lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20221213090047.3805-1-victor.shih@genesyslogic.com.tw>
Date:   Tue, 13 Dec 2022 17:00:23 +0800
From:   Victor Shih <victorshihgli@...il.com>
To:     ulf.hansson@...aro.org, adrian.hunter@...el.com
Cc:     linux-mmc@...r.kernel.org, linux-kernel@...r.kernel.org,
        benchuanggli@...il.com, HL.Liu@...esyslogic.com.tw,
        Greg.tu@...esyslogic.com.tw, takahiro.akashi@...aro.org,
        dlunev@...omium.org, Victor Shih <victor.shih@...esyslogic.com.tw>
Subject: [PATCH V6 00/24] Add support UHS-II for GL9755

Summary
=======
These patches[1] support UHS-II and fix GL9755 UHS-II compatibility.

About UHS-II, roughly deal with the following three parts:
1) A UHS-II detection and initialization:
- Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence
  [2]).
- Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]).
- In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section
  3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register
  Setup Sequence.

2) Send Legacy SD command through SD-TRAN
- Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD
  compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet
  Types and Format Overview[3]).
- Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II
  CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]).

3) UHS-II Interrupt
- Except for UHS-II error interrupts, most interrupts share the original
  interrupt registers.

Patch structure
===============
patch#1-#6:  for core
patch#7-#23: for sdhci
patch#24:    for GL9755

Changes in v6 (Dec. 12, 2022)
* rebased to the linux-kernel-v6.1.0-rc8 in Ulf Hansson next branch.
* according to the guidance and overall architecture provided 
  by Ulf Hansson, Ben Chuang and Jason Lai to implement the
  UHS-2 Core function based on the patches of the [V4,0/6] 
  Preparations to support SD UHS-II cards[5].
* according to the guidance and comments provided by 
  Adrian Hunter, Ben Chuang and AKASHI Takahiro to implement 
  the UHS-2 Host function based on the patches of the 
  [RFC,v3.1,00/27] Add support UHS-II for GL9755[4].
* implement the necessary function to let the UHS-2 Core/Host
  work properly.
* fix most of checkpatch warnings/errors.
* according to the guidance and comments provided by 
  Adrian Hunter, Ben Chuang to implement the UHS-2 
  Host function based on the patches of the 
  [V5,00/26] Add support UHS-II for GL9755[6].
* The uhs2_post_attach_sd() has implemented in Patch#6 and 
  Patch#17 so drop the V5 version of the Patch#23.
* Modifies the usage of the flags used by the sdhci host for
  MMC_UHS2_INITIALIZED.
* Patch#5: Drop unused definitions and functions.
* Patch#7: Rename definitions.
           Use BIT() GENMASK() in some cases.
* Patch#8: Merge V5 version of Patch[7] and Patch[9] into 
           V6 version of Patch[8].
* Patch#9: Drop unnecessary function.
           Rename used definitions.
* Patch#10: Drop unnecessary function and simplify some code.
* Patch#11: Drop unnecessary function.
            Add new mmc_opt_regulator_set_ocr function.
* Patch#13: Drop unnecessary function.
            Use GENMASK() and FIELD_PREP() in some cases.
* Patch#14: Drop unnecessary function.
            Modify return value in some function.
            Use GENMASK() and FIELD_PREP() in some cases.
* Patch#15: Drop unnecessary function.
            Rename used definitions.
            Use GENMASK() and FIELD_GET() in some cases.
            Wrap at 100 columns in some functions.
* Patch#16: Drop unnecessary function.
* Patch#17: Drop unnecessary function.
            Drop the unnecessary parameter when call the DBG()
            function.
            Rename used definitions.
            Cancel the export state of some functions.
            Use GENMASK() and FIELD_PREP() in some cases.
* Patch#18: Drop unnecessary function.
            Add uhs2_dev_cmd function to simplify some functions.
            Rename used definitions.
            Cancel the export state of some functions.
            Use GENMASK() and FIELD_PREP() in some cases.
* Patch#19: Drop unnecessary function.
            Add sdhci_uhs2_mode() in some functions.
            Rename used definitions.
            Cancel the export state of some functions.
* Patch#20: Add new complete_work_fn/thread_irq_fn variables in
            struct sdhci_host.
            Use complete_work_fn/thread_irq_fn variables in 
            sdhci_alloc_host()/sdhci_uhs2_add_host().
            Rename used definitions.
* Patch[24]: Rename used definitions.

