| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 14 Dec 2022 22:54:55 -0800
From: Ian Rogers <irogers@...gle.com>
To: Peter Zijlstra <peterz@...radead.org>,
Ingo Molnar <mingo@...hat.com>,
Arnaldo Carvalho de Melo <acme@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Alexander Shishkin <alexander.shishkin@...ux.intel.com>,
Jiri Olsa <jolsa@...nel.org>,
Namhyung Kim <namhyung@...nel.org>,
Adrian Hunter <adrian.hunter@...el.com>,
Kan Liang <kan.liang@...ux.intel.com>,
Xing Zhengjun <zhengjun.xing@...ux.intel.com>,
linux-perf-users@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: John Garry <john.g.garry@...cle.com>,
Stephane Eranian <eranian@...gle.com>,
Perry Taylor <perry.taylor@...el.com>,
Caleb Biggers <caleb.biggers@...el.com>,
Ian Rogers <irogers@...gle.com>
Subject: [PATCH v1 17/32] perf vendor events intel: Refresh ivytown metrics
and events
Update the ivytown metrics and events using the new tooling from:
https://github.com/intel/perfmon
The metrics are unchanged but the formulas differ due to parentheses,
use of exponents and removal of redundant operations like "* 1". The
events are unchanged but unused json values are removed. The
formatting changes increase consistency across the json files.
Signed-off-by: Ian Rogers <irogers@...gle.com>
---
.../pmu-events/arch/x86/ivytown/cache.json | 274 ----------
.../arch/x86/ivytown/floating-point.json | 34 --
.../pmu-events/arch/x86/ivytown/frontend.json | 60 ---
.../arch/x86/ivytown/ivt-metrics.json | 133 +++--
.../pmu-events/arch/x86/ivytown/memory.json | 121 -----
.../pmu-events/arch/x86/ivytown/other.json | 8 -
.../pmu-events/arch/x86/ivytown/pipeline.json | 250 ---------
.../arch/x86/ivytown/uncore-cache.json | 388 ++------------
.../arch/x86/ivytown/uncore-interconnect.json | 505 +++++++-----------
.../arch/x86/ivytown/uncore-memory.json | 209 +-------
.../arch/x86/ivytown/uncore-other.json | 254 +--------
.../arch/x86/ivytown/uncore-power.json | 95 ----
.../arch/x86/ivytown/virtual-memory.json | 40 --
13 files changed, 346 insertions(+), 2025 deletions(-)
diff --git a/tools/perf/pmu-events/arch/x86/ivytown/cache.json b/tools/perf/pmu-events/arch/x86/ivytown/cache.json
index d95b98c83914..c8f7d5e66504 100644
--- a/tools/perf/pmu-events/arch/x86/ivytown/cache.json
+++ b/tools/perf/pmu-events/arch/x86/ivytown/cache.json
@@ -1,8 +1,6 @@
[
{
"BriefDescription": "L1D data line replacements",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x51",
"EventName": "L1D.REPLACEMENT",
"PublicDescription": "Counts the number of lines brought into the L1 data cache.",
@@ -11,8 +9,6 @@
},
{
"BriefDescription": "Cycles a demand request was blocked due to Fill Buffers inavailability",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"CounterMask": "1",
"EventCode": "0x48",
"EventName": "L1D_PEND_MISS.FB_FULL",
@@ -22,8 +18,6 @@
},
{
"BriefDescription": "L1D miss outstanding duration in cycles",
- "Counter": "2",
- "CounterHTOff": "2",
"EventCode": "0x48",
"EventName": "L1D_PEND_MISS.PENDING",
"PublicDescription": "Increments the number of outstanding L1D misses every cycle. Set Cmask = 1 and Edge =1 to count occurrences.",
@@ -32,8 +26,6 @@
},
{
"BriefDescription": "Cycles with L1D load Misses outstanding.",
- "Counter": "2",
- "CounterHTOff": "2",
"CounterMask": "1",
"EventCode": "0x48",
"EventName": "L1D_PEND_MISS.PENDING_CYCLES",
@@ -43,8 +35,6 @@
{
"AnyThread": "1",
"BriefDescription": "Cycles with L1D load Misses outstanding from any thread on physical core",
- "Counter": "2",
- "CounterHTOff": "2",
"CounterMask": "1",
"EventCode": "0x48",
"EventName": "L1D_PEND_MISS.PENDING_CYCLES_ANY",
@@ -54,8 +44,6 @@
},
{
"BriefDescription": "Not rejected writebacks from L1D to L2 cache lines in any state.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x28",
"EventName": "L2_L1D_WB_RQSTS.ALL",
"SampleAfterValue": "200003",
@@ -63,8 +51,6 @@
},
{
"BriefDescription": "Not rejected writebacks from L1D to L2 cache lines in E state",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x28",
"EventName": "L2_L1D_WB_RQSTS.HIT_E",
"PublicDescription": "Not rejected writebacks from L1D to L2 cache lines in E state.",
@@ -73,8 +59,6 @@
},
{
"BriefDescription": "Not rejected writebacks from L1D to L2 cache lines in M state",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x28",
"EventName": "L2_L1D_WB_RQSTS.HIT_M",
"PublicDescription": "Not rejected writebacks from L1D to L2 cache lines in M state.",
@@ -83,8 +67,6 @@
},
{
"BriefDescription": "Count the number of modified Lines evicted from L1 and missed L2. (Non-rejected WBs from the DCU.)",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x28",
"EventName": "L2_L1D_WB_RQSTS.MISS",
"PublicDescription": "Not rejected writebacks that missed LLC.",
@@ -93,8 +75,6 @@
},
{
"BriefDescription": "L2 cache lines filling L2",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xF1",
"EventName": "L2_LINES_IN.ALL",
"PublicDescription": "L2 cache lines filling L2.",
@@ -103,8 +83,6 @@
},
{
"BriefDescription": "L2 cache lines in E state filling L2",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xF1",
"EventName": "L2_LINES_IN.E",
"PublicDescription": "L2 cache lines in E state filling L2.",
@@ -113,8 +91,6 @@
},
{
"BriefDescription": "L2 cache lines in I state filling L2",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xF1",
"EventName": "L2_LINES_IN.I",
"PublicDescription": "L2 cache lines in I state filling L2.",
@@ -123,8 +99,6 @@
},
{
"BriefDescription": "L2 cache lines in S state filling L2",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xF1",
"EventName": "L2_LINES_IN.S",
"PublicDescription": "L2 cache lines in S state filling L2.",
