| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 13 Dec 2022 16:46:46 +0800
From: Victor Shih <victorshihgli@...il.com>
To: Adrian Hunter <adrian.hunter@...el.com>
Cc: ulf.hansson@...aro.org, linux-mmc@...r.kernel.org,
linux-kernel@...r.kernel.org, benchuanggli@...il.com,
HL.Liu@...esyslogic.com.tw, Greg.tu@...esyslogic.com.tw,
takahiro.akashi@...aro.org, dlunev@...omium.org,
Victor Shih <victor.shih@...esyslogic.com.tw>,
Ben Chuang <ben.chuang@...esyslogic.com.tw>
Subject: Re: [PATCH V5 15/26] mmc: sdhci-uhs2: add set_ios()
Hi, Adrian
On Wed, Nov 2, 2022 at 1:15 AM Adrian Hunter <adrian.hunter@...el.com> wrote:
>
> On 19/10/22 14:06, Victor Shih wrote:
> > This is a sdhci version of mmc's set_ios operation.
> > It covers both UHS-I and UHS-II.
> >
> > Signed-off-by: Ben Chuang <ben.chuang@...esyslogic.com.tw>
> > Signed-off-by: AKASHI Takahiro <takahiro.akashi@...aro.org>
> > Signed-off-by: Victor Shih <victor.shih@...esyslogic.com.tw>
> > ---
> > drivers/mmc/host/sdhci-uhs2.c | 102 ++++++++++++++++++++++++++++++++++
> > drivers/mmc/host/sdhci-uhs2.h | 1 +
> > drivers/mmc/host/sdhci.c | 40 ++++++++-----
> > drivers/mmc/host/sdhci.h | 2 +
> > 4 files changed, 130 insertions(+), 15 deletions(-)
> >
> > diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c
> > index 2b90e5308764..b535a47dc55a 100644
> > --- a/drivers/mmc/host/sdhci-uhs2.c
> > +++ b/drivers/mmc/host/sdhci-uhs2.c
> > @@ -281,6 +281,74 @@ void sdhci_uhs2_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
> > }
> > EXPORT_SYMBOL_GPL(sdhci_uhs2_set_timeout);
> >
> > +/**
> > + * sdhci_uhs2_clear_set_irqs - set Error Interrupt Status Enable register
> > + * @host: SDHCI host
> > + * @clear: bit-wise clear mask
> > + * @set: bit-wise set mask
> > + *
> > + * Set/unset bits in UHS-II Error Interrupt Status Enable register
> > + */
> > +void sdhci_uhs2_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set)
> > +{
> > + u32 ier;
> > +
> > + ier = sdhci_readl(host, SDHCI_UHS2_ERR_INT_STATUS_EN);
> > + ier &= ~clear;
> > + ier |= set;
> > + sdhci_writel(host, ier, SDHCI_UHS2_ERR_INT_STATUS_EN);
> > + sdhci_writel(host, ier, SDHCI_UHS2_ERR_INT_SIG_EN);
> > +}
> > +EXPORT_SYMBOL_GPL(sdhci_uhs2_clear_set_irqs);
> > +
> > +static void __sdhci_uhs2_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> > +{
> > + struct sdhci_host *host = mmc_priv(mmc);
> > + u8 cmd_res, dead_lock;
> > + u16 ctrl_2;
> > + unsigned long flags;
> > +
> > + /* FIXME: why lock? */
> > + spin_lock_irqsave(&host->lock, flags);
>
> ->uhs2_set_ios() should not be racing with anything, so the lock
> should not be needed. Please remove for now.
>
I will update it in the patch#14 of the new [PATCH V6].
