| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221209220450.1793421-1-marijn.suijten@somainline.org>
Date: Fri, 9 Dec 2022 23:04:49 +0100
From: Marijn Suijten <marijn.suijten@...ainline.org>
To: phone-devel@...r.kernel.org
Cc: ~postmarketos/upstreaming@...ts.sr.ht,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...ainline.org>,
Konrad Dybcio <konrad.dybcio@...ainline.org>,
Martin Botka <martin.botka@...ainline.org>,
Jami Kettunen <jami.kettunen@...ainline.org>,
Marijn Suijten <marijn.suijten@...ainline.org>,
Luca Weiss <luca@...tu.xyz>, Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [RFC PATCH] arm64: dts: qcom: Use plural _gpios node label for PMIC gpios
The gpio node in PMIC dts'es define access to multiple GPIOs. Most Qcom
PMICs were already using the plural _gpios label to point to this node,
but a few PMICs were left behind including the recently-pulled
pm(i)8950.
Rename it from *_gpio to *_gpios for pm6125, pm6150(l), pm8005,
pm(i)8950, and pm(i)8998.
Signed-off-by: Marijn Suijten <marijn.suijten@...ainline.org>
---
This was brought up for discussion in [1] but hasn't seen any relevant
reply, unfortunately.
[1]: https://lore.kernel.org/linux-arm-msm/20221104234435.xwjpwfxs73puvfca@SoMainline.org/
---
arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts | 8 ++++----
.../dts/qcom/msm8998-oneplus-cheeseburger.dts | 4 ++--
.../boot/dts/qcom/msm8998-oneplus-common.dtsi | 6 +++---
.../qcom/msm8998-sony-xperia-yoshino-maple.dts | 4 ++--
.../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 16 ++++++++--------
.../arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts | 4 ++--
arch/arm64/boot/dts/qcom/pm6125.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/pm6150.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/pm6150l.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/pm8005.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/pm8950.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/pm8998.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/pmi8950.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/pmi8998.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/sc7180-idp.dts | 4 ++--
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 16 ++++++++--------
arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi | 4 ++--
.../boot/dts/qcom/sdm845-oneplus-common.dtsi | 6 +++---
.../arm64/boot/dts/qcom/sdm845-shift-axolotl.dts | 4 ++--
.../boot/dts/qcom/sdm845-sony-xperia-tama.dtsi | 2 +-
.../dts/qcom/sdm845-xiaomi-beryllium-common.dtsi | 4 ++--
.../boot/dts/qcom/sdm845-xiaomi-polaris.dts | 4 ++--
.../dts/qcom/sm6125-sony-xperia-seine-pdx201.dts | 2 +-
25 files changed, 64 insertions(+), 64 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
index 310f7a2df1e8..0e273938b59d 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
@@ -113,7 +113,7 @@ gpio-keys {
<&cam_snapshot_pin_a>;
button-vol-up {
label = "Volume Up";
- gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+ gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
linux,code = <KEY_VOLUMEUP>;
gpio-key,wakeup;
@@ -122,7 +122,7 @@ button-vol-up {
button-camera-snapshot {
label = "Camera Snapshot";
- gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>;
+ gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
linux,code = <KEY_CAMERA>;
debounce-interval = <15>;
@@ -130,7 +130,7 @@ button-camera-snapshot {
button-camera-focus {
label = "Camera Focus";
- gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>;
+ gpios = <&pm8998_gpios 8 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
linux,code = <KEY_CAMERA_FOCUS>;
debounce-interval = <15>;
@@ -338,7 +338,7 @@ pm8005_s1: s1 { /* VDD_GFX supply */
};
};
-&pm8998_gpio {
+&pm8998_gpios {
vol_up_pin_a: vol-up-active-state {
pins = "gpio6";
function = "normal";
diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts
index 9fb1fb9b8529..d36b36af49d0 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts
