@ -0,0 +1,972 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Pinctrl / GPIO driver for StarFive JH7110 SoC
> + *
> + * Copyright (C) 2022 Emil Renner Berthing <kernel@...il.dk>
> + * Copyright (C) 2022 StarFive Technology Co., Ltd.
> + */
> +
> +#include <linux/bits.h>
> +#include <linux/clk.h>
> +#include <linux/gpio/driver.h>
> +#include <linux/io.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +#include <linux/spinlock.h>
> +
> +#include <linux/pinctrl/pinctrl.h>
> +#include <linux/pinctrl/pinmux.h>
> +
> +#include <dt-bindings/pinctrl/pinctrl-starfive-jh7110.h>
> +
> +#include "../core.h"
> +#include "../pinctrl-utils.h"
> +#include "../pinmux.h"
> +#include "../pinconf.h"
> +#include "pinctrl-starfive.h"
> +
> +/* pad control bits */
> +#define STARFIVE_PADCFG_POS BIT(7)
> +#define STARFIVE_PADCFG_SMT BIT(6)
> +#define STARFIVE_PADCFG_SLEW BIT(5)
> +#define STARFIVE_PADCFG_PD BIT(4)
> +#define STARFIVE_PADCFG_PU BIT(3)
> +#define STARFIVE_PADCFG_BIAS (STARFIVE_PADCFG_PD | STARFIVE_PADCFG_PU)
> +#define STARFIVE_PADCFG_DS_MASK GENMASK(2, 1)
> +#define STARFIVE_PADCFG_DS_2MA (0U << 1)
> +#define STARFIVE_PADCFG_DS_4MA BIT(1)
> +#define STARFIVE_PADCFG_DS_8MA (2U << 1)
> +#define STARFIVE_PADCFG_DS_12MA (3U << 1)
> +#define STARFIVE_PADCFG_IE BIT(0)
Above you use the JH7110_ prefix for macros, so please be consistent
and use the same prefix here.
> +#define GPIO_NUM_PER_WORD 32
I don't really see the value in this macro, but if you really want it
then it should be named something less generic.
> +/*
> + * The packed pinmux values from the device tree look like this:
> + *
> + * | 31 - 24 | 23 - 16 | 15 - 10 | 9 - 8 | 7 - 0 |
> + * | din | dout | doen | function | pin |
> + */
> +static unsigned int starfive_pinmux_din(u32 v)
> +{
> + return (v & GENMASK(31, 24)) >> 24;
> +}
> +
> +static u32 starfive_pinmux_dout(u32 v)
> +{
> + return (v & GENMASK(23, 16)) >> 16;
> +}
> +
> +static u32 starfive_pinmux_doen(u32 v)
> +{
> + return (v & GENMASK(15, 10)) >> 10;
> +}
> +
> +static u32 starfive_pinmux_function(u32 v)
> +{
> + return (v & GENMASK(9, 8)) >> 8;
> +}
> +
> +static unsigned int starfive_pinmux_pin(u32 v)
> +{
> + return v & GENMASK(7, 0);
> +}
> +
> +static struct starfive_pinctrl *starfive_from_irq_data(struct irq_data *d)
> +{
> + struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
> +
> + return container_of(gc, struct starfive_pinctrl, gc);
> +}
> +
> +struct starfive_pinctrl *starfive_from_irq_desc(struct irq_desc *desc)
> +{
> + struct gpio_chip *gc = irq_desc_get_handler_data(desc);
> +
> + return container_of(gc, struct starfive_pinctrl, gc);
> +}
> +
> +#ifdef CONFIG_DEBUG_FS
> +static void starfive_pin_dbg_show(struct pinctrl_dev *pctldev,
> + struct seq_file *s, unsigned int pin)
> +{
> + struct starfive_pinctrl *sfp = pinctrl_dev_get_drvdata(pctldev);
> + const struct starfive_pinctrl_soc_info *info = sfp->info;
> +
> + seq_printf(s, "%s", dev_name(pctldev->dev));
> +
> + if (pin < sfp->gc.ngpio) {
> + unsigned int offset = 4 * (pin / 4);
> + unsigned int shift = 8 * (pin % 4);
> + u32 dout = readl_relaxed(sfp->base + info->dout_reg_base + offset);
> + u32 doen = readl_relaxed(sfp->base + info->doen_reg_base + offset);
> + u32 gpi = readl_relaxed(sfp->base + info->gpi_reg_base + offset);
> +
> + dout = (dout >> shift) & info->dout_mask;
> + doen = (doen >> shift) & info->doen_mask;
> + gpi = ((gpi >> shift) - 2) & info->gpi_mask;
> +
> + seq_printf(s, " dout=%u doen=%u din=%u", dout, doen, gpi);
> + }
> +}
> +#else
> +#define starfive_pin_dbg_show NULL
> +#endif
> +
