| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAJZ5v0j2FvdkxHQqHErV0i7sMyxAnW7gnQwe5s195xLU1aa15A@mail.gmail.com>
Date: Tue, 13 Dec 2022 20:56:21 +0100
From: "Rafael J. Wysocki" <rafael@...nel.org>
To: Daniel Lezcano <daniel.lezcano@...aro.org>
Cc: "Rafael J. Wysocki" <rafael@...nel.org>,
Luca Weiss <luca@...tu.xyz>,
Neil Armstrong <neil.armstrong@...aro.org>,
Marcus Folkesson <marcus.folkesson@...il.com>,
Rob Herring <robh+dt@...nel.org>, Keerthy <j-keerthy@...com>,
Ido Schimmel <idosch@...lanox.com>,
Robert Marko <robimarko@...il.com>,
Christian Marangi <ansuelsmth@...il.com>,
Marek Vasut <marex@...x.de>,
Daniel Golle <daniel@...rotopia.org>,
Johan Hovold <johan@...nel.org>,
Alexander Stein <alexander.stein@...tq-group.com>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Linux PM mailing list <linux-pm@...r.kernel.org>
Subject: Re: [GIT PULL] thermal drivers for v6.2-rc1
On Fri, Dec 9, 2022 at 6:08 PM Daniel Lezcano <daniel.lezcano@...aro.org> wrote:
>
> The following changes since commit 7d4b19ab6b89903fde8ad02f28a8943a4734e7b0:
>
> Merge Intel thermal control drivers changes for v6.2 (2022-12-02
> 19:39:07 +0100)
>
> are available in the Git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git
> tags/thermal-v6.2-rc1
>
> for you to fetch changes up to f3ce48d06440a712de3c5ef1d26003c1e77afd74:
>
> Revert "thermal/sysfs: Remove unnecessary check in
> trip_point_hyst_show()" (2022-12-09 16:23:16 +0100)
>
> ----------------------------------------------------------------
> - Rework a large bunch of drivers to use the generic thermal trip
> structure and the opportunity to do more cleanups by removing unused
> functions in the OF code (Daniel Lezcano)
>
> - Add the sm8450 QCom compatible string in the DT bindings (Luca
> Weiss)
>
> - Use devm_platform_get_and_ioremap_resource on the ST platform to
> group two calls into a single one (Minghao Chi)
>
> - Add the sm8550 QCom compatible string in the DT bindings (Neil
> Armstrong)
>
> - Use GENMASK instead of bitmaps and validate the temperature after
> reading it (Marcus Folkesson)
>
> - Convert generic-adc-thermal to DT schema (Rob Herring)
>
> - Fix the debug print message where the logic is inverted (Keerthy)
>
> - Fix NULL pointer dereference when getting the critical temp (Daniel
> Lezcano)
>
> - Fix memory leak on thermal_of_zone_register() failure (Ido Schimmel)
>
> - Add support for IPQ8074 in the tsens driver along with the DT
> bindings (Robert Marko)
>
> - Fix and rework the debugfs code in the tsens driver (Christian
> Marangi)
>
> - Add calibration and DT documentation for the imx8mm driver (Marek
> Vasut)
>
> - Add DT bindings and compatible for the Mediatek SoCs mt7981 and
> mt7983 (Daniel Golle)
>
> - Don't show an error message if it happens at probe time while it
> will be deferred on the QCom SPMI ADC driver (Johan Hovold)
>
> - Add the HWMon support on the imx8mm board (Alexander Stein)
>
> - Remove a pointless include in the power allocator governor
> (Christophe JAILLET)
>
> - Add interrupt DT bindings for QCom SoCs SC8280XP, SM6350 and SM8450
> (Krzysztof Kozlowski)
>
> - Fix inaccurate warning message for the QCom tsens gen2 (Luca Weiss)
>
> - Demote error log of thermal zone register to debug on the tsens QCom
> driver (Manivannan Sadhasivam)
>
> - Consolidate the TI Bandgap driver regarding how is handled the efuse
> values and the errata handling (Bryan Brattlof)
>
> - Document the Renesas RZ/Five as compatible with RZ/G2UL in the DT
> bindings (Lad Prabhakar)
>
> - Fix the irq handler return value in the LMh driver (Bjorn Andersson)
>
> ----------------------------------------------------------------
> Alexander Stein (1):
> thermal/drivers/imx8mm: Add hwmon support
>
> Bjorn Andersson (1):
> thermal/drivers/qcom/lmh: Fix irq handler return value
>
> Bryan Brattlof (6):
> thermal/drivers/k3_j72xx_bandgap: Simplify k3_thermal_get_temp()
> function