@@ -23,7 +23,7 @@ leds {
pinctrl-0 = <&button_backlight_default>;
led-keypad-backlight {
- gpios = <&pmi8998_gpio 5 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmi8998_gpios 5 GPIO_ACTIVE_HIGH>;
color = <LED_COLOR_ID_WHITE>;
function = LED_FUNCTION_KBD_BACKLIGHT;
default-state = "off";
@@ -31,7 +31,7 @@ led-keypad-backlight {
};
};
-&pmi8998_gpio {
+&pmi8998_gpios {
button_backlight_default: button-backlight-state {
pins = "gpio5";
function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
index 7d4a67d07501..ce03c7c239e5 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
@@ -92,7 +92,7 @@ gpio-keys {
button-vol-down {
label = "Volume down";
- gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>;
+ gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
debounce-interval = <15>;
wakeup-source;
@@ -100,7 +100,7 @@ button-vol-down {
button-vol-up {
label = "Volume up";
- gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+ gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
debounce-interval = <15>;
wakeup-source;
@@ -269,7 +269,7 @@ pm8005_s1: s1 {
};
};
-&pm8998_gpio {
+&pm8998_gpios {
vol_keys_default: vol-keys-state {
pins = "gpio5", "gpio6";
function = "normal";
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts
index 20fe0394a3c1..1868ad649415 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts
@@ -20,7 +20,7 @@ disp_dvdd_vreg: disp-dvdd-vreg {
regulator-max-microvolt = <1350000>;
startup-delay-us = <0>;
enable-active-high;
- gpio = <&pmi8998_gpio 10 GPIO_ACTIVE_HIGH>;
+ gpio = <&pmi8998_gpios 10 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&disp_dvdd_en>;
};
@@ -37,7 +37,7 @@ &lab {
qcom,soft-start-us = <200>;
};
-&pmi8998_gpio {
+&pmi8998_gpios {
disp_dvdd_en: disp-dvdd-en-active-state {
pins = "gpio10";
function = "normal";
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
index 5da87baa2b23..1f64b70260fe 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
@@ -25,7 +25,7 @@ div1_mclk: divclk1 {
pinctrl-names = "default";
clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
#clock-cells = <0>;
- enable-gpios = <&pm8998_gpio 13 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&pm8998_gpios 13 GPIO_ACTIVE_HIGH>;
};
};
@@ -65,7 +65,7 @@ cam_vio_vreg: cam-vio-vreg {
regulator-name = "cam_vio_vreg";
startup-delay-us = <0>;
enable-active-high;
- gpio = <&pmi8998_gpio 1 GPIO_ACTIVE_HIGH>;
+ gpio = <&pmi8998_gpios 1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&cam_vio_default>;
vin-supply = <&vreg_lvs1a_1p8>;
@@ -103,7 +103,7 @@ gpio-keys {
<&cam_snapshot_pin_a>;
button-vol-down {
label = "Volume Down";
- gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>;
+ gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
linux,code = <KEY_VOLUMEDOWN>;
gpio-key,wakeup;
@@ -112,7 +112,7 @@ button-vol-down {
button-camera-snapshot {
label = "Camera Snapshot";
- gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>;
+ gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
linux,code = <KEY_CAMERA>;
debounce-interval = <15>;
@@ -120,7 +120,7 @@ button-camera-snapshot {
button-camera-focus {
label = "Camera Focus";
- gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>;
+ gpios = <&pm8998_gpios 8 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
linux,code = <KEY_CAMERA_FOCUS>;
debounce-interval = <15>;
@@ -187,7 +187,7 @@ ramoops@...00000 {
vibrator {
compatible = "gpio-vibrator";
- enable-gpios = <&pmi8998_gpio 5 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&pmi8998_gpios 5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vib_default>;
};
@@ -303,7 +303,7 @@ pm8005_s1: s1 {
};
};
-&pm8998_gpio {
+&pm8998_gpios {
vol_down_pin_a: vol-down-active-state {
pins = "gpio5";
function = PMIC_GPIO_FUNC_NORMAL;
@@ -335,7 +335,7 @@ audio_mclk_pin: audio-mclk-pin-active-state {
};
};
-&pmi8998_gpio {
+&pmi8998_gpios {