@@ -133,8 +107,6 @@
},
{
"BriefDescription": "Clean L2 cache lines evicted by demand",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xF2",
"EventName": "L2_LINES_OUT.DEMAND_CLEAN",
"PublicDescription": "Clean L2 cache lines evicted by demand.",
@@ -143,8 +115,6 @@
},
{
"BriefDescription": "Dirty L2 cache lines evicted by demand",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xF2",
"EventName": "L2_LINES_OUT.DEMAND_DIRTY",
"PublicDescription": "Dirty L2 cache lines evicted by demand.",
@@ -153,8 +123,6 @@
},
{
"BriefDescription": "Dirty L2 cache lines filling the L2",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xF2",
"EventName": "L2_LINES_OUT.DIRTY_ALL",
"PublicDescription": "Dirty L2 cache lines filling the L2.",
@@ -163,8 +131,6 @@
},
{
"BriefDescription": "Clean L2 cache lines evicted by L2 prefetch",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xF2",
"EventName": "L2_LINES_OUT.PF_CLEAN",
"PublicDescription": "Clean L2 cache lines evicted by the MLC prefetcher.",
@@ -173,8 +139,6 @@
},
{
"BriefDescription": "Dirty L2 cache lines evicted by L2 prefetch",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xF2",
"EventName": "L2_LINES_OUT.PF_DIRTY",
"PublicDescription": "Dirty L2 cache lines evicted by the MLC prefetcher.",
@@ -183,8 +147,6 @@
},
{
"BriefDescription": "L2 code requests",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x24",
"EventName": "L2_RQSTS.ALL_CODE_RD",
"PublicDescription": "Counts all L2 code requests.",
@@ -193,8 +155,6 @@
},
{
"BriefDescription": "Demand Data Read requests",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x24",
"EventName": "L2_RQSTS.ALL_DEMAND_DATA_RD",
"PublicDescription": "Counts any demand and L1 HW prefetch data load requests to L2.",
@@ -203,8 +163,6 @@
},
{
"BriefDescription": "Requests from L2 hardware prefetchers",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x24",
"EventName": "L2_RQSTS.ALL_PF",
"PublicDescription": "Counts all L2 HW prefetcher requests.",
@@ -213,8 +171,6 @@
},
{
"BriefDescription": "RFO requests to L2 cache",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x24",
"EventName": "L2_RQSTS.ALL_RFO",
"PublicDescription": "Counts all L2 store RFO requests.",
@@ -223,8 +179,6 @@
},
{
"BriefDescription": "L2 cache hits when fetching instructions, code reads.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x24",
"EventName": "L2_RQSTS.CODE_RD_HIT",
"PublicDescription": "Number of instruction fetches that hit the L2 cache.",
@@ -233,8 +187,6 @@
},
{
"BriefDescription": "L2 cache misses when fetching instructions",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x24",
"EventName": "L2_RQSTS.CODE_RD_MISS",
"PublicDescription": "Number of instruction fetches that missed the L2 cache.",
@@ -243,8 +195,6 @@
},
{
"BriefDescription": "Demand Data Read requests that hit L2 cache",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x24",
"EventName": "L2_RQSTS.DEMAND_DATA_RD_HIT",
"PublicDescription": "Demand Data Read requests that hit L2 cache.",
@@ -253,8 +203,6 @@
},
{
"BriefDescription": "Requests from the L2 hardware prefetchers that hit L2 cache",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x24",
"EventName": "L2_RQSTS.PF_HIT",
"PublicDescription": "Counts all L2 HW prefetcher requests that hit L2.",
@@ -263,8 +211,6 @@
},
{
"BriefDescription": "Requests from the L2 hardware prefetchers that miss L2 cache",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x24",
"EventName": "L2_RQSTS.PF_MISS",
"PublicDescription": "Counts all L2 HW prefetcher requests that missed L2.",
@@ -273,8 +219,6 @@
},
{
"BriefDescription": "RFO requests that hit L2 cache",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x24",
"EventName": "L2_RQSTS.RFO_HIT",
"PublicDescription": "RFO requests that hit L2 cache.",
@@ -283,8 +227,6 @@
},
{
"BriefDescription": "RFO requests that miss L2 cache",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x24",
"EventName": "L2_RQSTS.RFO_MISS",
"PublicDescription": "Counts the number of store RFO requests that miss the L2 cache.",
@@ -293,8 +235,6 @@
},
{
"BriefDescription": "RFOs that access cache lines in any state",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x27",
"EventName": "L2_STORE_LOCK_RQSTS.ALL",
"PublicDescription": "RFOs that access cache lines in any state.",
@@ -303,8 +243,6 @@
},
{
"BriefDescription": "RFOs that hit cache lines in M state",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x27",
"EventName": "L2_STORE_LOCK_RQSTS.HIT_M",
"PublicDescription": "RFOs that hit cache lines in M state.",
@@ -313,8 +251,6 @@
},
{
"BriefDescription": "RFOs that miss cache lines",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x27",
"EventName": "L2_STORE_LOCK_RQSTS.MISS",
"PublicDescription": "RFOs that miss cache lines.",
@@ -323,8 +259,6 @@
},
{
"BriefDescription": "L2 or LLC HW prefetches that access L2 cache",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xF0",
"EventName": "L2_TRANS.ALL_PF",
"PublicDescription": "Any MLC or LLC HW prefetch accessing L2, including rejects.",
@@ -333,8 +267,6 @@
},
{
"BriefDescription": "Transactions accessing L2 pipe",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xF0",
"EventName": "L2_TRANS.ALL_REQUESTS",
"PublicDescription": "Transactions accessing L2 pipe.",
@@ -343,8 +275,6 @@
},
{
"BriefDescription": "L2 cache accesses when fetching instructions",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xF0",
"EventName": "L2_TRANS.CODE_RD",
"PublicDescription": "L2 cache accesses when fetching instructions.",
@@ -353,8 +283,6 @@
},
{
"BriefDescription": "Demand Data Read requests that access L2 cache",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xF0",
