| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 13 Dec 2022 17:00:30 +0800
From: Victor Shih <victorshihgli@...il.com>
To: ulf.hansson@...aro.org, adrian.hunter@...el.com
Cc: linux-mmc@...r.kernel.org, linux-kernel@...r.kernel.org,
benchuanggli@...il.com, HL.Liu@...esyslogic.com.tw,
Greg.tu@...esyslogic.com.tw, takahiro.akashi@...aro.org,
dlunev@...omium.org, Victor Shih <victor.shih@...esyslogic.com.tw>,
Ben Chuang <ben.chuang@...esyslogic.com.tw>
Subject: [PATCH V6 07/24] mmc: sdhci: add UHS-II related definitions in headers
Add UHS-II related definitions in shdci.h and sdhci-uhs2.h.
Signed-off-by: Ben Chuang <ben.chuang@...esyslogic.com.tw>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@...aro.org>
Signed-off-by: Victor Shih <victor.shih@...esyslogic.com.tw>
---
drivers/mmc/host/sdhci-uhs2.h | 175 ++++++++++++++++++++++++++++++++++
drivers/mmc/host/sdhci.h | 62 +++++++++++-
2 files changed, 236 insertions(+), 1 deletion(-)
create mode 100644 drivers/mmc/host/sdhci-uhs2.h
diff --git a/drivers/mmc/host/sdhci-uhs2.h b/drivers/mmc/host/sdhci-uhs2.h
new file mode 100644
index 000000000000..29cd91f12b9e
--- /dev/null
+++ b/drivers/mmc/host/sdhci-uhs2.h
@@ -0,0 +1,175 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * linux/drivers/mmc/host/sdhci-uhs2.h - Secure Digital Host Controller
+ * Interface driver
+ *
+ * Header file for Host Controller UHS2 related registers.
+ *
+ * Copyright (C) 2014 Intel Corp, All Rights Reserved.
+ */
+#ifndef __SDHCI_UHS2_H
+#define __SDHCI_UHS2_H
+
+#include <linux/bits.h>
+
+/* SDHCI Category B registers : UHS2 only */
+#define SDHCI_UHS2_CM_TRAN_RESP 0x10
+#define SDHCI_UHS2_SD_TRAN_RESP 0x18
+#define SDHCI_UHS2_SD_TRAN_RESP_1 0x1C
+
+#define SDHCI_UHS2_BLOCK_SIZE 0x80
+#define SDHCI_UHS2_MAKE_BLKSZ(dma, blksz) ((((dma) & 0x7) << 12) | ((blksz) & 0xFFF))
+
+#define SDHCI_UHS2_BLOCK_COUNT 0x84
+
+#define SDHCI_UHS2_CMD_PACKET 0x88
+#define SDHCI_UHS2_CMD_PACK_MAX_LEN 20
+
+#define SDHCI_UHS2_TRANS_MODE 0x9C
+#define SDHCI_UHS2_TRNS_DMA BIT(0)
+#define SDHCI_UHS2_TRNS_BLK_CNT_EN BIT(1)
+#define SDHCI_UHS2_TRNS_DATA_TRNS_WRT BIT(4)
+#define SDHCI_UHS2_TRNS_BLK_BYTE_MODE BIT(5)
+#define SDHCI_UHS2_TRNS_RES_R5 BIT(6)
+#define SDHCI_UHS2_TRNS_RES_ERR_CHECK_EN BIT(7)
+#define SDHCI_UHS2_TRNS_RES_INT_DIS BIT(8)
+#define SDHCI_UHS2_TRNS_WAIT_EBSY BIT(14)
+#define SDHCI_UHS2_TRNS_2L_HD BIT(15)
+
+#define SDHCI_UHS2_CMD 0x9E
+#define SDHCI_UHS2_CMD_SUB_CMD BIT(2)
+#define SDHCI_UHS2_CMD_DATA BIT(5)
+#define SDHCI_UHS2_CMD_TRNS_ABORT BIT(6)
+#define SDHCI_UHS2_CMD_CMD12 BIT(7)
