[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <f2aaf9bd-e65b-08c7-5eae-7fac59324791@kernel.org>
Date: Thu, 8 Dec 2022 12:22:17 +0200
From: Roger Quadros <rogerq@...nel.org>
To: MD Danish Anwar <danishanwar@...com>,
Mathieu Poirier <mathieu.poirier@...aro.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Rob Herring <robh+dt@...nel.org>
Cc: Suman Anna <s-anna@...com>, "Andrew F . Davis" <afd@...com>,
nm@...com, vigneshr@...com, srk@...com,
linux-remoteproc@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v11 2/6] remoteproc: pru: Add enum for PRU Core
Identifiers.
On 07/12/2022 13:04, MD Danish Anwar wrote:
> Introducing enum pruss_pru_id for PRU Core Identifiers.
> PRUSS_PRU0 indicates PRU Core 0.
> PRUSS_PRU1 indicates PRU Core 1.
> PRUSS_NUM_PRUS indicates the total number of PRU Cores.
>
> Signed-off-by: MD Danish Anwar <danishanwar@...com>
Reviewed-by: Roger Quadros <rogerq@...nel.org>
--
cheers,
-roger
> ---
> drivers/remoteproc/pru_rproc.c | 7 ++++---
> include/linux/pruss.h | 32 ++++++++++++++++++++++++++++++++
> 2 files changed, 36 insertions(+), 3 deletions(-)
> create mode 100644 include/linux/pruss.h
>
> diff --git a/drivers/remoteproc/pru_rproc.c b/drivers/remoteproc/pru_rproc.c
> index 128bf9912f2c..a1a208b31846 100644
> --- a/drivers/remoteproc/pru_rproc.c
> +++ b/drivers/remoteproc/pru_rproc.c
> @@ -16,6 +16,7 @@
> #include <linux/module.h>
> #include <linux/of_device.h>
> #include <linux/of_irq.h>
> +#include <linux/pruss.h>
> #include <linux/pruss_driver.h>
> #include <linux/remoteproc.h>
>
> @@ -438,7 +439,7 @@ static void *pru_d_da_to_va(struct pru_rproc *pru, u32 da, size_t len)
> dram0 = pruss->mem_regions[PRUSS_MEM_DRAM0];
> dram1 = pruss->mem_regions[PRUSS_MEM_DRAM1];
> /* PRU1 has its local RAM addresses reversed */
> - if (pru->id == 1)
> + if (pru->id == PRUSS_PRU1)
> swap(dram0, dram1);
> shrd_ram = pruss->mem_regions[PRUSS_MEM_SHRD_RAM2];
>
> @@ -747,14 +748,14 @@ static int pru_rproc_set_id(struct pru_rproc *pru)
> case RTU0_IRAM_ADDR_MASK:
> fallthrough;
> case PRU0_IRAM_ADDR_MASK:
> - pru->id = 0;
> + pru->id = PRUSS_PRU0;
> break;
> case TX_PRU1_IRAM_ADDR_MASK:
> fallthrough;
> case RTU1_IRAM_ADDR_MASK:
> fallthrough;
> case PRU1_IRAM_ADDR_MASK:
> - pru->id = 1;
> + pru->id = PRUSS_PRU1;
> break;
> default:
> ret = -EINVAL;
> diff --git a/include/linux/pruss.h b/include/linux/pruss.h
> new file mode 100644
> index 000000000000..fbe4fbb45807
> --- /dev/null
> +++ b/include/linux/pruss.h
> @@ -0,0 +1,32 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/**
> + * PRU-ICSS Subsystem user interfaces
> + *
> + * Copyright (C) 2015-2022 Texas Instruments Incorporated - http://www.ti.com
> + * Suman Anna <s-anna@...com>
> + */
> +
> +#ifndef __LINUX_PRUSS_H
> +#define __LINUX_PRUSS_H
> +
> +#include <linux/device.h>
> +#include <linux/types.h>
> +
> +#define PRU_RPROC_DRVNAME "pru-rproc"
> +
> +/**
> + * enum pruss_pru_id - PRU core identifiers
> + * @PRUSS_PRU0: PRU Core 0.
> + * @PRUSS_PRU1: PRU Core 1.
> + * @PRUSS_NUM_PRUS: Total number of PRU Cores available.
> + *
> + */
> +
> +enum pruss_pru_id {
> + PRUSS_PRU0 = 0,
> + PRUSS_PRU1,
> + PRUSS_NUM_PRUS,
> +};
> +
> +
> +#endif /* __LINUX_PRUSS_H */
> \ No newline at end of file
Powered by blists - more mailing lists