"EventName": "L2_TRANS.DEMAND_DATA_RD",
"PublicDescription": "Demand Data Read requests that access L2 cache.",
@@ -363,8 +291,6 @@
},
{
"BriefDescription": "L1D writebacks that access L2 cache",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xF0",
"EventName": "L2_TRANS.L1D_WB",
"PublicDescription": "L1D writebacks that access L2 cache.",
@@ -373,8 +299,6 @@
},
{
"BriefDescription": "L2 fill requests that access L2 cache",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xF0",
"EventName": "L2_TRANS.L2_FILL",
"PublicDescription": "L2 fill requests that access L2 cache.",
@@ -383,8 +307,6 @@
},
{
"BriefDescription": "L2 writebacks that access L2 cache",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xF0",
"EventName": "L2_TRANS.L2_WB",
"PublicDescription": "L2 writebacks that access L2 cache.",
@@ -393,8 +315,6 @@
},
{
"BriefDescription": "RFO requests that access L2 cache",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xF0",
"EventName": "L2_TRANS.RFO",
"PublicDescription": "RFO requests that access L2 cache.",
@@ -403,8 +323,6 @@
},
{
"BriefDescription": "Cycles when L1D is locked",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x63",
"EventName": "LOCK_CYCLES.CACHE_LOCK_DURATION",
"PublicDescription": "Cycles in which the L1D is locked.",
@@ -413,8 +331,6 @@
},
{
"BriefDescription": "Core-originated cacheable demand requests missed LLC",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x2E",
"EventName": "LONGEST_LAT_CACHE.MISS",
"PublicDescription": "This event counts each cache miss condition for references to the last level cache.",
@@ -423,8 +339,6 @@
},
{
"BriefDescription": "Core-originated cacheable demand requests that refer to LLC",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x2E",
"EventName": "LONGEST_LAT_CACHE.REFERENCE",
"PublicDescription": "This event counts requests originating from the core that reference a cache line in the last level cache.",
@@ -433,8 +347,6 @@
},
{
"BriefDescription": "Retired load uops which data sources were LLC and cross-core snoop hits in on-pkg core cache.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xD2",
"EventName": "MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HIT",
"PEBS": "1",
@@ -443,8 +355,6 @@
},
{
"BriefDescription": "Retired load uops which data sources were HitM responses from shared LLC.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xD2",
"EventName": "MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HITM",
"PEBS": "1",
@@ -453,8 +363,6 @@
},
{
"BriefDescription": "Retired load uops which data sources were LLC hit and cross-core snoop missed in on-pkg core cache.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xD2",
"EventName": "MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_MISS",
"PEBS": "1",
@@ -463,8 +371,6 @@
},
{
"BriefDescription": "Retired load uops which data sources were hits in LLC without snoops required.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xD2",
"EventName": "MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_NONE",
"PEBS": "1",
@@ -473,8 +379,6 @@
},
{
"BriefDescription": "Retired load uops whose data source was local DRAM (Snoop not needed, Snoop Miss, or Snoop Hit data not forwarded).",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xD3",
"EventName": "MEM_LOAD_UOPS_LLC_MISS_RETIRED.LOCAL_DRAM",
"SampleAfterValue": "100007",
@@ -482,8 +386,6 @@
},
{
"BriefDescription": "Retired load uops whose data source was remote DRAM (Snoop not needed, Snoop Miss, or Snoop Hit data not forwarded).",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xD3",
"EventName": "MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_DRAM",
"SampleAfterValue": "100007",
@@ -491,8 +393,6 @@
},
{
"BriefDescription": "Data forwarded from remote cache.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xD3",
"EventName": "MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_FWD",
"SampleAfterValue": "100007",
@@ -500,8 +400,6 @@
},
{
"BriefDescription": "Remote cache HITM.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xD3",
"EventName": "MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_HITM",
"SampleAfterValue": "100007",
@@ -509,8 +407,6 @@
},
{
"BriefDescription": "Retired load uops which data sources were load uops missed L1 but hit FB due to preceding miss to the same cache line with data not ready.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xD1",
"EventName": "MEM_LOAD_UOPS_RETIRED.HIT_LFB",
"PEBS": "1",
@@ -519,8 +415,6 @@
},
{
"BriefDescription": "Retired load uops with L1 cache hits as data sources.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xD1",
"EventName": "MEM_LOAD_UOPS_RETIRED.L1_HIT",
"PEBS": "1",
@@ -529,8 +423,6 @@
},
{
"BriefDescription": "Retired load uops which data sources following L1 data-cache miss.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xD1",
"EventName": "MEM_LOAD_UOPS_RETIRED.L1_MISS",
"PEBS": "1",
@@ -539,8 +431,6 @@
},
{
"BriefDescription": "Retired load uops with L2 cache hits as data sources.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xD1",
"EventName": "MEM_LOAD_UOPS_RETIRED.L2_HIT",
"PEBS": "1",
@@ -549,8 +439,6 @@
},
{
"BriefDescription": "Retired load uops with L2 cache misses as data sources.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xD1",
"EventName": "MEM_LOAD_UOPS_RETIRED.L2_MISS",
"PEBS": "1",
@@ -559,8 +447,6 @@
},
{
"BriefDescription": "Retired load uops which data sources were data hits in LLC without snoops required.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xD1",
"EventName": "MEM_LOAD_UOPS_RETIRED.LLC_HIT",
"PEBS": "1",
@@ -569,8 +455,6 @@
},
{