> +static int starfive_dt_node_to_map(struct pinctrl_dev *pctldev,
> + struct device_node *np,
> + struct pinctrl_map **maps,
> + unsigned int *num_maps)
> +{
> + struct starfive_pinctrl *sfp = pinctrl_dev_get_drvdata(pctldev);
> + struct device *dev = sfp->gc.parent;
> + struct device_node *child;
> + struct pinctrl_map *map;
> + const char **pgnames;
> + const char *grpname;
> + int ngroups;
> + int nmaps;
> + int ret;
> +
> + ngroups = 0;
> + for_each_child_of_node(np, child)
> + ngroups += 1;
> + nmaps = 2 * ngroups;
> +
> + pgnames = devm_kcalloc(dev, ngroups, sizeof(*pgnames), GFP_KERNEL);
> + if (!pgnames)
> + return -ENOMEM;
> +
> + map = kcalloc(nmaps, sizeof(*map), GFP_KERNEL);
> + if (!map)
> + return -ENOMEM;
> +
> + nmaps = 0;
> + ngroups = 0;
> + mutex_lock(&sfp->mutex);
> + for_each_child_of_node(np, child) {
> + int npins = of_property_count_u32_elems(child, "pinmux");
> + int *pins;
> + u32 *pinmux;
> + int i;
> +
> + if (npins < 1) {
> + dev_err(dev,
> + "invalid pinctrl group %pOFn.%pOFn: pinmux not set\n",
> + np, child);
> + ret = -EINVAL;
> + goto put_child;
> + }
> +
> + grpname = devm_kasprintf(dev, GFP_KERNEL, "%pOFn.%pOFn", np, child);
> + if (!grpname) {
> + ret = -ENOMEM;
> + goto put_child;
> + }
> +
> + pgnames[ngroups++] = grpname;
> +
> + pins = devm_kcalloc(dev, npins, sizeof(*pins), GFP_KERNEL);
> + if (!pins) {
> + ret = -ENOMEM;
> + goto put_child;
> + }
> +
> + pinmux = devm_kcalloc(dev, npins, sizeof(*pinmux), GFP_KERNEL);
> + if (!pinmux) {
> + ret = -ENOMEM;
> + goto put_child;
> + }
> +
> + ret = of_property_read_u32_array(child, "pinmux", pinmux, npins);
> + if (ret)
> + goto put_child;
> +
> + for (i = 0; i < npins; i++)
> + pins[i] = starfive_pinmux_pin(pinmux[i]);
> +
> + map[nmaps].type = PIN_MAP_TYPE_MUX_GROUP;
> + map[nmaps].data.mux.function = np->name;
> + map[nmaps].data.mux.group = grpname;
> + nmaps += 1;
> +
> + ret = pinctrl_generic_add_group(pctldev, grpname,
> + pins, npins, pinmux);
> + if (ret < 0) {
> + dev_err(dev, "error adding group %s: %d\n", grpname, ret);
> + goto put_child;
> + }
> +
> + ret = pinconf_generic_parse_dt_config(child, pctldev,
> + &map[nmaps].data.configs.configs,
> + &map[nmaps].data.configs.num_configs);
> + if (ret) {
> + dev_err(dev, "error parsing pin config of group %s: %d\n",
> + grpname, ret);
> + goto put_child;
> + }
> +
> + /* don't create a map if there are no pinconf settings */
> + if (map[nmaps].data.configs.num_configs == 0)
> + continue;
> +
> + map[nmaps].type = PIN_MAP_TYPE_CONFIGS_GROUP;
> + map[nmaps].data.configs.group_or_pin = grpname;
> + nmaps += 1;
> + }
> +
> + ret = pinmux_generic_add_function(pctldev, np->name,
> + pgnames, ngroups, NULL);
> + if (ret < 0) {
> + dev_err(dev, "error adding function %s: %d\n", np->name, ret);
> + goto free_map;
> + }
> + mutex_unlock(&sfp->mutex);
> +
> + *maps = map;
> + *num_maps = nmaps;
> + return 0;
> +
> +put_child:
> + of_node_put(child);
> +free_map:
> + pinctrl_utils_free_map(pctldev, map, nmaps);
> + mutex_unlock(&sfp->mutex);
> + return ret;
> +}
> +
> +static const struct pinctrl_ops starfive_pinctrl_ops = {
> + .get_groups_count = pinctrl_generic_get_group_count,
> + .get_group_name = pinctrl_generic_get_group_name,
> + .get_group_pins = pinctrl_generic_get_group_pins,
> + .pin_dbg_show = starfive_pin_dbg_show,
> + .dt_node_to_map = starfive_dt_node_to_map,
> + .dt_free_map = pinctrl_utils_free_map,
> +};
Again this file only applies to the JH7110, so please be consistent
and prefix everything jh7110_ and not the generic starfive_ which
gives the impression works on all StarFive SoCs.