+#define SDHCI_UHS2_CMD_DORMANT GENMASK(7, 6)
+#define SDHCI_UHS2_CMD_PACK_LEN_MASK GENMASK(12, 8)
+
+#define SDHCI_UHS2_RESPONSE 0xA0
+#define SDHCI_UHS2_RESPONSE_MAX_LEN 20
+
+#define SDHCI_UHS2_MSG_SELECT 0xB4
+#define SDHCI_UHS2_MSG_SELECT_CURR 0x0
+#define SDHCI_UHS2_MSG_SELECT_ONE 0x1
+#define SDHCI_UHS2_MSG_SELECT_TWO 0x2
+#define SDHCI_UHS2_MSG_SELECT_THREE 0x3
+
+#define SDHCI_UHS2_MSG 0xB8
+
+#define SDHCI_UHS2_DEV_INT_STATUS 0xBC
+
+#define SDHCI_UHS2_DEV_SELECT 0xBE
+#define SDHCI_UHS2_DEV_SEL_MASK GENMASK(3, 0)
+#define SDHCI_UHS2_DEV_SEL_INT_MSG_EN BIT(7)
+
+#define SDHCI_UHS2_DEV_INT_CODE 0xBF
+
+#define SDHCI_UHS2_SW_RESET 0xC0
+#define SDHCI_UHS2_SW_RESET_FULL BIT(0)
+#define SDHCI_UHS2_SW_RESET_SD BIT(1)
+
+#define SDHCI_UHS2_TIMER_CTRL 0xC2
+#define SDHCI_UHS2_TIMER_CTRL_DEADLOCK_MASK GENMASK(7, 4)
+
+#define SDHCI_UHS2_INT_STATUS 0xC4
+#define SDHCI_UHS2_INT_STATUS_ENABLE 0xC8
+#define SDHCI_UHS2_INT_SIGNAL_ENABLE 0xCC
+#define SDHCI_UHS2_INT_HEADER_ERR BIT(0)
+#define SDHCI_UHS2_INT_RES_ERR BIT(1)
+#define SDHCI_UHS2_INT_RETRY_EXP BIT(2)
+#define SDHCI_UHS2_INT_CRC BIT(3)
+#define SDHCI_UHS2_INT_FRAME_ERR BIT(4)
+#define SDHCI_UHS2_INT_TID_ERR BIT(5)
+#define SDHCI_UHS2_INT_UNRECOVER BIT(7)
+#define SDHCI_UHS2_INT_EBUSY_ERR BIT(8)
+#define SDHCI_UHS2_INT_ADMA_ERROR BIT(15)
+#define SDHCI_UHS2_INT_CMD_TIMEOUT BIT(16)
+#define SDHCI_UHS2_INT_DEADLOCK_TIMEOUT BIT(17)
+#define SDHCI_UHS2_INT_VENDOR_ERR BIT(27)
+#define SDHCI_UHS2_INT_ERROR_MASK \
+ (SDHCI_UHS2_INT_HEADER_ERR | \
+ SDHCI_UHS2_INT_RES_ERR | \
+ SDHCI_UHS2_INT_RETRY_EXP | \
+ SDHCI_UHS2_INT_CRC | \
+ SDHCI_UHS2_INT_FRAME_ERR | \
+ SDHCI_UHS2_INT_TID_ERR | \
+ SDHCI_UHS2_INT_UNRECOVER | \
+ SDHCI_UHS2_INT_EBUSY_ERR | \
+ SDHCI_UHS2_INT_ADMA_ERROR | \
+ SDHCI_UHS2_INT_CMD_TIMEOUT | \
+ SDHCI_UHS2_INT_DEADLOCK_TIMEOUT)
+#define SDHCI_UHS2_INT_CMD_ERR_MASK \
+ (SDHCI_UHS2_INT_HEADER_ERR | \
+ SDHCI_UHS2_INT_RES_ERR | \
+ SDHCI_UHS2_INT_FRAME_ERR | \
+ SDHCI_UHS2_INT_TID_ERR | \
+ SDHCI_UHS2_INT_CMD_TIMEOUT)
+/* CRC Error occurs during a packet receiving */
+#define SDHCI_UHS2_INT_DATA_ERR_MASK \
+ (SDHCI_UHS2_INT_RETRY_EXP | \
+ SDHCI_UHS2_INT_CRC | \
+ SDHCI_UHS2_INT_UNRECOVER | \
+ SDHCI_UHS2_INT_EBUSY_ERR | \
+ SDHCI_UHS2_INT_ADMA_ERROR | \
+ SDHCI_UHS2_INT_DEADLOCK_TIMEOUT)
+
+#define SDHCI_UHS2_SETTINGS_PTR 0xE0
+#define SDHCI_UHS2_GEN_SETTINGS_POWER_LOW BIT(0)
+#define SDHCI_UHS2_GEN_SETTINGS_N_LANES_MASK GENMASK(11, 8)
+#define SDHCI_UHS2_FD_OR_2L_HD 0x0 /* 2 lanes */
+#define SDHCI_UHS2_2D1U_FD 0x2 /* 3 lanes, 2 down, 1 up, full duplex */