"BriefDescription": "Miss in last-level (L3) cache. Excludes Unknown data-source.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xD1",
"EventName": "MEM_LOAD_UOPS_RETIRED.LLC_MISS",
"PEBS": "1",
@@ -579,8 +463,6 @@
},
{
"BriefDescription": "All retired load uops. (Precise Event)",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xD0",
"EventName": "MEM_UOPS_RETIRED.ALL_LOADS",
"PEBS": "1",
@@ -589,8 +471,6 @@
},
{
"BriefDescription": "All retired store uops. (Precise Event)",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xD0",
"EventName": "MEM_UOPS_RETIRED.ALL_STORES",
"PEBS": "1",
@@ -599,8 +479,6 @@
},
{
"BriefDescription": "Retired load uops with locked access. (Precise Event)",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xD0",
"EventName": "MEM_UOPS_RETIRED.LOCK_LOADS",
"PEBS": "1",
@@ -609,8 +487,6 @@
},
{
"BriefDescription": "Retired load uops that split across a cacheline boundary. (Precise Event)",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xD0",
"EventName": "MEM_UOPS_RETIRED.SPLIT_LOADS",
"PEBS": "1",
@@ -619,8 +495,6 @@
},
{
"BriefDescription": "Retired store uops that split across a cacheline boundary. (Precise Event)",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xD0",
"EventName": "MEM_UOPS_RETIRED.SPLIT_STORES",
"PEBS": "1",
@@ -629,8 +503,6 @@
},
{
"BriefDescription": "Retired load uops that miss the STLB. (Precise Event)",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xD0",
"EventName": "MEM_UOPS_RETIRED.STLB_MISS_LOADS",
"PEBS": "1",
@@ -639,8 +511,6 @@
},
{
"BriefDescription": "Retired store uops that miss the STLB. (Precise Event)",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xD0",
"EventName": "MEM_UOPS_RETIRED.STLB_MISS_STORES",
"PEBS": "1",
@@ -649,8 +519,6 @@
},
{
"BriefDescription": "Demand and prefetch data reads",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xB0",
"EventName": "OFFCORE_REQUESTS.ALL_DATA_RD",
"PublicDescription": "Data read requests sent to uncore (demand and prefetch).",
@@ -659,8 +527,6 @@
},
{
"BriefDescription": "Cacheable and noncacheable code read requests",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xB0",
"EventName": "OFFCORE_REQUESTS.DEMAND_CODE_RD",
"PublicDescription": "Demand code read requests sent to uncore.",
@@ -669,8 +535,6 @@
},
{
"BriefDescription": "Demand Data Read requests sent to uncore",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xB0",
"EventName": "OFFCORE_REQUESTS.DEMAND_DATA_RD",
"PublicDescription": "Demand data read requests sent to uncore.",
@@ -679,8 +543,6 @@
},
{
"BriefDescription": "Demand RFO requests including regular RFOs, locks, ItoM",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xB0",
"EventName": "OFFCORE_REQUESTS.DEMAND_RFO",
"PublicDescription": "Demand RFO read requests sent to uncore, including regular RFOs, locks, ItoM.",
@@ -689,8 +551,6 @@
},
{
"BriefDescription": "Cases when offcore requests buffer cannot take more entries for core",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xB2",
"EventName": "OFFCORE_REQUESTS_BUFFER.SQ_FULL",
"PublicDescription": "Cases when offcore requests buffer cannot take more entries for core.",
@@ -699,8 +559,6 @@
},
{
"BriefDescription": "Offcore outstanding cacheable Core Data Read transactions in SuperQueue (SQ), queue to uncore",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x60",
"EventName": "OFFCORE_REQUESTS_OUTSTANDING.ALL_DATA_RD",
"PublicDescription": "Offcore outstanding cacheable data read transactions in SQ to uncore. Set Cmask=1 to count cycles.",
@@ -709,8 +567,6 @@
},
{
"BriefDescription": "Cycles when offcore outstanding cacheable Core Data Read transactions are present in SuperQueue (SQ), queue to uncore",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"CounterMask": "1",
"EventCode": "0x60",
"EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DATA_RD",
@@ -720,8 +576,6 @@
},
{
"BriefDescription": "Offcore outstanding code reads transactions in SuperQueue (SQ), queue to uncore, every cycle",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"CounterMask": "1",
"EventCode": "0x60",
"EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_CODE_RD",
@@ -731,8 +585,6 @@
},
{
"BriefDescription": "Cycles when offcore outstanding Demand Data Read transactions are present in SuperQueue (SQ), queue to uncore",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"CounterMask": "1",
"EventCode": "0x60",
"EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_DATA_RD",
@@ -742,8 +594,6 @@
},
{
"BriefDescription": "Offcore outstanding demand rfo reads transactions in SuperQueue (SQ), queue to uncore, every cycle",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"CounterMask": "1",
"EventCode": "0x60",
"EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_RFO",
@@ -753,8 +603,6 @@
},
{
"BriefDescription": "Offcore outstanding code reads transactions in SuperQueue (SQ), queue to uncore, every cycle",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x60",
"EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_CODE_RD",
"PublicDescription": "Offcore outstanding Demand Code Read transactions in SQ to uncore. Set Cmask=1 to count cycles.",
@@ -763,8 +611,6 @@
},
{
"BriefDescription": "Offcore outstanding Demand Data Read transactions in uncore queue.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x60",
"EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_DATA_RD",
"PublicDescription": "Offcore outstanding Demand Data Read transactions in SQ to uncore. Set Cmask=1 to count cycles.",
@@ -773,8 +619,6 @@
},
{
"BriefDescription": "Cycles with at least 6 offcore outstanding Demand Data Read transactions in uncore queue",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"CounterMask": "6",