> +
> +void starfive_set_gpiomux(struct starfive_pinctrl *sfp, unsigned int pin,
> + unsigned int din, u32 dout, u32 doen)
> +{
> + const struct starfive_pinctrl_soc_info *info = sfp->info;
> +
> + unsigned int offset = 4 * (pin / 4);
> + unsigned int shift = 8 * (pin % 4);
> + u32 dout_mask = info->dout_mask << shift;
> + u32 done_mask = info->doen_mask << shift;
> + u32 ival, imask;
> + void __iomem *reg_dout;
> + void __iomem *reg_doen;
> + void __iomem *reg_din;
> + unsigned long flags;
> +
> + reg_dout = sfp->base + info->dout_reg_base + offset;
> + reg_doen = sfp->base + info->doen_reg_base + offset;
> + dout <<= shift;
> + doen <<= shift;
> + if (din != GPI_NONE) {
> + unsigned int ioffset = 4 * (din / 4);
> + unsigned int ishift = 8 * (din % 4);
> +
> + reg_din = sfp->base + info->gpi_reg_base + ioffset;
> + ival = (pin + 2) << ishift;
> + imask = info->gpi_mask << ishift;
> + } else {
> + reg_din = NULL;
> + }
> +
> + raw_spin_lock_irqsave(&sfp->lock, flags);
> + dout |= readl_relaxed(reg_dout) & ~dout_mask;
> + writel_relaxed(dout, reg_dout);
> + doen |= readl_relaxed(reg_doen) & ~done_mask;
> + writel_relaxed(doen, reg_doen);
> + if (reg_din) {
> + ival |= readl_relaxed(reg_din) & ~imask;
> + writel_relaxed(ival, reg_din);
> + }
> + raw_spin_unlock_irqrestore(&sfp->lock, flags);
> +}
> +
> +static int starfive_set_mux(struct pinctrl_dev *pctldev,
> + unsigned int fsel, unsigned int gsel)
> +{
> + struct starfive_pinctrl *sfp = pinctrl_dev_get_drvdata(pctldev);
> + const struct starfive_pinctrl_soc_info *info = sfp->info;
> + const struct group_desc *group;
> + const u32 *pinmux;
> + unsigned int i;
> +
> + group = pinctrl_generic_get_group(pctldev, gsel);
> + if (!group)
> + return -EINVAL;
> +
> + pinmux = group->data;
> + for (i = 0; i < group->num_pins; i++) {
> + u32 v = pinmux[i];
> +
> + if (info->starfive_set_one_pin_mux)
> + info->starfive_set_one_pin_mux(sfp,
> + starfive_pinmux_pin(v),
> + starfive_pinmux_din(v),
> + starfive_pinmux_dout(v),
> + starfive_pinmux_doen(v),
> + starfive_pinmux_function(v));
> + }
> +
> + return 0;
> +}
> +
> +static const struct pinmux_ops starfive_pinmux_ops = {
> + .get_functions_count = pinmux_generic_get_function_count,
> + .get_function_name = pinmux_generic_get_function_name,
> + .get_function_groups = pinmux_generic_get_function_groups,
> + .set_mux = starfive_set_mux,
> + .strict = true,
> +};
> +
> +static const u8 starfive_drive_strength_mA[4] = { 2, 4, 8, 12 };
> +
> +static u32 starfive_padcfg_ds_to_mA(u32 padcfg)
> +{
> + return starfive_drive_strength_mA[(padcfg >> 1) & 3U];
> +}
> +
> +static u32 starfive_padcfg_ds_from_mA(u32 v)
> +{
> + int i;
> +
> + for (i = 0; i < 3; i++) {
> + if (v <= starfive_drive_strength_mA[i])
> + break;
> + }
> + return i << 1;
> +}
> +
> +static void starfive_padcfg_rmw(struct starfive_pinctrl *sfp,
> + unsigned int pin, u32 mask, u32 value)
> +{
> + const struct starfive_pinctrl_soc_info *info = sfp->info;
> + void __iomem *reg;
> + unsigned long flags;
> + int padcfg_base;
> +
> + if (!info->starfive_get_padcfg_base)
> + return;
> +
> + padcfg_base = info->starfive_get_padcfg_base(sfp, pin);
> + if (padcfg_base < 0)
> + return;
> +
> + reg = sfp->base + padcfg_base + 4 * pin;
> + value &= mask;
> +
> + raw_spin_lock_irqsave(&sfp->lock, flags);
> + value |= readl_relaxed(reg) & ~mask;
> + writel_relaxed(value, reg);
> + raw_spin_unlock_irqrestore(&sfp->lock, flags);
> +}
> +
> +static int starfive_pinconf_get(struct pinctrl_dev *pctldev,
> + unsigned int pin, unsigned long *config)
> +{
> + struct starfive_pinctrl *sfp = pinctrl_dev_get_drvdata(pctldev);
> + const struct starfive_pinctrl_soc_info *info = sfp->info;
> + int param = pinconf_to_config_param(*config);
> + u32 padcfg, arg;
> + bool enabled;
> + int padcfg_base;
> +
> + if (!info->starfive_get_padcfg_base)
> + return 0;
> +
> + padcfg_base = info->starfive_get_padcfg_base(sfp, pin);
> + if (padcfg_base < 0)
> + return 0;
> +
> + padcfg = readl_relaxed(sfp->base + padcfg_base + 4 * pin);
> + switch (param) {
> + case PIN_CONFIG_BIAS_DISABLE:
> + enabled = !(padcfg & STARFIVE_PADCFG_BIAS);
> + arg = 0;
> + break;
> + case PIN_CONFIG_BIAS_PULL_DOWN:
> + enabled = padcfg & STARFIVE_PADCFG_PD;
> + arg = 1;
> + break;
> + case PIN_CONFIG_BIAS_PULL_UP:
> + enabled = padcfg & STARFIVE_PADCFG_PU;
> + arg = 1;
> + break;
> + case PIN_CONFIG_DRIVE_STRENGTH:
> + enabled = true;
> + arg = starfive_padcfg_ds_to_mA(padcfg);
> + break;