+#define SDHCI_UHS2_1D2U_FD 0x3 /* 3 lanes, 1 down, 2 up, full duplex */
+#define SDHCI_UHS2_2D2U_FD 0x4 /* 4 lanes, 2 down, 2 up, full duplex */
+
+#define SDHCI_UHS2_PHY_SET_SPEED_B BIT(6)
+#define SDHCI_UHS2_PHY_HIBERNATE_EN BIT(12)
+#define SDHCI_UHS2_PHY_N_LSS_SYN_MASK GENMASK(19, 16)
+#define SDHCI_UHS2_PHY_N_LSS_DIR_MASK GENMASK(23, 20)
+
+#define SDHCI_UHS2_TRAN_N_FCU_MASK GENMASK(15, 8)
+#define SDHCI_UHS2_TRAN_RETRY_CNT_MASK GENMASK(17, 16)
+#define SDHCI_UHS2_TRAN_1_N_DAT_GAP_MASK GENMASK(7, 0)
+
+#define SDHCI_UHS2_CAPS_PTR 0xE2
+#define SDHCI_UHS2_CAPS_OFFSET 0
+#define SDHCI_UHS2_CAPS_DAP_MASK GENMASK(3, 0)
+#define SDHCI_UHS2_CAPS_GAP_MASK GENMASK(7, 4)
+#define SDHCI_UHS2_CAPS_GAP(gap) ((gap) * 360)
+#define SDHCI_UHS2_CAPS_LANE_MASK GENMASK(13, 8)
+#define SDHCI_UHS2_CAPS_2L_HD_FD 1
+#define SDHCI_UHS2_CAPS_2D1U_FD 2
+#define SDHCI_UHS2_CAPS_1D2U_FD 4
+#define SDHCI_UHS2_CAPS_2D2U_FD 8
+#define SDHCI_UHS2_CAPS_ADDR_64 BIT(14)
+#define SDHCI_UHS2_CAPS_BOOT BIT(15)
+#define SDHCI_UHS2_CAPS_DEV_TYPE_MASK GENMASK(17, 16)
+#define SDHCI_UHS2_CAPS_DEV_TYPE_RMV 0
+#define SDHCI_UHS2_CAPS_DEV_TYPE_EMB 1
+#define SDHCI_UHS2_CAPS_DEV_TYPE_EMB_RMV 2
+#define SDHCI_UHS2_CAPS_NUM_DEV_MASK GENMASK(21, 18)
+#define SDHCI_UHS2_CAPS_BUS_TOPO_MASK GENMASK(23, 22)
+#define SDHCI_UHS2_CAPS_BUS_TOPO_SHIFT 22
+#define SDHCI_UHS2_CAPS_BUS_TOPO_P2P 0
+#define SDHCI_UHS2_CAPS_BUS_TOPO_RING 1
+#define SDHCI_UHS2_CAPS_BUS_TOPO_HUB 2
+#define SDHCI_UHS2_CAPS_BUS_TOPO_HUB_RING 3
+
+#define SDHCI_UHS2_CAPS_PHY_OFFSET 4
+#define SDHCI_UHS2_CAPS_PHY_REV_MASK GENMASK(5, 0)
+#define SDHCI_UHS2_CAPS_PHY_RANGE_MASK GENMASK(7, 6)
+#define SDHCI_UHS2_CAPS_PHY_RANGE_A 0
+#define SDHCI_UHS2_CAPS_PHY_RANGE_B 1
+#define SDHCI_UHS2_CAPS_PHY_N_LSS_SYN_MASK GENMASK(19, 16)
+#define SDHCI_UHS2_CAPS_PHY_N_LSS_DIR_MASK GENMASK(23, 20)
+#define SDHCI_UHS2_CAPS_TRAN_OFFSET 8
+#define SDHCI_UHS2_CAPS_TRAN_LINK_REV_MASK GENMASK(5, 0)
+#define SDHCI_UHS2_CAPS_TRAN_N_FCU_MASK GENMASK(15, 8)
+#define SDHCI_UHS2_CAPS_TRAN_HOST_TYPE_MASK GENMASK(18, 16)
+#define SDHCI_UHS2_CAPS_TRAN_BLK_LEN_MASK GENMASK(31, 20)
+
+#define SDHCI_UHS2_CAPS_TRAN_1_OFFSET 12
+#define SDHCI_UHS2_CAPS_TRAN_1_N_DATA_GAP_MASK GENMASK(7, 0)
+
+#define SDHCI_UHS2_EMBED_CTRL_PTR 0xE6
+#define SDHCI_UHS2_VENDOR_PTR 0xE8
+
+#endif /* __SDHCI_UHS2_H */
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 605eaee805f7..40125ecd4e3f 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -43,8 +43,23 @@
#define SDHCI_TRNS_READ 0x10
#define SDHCI_TRNS_MULTI 0x20
+/*
+ * Defined in Host Version 4.0.