Reference
=========
[1] https://gitlab.com/ben.chuang/linux-uhs2-gl9755.git
[2] SD Host Controller Simplified Specification 4.20
[3] UHS-II Simplified Addendum 1.02
[4] https://patchwork.kernel.org/project/linux-mmc/cover/20201106022726.19831-1-takahiro.akashi@linaro.org/
[5] https://patchwork.kernel.org/project/linux-mmc/cover/20220418115833.10738-1-jasonlai.genesyslogic@gmail.com/
[6] https://patchwork.kernel.org/project/linux-mmc/cover/20221019110647.11076-1-victor.shih@genesyslogic.com.tw/

----------------- original cover letter from v5 -----------------
Summary
=======
These patches[1] support UHS-II and fix GL9755 UHS-II compatibility.

About UHS-II, roughly deal with the following three parts:
1) A UHS-II detection and initialization:
- Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence
  [2]).
- Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]).
- In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section
  3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register
  Setup Sequence.

2) Send Legacy SD command through SD-TRAN
- Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD
  compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet
  Types and Format Overview[3]).
- Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II
  CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]).

3) UHS-II Interrupt
- Except for UHS-II error interrupts, most interrupts share the original
  interrupt registers.

Patch structure
===============
patch#1-#6:  for core
patch#7-#25: for sdhci
patch#26:    for GL9755

Changes in v5 (Oct. 19, 2022)
* rebased to the linux-kernel-v6.1-rc1 in Ulf Hansson next branch.
* according to the guidance and overall architecture provided 
  by Ulf Hansson, Ben Chuang and Jason Lai to implement the
  UHS-2 Core function based on the patches of the [V4,0/6] 
  Preparations to support SD UHS-II cards[5].
* according to the guidance and comments provided by 
  Adrian Hunter, Ben Chuang and AKASHI Takahiro to implement 
  the UHS-2 Host function based on the patches of the 
  [RFC,v3.1,00/27] Add support UHS-II for GL9755[4].
* implement the necessary function to let the UHS-2 Core/Host
  work properly.
* fix most of checkpatch warnings/errors

Reference
=========
[1] https://gitlab.com/ben.chuang/linux-uhs2-gl9755.git
[2] SD Host Controller Simplified Specification 4.20
[3] UHS-II Simplified Addendum 1.02
[4] https://patchwork.kernel.org/project/linux-mmc/cover/20201106022726.19831-1-takahiro.akashi@linaro.org/
[5] https://patchwork.kernel.org/project/linux-mmc/cover/20220418115833.10738-1-jasonlai.genesyslogic@gmail.com/
 
----------------- original cover letter from v3.1 -----------------
This is an interim snapshot of our next version, v4, for enabling
UHS-II on MMC/SD.

It is focused on 'sdhci' side to address Adrian's comments regarding
"modularising" sdhci-uhs2.c.
The whole aim of this version is to get early feedback from Adrian (and
others) on this issue. Without any consensus about the code structure,
it would make little sense to go further ahead on sdhci side.
(Actually, Adrian has made no comments other than "modularising" so far.)

I heavily reworked/refactored sdhci-uhs2.c and re-organised the patch
set to meet what I believe Adrian expects; no UHS-II related code in
Legacy (UHS-I) code or sdhci.c.

Nevertheless, almost of all changes I made are trivial and straightforward
in this direction, and I believe that there is no logic changed since v3
except sdhci_uhs2_irq(), as ops->irq hook, where we must deal with UHS-II
command sequences in addition to UHS-II errors. So I added extra handlings.

I admit that there is plenty of room for improvements (for example,
handling host->flags), but again the focal point here is how sdhci-uhs2.c
should be built as a module.

Please review this series (particularly Patch#8-#26 and #27) from this
viewpoint in the first place.
(Ben is working on 'host' side but there is no change on 'host' side
in this submission except a minor tweak.)

Thanks,
-Takahiro Akashi

------ original cover letter from v3 ------
Summary
=======
These patches[1] support UHS-II and fix GL9755 UHS-II compatibility.

About UHS-II, roughly deal with the following three parts:
1) A UHS-II detection and initialization:
- Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence
  [2]).
- Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]).
- In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section
  3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register
  Setup Sequence.

2) Send Legacy SD command through SD-TRAN
- Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD
  compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet
  Types and Format Overview[3]).
- Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II
  CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]).

3) UHS-II Interrupt
- Except for UHS-II error interrupts, most interrupts share the original
  interrupt registers.