> thermal/drivers/k3_j72xx_bandgap: Use bool for i2128 erratum flag
> thermal/drivers/k3_j72xx_bandgap: Remove fuse_base from structure
> thermal/drivers/k3_j72xx_bandgap: Map fuse_base only for erratum
> workaround
> dt-bindings: thermal: k3-j72xx: elaborate on binding description
> dt-bindings: thermal: k3-j72xx: conditionally require efuse reg range
>
> Christian Marangi (3):
> thermal/drivers/qcom/tsens: Init debugfs only with successful probe
> thermal/drivers/qcom/tsens: Fix wrong version id dbg_version_show
> thermal/drivers/qcom/tsens: Rework debugfs file structure
>
> Christophe JAILLET (1):
> thermal/core/power allocator: Remove a useless include
>
> Dan Carpenter (1):
> thermal/sysfs: remove unnecessary check in trip_point_hyst_show()
>
> Daniel Golle (1):
> dt-bindings: thermal: mediatek: add compatible string for MT7986
> and MT7981 SoC
>
> Daniel Lezcano (33):
> thermal/core: Add a generic thermal_zone_get_trip() function
> thermal/sysfs: Always expose hysteresis attributes
> thermal/core: Add a generic thermal_zone_set_trip() function
> thermal/core/governors: Use thermal_zone_get_trip() instead of
> ops functions
> thermal/of: Use generic thermal_zone_get_trip() function
> thermal/of: Remove unused functions
> thermal/drivers/exynos: Use generic thermal_zone_get_trip() function
> thermal/drivers/exynos: of_thermal_get_ntrips()
> thermal/drivers/exynos: Replace of_thermal_is_trip_valid() by
> thermal_zone_get_trip()
> thermal/drivers/tegra: Use generic thermal_zone_get_trip() function
> thermal/drivers/uniphier: Use generic thermal_zone_get_trip()
> function
> thermal/drivers/hisi: Use generic thermal_zone_get_trip() function
> thermal/drivers/qcom: Use generic thermal_zone_get_trip() function
> thermal/drivers/armada: Use generic thermal_zone_get_trip() function
> thermal/drivers/rcar_gen3: Use the generic function to get the
> number of trips
> thermal/of: Remove of_thermal_get_ntrips()
> thermal/of: Remove of_thermal_is_trip_valid()
> thermal/of: Remove of_thermal_set_trip_hyst()
> thermal/of: Remove of_thermal_get_crit_temp()
> thermal/drivers/st: Use generic trip points
> thermal/drivers/imx: Use generic thermal_zone_get_trip() function
> thermal/drivers/rcar: Use generic thermal_zone_get_trip() function
> thermal/drivers/broadcom: Use generic thermal_zone_get_trip()
> function
> thermal/drivers/da9062: Use generic thermal_zone_get_trip() function
> thermal/drivers/ti: Remove unused macros
> ti_thermal_get_trip_value() / ti_thermal_trip_is_valid()
> thermal/drivers/acerhdf: Use generic thermal_zone_get_trip() function
> thermal/drivers/cxgb4: Use generic thermal_zone_get_trip() function
> thermal/intel/int340x: Replace parameter to simplify
> thermal/drivers/intel: Use generic thermal_zone_get_trip() function
> thermal/drivers/exynos: Fix NULL pointer dereference when getting
> the critical temp
> wifi: iwlwifi: Use generic thermal_zone_get_trip() function
> thermal/drivers/mellanox: Use generic thermal_zone_get_trip()
> function
> Revert "thermal/sysfs: Remove unnecessary check in
> trip_point_hyst_show()"
>
> Geert Uytterhoeven (1):
> thermal: ti-soc-thermal: Drop comma after SoC match table sentinel
>
> Ido Schimmel (1):
> thermal/of: Fix memory leak on thermal_of_zone_register() failure
>
> Johan Hovold (1):
> thermal: qcom-spmi-adc-tm5: suppress probe-deferral error message
>
> Jon Hunter (1):
> thermal/drivers/tegra: Fix crash when getting critical temp
>
> Keerthy (1):
> thermal/drivers/k3_j72xx_bandgap: Fix the debug print message
>
> Krzysztof Kozlowski (1):
> dt-bindings: thermal: qcom-tsens: narrow interrupts for SC8280XP,
> SM6350 and SM8450
>
> Lad Prabhakar (1):
> dt-bindings: thermal: rzg2l-thermal: Document RZ/Five SoC
>
> Luca Weiss (2):
> dt-bindings: thermal: tsens: Add sm8450 compatible
> thermal/drivers/qcom/temp-alarm: Fix inaccurate warning for gen2
>
> Manivannan Sadhasivam (1):
> thermal/drivers/qcom: Demote error log of thermal zone register