> + case PIN_CONFIG_INPUT_ENABLE:
> + enabled = padcfg & STARFIVE_PADCFG_IE;
> + arg = enabled;
> + break;
> + case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
> + enabled = padcfg & STARFIVE_PADCFG_SMT;
> + arg = enabled;
> + break;
> + case PIN_CONFIG_SLEW_RATE:
> + enabled = true;
> + arg = !!(padcfg & STARFIVE_PADCFG_SLEW);
> + break;
> + default:
> + return -ENOTSUPP;
> + }
> +
> + *config = pinconf_to_config_packed(param, arg);
> + return enabled ? 0 : -EINVAL;
> +}
> +
> +static int starfive_pinconf_group_get(struct pinctrl_dev *pctldev,
> + unsigned int gsel,
> + unsigned long *config)
> +{
> + const struct group_desc *group;
> +
> + group = pinctrl_generic_get_group(pctldev, gsel);
> + if (!group)
> + return -EINVAL;
> +
> + return starfive_pinconf_get(pctldev, group->pins[0], config);
> +}
> +
> +static int starfive_pinconf_group_set(struct pinctrl_dev *pctldev,
> + unsigned int gsel,
> + unsigned long *configs,
> + unsigned int num_configs)
> +{
> + struct starfive_pinctrl *sfp = pinctrl_dev_get_drvdata(pctldev);
> + const struct group_desc *group;
> + u16 mask, value;
> + int i;
> +
> + group = pinctrl_generic_get_group(pctldev, gsel);
> + if (!group)
> + return -EINVAL;
> +
> + mask = 0;
> + value = 0;
> + for (i = 0; i < num_configs; i++) {
> + int param = pinconf_to_config_param(configs[i]);
> + u32 arg = pinconf_to_config_argument(configs[i]);
> +
> + switch (param) {
> + case PIN_CONFIG_BIAS_DISABLE:
> + mask |= STARFIVE_PADCFG_BIAS;
> + value &= ~STARFIVE_PADCFG_BIAS;
> + break;
> + case PIN_CONFIG_BIAS_PULL_DOWN:
> + if (arg == 0)
> + return -ENOTSUPP;
> + mask |= STARFIVE_PADCFG_BIAS;
> + value = (value & ~STARFIVE_PADCFG_BIAS) | STARFIVE_PADCFG_PD;
> + break;
> + case PIN_CONFIG_BIAS_PULL_UP:
> + if (arg == 0)
> + return -ENOTSUPP;
> + mask |= STARFIVE_PADCFG_BIAS;
> + value = (value & ~STARFIVE_PADCFG_BIAS) | STARFIVE_PADCFG_PU;
> + break;
> + case PIN_CONFIG_DRIVE_STRENGTH:
> + mask |= STARFIVE_PADCFG_DS_MASK;
> + value = (value & ~STARFIVE_PADCFG_DS_MASK) |
> + starfive_padcfg_ds_from_mA(arg);
> + break;
> + case PIN_CONFIG_INPUT_ENABLE:
> + mask |= STARFIVE_PADCFG_IE;
> + if (arg)
> + value |= STARFIVE_PADCFG_IE;
> + else
> + value &= ~STARFIVE_PADCFG_IE;
> + break;
> + case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
> + mask |= STARFIVE_PADCFG_SMT;
> + if (arg)
> + value |= STARFIVE_PADCFG_SMT;
> + else
> + value &= ~STARFIVE_PADCFG_SMT;
> + break;
> + case PIN_CONFIG_SLEW_RATE:
> + mask |= STARFIVE_PADCFG_SLEW;
> + if (arg)
> + value |= STARFIVE_PADCFG_SLEW;
> + else
> + value &= ~STARFIVE_PADCFG_SLEW;
> + break;
> + default:
> + return -ENOTSUPP;
> + }
> + }
> +
> + for (i = 0; i < group->num_pins; i++)
> + starfive_padcfg_rmw(sfp, group->pins[i], mask, value);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_DEBUG_FS
> +static void starfive_pinconf_dbg_show(struct pinctrl_dev *pctldev,
> + struct seq_file *s, unsigned int pin)
> +{
> + struct starfive_pinctrl *sfp = pinctrl_dev_get_drvdata(pctldev);
> + const struct starfive_pinctrl_soc_info *info = sfp->info;
> + u32 value;
> + int padcfg_base;
> +
> + if (!info->starfive_get_padcfg_base)
> + return;
> +
> + padcfg_base = info->starfive_get_padcfg_base(sfp, pin);
> + if (padcfg_base < 0)
> + return;
> +
> + value = readl_relaxed(sfp->base + padcfg_base + 4 * pin);
> + seq_printf(s, " (0x%02x)", value);
> +}
> +#else
> +#define starfive_pinconf_dbg_show NULL
> +#endif
> +
> +static const struct pinconf_ops starfive_pinconf_ops = {
> + .pin_config_get = starfive_pinconf_get,
> + .pin_config_group_get = starfive_pinconf_group_get,
> + .pin_config_group_set = starfive_pinconf_group_set,
> + .pin_config_dbg_show = starfive_pinconf_dbg_show,
> + .is_generic = true,
> +};
> +
> +static int starfive_gpio_request(struct gpio_chip *gc, unsigned int gpio)
> +{
> + return pinctrl_gpio_request(gc->base + gpio);
> +}
> +
> +static void starfive_gpio_free(struct gpio_chip *gc, unsigned int gpio)
> +{
> + pinctrl_gpio_free(gc->base + gpio);
> +}
> +
> +static int starfive_gpio_get_direction(struct gpio_chip *gc,
> + unsigned int gpio)
> +{
> + struct starfive_pinctrl *sfp = container_of(gc,
> + struct starfive_pinctrl, gc);
> + const struct starfive_pinctrl_soc_info *info = sfp->info;
> + unsigned int offset = 4 * (gpio / 4);
> + unsigned int shift = 8 * (gpio % 4);
> + u32 doen = readl_relaxed(sfp->base + info->doen_reg_base + offset);
> +
> + doen = (doen >> shift) & info->doen_mask;
> +
> + return doen == GPOEN_ENABLE ?