+ */
+#define SDHCI_TRNS_RES_TYPE 0x40
+#define SDHCI_TRNS_RES_ERR_CHECK 0x80
+#define SDHCI_TRNS_RES_INT_DIS 0x0100
+
#define SDHCI_COMMAND 0x0E
#define SDHCI_CMD_RESP_MASK 0x03
+
+/*
+ * Host Version 4.10 adds this bit to distinguish a main command or
+ * sub command.
+ * For example with SDIO, CMD52 (sub command) issued during CMD53 (main command).
+ */
+#define SDHCI_CMD_SUB_CMD 0x04
+
#define SDHCI_CMD_CRC 0x08
#define SDHCI_CMD_INDEX 0x10
#define SDHCI_CMD_DATA 0x20
@@ -65,6 +80,9 @@
#define SDHCI_PRESENT_STATE 0x24
#define SDHCI_CMD_INHIBIT 0x00000001
#define SDHCI_DATA_INHIBIT 0x00000002
+
+#define SDHCI_DAT_4_TO_7_LVL_MASK 0x000000F0
+
#define SDHCI_DOING_WRITE 0x00000100
#define SDHCI_DOING_READ 0x00000200
#define SDHCI_SPACE_AVAILABLE 0x00000400
@@ -80,6 +98,15 @@
#define SDHCI_DATA_0_LVL_MASK 0x00100000
#define SDHCI_CMD_LVL 0x01000000
+/* Host Version 4.10 */
+
+#define SDHCI_HOST_REGULATOR_STABLE 0x02000000
+#define SDHCI_CMD_NOT_ISSUED_ERR 0x08000000
+#define SDHCI_SUB_CMD_STATUS 0x10000000
+#define SDHCI_UHS2_IN_DORMANT_STATE 0x20000000
+#define SDHCI_UHS2_LANE_SYNC 0x40000000
+#define SDHCI_UHS2_IF_DETECT 0x80000000
+
#define SDHCI_HOST_CONTROL 0x28
#define SDHCI_CTRL_LED 0x01
#define SDHCI_CTRL_4BITBUS 0x02
@@ -100,6 +127,14 @@
#define SDHCI_POWER_300 0x0C
#define SDHCI_POWER_330 0x0E
+/*
+ * VDD2 - UHS2
+ * VDD2 power on/off and voltage select (UHS2)
+ */
+#define SDHCI_VDD2_POWER_ON 0x10
+#define SDHCI_VDD2_POWER_120 0x80
+#define SDHCI_VDD2_POWER_180 0xA0
+
#define SDHCI_BLOCK_GAP_CONTROL 0x2A
#define SDHCI_WAKE_UP_CONTROL 0x2B
@@ -110,7 +145,7 @@
#define SDHCI_CLOCK_CONTROL 0x2C
#define SDHCI_DIVIDER_SHIFT 8
#define SDHCI_DIVIDER_HI_SHIFT 6
-#define SDHCI_DIV_MASK 0xFF
+#define SDHCI_DIV_MASK 0xFF
#define SDHCI_DIV_MASK_LEN 8
#define SDHCI_DIV_HI_MASK 0x300
#define SDHCI_PROG_CLOCK_MODE 0x0020
@@ -139,6 +174,10 @@
#define SDHCI_INT_CARD_REMOVE 0x00000080
#define SDHCI_INT_CARD_INT 0x00000100
#define SDHCI_INT_RETUNE 0x00001000
+
+/* Host Version 4.10 */
+#define SDHCI_INT_FX_EVENT 0x00002000
+
#define SDHCI_INT_CQE 0x00004000
#define SDHCI_INT_ERROR 0x00008000
#define SDHCI_INT_TIMEOUT 0x00010000
@@ -152,6 +191,9 @@
#define SDHCI_INT_AUTO_CMD_ERR 0x01000000
#define SDHCI_INT_ADMA_ERROR 0x02000000
+/* Host Version 4.0 */
+#define SDHCI_INT_RESP_ERR 0x08000000
+
#define SDHCI_INT_NORMAL_MASK 0x00007FFF
#define SDHCI_INT_ERROR_MASK 0xFFFF8000
@@ -178,6 +220,9 @@
#define SDHCI_AUTO_CMD_END_BIT 0x00000008
#define SDHCI_AUTO_CMD_INDEX 0x00000010
+/* Host Version 4.10 */
+#define SDHCI_AUTO_CMD_RESP_ERR 0x0020
+