> to debug
>
> Marcus Folkesson (2):
> thermal/drivers/imx8mm_thermal: Use GENMASK() when appropriate
> thermal/drivers/imx8mm_thermal: Validate temperature range
>
> Marek Vasut (2):
> dt-bindings: thermal: imx8mm-thermal: Document optional nvmem-cells
> thermal/drivers/imx: Add support for loading calibration data
> from OCOTP
>
> Minghao Chi (1):
> thermal/drivers/st: Use devm_platform_get_and_ioremap_resource()
>
> Neil Armstrong (1):
> dt-bindings: thermal: qcom-tsens: Add compatible for sm8550
>
> Rob Herring (1):
> dt-bindings: thermal: Convert generic-adc-thermal to DT schema
>
> Robert Marko (4):
> dt-bindings: thermal: tsens: Add ipq8074 compatible
> thermal/drivers/tsens: Add support for combined interrupt
> thermal/drivers/tsens: Allow configuring min and max trips
> thermal/drivers/tsens: Add IPQ8074 support
>
> .../bindings/thermal/generic-adc-thermal.yaml | 84 +++++++++
> .../bindings/thermal/imx8mm-thermal.yaml | 7 +
> .../bindings/thermal/mediatek-thermal.txt | 2 +
> .../devicetree/bindings/thermal/qcom-tsens.yaml | 81 ++++++--
> .../devicetree/bindings/thermal/rzg2l-thermal.yaml | 2 +-
> .../bindings/thermal/thermal-generic-adc.txt | 95 ----------
> .../bindings/thermal/ti,j72xx-thermal.yaml | 35 +++-
> drivers/net/ethernet/chelsio/cxgb4/cxgb4.h | 2 -
> drivers/net/ethernet/chelsio/cxgb4/cxgb4_thermal.c | 39 +---
> drivers/net/ethernet/mellanox/mlxsw/core_thermal.c | 209
> +++++----------------
> drivers/net/wireless/intel/iwlwifi/mvm/mvm.h | 2 +-
> drivers/net/wireless/intel/iwlwifi/mvm/tt.c | 71 ++-----
> drivers/platform/x86/acerhdf.c | 73 +++----
> drivers/thermal/armada_thermal.c | 37 ++--
> drivers/thermal/broadcom/bcm2835_thermal.c | 8 +-
> drivers/thermal/da9062-thermal.c | 52 +----
> drivers/thermal/gov_bang_bang.c | 37 ++--
> drivers/thermal/gov_fair_share.c | 18 +-
> drivers/thermal/gov_power_allocator.c | 52 +++--
> drivers/thermal/gov_step_wise.c | 22 +--
> drivers/thermal/hisi_thermal.c | 11 +-
> drivers/thermal/imx8mm_thermal.c | 180
> +++++++++++++++++-
> drivers/thermal/imx_thermal.c | 72 +++----
> .../intel/int340x_thermal/int340x_thermal_zone.c | 33 ++--
> .../intel/int340x_thermal/int340x_thermal_zone.h | 4 +-
> .../int340x_thermal/processor_thermal_device.c | 10 +-
> drivers/thermal/intel/x86_pkg_temp_thermal.c | 120 ++++++------
> drivers/thermal/k3_j72xx_bandgap.c | 67 +++----
> drivers/thermal/qcom/lmh.c | 2 +-
> drivers/thermal/qcom/qcom-spmi-adc-tm5.c | 8 +-
> drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 42 ++---
> drivers/thermal/qcom/tsens-8960.c | 3 +
> drivers/thermal/qcom/tsens-v0_1.c | 3 +
> drivers/thermal/qcom/tsens-v1.c | 3 +
> drivers/thermal/qcom/tsens-v2.c | 20 ++
> drivers/thermal/qcom/tsens.c | 68 ++++---
> drivers/thermal/qcom/tsens.h | 8 +-
> drivers/thermal/rcar_gen3_thermal.c | 2 +-
> drivers/thermal/rcar_thermal.c | 53 +-----
> drivers/thermal/samsung/exynos_tmu.c | 62 +++---
> drivers/thermal/st/st_thermal.c | 47 +----
> drivers/thermal/st/stm_thermal.c | 4 +-
> drivers/thermal/tegra/soctherm.c | 35 ++--
> drivers/thermal/tegra/tegra30-tsensor.c | 17 +-
> drivers/thermal/thermal_core.c | 153 ++++++++++++---
> drivers/thermal/thermal_core.h | 24 +--
> drivers/thermal/thermal_helpers.c | 28 +--
> drivers/thermal/thermal_netlink.c | 19 +-
> drivers/thermal/thermal_of.c | 124 +-----------
> drivers/thermal/thermal_sysfs.c | 135 +++++--------
> drivers/thermal/ti-soc-thermal/ti-bandgap.c | 2 +-
> drivers/thermal/ti-soc-thermal/ti-thermal.h | 15 --
> drivers/thermal/uniphier_thermal.c | 27 ++-
> include/linux/thermal.h | 10 +
> 54 files changed, 1115 insertions(+), 1224 deletions(-)
> create mode 100644
> Documentation/devicetree/bindings/thermal/generic-adc-thermal.yaml
> delete mode 100644
> Documentation/devicetree/bindings/thermal/thermal-generic-adc.txt
Pulled and added to my linux-next branch, thanks!
Powered by blists - more mailing lists