cam_vio_default: cam-vio-active-state {
pins = "gpio1";
function = PMIC_GPIO_FUNC_NORMAL;
diff --git a/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts b/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts
index b1aac7311ef9..7956b151c7a4 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts
@@ -133,7 +133,7 @@ gpio-keys {
key-vol-up {
label = "Volume up";
- gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+ gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
debounce-interval = <15>;
wakeup-source;
@@ -278,7 +278,7 @@ pm8005_s1: s1 { /* VDD_GFX supply */
};
};
-&pm8998_gpio {
+&pm8998_gpios {
vol_up_key_default: vol-up-key-default-state {
pins = "gpio6";
function = "normal";
diff --git a/arch/arm64/boot/dts/qcom/pm6125.dtsi b/arch/arm64/boot/dts/qcom/pm6125.dtsi
index 1c8ccda26ffb..59092a551a16 100644
--- a/arch/arm64/boot/dts/qcom/pm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm6125.dtsi
@@ -136,11 +136,11 @@ pm6125_rtc: rtc@...0 {
status = "disabled";
};
- pm6125_gpio: gpio@...0 {
+ pm6125_gpios: gpio@...0 {
compatible = "qcom,pm6125-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
- gpio-ranges = <&pm6125_gpio 0 0 9>;
+ gpio-ranges = <&pm6125_gpios 0 0 9>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi
index 3d91fb405ca2..2e6afa296141 100644
--- a/arch/arm64/boot/dts/qcom/pm6150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi
@@ -88,11 +88,11 @@ pm6150_adc_tm: adc-tm@...0 {
status = "disabled";
};
- pm6150_gpio: gpio@...0 {
+ pm6150_gpios: gpio@...0 {
compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
- gpio-ranges = <&pm6150_gpio 0 0 10>;
+ gpio-ranges = <&pm6150_gpios 0 0 10>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
index 90aac61ad264..2479625ed08a 100644
--- a/arch/arm64/boot/dts/qcom/pm6150l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
@@ -95,11 +95,11 @@ pm6150l_adc_tm: adc-tm@...0 {
status = "disabled";
};
- pm6150l_gpio: gpio@...0 {
+ pm6150l_gpios: gpio@...0 {
compatible = "qcom,pm6150l-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
- gpio-ranges = <&pm6150l_gpio 0 0 12>;
+ gpio-ranges = <&pm6150l_gpios 0 0 12>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pm8005.dtsi b/arch/arm64/boot/dts/qcom/pm8005.dtsi
index 8d4b081b4e9d..0f0ab2da8305 100644
--- a/arch/arm64/boot/dts/qcom/pm8005.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8005.dtsi
@@ -11,11 +11,11 @@ pm8005_lsid0: pmic@4 {
#address-cells = <1>;
#size-cells = <0>;
- pm8005_gpio: gpio@...0 {
+ pm8005_gpios: gpio@...0 {
compatible = "qcom,pm8005-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
- gpio-ranges = <&pm8005_gpio 0 0 4>;
+ gpio-ranges = <&pm8005_gpios 0 0 4>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pm8950.dtsi b/arch/arm64/boot/dts/qcom/pm8950.dtsi
index 07c3896bd36f..631761f98999 100644
--- a/arch/arm64/boot/dts/qcom/pm8950.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8950.dtsi
@@ -141,11 +141,11 @@ pm8950_mpps: mpps@...0 {
#interrupt-cells = <2>;
};
- pm8950_gpio: gpio@...0 {
+ pm8950_gpios: gpio@...0 {
compatible = "qcom,pm8950-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
- gpio-ranges = <&pm8950_gpio 0 0 8>;
+ gpio-ranges = <&pm8950_gpios 0 0 8>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi
index 6a5854333b2b..adbba9f4089a 100644
--- a/arch/arm64/boot/dts/qcom/pm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi
@@ -109,11 +109,11 @@ rtc@...0 {
interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
};
- pm8998_gpio: gpio@...0 {
+ pm8998_gpios: gpio@...0 {
compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
- gpio-ranges = <&pm8998_gpio 0 0 26>;
+ gpio-ranges = <&pm8998_gpios 0 0 26>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pmi8950.dtsi b/arch/arm64/boot/dts/qcom/pmi8950.dtsi
index 8008f02434a9..4891be3cd68a 100644
--- a/arch/arm64/boot/dts/qcom/pmi8950.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8950.dtsi