> + GPIO_LINE_DIRECTION_OUT : GPIO_LINE_DIRECTION_IN;
> +}
> +
> +static int starfive_gpio_direction_input(struct gpio_chip *gc,
> + unsigned int gpio)
> +{
> + struct starfive_pinctrl *sfp = container_of(gc,
> + struct starfive_pinctrl, gc);
> + const struct starfive_pinctrl_soc_info *info = sfp->info;
> +
> + /* enable input and schmitt trigger */
> + starfive_padcfg_rmw(sfp, gpio,
> + STARFIVE_PADCFG_IE | STARFIVE_PADCFG_SMT,
> + STARFIVE_PADCFG_IE | STARFIVE_PADCFG_SMT);
> +
> + if (info->starfive_set_one_pin_mux)
> + info->starfive_set_one_pin_mux(sfp, gpio,
> + GPI_NONE, GPOUT_LOW, GPOEN_DISABLE, 0);
> +
> + return 0;
> +}
> +
> +static int starfive_gpio_direction_output(struct gpio_chip *gc,
> + unsigned int gpio, int value)
> +{
> + struct starfive_pinctrl *sfp = container_of(gc,
> + struct starfive_pinctrl, gc);
> + const struct starfive_pinctrl_soc_info *info = sfp->info;
> +
> + if (info->starfive_set_one_pin_mux)
> + info->starfive_set_one_pin_mux(sfp, gpio,
> + GPI_NONE, value ? GPOUT_HIGH : GPOUT_LOW,
> + GPOEN_ENABLE, 0);
> +
> + /* disable input, schmitt trigger and bias */
> + starfive_padcfg_rmw(sfp, gpio,
> + STARFIVE_PADCFG_IE | STARFIVE_PADCFG_SMT
> + | STARFIVE_PADCFG_BIAS, 0);
> + return 0;
> +}
> +
> +static int starfive_gpio_get(struct gpio_chip *gc, unsigned int gpio)
> +{
> + struct starfive_pinctrl *sfp = container_of(gc,
> + struct starfive_pinctrl, gc);
> + const struct starfive_pinctrl_soc_info *info = sfp->info;
> + void __iomem *reg = sfp->base + info->gpioin_reg_base
> + + 4 * (gpio / GPIO_NUM_PER_WORD);
> +
> + return !!(readl_relaxed(reg) & BIT(gpio % GPIO_NUM_PER_WORD));
> +}
> +
> +static void starfive_gpio_set(struct gpio_chip *gc,
> + unsigned int gpio, int value)
> +{
> + struct starfive_pinctrl *sfp = container_of(gc,
> + struct starfive_pinctrl, gc);
> + const struct starfive_pinctrl_soc_info *info = sfp->info;
> + unsigned int offset = 4 * (gpio / 4);
> + unsigned int shift = 8 * (gpio % 4);
> + void __iomem *reg_dout = sfp->base + info->dout_reg_base + offset;
> + u32 dout = (value ? GPOUT_HIGH : GPOUT_LOW) << shift;
> + u32 mask = info->dout_mask << shift;
> + unsigned long flags;
> +
> + raw_spin_lock_irqsave(&sfp->lock, flags);
> + dout |= readl_relaxed(reg_dout) & ~mask;
> + writel_relaxed(dout, reg_dout);
> + raw_spin_unlock_irqrestore(&sfp->lock, flags);
> +}
> +
> +static int starfive_gpio_set_config(struct gpio_chip *gc,
> + unsigned int gpio, unsigned long config)
> +{
> + struct starfive_pinctrl *sfp = container_of(gc,
> + struct starfive_pinctrl, gc);
> + u32 arg = pinconf_to_config_argument(config);
> + u32 value;
> + u32 mask;
> +
> + switch (pinconf_to_config_param(config)) {
> + case PIN_CONFIG_BIAS_DISABLE:
> + mask = STARFIVE_PADCFG_BIAS;
> + value = 0;
> + break;
> + case PIN_CONFIG_BIAS_PULL_DOWN:
> + if (arg == 0)
> + return -ENOTSUPP;
> + mask = STARFIVE_PADCFG_BIAS;
> + value = STARFIVE_PADCFG_PD;
> + break;
> + case PIN_CONFIG_BIAS_PULL_UP:
> + if (arg == 0)
> + return -ENOTSUPP;
> + mask = STARFIVE_PADCFG_BIAS;
> + value = STARFIVE_PADCFG_PU;
> + break;
> + case PIN_CONFIG_DRIVE_PUSH_PULL:
> + return 0;
> + case PIN_CONFIG_INPUT_ENABLE:
> + mask = STARFIVE_PADCFG_IE;
> + value = arg ? STARFIVE_PADCFG_IE : 0;
> + break;
> + case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
> + mask = STARFIVE_PADCFG_SMT;
> + value = arg ? STARFIVE_PADCFG_SMT : 0;
> + break;
> + default:
> + return -ENOTSUPP;
> + }
> +
> + starfive_padcfg_rmw(sfp, gpio, mask, value);
> + return 0;
> +}
> +
> +static int starfive_gpio_add_pin_ranges(struct gpio_chip *gc)
> +{
> + struct starfive_pinctrl *sfp = container_of(gc,
> + struct starfive_pinctrl, gc);
> +
> + sfp->gpios.name = sfp->gc.label;
> + sfp->gpios.base = sfp->gc.base;
> + sfp->gpios.pin_base = 0;
> + sfp->gpios.npins = sfp->gc.ngpio;
> + sfp->gpios.gc = &sfp->gc;
> + pinctrl_add_gpio_range(sfp->pctl, &sfp->gpios);
> + return 0;
> +}
> +