"EventCode": "0x60",
"EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_DATA_RD_GE_6",
@@ -784,8 +628,6 @@
},
{
"BriefDescription": "Offcore outstanding RFO store transactions in SuperQueue (SQ), queue to uncore",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x60",
"EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_RFO",
"PublicDescription": "Offcore outstanding RFO store transactions in SQ to uncore. Set Cmask=1 to count cycles.",
@@ -794,464 +636,348 @@
},
{
"BriefDescription": "Counts demand & prefetch data reads that hit in the LLC and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_HIT.HITM_OTHER_CORE",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x10003c0091",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts demand & prefetch data reads that hit in the LLC and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x4003c0091",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts demand & prefetch data reads that hit in the LLC and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x1003c0091",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts demand & prefetch data reads that hit in the LLC and sibling core snoop returned a clean response",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_HIT.SNOOP_MISS",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x2003c0091",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts all prefetch data reads that hit the LLC",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.LLC_HIT.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x3f803c0090",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts prefetch data reads that hit in the LLC and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.LLC_HIT.HITM_OTHER_CORE",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x10003c0090",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts prefetch data reads that hit in the LLC and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.LLC_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x4003c0090",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts prefetch data reads that hit in the LLC and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.LLC_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x1003c0090",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts prefetch data reads that hit in the LLC and sibling core snoop returned a clean response",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.LLC_HIT.SNOOP_MISS",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x2003c0090",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that hit in the LLC",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_HIT.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x3f803c03f7",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that hit in the LLC and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_HIT.HITM_OTHER_CORE",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x10003c03f7",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that hit in the LLC and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x4003c03f7",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that hit in the LLC and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x1003c03f7",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that hit in the LLC and sibling core snoop returned a clean response",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_HIT.SNOOP_MISS",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x2003c03f7",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts all writebacks from the core to the LLC",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.COREWB.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x10008",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts all demand code reads that hit in the LLC",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.LLC_HIT.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x3f803c0004",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts all demand data reads that hit in the LLC",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.LLC_HIT.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x3f803c0001",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts demand data reads that hit in the LLC and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.LLC_HIT.HITM_OTHER_CORE",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x10003c0001",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts demand data reads that hit in the LLC and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.LLC_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x4003c0001",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts demand data reads that hit in the LLC and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.LLC_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x1003c0001",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts demand data reads that hit in the LLC and sibling core snoop returned a clean response",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.LLC_HIT.SNOOP_MISS",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x2003c0001",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts demand data writes (RFOs) that hit in the LLC and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_RFO.LLC_HIT.HITM_OTHER_CORE",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x10003c0002",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts L2 hints sent to LLC to keep a line from being evicted out of the core caches",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.OTHER.LRU_HINTS",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x803c8000",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts miscellaneous accesses that include port i/o, MMIO and uncacheable memory accesses",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.OTHER.PORTIO_MMIO_UC",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x23ffc08000",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts all prefetch (that bring data to L2) code reads that hit in the LLC",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.LLC_HIT.