| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 10 Dec 2022 12:57:02 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 2/4] arm64: dts: qcom: sdm845: move DSI/QUP/QSPI opp tables out of SoC node
The SoC node is a simple-bus and its schema expect to have nodes only
with unit addresses:
sdm850-lenovo-yoga-c630.dtb: soc@0: opp-table-qup: {'compatible': ['operating-points-v2'], 'phandle': [[60]], 'opp-50000000':
... 'required-opps': [[55]]}} should not be valid under {'type': 'object'}
Move to top-level OPP tables:
- DSI and QUP which are shared between multiple nodes,
- QSPI which cannot be placed in its node due to address/size cells.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 154 +++++++++++++--------------
1 file changed, 77 insertions(+), 77 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index a63dbd12230f..573b2394e63f 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -696,6 +696,83 @@ cpu4_opp32: opp-2803200000 {
};
};
+ dsi_opp_table: opp-table-dsi {
+ compatible = "operating-points-v2";
+
+ opp-19200000 {
+ opp-hz = /bits/ 64 <19200000>;
+ required-opps = <&rpmhpd_opp_min_svs>;
+ };
+
+ opp-180000000 {
+ opp-hz = /bits/ 64 <180000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-275000000 {
+ opp-hz = /bits/ 64 <275000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-328580000 {
+ opp-hz = /bits/ 64 <328580000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+
+ qspi_opp_table: opp-table-qspi {
+ compatible = "operating-points-v2";
+
+ opp-19200000 {
+ opp-hz = /bits/ 64 <19200000>;
+ required-opps = <&rpmhpd_opp_min_svs>;
+ };
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-150000000 {
+ opp-hz = /bits/ 64 <150000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+
+ qup_opp_table: opp-table-qup {
+ compatible = "operating-points-v2";
+
+ opp-50000000 {
+ opp-hz = /bits/ 64 <50000000>;
+ required-opps = <&rpmhpd_opp_min_svs>;
+ };
+
+ opp-75000000 {
+ opp-hz = /bits/ 64 <75000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-128000000 {
+ opp-hz = /bits/ 64 <128000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
@@ -1125,30 +1202,6 @@ rng: rng@...000 {
clock-names = "core";
};
- qup_opp_table: opp-table-qup {
- compatible = "operating-points-v2";
-
- opp-50000000 {
- opp-hz = /bits/ 64 <50000000>;
- required-opps = <&rpmhpd_opp_min_svs>;
- };
-
- opp-75000000 {
- opp-hz = /bits/ 64 <75000000>;
- required-opps = <&rpmhpd_opp_low_svs>;
- };
-
- opp-100000000 {
- opp-hz = /bits/ 64 <100000000>;
- required-opps = <&rpmhpd_opp_svs>;
- };
-
- opp-128000000 {
- opp-hz = /bits/ 64 <128000000>;
- required-opps = <&rpmhpd_opp_nom>;
- };
- };
-
gpi_dma0: dma-controller@...000 {
#dma-cells = <3>;
compatible = "qcom,sdm845-gpi-dma";
@@ -3807,30 +3860,6 @@ opp-201500000 {
};
};
- qspi_opp_table: opp-table-qspi {
- compatible = "operating-points-v2";
-
- opp-19200000 {
- opp-hz = /bits/ 64 <19200000>;
- required-opps = <&rpmhpd_opp_min_svs>;
- };
-
- opp-100000000 {
- opp-hz = /bits/ 64 <100000000>;
- required-opps = <&rpmhpd_opp_low_svs>;
- };
-
- opp-150000000 {
- opp-hz = /bits/ 64 <150000000>;
- required-opps = <&rpmhpd_opp_svs>;
- };
-
- opp-300000000 {
- opp-hz = /bits/ 64 <300000000>;
- required-opps = <&rpmhpd_opp_nom>;
- };
- };
-
qspi: spi@...f000 {
compatible = "qcom,sdm845-qspi", "qcom,qspi-v1";
reg = <0 0x088df000 0 0x600>;
@@ -4428,35 +4457,6 @@ clock_camcc: clock-controller@...0000 {
clock-names = "bi_tcxo";
};
- dsi_opp_table: opp-table-dsi {
- compatible = "operating-points-v2";
-
- opp-19200000 {
- opp-hz = /bits/ 64 <19200000>;
- required-opps = <&rpmhpd_opp_min_svs>;
- };
-
- opp-180000000 {
- opp-hz = /bits/ 64 <180000000>;
- required-opps = <&rpmhpd_opp_low_svs>;
- };
-
- opp-275000000 {
- opp-hz = /bits/ 64 <275000000>;
- required-opps = <&rpmhpd_opp_svs>;
- };
-
- opp-328580000 {
- opp-hz = /bits/ 64 <328580000>;
- required-opps = <&rpmhpd_opp_svs_l1>;
- };
-
- opp-358000000 {
- opp-hz = /bits/ 64 <358000000>;
- required-opps = <&rpmhpd_opp_nom>;
- };
- };
-
mdss: mdss@...0000 {
compatible = "qcom,sdm845-mdss";
reg = <0 0x0ae00000 0 0x1000>;
--
2.34.1
Powered by blists - more mailing lists