@@ -67,11 +67,11 @@ pmi8950_mpps: mpps@...0 {
#interrupt-cells = <2>;
};
- pmi8950_gpio: gpio@...0 {
+ pmi8950_gpios: gpio@...0 {
compatible = "qcom,pmi8950-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
- gpio-ranges = <&pmi8950_gpio 0 0 2>;
+ gpio-ranges = <&pmi8950_gpios 0 0 2>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
index cd1caeae8281..ffe587f281d8 100644
--- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
@@ -9,11 +9,11 @@ pmi8998_lsid0: pmic@2 {
#address-cells = <1>;
#size-cells = <0>;
- pmi8998_gpio: gpio@...0 {
+ pmi8998_gpios: gpio@...0 {
compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
- gpio-ranges = <&pmi8998_gpio 0 0 14>;
+ gpio-ranges = <&pmi8998_gpios 0 0 14>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index 70fd9ff8dfa2..7c2ff02eb869 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -304,7 +304,7 @@ panel@0 {
pinctrl-names = "default";
pinctrl-0 = <&disp_pins>;
- reset-gpios = <&pm6150l_gpio 3 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&pm6150l_gpios 3 GPIO_ACTIVE_HIGH>;
ports {
#address-cells = <1>;
@@ -467,7 +467,7 @@ wifi-firmware {
/* PINCTRL - additions to nodes defined in sc7180.dtsi */
-&pm6150l_gpio {
+&pm6150l_gpios {
disp_pins: disp-state {
pinconf {
pins = "gpio3";
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index f1defb94d670..b82956f8f1cf 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -1141,11 +1141,11 @@ &sec_mi2s_active {
/* PINCTRL - board-specific pinctrl */
-&pm6150_gpio {
+&pm6150_gpios {
status = "disabled"; /* No GPIOs are connected */
};
-&pm6150l_gpio {
+&pm6150l_gpios {
gpio-line-names = "AP_SUSPEND",
"",
"",
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
index ca676e04687b..ab9bf5282910 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -1096,7 +1096,7 @@ pinconf-rx {
};
/* PINCTRL - board-specific pinctrl */
-&pm8005_gpio {
+&pm8005_gpios {
gpio-line-names = "",
"",
"SLB",
@@ -1130,7 +1130,7 @@ adc-chan@51 {
};
};
-&pm8998_gpio {
+&pm8998_gpios {
gpio-line-names = "",
"",
"SW_CTRL",
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index f41c6d600ea8..7c3efe3cbf5b 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -54,7 +54,7 @@ gpio-keys {
key-vol-up {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
- gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+ gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
};
};
@@ -65,7 +65,7 @@ led-0 {
label = "green:user4";
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_GREEN>;
- gpios = <&pm8998_gpio 13 GPIO_ACTIVE_HIGH>;
+ gpios = <&pm8998_gpios 13 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "panic-indicator";
default-state = "off";
};
@@ -74,7 +74,7 @@ led-1 {
label = "yellow:wlan";
function = LED_FUNCTION_WLAN;
color = <LED_COLOR_ID_YELLOW>;
- gpios = <&pm8998_gpio 9 GPIO_ACTIVE_HIGH>;
+ gpios = <&pm8998_gpios 9 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tx";
default-state = "off";
};
@@ -83,7 +83,7 @@ led-2 {
label = "blue:bt";
function = LED_FUNCTION_BLUETOOTH;
color = <LED_COLOR_ID_BLUE>;
- gpios = <&pm8998_gpio 5 GPIO_ACTIVE_HIGH>;
+ gpios = <&pm8998_gpios 5 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "bluetooth-power";
default-state = "off";
};
@@ -148,7 +148,7 @@ cam0_dvdd_1v2: reg_cam0_dvdd_1v2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
enable-active-high;
- gpio = <&pm8998_gpio 12 GPIO_ACTIVE_HIGH>;
+ gpio = <&pm8998_gpios 12 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&cam0_dvdd_1v2_en_default>;
vin-supply = <&vbat>;
@@ -160,7 +160,7 @@ cam0_avdd_2v8: reg_cam0_avdd_2v8 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
enable-active-high;
- gpio = <&pm8998_gpio 10 GPIO_ACTIVE_HIGH>;
+ gpio = <&pm8998_gpios 10 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&cam0_avdd_2v8_en_default>;
vin-supply = <&vbat>;
@@ -559,7 +559,7 @@ &pcie1_phy {
vdda-pll-supply = <&vreg_l26a_1p2>;