#define SDHCI_HOST_CONTROL2 0x3E
#define SDHCI_CTRL_UHS_MASK 0x0007
#define SDHCI_CTRL_UHS_SDR12 0x0000
@@ -186,6 +231,7 @@
#define SDHCI_CTRL_UHS_SDR104 0x0003
#define SDHCI_CTRL_UHS_DDR50 0x0004
#define SDHCI_CTRL_HS400 0x0005 /* Non-standard */
+#define SDHCI_CTRL_UHS2 0x0007
#define SDHCI_CTRL_VDD_180 0x0008
#define SDHCI_CTRL_DRV_TYPE_MASK 0x0030
#define SDHCI_CTRL_DRV_TYPE_B 0x0000
@@ -194,9 +240,12 @@
#define SDHCI_CTRL_DRV_TYPE_D 0x0030
#define SDHCI_CTRL_EXEC_TUNING 0x0040
#define SDHCI_CTRL_TUNED_CLK 0x0080
+#define SDHCI_CTRL_UHS2_ENABLE 0x0100
+#define SDHCI_CTRL_ADMA2_LEN_MODE 0x0400
#define SDHCI_CMD23_ENABLE 0x0800
#define SDHCI_CTRL_V4_MODE 0x1000
#define SDHCI_CTRL_64BIT_ADDR 0x2000
+#define SDHCI_CTRL_ASYNC_INT_ENABLE 0x4000
#define SDHCI_CTRL_PRESET_VAL_ENABLE 0x8000
#define SDHCI_CAPABILITIES 0x40
@@ -219,11 +268,13 @@
#define SDHCI_CAN_VDD_180 0x04000000
#define SDHCI_CAN_64BIT_V4 0x08000000
#define SDHCI_CAN_64BIT 0x10000000
+#define SDHCI_CAN_ASYNC_INT 0x20000000
#define SDHCI_CAPABILITIES_1 0x44
#define SDHCI_SUPPORT_SDR50 0x00000001
#define SDHCI_SUPPORT_SDR104 0x00000002
#define SDHCI_SUPPORT_DDR50 0x00000004
+#define SDHCI_SUPPORT_UHS2 0x00000008
#define SDHCI_DRIVER_TYPE_A 0x00000010
#define SDHCI_DRIVER_TYPE_C 0x00000020
#define SDHCI_DRIVER_TYPE_D 0x00000040
@@ -232,6 +283,7 @@
#define SDHCI_RETUNING_MODE_MASK GENMASK(15, 14)
#define SDHCI_CLOCK_MUL_MASK GENMASK(23, 16)
#define SDHCI_CAN_DO_ADMA3 0x08000000
+#define SDHCI_CAN_VDD2_180 0x10000000 /* UHS-2 1.8V VDD2 */
#define SDHCI_SUPPORT_HS400 0x80000000 /* Non-standard */
#define SDHCI_MAX_CURRENT 0x48
@@ -239,11 +291,14 @@
#define SDHCI_MAX_CURRENT_330_MASK GENMASK(7, 0)
#define SDHCI_MAX_CURRENT_300_MASK GENMASK(15, 8)
#define SDHCI_MAX_CURRENT_180_MASK GENMASK(23, 16)
+#define SDHCI_MAX_CURRENT_1 0x4C
+#define SDHCI_MAX_CURRENT_VDD2_180_MASK GENMASK(7, 0) /* UHS2 */
#define SDHCI_MAX_CURRENT_MULTIPLIER 4
/* 4C-4F reserved for more max current */
#define SDHCI_SET_ACMD12_ERROR 0x50
+/* Host Version 4.10 */
#define SDHCI_SET_INT_ERROR 0x52
#define SDHCI_ADMA_ERROR 0x54
@@ -262,10 +317,15 @@
#define SDHCI_PRESET_FOR_SDR104 0x6C
#define SDHCI_PRESET_FOR_DDR50 0x6E
#define SDHCI_PRESET_FOR_HS400 0x74 /* Non-standard */
+
+/* UHS2 */
+#define SDHCI_PRESET_FOR_UHS2 0x74
#define SDHCI_PRESET_DRV_MASK GENMASK(15, 14)
#define SDHCI_PRESET_CLKGEN_SEL BIT(10)
#define SDHCI_PRESET_SDCLK_FREQ_MASK GENMASK(9, 0)
+#define SDHCI_ADMA3_ADDRESS 0x78
+
#define SDHCI_SLOT_INT_STATUS 0xFC
#define SDHCI_HOST_VERSION 0xFE
--
2.25.1
Powered by blists - more mailing lists