> +static void starfive_irq_ack(struct irq_data *d)
> +{
> + struct starfive_pinctrl *sfp = starfive_from_irq_data(d);
> + const struct starfive_gpio_irq_reg *irq_reg = sfp->info->irq_reg;
> + irq_hw_number_t gpio = irqd_to_hwirq(d);
> + void __iomem *ic = sfp->base + irq_reg->ic_reg_base
> + + 4 * (gpio / GPIO_NUM_PER_WORD);
> + u32 mask = BIT(gpio % GPIO_NUM_PER_WORD);
> + unsigned long flags;
> + u32 value;
> +
> + raw_spin_lock_irqsave(&sfp->lock, flags);
> + value = readl_relaxed(ic) & ~mask;
> + writel_relaxed(value, ic);
> + writel_relaxed(value | mask, ic);
> + raw_spin_unlock_irqrestore(&sfp->lock, flags);
> +}
> +
> +static void starfive_irq_mask(struct irq_data *d)
> +{
> + struct starfive_pinctrl *sfp = starfive_from_irq_data(d);
> + const struct starfive_gpio_irq_reg *irq_reg = sfp->info->irq_reg;
> + irq_hw_number_t gpio = irqd_to_hwirq(d);
> + void __iomem *ie = sfp->base + irq_reg->ie_reg_base
> + + 4 * (gpio / GPIO_NUM_PER_WORD);
> + u32 mask = BIT(gpio % GPIO_NUM_PER_WORD);
> + unsigned long flags;
> + u32 value;
> +
> + raw_spin_lock_irqsave(&sfp->lock, flags);
> + value = readl_relaxed(ie) & ~mask;
> + writel_relaxed(value, ie);
> + raw_spin_unlock_irqrestore(&sfp->lock, flags);
> +
> + gpiochip_disable_irq(&sfp->gc, d->hwirq);
> +}
> +
> +static void starfive_irq_mask_ack(struct irq_data *d)
> +{
> + struct starfive_pinctrl *sfp = starfive_from_irq_data(d);
> + const struct starfive_gpio_irq_reg *irq_reg = sfp->info->irq_reg;
> + irq_hw_number_t gpio = irqd_to_hwirq(d);
> + void __iomem *ie = sfp->base + irq_reg->ie_reg_base
> + + 4 * (gpio / GPIO_NUM_PER_WORD);
> + void __iomem *ic = sfp->base + irq_reg->ic_reg_base
> + + 4 * (gpio / GPIO_NUM_PER_WORD);
> + u32 mask = BIT(gpio % GPIO_NUM_PER_WORD);
> + unsigned long flags;
> + u32 value;
> +
> + raw_spin_lock_irqsave(&sfp->lock, flags);
> + value = readl_relaxed(ie) & ~mask;
> + writel_relaxed(value, ie);
> +
> + value = readl_relaxed(ic) & ~mask;
> + writel_relaxed(value, ic);
> + writel_relaxed(value | mask, ic);
> + raw_spin_unlock_irqrestore(&sfp->lock, flags);
> +}
> +
> +static void starfive_irq_unmask(struct irq_data *d)
> +{
> + struct starfive_pinctrl *sfp = starfive_from_irq_data(d);
> + const struct starfive_gpio_irq_reg *irq_reg = sfp->info->irq_reg;
> + irq_hw_number_t gpio = irqd_to_hwirq(d);
> + void __iomem *ie = sfp->base + irq_reg->ie_reg_base
> + + 4 * (gpio / GPIO_NUM_PER_WORD);
> + u32 mask = BIT(gpio % GPIO_NUM_PER_WORD);
> + unsigned long flags;
> + u32 value;
> +
> + gpiochip_enable_irq(&sfp->gc, d->hwirq);
> +
> + raw_spin_lock_irqsave(&sfp->lock, flags);
> + value = readl_relaxed(ie) | mask;
> + writel_relaxed(value, ie);
> + raw_spin_unlock_irqrestore(&sfp->lock, flags);
> +}
> +
> +static int starfive_irq_set_type(struct irq_data *d, unsigned int trigger)
> +{
> + struct starfive_pinctrl *sfp = starfive_from_irq_data(d);
> + const struct starfive_gpio_irq_reg *irq_reg = sfp->info->irq_reg;
> + irq_hw_number_t gpio = irqd_to_hwirq(d);
> + void __iomem *base = sfp->base + 4 * (gpio / GPIO_NUM_PER_WORD);
> + u32 mask = BIT(gpio % GPIO_NUM_PER_WORD);
> + u32 irq_type, edge_both, polarity;
> + unsigned long flags;
> +
> + switch (trigger) {
> + case IRQ_TYPE_EDGE_RISING:
> + irq_type = mask; /* 1: edge triggered */
> + edge_both = 0; /* 0: single edge */
> + polarity = mask; /* 1: rising edge */
> + break;
> + case IRQ_TYPE_EDGE_FALLING:
> + irq_type = mask; /* 1: edge triggered */
> + edge_both = 0; /* 0: single edge */
> + polarity = 0; /* 0: falling edge */
> + break;
> + case IRQ_TYPE_EDGE_BOTH:
> + irq_type = mask; /* 1: edge triggered */
> + edge_both = mask; /* 1: both edges */
> + polarity = 0; /* 0: ignored */
> + break;
> + case IRQ_TYPE_LEVEL_HIGH:
> + irq_type = 0; /* 0: level triggered */
> + edge_both = 0; /* 0: ignored */
> + polarity = mask; /* 1: high level */
> + break;
> + case IRQ_TYPE_LEVEL_LOW:
> + irq_type = 0; /* 0: level triggered */
> + edge_both = 0; /* 0: ignored */