};
-&pm8998_gpio {
+&pm8998_gpios {
gpio-line-names =
"NC",
"NC",
@@ -1170,7 +1170,7 @@ pinconf-rx {
};
};
-&pm8998_gpio {
+&pm8998_gpios {
};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
index 1eb423e4be24..f54d3302fb8a 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
@@ -132,7 +132,7 @@ gpio-keys {
key-vol-up {
label = "Volume up";
linux,code = <KEY_VOLUMEUP>;
- gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+ gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
};
};
@@ -603,7 +603,7 @@ pinconf {
};
};
-&pm8998_gpio {
+&pm8998_gpios {
vol_up_pin_a: vol-up-active-state {
pins = "gpio6";
function = "normal";
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index 42cf4dd5ea28..f5751f3244cb 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -37,14 +37,14 @@ gpio-keys {
key-vol-down {
label = "Volume down";
linux,code = <KEY_VOLUMEDOWN>;
- gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>;
+ gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
debounce-interval = <15>;
};
key-vol-up {
label = "Volume up";
linux,code = <KEY_VOLUMEUP>;
- gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+ gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
debounce-interval = <15>;
};
};
@@ -440,7 +440,7 @@ &mss_pil {
firmware-name = "qcom/sdm845/oneplus6/mba.mbn", "qcom/sdm845/oneplus6/modem.mbn";
};
-&pm8998_gpio {
+&pm8998_gpios {
volume_down_gpio: pm8998-gpio5-state {
pinconf {
pins = "gpio5";
diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
index bb77ccfdc68c..1934662c2bde 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
@@ -54,7 +54,7 @@ gpio-keys {
key-vol-up {
label = "volume_up";
linux,code = <KEY_VOLUMEUP>;
- gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+ gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
debounce-interval = <15>;
};
};
@@ -510,7 +510,7 @@ &mss_pil {
firmware-name = "qcom/sdm845/axolotl/mba.mbn", "qcom/sdm845/axolotl/modem.mbn";
};
-&pm8998_gpio {
+&pm8998_gpios {
volume_up_gpio: pm8998-gpio6-state {
pinconf {
pins = "gpio6";
diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
index 87dd0fc36747..df92e8d7bf30 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
@@ -21,7 +21,7 @@ gpio-keys {
key-vol-down {
label = "volume_down";
- gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>;
+ gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
debounce-interval = <15>;
gpio-key,wakeup;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
index eb6b2b676eca..ba5a37cb3c9e 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
@@ -46,7 +46,7 @@ gpio-keys {
key-vol-up {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
- gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+ gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
};
};
@@ -304,7 +304,7 @@ &ipa {
firmware-name = "qcom/sdm845/beryllium/ipa_fws.mbn";
};
-&pm8998_gpio {
+&pm8998_gpios {
vol_up_pin_a: vol-up-active-state {
pins = "gpio6";
function = "normal";
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
index 38ba809a95cd..46346f7146ed 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
@@ -55,7 +55,7 @@ gpio-keys {
key-vol-up {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
- gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+ gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
debounce-interval = <15>;
};
};
@@ -518,7 +518,7 @@ &pmi8998_wled {
status = "okay";
};
-&pm8998_gpio {
+&pm8998_gpios {
volume_up_gpio: pm8998-gpio6-state {
pinconf {
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
index 0de6c5b7f742..650819c028b6 100644
--- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
+++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
@@ -217,7 +217,7 @@ rf-pa1-therm@3 {
};
};
-&pm6125_gpio {
+&pm6125_gpios {
camera_flash_therm: camera-flash-therm-state {
pins = "gpio3";
function = PMIC_GPIO_FUNC_NORMAL;
--
2.38.1
Powered by blists - more mailing lists