[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ed2f5df6-66c4-26b4-b650-48a128760965@starfivetech.com>
Date: Fri, 9 Dec 2022 09:19:48 +0800
From: yanhong wang <yanhong.wang@...rfivetech.com>
To: Conor Dooley <conor@...nel.org>
CC: <linux-riscv@...ts.infradead.org>, <netdev@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
"David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
"Jakub Kicinski" <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Emil Renner Berthing <kernel@...il.dk>,
Richard Cochran <richardcochran@...il.com>,
Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Peter Geis <pgwipeout@...il.com>
Subject: Re: [PATCH v1 7/7] riscv: dts: starfive: visionfive-v2: Add phy
delay_chain configuration
On 2022/12/2 1:49, Conor Dooley wrote:
> On Thu, Dec 01, 2022 at 05:02:42PM +0800, Yanhong Wang wrote:
>> Add phy delay_chain configuration to support motorcomm phy driver for
>> StarFive VisionFive 2 board.
>>
>> Signed-off-by: Yanhong Wang <yanhong.wang@...rfivetech.com>
>> ---
>> .../jh7110-starfive-visionfive-v2.dts | 46 +++++++++++++++++++
>> 1 file changed, 46 insertions(+)
>>
>> diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-v2.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-v2.dts
>> index c8946cf3a268..2868ef4c74ef 100644
>> --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-v2.dts
>> +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-v2.dts
>> @@ -15,6 +15,8 @@
>>
>> aliases {
>> serial0 = &uart0;
>> + ethernet0=&gmac0;
>> + ethernet1=&gmac1;
>
> Please match the whitespace usage of the existing entry.
>
Will fix in the next version.
>> };
>>
>> chosen {
>> @@ -114,3 +116,47 @@
>> pinctrl-0 = <&uart0_pins>;
>> status = "okay";
>> };
>> +
>> +&gmac0 {
>> + status = "okay";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + phy-handle = <&phy0>;
>> + status = "okay";
>> + mdio0 {
>
> A line of whitespace before the child nodes too please :)
>
Will fix.
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + compatible = "snps,dwmac-mdio";
>> + phy0: ethernet-phy@0 {
>> + reg = <0>;
>> + rxc_dly_en = <1>;
>> + tx_delay_sel_fe = <5>;
>> + tx_delay_sel = <0xa>;
>> + tx_inverted_10 = <0x1>;
>> + tx_inverted_100 = <0x1>;
>> + tx_inverted_1000 = <0x1>;
>> + };
>> + };
>> +};
>> +
>> +&gmac1 {
>> + status = "okay";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + phy-handle = <&phy1>;
>> + status = "okay";
>> + mdio1 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + compatible = "snps,dwmac-mdio";
>> + phy1: ethernet-phy@1 {
>> + reg = <1>;
>> + tx_delay_sel_fe = <5>;
>> + tx_delay_sel = <0>;
>> + rxc_dly_en = <0>;
>> + tx_inverted_10 = <0x1>;
>> + tx_inverted_100 = <0x1>;
>> + tx_inverted_1000 = <0x0>;
>> + };
>> + };
>> +};
>> --
>> 2.17.1
>>
Powered by blists - more mailing lists