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x3f803c0040",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the LLC",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.LLC_HIT.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x3f803c0010",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the LLC and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.LLC_HIT.HITM_OTHER_CORE",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x10003c0010",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the LLC and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.LLC_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x4003c0010",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the LLC and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.LLC_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x1003c0010",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the LLC and the snoops sent to sibling cores return clean response",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.LLC_HIT.SNOOP_MISS",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x2003c0010",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads that hit in the LLC",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_LLC_CODE_RD.LLC_HIT.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x3f803c0200",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts prefetch (that bring data to LLC only) data reads that hit in the LLC",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_LLC_DATA_RD.LLC_HIT.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x3f803c0080",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts prefetch (that bring data to LLC only) data reads that hit in the LLC and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_LLC_DATA_RD.LLC_HIT.HITM_OTHER_CORE",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x10003c0080",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts prefetch (that bring data to LLC only) data reads that hit in the LLC and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_LLC_DATA_RD.LLC_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x4003c0080",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts prefetch (that bring data to LLC only) data reads that hit in the LLC and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_LLC_DATA_RD.LLC_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x1003c0080",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts prefetch (that bring data to LLC only) data reads that hit in the LLC and the snoops sent to sibling cores return clean response",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_LLC_DATA_RD.LLC_HIT.SNOOP_MISS",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x2003c0080",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts requests where the address of an atomic lock instruction spans a cache line boundary or the lock instruction is executed on uncacheable address",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.SPLIT_LOCK_UC_LOCK.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x10400",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts non-temporal stores",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.STREAMING_STORES.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x10800",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Split locks in SQ",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xF4",
"EventName": "SQ_MISC.SPLIT_LOCK",
"SampleAfterValue": "100003",
diff --git a/tools/perf/pmu-events/arch/x86/ivytown/floating-point.json b/tools/perf/pmu-events/arch/x86/ivytown/floating-point.json
index 88891cba54ec..89c6d47cc077 100644
--- a/tools/perf/pmu-events/arch/x86/ivytown/floating-point.json
+++ b/tools/perf/pmu-events/arch/x86/ivytown/floating-point.json
@@ -1,8 +1,6 @@
[
{
"BriefDescription": "Cycles with any input/output SSE or FP assist",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"CounterMask": "1",
"EventCode": "0xCA",
"EventName": "FP_ASSIST.ANY",
@@ -12,8 +10,6 @@
},
{
"BriefDescription": "Number of SIMD FP assists due to input values",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xCA",
"EventName": "FP_ASSIST.SIMD_INPUT",
"PublicDescription": "Number of SIMD FP assists due to input values.",
@@ -22,8 +18,6 @@
},
{
"BriefDescription": "Number of SIMD FP assists due to Output values",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xCA",
"EventName": "FP_ASSIST.SIMD_OUTPUT",
"PublicDescription": "Number of SIMD FP assists due to output values.",
@@ -32,8 +26,6 @@
},
{
"BriefDescription": "Number of X87 assists due to input value.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xCA",
"EventName": "FP_ASSIST.X87_INPUT",
"PublicDescription": "Number of X87 FP assists due to input values.",
@@ -42,8 +34,6 @@
},
{
"BriefDescription": "Number of X87 assists due to output value.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xCA",
"EventName": "FP_ASSIST.X87_OUTPUT",
"PublicDescription": "Number of X87 FP assists due to output values.",
@@ -52,8 +42,6 @@
},
{
"BriefDescription": "Number of SSE* or AVX-128 FP Computational packed double-precision uops issued this cycle",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x10",
