| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221213101921.47924-4-krzysztof.kozlowski@linaro.org>
Date: Tue, 13 Dec 2022 11:19:20 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v2 4/4] arm64: dts: qcom: rename AOSS QMP nodes
The Always On Subsystem (AOSS) QMP is not a power domain controller
since commit 135780456218 ("arm64: dts: qcom: sc7180: Use QMP property
to control load state") and few others. In fact, it was never a power
domain controller but rather control of power state of remote
processors. This power state control is now handled differently, thus
the AOSS QMP nodes do not have power-domain-cells:
sc7280-idp.dtb: power-controller@...0000: '#power-domain-cells' is a required property
From schema: Documentation/devicetree/bindings/power/power-domain.yaml
AOSS QMP is an interface to the actuall AOSS subsystem responsible for
some of power management functions, thus let's call the nodes as
"power-management".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
Changes since v1:
1. Call the nodes "power-management"
---
arch/arm64/boot/dts/qcom/sc7180.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sc7280.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sm6350.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sm8150.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sm8250.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sm8350.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sm8450.dtsi | 2 +-
9 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 906fb9343bcc..1370b7adccd8 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -3248,7 +3248,7 @@ aoss_reset: reset-controller@...0000 {
#reset-cells = <1>;
};
- aoss_qmp: power-controller@...0000 {
+ aoss_qmp: power-management@...0000 {
compatible = "qcom,sc7180-aoss-qmp", "qcom,aoss-qmp";
reg = <0 0x0c300000 0 0x400>;
interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 7c24c2129800..4768ae74d61f 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -4257,7 +4257,7 @@ aoss_reset: reset-controller@...0000 {
#reset-cells = <1>;
};
- aoss_qmp: power-controller@...0000 {
+ aoss_qmp: power-management@...0000 {
compatible = "qcom,sc7280-aoss-qmp", "qcom,aoss-qmp";
reg = <0 0x0c300000 0 0x400>;
interrupts-extended = <&ipcc IPCC_CLIENT_AOP
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 3cb4ca6c53eb..05086169d873 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -1921,7 +1921,7 @@ tsens1: thermal-sensor@...5000 {
#thermal-sensor-cells = <1>;
};
- aoss_qmp: power-controller@...0000 {
+ aoss_qmp: power-management@...0000 {
compatible = "qcom,sc8280xp-aoss-qmp", "qcom,aoss-qmp";
reg = <0 0x0c300000 0 0x400>;
interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 5f1f7cb52c90..a749e6b9d5ac 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -4965,7 +4965,7 @@ aoss_reset: reset-controller@...0000 {
#reset-cells = <1>;
};
- aoss_qmp: power-controller@...0000 {
+ aoss_qmp: power-management@...0000 {
compatible = "qcom,sdm845-aoss-qmp", "qcom,aoss-qmp";
reg = <0 0x0c300000 0 0x400>;
interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index 0f01ff4feb55..8dda257178c9 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -1273,7 +1273,7 @@ tsens1: thermal-sensor@...5000 {
#thermal-sensor-cells = <1>;
};
- aoss_qmp: power-controller@...0000 {
+ aoss_qmp: power-management@...0000 {
compatible = "qcom,sm6350-aoss-qmp", "qcom,aoss-qmp";
reg = <0 0x0c300000 0 0x1000>;
interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index d1b64280ab0b..089f730beb76 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -3589,7 +3589,7 @@ pdc: interrupt-controller@...0000 {
interrupt-controller;
};
- aoss_qmp: power-controller@...0000 {
+ aoss_qmp: power-management@...0000 {
compatible = "qcom,sm8150-aoss-qmp", "qcom,aoss-qmp";
reg = <0x0 0x0c300000 0x0 0x400>;
interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index fbbbae29e0c2..a4e171a59409 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -3741,7 +3741,7 @@ tsens1: thermal-sensor@...5000 {
#thermal-sensor-cells = <1>;
};
- aoss_qmp: power-controller@...0000 {
+ aoss_qmp: power-management@...0000 {
compatible = "qcom,sm8250-aoss-qmp", "qcom,aoss-qmp";
reg = <0 0x0c300000 0 0x400>;
interrupts-extended = <&ipcc IPCC_CLIENT_AOP
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 49db223a0777..1fd0df2e343f 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1717,7 +1717,7 @@ tsens1: thermal-sensor@...5000 {
#thermal-sensor-cells = <1>;
};
- aoss_qmp: power-controller@...0000 {
+ aoss_qmp: power-management@...0000 {
compatible = "qcom,sm8350-aoss-qmp", "qcom,aoss-qmp";
reg = <0 0x0c300000 0 0x400>;
interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index e0d30dadbf8b..e9a835e34ad2 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -2453,7 +2453,7 @@ tsens1: thermal-sensor@...5000 {
#thermal-sensor-cells = <1>;
};
- aoss_qmp: power-controller@...0000 {
+ aoss_qmp: power-management@...0000 {
compatible = "qcom,sm8450-aoss-qmp", "qcom,aoss-qmp";
reg = <0 0x0c300000 0 0x400>;
interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
--
2.34.1
Powered by blists - more mailing lists