> > +
> > + /* UHS2 Timeout Control */
> > + sdhci_calc_timeout_uhs2(host, &cmd_res, &dead_lock);
> > +
> > + /* change to use calculate value */
> > + cmd_res |= dead_lock << SDHCI_UHS2_TIMER_CTRL_DEADLOCK_SHIFT;
> > +
> > + sdhci_uhs2_clear_set_irqs(host,
> > + SDHCI_UHS2_ERR_INT_STATUS_RES_TIMEOUT |
> > + SDHCI_UHS2_ERR_INT_STATUS_DEADLOCK_TIMEOUT,
> > + 0);
> > + sdhci_writeb(host, cmd_res, SDHCI_UHS2_TIMER_CTRL);
> > + sdhci_uhs2_clear_set_irqs(host, 0,
> > + SDHCI_UHS2_ERR_INT_STATUS_RES_TIMEOUT |
> > + SDHCI_UHS2_ERR_INT_STATUS_DEADLOCK_TIMEOUT);
> > +
> > + /* UHS2 timing */
> > + ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
> > + if (ios->timing == MMC_TIMING_SD_UHS2)
> > + ctrl_2 |= SDHCI_CTRL_UHS_2 | SDHCI_CTRL_UHS2_INTERFACE_EN;
> > + else
> > + ctrl_2 &= ~(SDHCI_CTRL_UHS_2 | SDHCI_CTRL_UHS2_INTERFACE_EN);
> > + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
> > +
> > + if (!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN))
> > + sdhci_enable_preset_value(host, true);
> > +
> > + if (host->ops->set_power)
> > + host->ops->set_power(host, ios->power_mode, ios->vdd);
> > + else
> > + sdhci_uhs2_set_power(host, ios->power_mode, ios->vdd);
> > + udelay(100);
> > +
> > + host->timing = ios->timing;
> > + sdhci_set_clock(host, host->clock);
> > +
> > + spin_unlock_irqrestore(&host->lock, flags);
> > +}
> > +
> > /*****************************************************************************\
> > * *
> > * MMC callbacks *
> > @@ -302,6 +370,39 @@ static int sdhci_uhs2_start_signal_voltage_switch(struct mmc_host *mmc,
> > return sdhci_start_signal_voltage_switch(mmc, ios);
> > }
> >
> > +int sdhci_uhs2_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> > +{
> > + struct sdhci_host *host = mmc_priv(mmc);
> > +
> > + if (!(host->version >= SDHCI_SPEC_400) ||
> > + !(host->mmc->flags & MMC_UHS2_SUPPORT &&
> > + host->mmc->caps2 & MMC_CAP2_SD_UHS2)) {
> > + sdhci_set_ios(mmc, ios);
> > + return 0;
> > + }
> > +
> > + if (ios->power_mode == MMC_POWER_UNDEFINED)
> > + return 1;
>
> ->uhs2_set_ios() expects 0 or a negative error code.
> This case is not an error.
>
> return 0;
>
I will update it in the patch#14 of the new [PATCH V6].
> > +
> > + if (host->flags & SDHCI_DEVICE_DEAD) {
> > + if (!IS_ERR(mmc->supply.vmmc) &&
> > + ios->power_mode == MMC_POWER_OFF)
> > + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
> > + if (!IS_ERR_OR_NULL(mmc->supply.vmmc2) &&
> > + ios->power_mode == MMC_POWER_OFF)
> > + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc2, 0);
> > + return 1;
>
> This is an error, so a negative code is needed
>
I will update it in the patch#14 of the new [PATCH V6].
> > + }
> > +
> > + /* FIXME: host->timing = ios->timing */
>
> Yes, __sdhci_uhs2_set_ios() should do that when it sets the timing
>
I will update it in the patch#14 of the new [PATCH V6].
> > +
> > + sdhci_set_ios_common(mmc, ios);
> > +
> > + __sdhci_uhs2_set_ios(mmc, ios);
> > +
> > + return 0;
> > +}
> > +
> > /*****************************************************************************\
> > * *
> > * Driver init/exit *
> > @@ -312,6 +413,7 @@ static int sdhci_uhs2_host_ops_init(struct sdhci_host *host)
> > {
> > host->mmc_host_ops.start_signal_voltage_switch =
> > sdhci_uhs2_start_signal_voltage_switch;
> > + host->mmc_host_ops.uhs2_set_ios = sdhci_uhs2_set_ios;
> >
> > return 0;
> > }
> > diff --git a/drivers/mmc/host/sdhci-uhs2.h b/drivers/mmc/host/sdhci-uhs2.h
> > index 5ea235b14108..23368448ccd4 100644
> > --- a/drivers/mmc/host/sdhci-uhs2.h
> > +++ b/drivers/mmc/host/sdhci-uhs2.h
> > @@ -216,5 +216,6 @@ void sdhci_uhs2_reset(struct sdhci_host *host, u16 mask);
> > void sdhci_uhs2_set_power(struct sdhci_host *host, unsigned char mode,
> > unsigned short vdd);
> > void sdhci_uhs2_set_timeout(struct sdhci_host *host, struct mmc_command *cmd);
> > +void sdhci_uhs2_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set);