"EventName": "FP_COMP_OPS_EXE.SSE_PACKED_DOUBLE",
"PublicDescription": "Number of SSE* or AVX-128 FP Computational packed double-precision uops issued this cycle.",
@@ -62,8 +50,6 @@
},
{
"BriefDescription": "Number of SSE* or AVX-128 FP Computational packed single-precision uops issued this cycle",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x10",
"EventName": "FP_COMP_OPS_EXE.SSE_PACKED_SINGLE",
"PublicDescription": "Number of SSE* or AVX-128 FP Computational packed single-precision uops issued this cycle.",
@@ -72,8 +58,6 @@
},
{
"BriefDescription": "Number of SSE* or AVX-128 FP Computational scalar double-precision uops issued this cycle",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x10",
"EventName": "FP_COMP_OPS_EXE.SSE_SCALAR_DOUBLE",
"PublicDescription": "Counts number of SSE* or AVX-128 double precision FP scalar uops executed.",
@@ -82,8 +66,6 @@
},
{
"BriefDescription": "Number of SSE* or AVX-128 FP Computational scalar single-precision uops issued this cycle",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x10",
"EventName": "FP_COMP_OPS_EXE.SSE_SCALAR_SINGLE",
"PublicDescription": "Number of SSE* or AVX-128 FP Computational scalar single-precision uops issued this cycle.",
@@ -92,8 +74,6 @@
},
{
"BriefDescription": "Number of FP Computational Uops Executed this cycle. The number of FADD, FSUB, FCOM, FMULs, integer MULs and IMULs, FDIVs, FPREMs, FSQRTS, integer DIVs, and IDIVs. This event does not distinguish an FADD used in the middle of a transcendental flow from a s",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x10",
"EventName": "FP_COMP_OPS_EXE.X87",
"PublicDescription": "Counts number of X87 uops executed.",
@@ -102,8 +82,6 @@
},
{
"BriefDescription": "Number of SIMD Move Elimination candidate uops that were eliminated.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x58",
"EventName": "MOVE_ELIMINATION.SIMD_ELIMINATED",
"SampleAfterValue": "1000003",
@@ -111,8 +89,6 @@
},
{
"BriefDescription": "Number of SIMD Move Elimination candidate uops that were not eliminated.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x58",
"EventName": "MOVE_ELIMINATION.SIMD_NOT_ELIMINATED",
"SampleAfterValue": "1000003",
@@ -120,8 +96,6 @@
},
{
"BriefDescription": "Number of GSSE memory assist for stores. GSSE microcode assist is being invoked whenever the hardware is unable to properly handle GSSE-256b operations.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xC1",
"EventName": "OTHER_ASSISTS.AVX_STORE",
"PublicDescription": "Number of assists associated with 256-bit AVX store operations.",
@@ -130,8 +104,6 @@
},
{
"BriefDescription": "Number of transitions from AVX-256 to legacy SSE when penalty applicable.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xC1",
"EventName": "OTHER_ASSISTS.AVX_TO_SSE",
"SampleAfterValue": "100003",
@@ -139,8 +111,6 @@
},
{
"BriefDescription": "Number of transitions from SSE to AVX-256 when penalty applicable.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xC1",
"EventName": "OTHER_ASSISTS.SSE_TO_AVX",
"SampleAfterValue": "100003",
@@ -148,8 +118,6 @@
},
{
"BriefDescription": "number of AVX-256 Computational FP double precision uops issued this cycle",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x11",
"EventName": "SIMD_FP_256.PACKED_DOUBLE",
"PublicDescription": "Counts 256-bit packed double-precision floating-point instructions.",
@@ -158,8 +126,6 @@
},
{
"BriefDescription": "number of GSSE-256 Computational FP single precision uops issued this cycle",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x11",
"EventName": "SIMD_FP_256.PACKED_SINGLE",
"PublicDescription": "Counts 256-bit packed single-precision floating-point instructions.",
diff --git a/tools/perf/pmu-events/arch/x86/ivytown/frontend.json b/tools/perf/pmu-events/arch/x86/ivytown/frontend.json
index 0a295c4e093d..4ee100024ca9 100644
--- a/tools/perf/pmu-events/arch/x86/ivytown/frontend.json
+++ b/tools/perf/pmu-events/arch/x86/ivytown/frontend.json
@@ -1,8 +1,6 @@
[
{
"BriefDescription": "Counts the total number when the front end is resteered, mainly when the BPU cannot provide a correct prediction and this is corrected by other branch handling mechanisms at the front end.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xE6",
"EventName": "BACLEARS.ANY",
"PublicDescription": "Number of front end re-steers due to BPU misprediction.",
@@ -11,8 +9,6 @@
},
{
"BriefDescription": "Decode Stream Buffer (DSB)-to-MITE switches",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xAB",
"EventName": "DSB2MITE_SWITCHES.COUNT",
"PublicDescription": "Number of DSB to MITE switches.",
@@ -21,8 +17,6 @@
},
{
"BriefDescription": "Decode Stream Buffer (DSB)-to-MITE switch true penalty cycles",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xAB",
"EventName": "DSB2MITE_SWITCHES.PENALTY_CYCLES",
"PublicDescription": "Cycles DSB to MITE switches caused delay.",
@@ -31,8 +25,6 @@
},
{
"BriefDescription": "Cycles when Decode Stream Buffer (DSB) fill encounter more than 3 Decode Stream Buffer (DSB) lines",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xAC",
"EventName": "DSB_FILL.EXCEED_DSB_LINES",
"PublicDescription": "DSB Fill encountered > 3 DSB lines.",
@@ -41,8 +33,6 @@
},
{
"BriefDescription": "Number of Instruction Cache, Streaming Buffer and Victim Cache Reads. both cacheable and noncacheable, including UC fetches",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x80",
"EventName": "ICACHE.HIT",
"PublicDescription": "Number of Instruction Cache, Streaming Buffer and Victim Cache Reads. both cacheable and noncacheable, including UC fetches.",
