| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20221213164304.1126945-2-vigneshr@ti.com>
Date: Tue, 13 Dec 2022 22:13:00 +0530
From: Vignesh Raghavendra <vigneshr@...com>
To: Peter Ujfalusi <peter.ujfalusi@...il.com>,
Vinod Koul <vkoul@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
CC: <dmaengine@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
Vignesh Raghavendra <vigneshr@...com>,
<linux-arm-kernel@...ts.infradead.org>
Subject: [PATCH v3 1/5] dt-bindings: dma: ti: k3-bcdma: Add bindings for BCDMA CSI RX
AM62A SoC has a dedicated BCDMA that serves Camera Serial Interface
(CSI) IP. Add new compatible for the same. Unlike system
BCDMA, this instance only has RX DMA channels and lack TX or block copy
channel. Thus make those properties optional. Additionally CSI RX has
independent power domain, add the binding for the same.
Signed-off-by: Vignesh Raghavendra <vigneshr@...com>
---
v3:
Add min/max constraints for reg-names and reg on per compatible basis
v2:
reorder compatibles alphabetically
Fix reg defintion to min 3 and max 5
Keep top level constraints as is and further restrict
variants within "if-else" blocks
.../devicetree/bindings/dma/ti/k3-bcdma.yaml | 77 ++++++++++++++-----
1 file changed, 59 insertions(+), 18 deletions(-)
diff --git a/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml
index 08627d91e607..2bc48dfd3396 100644
--- a/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml
+++ b/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml
@@ -28,13 +28,19 @@ description: |
PDMAs can be configured via BCDMA split channel's peer registers to match with
the configuration of the legacy peripheral.
-allOf:
- - $ref: /schemas/dma/dma-controller.yaml#
- - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
-
properties:
compatible:
- const: ti,am64-dmss-bcdma
+ enum:
+ - ti,am62a-dmss-bcdma-csirx
+ - ti,am64-dmss-bcdma
+
+ reg:
+ minItems: 3
+ maxItems: 5
+
+ reg-names:
+ minItems: 3
+ maxItems: 5
"#dma-cells":
const: 3
@@ -65,19 +71,13 @@ properties:
cell 3: ASEL value for the channel
- reg:
- maxItems: 5
-
- reg-names:
- items:
- - const: gcfg
- - const: bchanrt
- - const: rchanrt
- - const: tchanrt
- - const: ringrt
-
msi-parent: true
+ power-domains:
+ description:
+ Power domain if available
+ maxItems: 1
+
ti,asel:
$ref: /schemas/types.yaml#/definitions/uint32
description: ASEL value for non slave channels
@@ -123,10 +123,51 @@ required:
- msi-parent
- ti,sci
- ti,sci-dev-id
- - ti,sci-rm-range-bchan
- - ti,sci-rm-range-tchan
- ti,sci-rm-range-rchan
+allOf:
+ - $ref: /schemas/dma/dma-controller.yaml#
+ - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: ti,am62a-dmss-bcdma-csirx
+ then:
+ properties:
+ ti,sci-rm-range-bchan: false
+ ti,sci-rm-range-tchan: false
+
+ reg:
+ maxItems: 3
+
+ reg-names:
+ items:
+ - const: gcfg
+ - const: rchanrt
+ - const: ringrt
+
+ required:
+ - power-domains
+
+ else:
+ properties:
+ reg:
+ minItems: 5
+
+ reg-names:
+ items:
+ - const: gcfg
+ - const: bchanrt
+ - const: rchanrt
+ - const: tchanrt
+ - const: ringrt
+
+ required:
+ - ti,sci-rm-range-bchan
+ - ti,sci-rm-range-tchan
+
unevaluatedProperties: false
examples:
--
2.38.1
Powered by blists - more mailing lists