> + polarity = 0; /* 0: low level */
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + if (trigger & IRQ_TYPE_EDGE_BOTH)
> + irq_set_handler_locked(d, handle_edge_irq);
> + else
> + irq_set_handler_locked(d, handle_level_irq);
> +
> + raw_spin_lock_irqsave(&sfp->lock, flags);
> + irq_type |= readl_relaxed(base + irq_reg->is_reg_base) & ~mask;
> + writel_relaxed(irq_type, base + irq_reg->is_reg_base);
> +
> + edge_both |= readl_relaxed(base + irq_reg->ibe_reg_base) & ~mask;
> + writel_relaxed(edge_both, base + irq_reg->ibe_reg_base);
> +
> + polarity |= readl_relaxed(base + irq_reg->iev_reg_base) & ~mask;
> + writel_relaxed(polarity, base + irq_reg->iev_reg_base);
> + raw_spin_unlock_irqrestore(&sfp->lock, flags);
> + return 0;
> +}
> +
> +static struct irq_chip starfive_irq_chip = {
> + .irq_ack = starfive_irq_ack,
> + .irq_mask = starfive_irq_mask,
> + .irq_mask_ack = starfive_irq_mask_ack,
> + .irq_unmask = starfive_irq_unmask,
> + .irq_set_type = starfive_irq_set_type,
> + .flags = IRQCHIP_IMMUTABLE | IRQCHIP_SET_TYPE_MASKED,
> + GPIOCHIP_IRQ_RESOURCE_HELPERS,
> +};
> +
> +static void starfive_disable_clock(void *data)
> +{
> + clk_disable_unprepare(data);
> +}
> +
> +int starfive_pinctrl_probe(struct platform_device *pdev,
> + const struct starfive_pinctrl_soc_info *info)
> +{
> + struct device *dev = &pdev->dev;
> + struct starfive_pinctrl *sfp;
> + struct pinctrl_desc *starfive_pinctrl_desc;
> + struct reset_control *rst;
> + struct clk *clk;
> + int ret;
> +
> + if (!info || !info->pins || !info->npins) {
> + dev_err(dev, "wrong pinctrl info\n");
> + return -EINVAL;
> + }
> +
> + sfp = devm_kzalloc(dev, sizeof(*sfp), GFP_KERNEL);
> + if (!sfp)
> + return -ENOMEM;
> +
> + sfp->base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(sfp->base))
> + return PTR_ERR(sfp->base);
> +
> + clk = devm_clk_get_optional(dev, NULL);
> + if (IS_ERR(clk))
> + return dev_err_probe(dev, PTR_ERR(clk), "could not get clock\n");
> +
> + rst = devm_reset_control_get_exclusive(dev, NULL);
> + if (IS_ERR(rst))
> + return dev_err_probe(dev, PTR_ERR(rst), "could not get reset\n");
> +
> + /*
> + * we don't want to assert reset and risk undoing pin muxing for the
> + * early boot serial console, but let's make sure the reset line is
> + * deasserted in case someone runs a really minimal bootloader.
> + */
> + ret = reset_control_deassert(rst);
> + if (ret)
> + return dev_err_probe(dev, ret, "could not deassert reset\n");
> +
> + if (clk) {
> + ret = clk_prepare_enable(clk);
> + if (ret)
> + return dev_err_probe(dev, ret, "could not enable clock\n");
> +
> + ret = devm_add_action_or_reset(dev, starfive_disable_clock, clk);
> + if (ret)
> + return ret;
> + }
> +
> + starfive_pinctrl_desc = devm_kzalloc(&pdev->dev,
> + sizeof(*starfive_pinctrl_desc),
> + GFP_KERNEL);
> + if (!starfive_pinctrl_desc)
> + return -ENOMEM;
> +
> + starfive_pinctrl_desc->name = dev_name(dev);
> + starfive_pinctrl_desc->pins = info->pins;
> + starfive_pinctrl_desc->npins = info->npins;
> + starfive_pinctrl_desc->pctlops = &starfive_pinctrl_ops;
> + starfive_pinctrl_desc->pmxops = &starfive_pinmux_ops;
> + starfive_pinctrl_desc->confops = &starfive_pinconf_ops;
> + starfive_pinctrl_desc->owner = THIS_MODULE;
> +
> + sfp->info = info;
> + sfp->dev = dev;
> + platform_set_drvdata(pdev, sfp);
> + sfp->gc.parent = dev;
> + raw_spin_lock_init(&sfp->lock);
> + mutex_init(&sfp->mutex);
> +
> + ret = devm_pinctrl_register_and_init(dev,
> + starfive_pinctrl_desc,
> + sfp, &sfp->pctl);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "could not register pinctrl driver\n");
> +
> + sfp->gc.label = dev_name(dev);
> + sfp->gc.owner = THIS_MODULE;
> + sfp->gc.request = starfive_gpio_request;
> + sfp->gc.free = starfive_gpio_free;
> + sfp->gc.get_direction = starfive_gpio_get_direction;
> + sfp->gc.direction_input = starfive_gpio_direction_input;
> + sfp->gc.direction_output = starfive_gpio_direction_output;