> >
> > #endif /* __SDHCI_UHS2_H */
> > diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> > index dfa0939a9058..de47c71995fb 100644
> > --- a/drivers/mmc/host/sdhci.c
> > +++ b/drivers/mmc/host/sdhci.c
> > @@ -47,8 +47,6 @@
> > static unsigned int debug_quirks = 0;
> > static unsigned int debug_quirks2;
> >
> > -static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable);
> > -
> > static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd);
> >
> > void sdhci_dumpregs(struct sdhci_host *host)
> > @@ -1888,6 +1886,9 @@ static u16 sdhci_get_preset_value(struct sdhci_host *host)
> > case MMC_TIMING_MMC_HS400:
> > preset = sdhci_readw(host, SDHCI_PRESET_FOR_HS400);
> > break;
> > + case MMC_TIMING_SD_UHS2:
> > + preset = sdhci_readw(host, SDHCI_PRESET_FOR_UHS2);
> > + break;
> > default:
> > pr_warn("%s: Invalid UHS-I mode selected\n",
> > mmc_hostname(host->mmc));
> > @@ -2305,20 +2306,9 @@ void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing)
> > }
> > EXPORT_SYMBOL_GPL(sdhci_set_uhs_signaling);
> >
> > -void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> > +void sdhci_set_ios_common(struct mmc_host *mmc, struct mmc_ios *ios)
> > {
> > struct sdhci_host *host = mmc_priv(mmc);
> > - u8 ctrl;
> > -
> > - if (ios->power_mode == MMC_POWER_UNDEFINED)
> > - return;
> > -
> > - if (host->flags & SDHCI_DEVICE_DEAD) {
> > - if (!IS_ERR(mmc->supply.vmmc) &&
> > - ios->power_mode == MMC_POWER_OFF)
> > - mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
> > - return;
> > - }
> >
> > /*
> > * Reset the chip on each power off.
> > @@ -2355,6 +2345,25 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> > host->ops->set_power(host, ios->power_mode, ios->vdd);
> > else
> > sdhci_set_power(host, ios->power_mode, ios->vdd);
> > +}
> > +EXPORT_SYMBOL_GPL(sdhci_set_ios_common);
> > +
> > +void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> > +{
> > + struct sdhci_host *host = mmc_priv(mmc);
> > + u8 ctrl;
> > +
> > + if (ios->power_mode == MMC_POWER_UNDEFINED)
> > + return;
> > +
> > + if (host->flags & SDHCI_DEVICE_DEAD) {
> > + if (!IS_ERR(mmc->supply.vmmc) &&
> > + ios->power_mode == MMC_POWER_OFF)
> > + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
> > + return;
> > + }
> > +
> > + sdhci_set_ios_common(mmc, ios);
> >
> > if (host->ops->platform_send_init_74_clocks)
> > host->ops->platform_send_init_74_clocks(host, ios->power_mode);
> > @@ -2935,7 +2944,7 @@ int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
> > }
> > EXPORT_SYMBOL_GPL(sdhci_execute_tuning);
> >
> > -static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
> > +void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
> > {
> > /* Host Controller v3.00 defines preset value registers */
> > if (host->version < SDHCI_SPEC_300)
> > @@ -2963,6 +2972,7 @@ static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
> > host->preset_enabled = enable;
> > }
> > }
> > +EXPORT_SYMBOL_GPL(sdhci_enable_preset_value);
> >
> > static void sdhci_post_req(struct mmc_host *mmc, struct mmc_request *mrq,
> > int err)
> > diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> > index c34ca6ffbff6..22d7f47862ae 100644
> > --- a/drivers/mmc/host/sdhci.h
> > +++ b/drivers/mmc/host/sdhci.h
> > @@ -871,6 +871,8 @@ void sdhci_set_bus_width(struct sdhci_host *host, int width);
> > void sdhci_reset(struct sdhci_host *host, u8 mask);
> > void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing);
> > int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode);
> > +void sdhci_enable_preset_value(struct sdhci_host *host, bool enable);
> > +void sdhci_set_ios_common(struct mmc_host *mmc, struct mmc_ios *ios);
> > void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios);
> > int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
> > struct mmc_ios *ios);
>
Thanks, Victor Shih
Powered by blists - more mailing lists