Patch structure
===============
patch#1-#7: for core
patch#8-#17: for sdhci
patch#18-#21: for GL9755

Tests
=====
Ran 'dd' command to evaluate the performance:
(SanDisk UHS-II card on GL9755 controller)
                             Read    Write
UHS-II disabled (UHS-I): 88.3MB/s 60.7MB/s
UHS-II enabled         :  206MB/s   80MB/s

TODO
====
- replace some define with BIT macro

Reference
=========
[1] https://gitlab.com/ben.chuang/linux-uhs2-gl9755.git
[2] SD Host Controller Simplified Specification 4.20
[3] UHS-II Simplified Addendum 1.02

Changes in v3 (Jul. 10, 2020)
* rebased to v5.8-rc4
* add copyright notice
* reorganize the patch set and split some commits into smaller ones
* separate uhs-2 headers from others
* correct wrong spellings
* fix most of checkpatch warnings/errors
* remove all k[cz]alloc() from the code
* guard sdhci-uhs2 specific code with
      'if (IS_ENABLED(CONFIG_MMC_SDHCI_UHS2))'
* make sdhci-uhs2.c as a module
* trivial changes, including
  - rename back sdhci-core.c to sdhci.c
  - allow vendor code to disable uhs2 if v4_mode == 0
      in __sdhci_add_host()
  - merge uhs2_power_up() into mmc_power_up()
  - remove flag_uhs2 from mmc_attach_sd()
  - add function descriptions to EXPORT'ed functions
  - other minor code optimization

Changes in v2 (Jan. 9, 2020)
* rebased to v5.5-rc5

AKASHI Takahiro (1):
  mmc: sdhci-pci: add UHS-II support framework

Ben Chuang (1):
  mmc: sdhci-uhs2: add post-mmc_attach_sd hook

Ulf Hansson (3):
  mmc: core: Prepare to support SD UHS-II cards
  mmc: core: Announce successful insertion of an SD UHS-II card
  mmc: core: Extend support for mmc regulators with a vqmmc2

Victor Shih (19):
  mmc: core: Cleanup printing of speed mode at card insertion
  mmc: core: Add definitions for SD UHS-II cards
  mmc: core: Support UHS-II card control and access
  mmc: sdhci: add UHS-II related definitions in headers
  mmc: sdhci: add UHS-II module and add a kernel configuration
  mmc: sdhci-uhs2: dump UHS-II registers
  mmc: sdhci-uhs2: add reset function and uhs2_mode function
  mmc: sdhci-uhs2: add set_power() to support vdd2
  mmc: sdhci-uhs2: skip signal_voltage_switch()
  mmc: sdhci-uhs2: add set_timeout()
  mmc: sdhci-uhs2: add set_ios()
  mmc: sdhci-uhs2: add detect_init() to detect the interface
  mmc: sdhci-uhs2: add clock operations
  mmc: sdhci-uhs2: add uhs2_control() to initialise the interface
  mmc: sdhci-uhs2: add request() and others
  mmc: sdhci-uhs2: add irq() and others
  mmc: sdhci-uhs2: add add_host() and others to set up the driver
  mmc: sdhci-uhs2: add pre-detect_init hook
  mmc: sdhci-pci-gli: enable UHS-II mode for GL9755

 drivers/mmc/core/Makefile         |    2 +-
 drivers/mmc/core/block.c          |    6 +-
 drivers/mmc/core/bus.c            |   37 +-
 drivers/mmc/core/core.c           |   37 +-
 drivers/mmc/core/core.h           |    1 +
 drivers/mmc/core/host.h           |    4 +
 drivers/mmc/core/mmc_ops.c        |   25 +-
 drivers/mmc/core/mmc_ops.h        |    1 +
 drivers/mmc/core/regulator.c      |   34 +
 drivers/mmc/core/sd.c             |   11 +-
 drivers/mmc/core/sd.h             |    3 +
 drivers/mmc/core/sd_ops.c         |   13 +
 drivers/mmc/core/sd_ops.h         |    3 +
 drivers/mmc/core/sd_uhs2.c        | 1400 ++++++++++++++++++++++++++++
 drivers/mmc/host/Kconfig          |   10 +
 drivers/mmc/host/Makefile         |    1 +
 drivers/mmc/host/sdhci-pci-core.c |   16 +-
 drivers/mmc/host/sdhci-pci-gli.c  |  309 ++++++-
 drivers/mmc/host/sdhci-pci.h      |    3 +
 drivers/mmc/host/sdhci-uhs2.c     | 1414 +++++++++++++++++++++++++++++
 drivers/mmc/host/sdhci-uhs2.h     |  188 ++++
 drivers/mmc/host/sdhci.c          |  343 ++++---
 drivers/mmc/host/sdhci.h          |  100 +-
 include/linux/mmc/card.h          |   47 +
 include/linux/mmc/core.h          |   13 +
 include/linux/mmc/host.h          |   91 ++
 include/linux/mmc/sd_uhs2.h       |  263 ++++++
 27 files changed, 4205 insertions(+), 170 deletions(-)
 create mode 100644 drivers/mmc/core/sd_uhs2.c
 create mode 100644 drivers/mmc/host/sdhci-uhs2.c
 create mode 100644 drivers/mmc/host/sdhci-uhs2.h
 create mode 100644 include/linux/mmc/sd_uhs2.h

-- 
2.25.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