> + sfp->gc.get = starfive_gpio_get;
> + sfp->gc.set = starfive_gpio_set;
> + sfp->gc.set_config = starfive_gpio_set_config;
> + sfp->gc.add_pin_ranges = starfive_gpio_add_pin_ranges;
> + sfp->gc.base = info->gc_base;
> + sfp->gc.ngpio = info->ngpios;
> +
> + starfive_irq_chip.name = sfp->gc.label;
> + gpio_irq_chip_set_chip(&sfp->gc.irq, &starfive_irq_chip);
> + sfp->gc.irq.parent_handler = info->starfive_gpio_irq_handler;
> + sfp->gc.irq.num_parents = 1;
> + sfp->gc.irq.parents = devm_kcalloc(dev, sfp->gc.irq.num_parents,
> + sizeof(*sfp->gc.irq.parents),
> + GFP_KERNEL);
> + if (!sfp->gc.irq.parents)
> + return -ENOMEM;
> + sfp->gc.irq.default_type = IRQ_TYPE_NONE;
> + sfp->gc.irq.handler = handle_bad_irq;
> + sfp->gc.irq.init_hw = info->starfive_gpio_init_hw;
> +
> + ret = platform_get_irq(pdev, 0);
> + if (ret < 0)
> + return ret;
> + sfp->gc.irq.parents[0] = ret;
> +
> + ret = devm_gpiochip_add_data(dev, &sfp->gc, sfp);
> + if (ret)
> + return dev_err_probe(dev, ret, "could not register gpiochip\n");
> +
> + irq_domain_set_pm_device(sfp->gc.irq.domain, dev);
> +
> + dev_info(dev, "StarFive GPIO chip registered %d GPIOs\n", sfp->gc.ngpio);
> +
> + return pinctrl_enable(sfp->pctl);
> +}
> +
> +MODULE_DESCRIPTION("Pinctrl driver for the StarFive JH7110 SoC");
> +MODULE_AUTHOR("Emil Renner Berthing <kernel@...il.dk>");
> +MODULE_AUTHOR("Jianlong Huang <jianlong.huang@...rfivetech.com>");
> diff --git a/drivers/pinctrl/starfive/pinctrl-starfive.h b/drivers/pinctrl/starfive/pinctrl-starfive.h
> new file mode 100644
> index 000000000000..54ffdb6412f1
> --- /dev/null
> +++ b/drivers/pinctrl/starfive/pinctrl-starfive.h
> @@ -0,0 +1,72 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Pinctrl / GPIO driver for StarFive JH7110 SoC
> + *
> + * Copyright (C) 2022 StarFive Technology Co., Ltd.
> + */
> +
> +#ifndef __DRIVERS_PINCTRL_STARFIVE_H__
> +#define __DRIVERS_PINCTRL_STARFIVE_H__
> +
> +#include <linux/pinctrl/pinconf-generic.h>
> +#include <linux/pinctrl/pinmux.h>
> +
> +struct starfive_pinctrl {
> + struct device *dev;
> + struct gpio_chip gc;
> + struct pinctrl_gpio_range gpios;
> + raw_spinlock_t lock;
> + void __iomem *base;
> + struct pinctrl_dev *pctl;
> + /* register read/write mutex */
> + struct mutex mutex;
> + const struct starfive_pinctrl_soc_info *info;
> +};
> +
> +struct starfive_gpio_irq_reg {
> + unsigned int is_reg_base;
> + unsigned int ic_reg_base;
> + unsigned int ibe_reg_base;
> + unsigned int iev_reg_base;
> + unsigned int ie_reg_base;
> + unsigned int ris_reg_base;
> + unsigned int mis_reg_base;
> +};
> +
> +struct starfive_pinctrl_soc_info {
> + const struct pinctrl_pin_desc *pins;
> + unsigned int npins;
> + unsigned int ngpios;
> + unsigned int gc_base;
> + unsigned int flags;
The flag member seems unused. Please drop.
> + /* gpio dout/doen/din/gpioinput register */
> + unsigned int dout_reg_base;
> + unsigned int dout_mask;
> + unsigned int doen_reg_base;
> + unsigned int doen_mask;
> + unsigned int gpi_reg_base;
> + unsigned int gpi_mask;
> + unsigned int gpioin_reg_base;
> +
> + const struct starfive_gpio_irq_reg *irq_reg;
> +
> + /* generic pinmux */
> + int (*starfive_set_one_pin_mux)(struct starfive_pinctrl *sfp,
> + unsigned int pin,
> + unsigned int din, u32 dout,
> + u32 doen, u32 func);
> + /* gpio chip */
> + int (*starfive_get_padcfg_base)(struct starfive_pinctrl *sfp,
> + unsigned int pin);
> + void (*starfive_gpio_irq_handler)(struct irq_desc *desc);
> + int (*starfive_gpio_init_hw)(struct gpio_chip *gc);
> +};
> +
> +void starfive_set_gpiomux(struct starfive_pinctrl *sfp, unsigned int pin,
> + unsigned int din, u32 dout, u32 doen);
> +int starfive_pinctrl_probe(struct platform_device *pdev,
> + const struct starfive_pinctrl_soc_info *info);
> +struct starfive_pinctrl *starfive_from_irq_desc(struct irq_desc *desc);
> +
> +#endif /* __DRIVERS_PINCTRL_STARFIVE_H__ */
> --
> 2.38.1
>
Powered by blists - more mailing lists