@@ -51,8 +41,6 @@
},
{
"BriefDescription": "Cycles where a code-fetch stalled due to L1 instruction-cache miss or an iTLB miss",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x80",
"EventName": "ICACHE.IFETCH_STALL",
"PublicDescription": "Cycles where a code-fetch stalled due to L1 instruction-cache miss or an iTLB miss.",
@@ -61,8 +49,6 @@
},
{
"BriefDescription": "Instruction cache, streaming buffer and victim cache misses",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x80",
"EventName": "ICACHE.MISSES",
"PublicDescription": "Number of Instruction Cache, Streaming Buffer and Victim Cache Misses. Includes UC accesses.",
@@ -71,8 +57,6 @@
},
{
"BriefDescription": "Cycles Decode Stream Buffer (DSB) is delivering 4 Uops",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"CounterMask": "4",
"EventCode": "0x79",
"EventName": "IDQ.ALL_DSB_CYCLES_4_UOPS",
@@ -82,8 +66,6 @@
},
{
"BriefDescription": "Cycles Decode Stream Buffer (DSB) is delivering any Uop",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"CounterMask": "1",
"EventCode": "0x79",
"EventName": "IDQ.ALL_DSB_CYCLES_ANY_UOPS",
@@ -93,8 +75,6 @@
},
{
"BriefDescription": "Cycles MITE is delivering 4 Uops",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"CounterMask": "4",
"EventCode": "0x79",
"EventName": "IDQ.ALL_MITE_CYCLES_4_UOPS",
@@ -104,8 +84,6 @@
},
{
"BriefDescription": "Cycles MITE is delivering any Uop",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"CounterMask": "1",
"EventCode": "0x79",
"EventName": "IDQ.ALL_MITE_CYCLES_ANY_UOPS",
@@ -115,8 +93,6 @@
},
{
"BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) from Decode Stream Buffer (DSB) path",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"CounterMask": "1",
"EventCode": "0x79",
"EventName": "IDQ.DSB_CYCLES",
@@ -126,8 +102,6 @@
},
{
"BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x79",
"EventName": "IDQ.DSB_UOPS",
"PublicDescription": "Increment each cycle. # of uops delivered to IDQ from DSB path. Set Cmask = 1 to count cycles.",
@@ -136,8 +110,6 @@
},
{
"BriefDescription": "Instruction Decode Queue (IDQ) empty cycles",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0x79",
"EventName": "IDQ.EMPTY",
"PublicDescription": "Counts cycles the IDQ is empty.",
@@ -146,8 +118,6 @@
},
{
"BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from MITE path",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x79",
"EventName": "IDQ.MITE_ALL_UOPS",
"PublicDescription": "Number of uops delivered to IDQ from any path.",
@@ -156,8 +126,6 @@
},
{
"BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) from MITE path",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"CounterMask": "1",
"EventCode": "0x79",
"EventName": "IDQ.MITE_CYCLES",
@@ -167,8 +135,6 @@
},
{
"BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from MITE path",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x79",
"EventName": "IDQ.MITE_UOPS",
"PublicDescription": "Increment each cycle # of uops delivered to IDQ from MITE path. Set Cmask = 1 to count cycles.",
@@ -177,8 +143,6 @@
},
{
"BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequencer (MS) is busy",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"CounterMask": "1",
"EventCode": "0x79",
"EventName": "IDQ.MS_CYCLES",
@@ -188,8 +152,6 @@
},
{
"BriefDescription": "Cycles when uops initiated by Decode Stream Buffer (DSB) are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequencer (MS) is busy",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"CounterMask": "1",
"EventCode": "0x79",
"EventName": "IDQ.MS_DSB_CYCLES",
@@ -199,8 +161,6 @@
},
{
"BriefDescription": "Deliveries to Instruction Decode Queue (IDQ) initiated by Decode Stream Buffer (DSB) while Microcode Sequencer (MS) is busy",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"CounterMask": "1",
"EdgeDetect": "1",
"EventCode": "0x79",
@@ -211,8 +171,6 @@
},
{
"BriefDescription": "Uops initiated by Decode Stream Buffer (DSB) that are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequencer (MS) is busy",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x79",
"EventName": "IDQ.MS_DSB_UOPS",
"PublicDescription": "Increment each cycle # of uops delivered to IDQ when MS_busy by DSB. Set Cmask = 1 to count cycles. Add Edge=1 to count # of delivery.",
@@ -221,8 +179,6 @@
},
{
"BriefDescription": "Uops initiated by MITE and delivered to Instruction Decode Queue (IDQ) while Microcode Sequencer (MS) is busy",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x79",
"EventName": "IDQ.MS_MITE_UOPS",
"PublicDescription": "Increment each cycle # of uops delivered to IDQ when MS_busy by MITE. Set Cmask = 1 to count cycles.",
@@ -231,8 +187,6 @@
},
{
"BriefDescription": "Number of switches from DSB (Decode Stream Buffer) or MITE (legacy decode pipeline) to the Microcode Sequencer",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"CounterMask": "1",
"EdgeDetect": "1",
"EventCode": "0x79",
@@ -243,8 +197,6 @@
},
{
"BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) while Microcode Sequencer (MS) is busy",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x79",
"EventName": "IDQ.MS_UOPS",
"PublicDescription": "Increment each cycle # of uops delivered to IDQ from MS by either DSB or MITE. Set Cmask = 1 to count cycles.",
@@ -253,8 +205,6 @@
},
{
"BriefDescription": "Uops not delivered to Resource Allocation Table (RAT) per thread when backend of the machine is not stalled",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0x9C",
"EventName": "IDQ_UOPS_NOT_DELIVERED.CORE",
"PublicDescription": "Count issue pipeline slots where no uop was delivered from the front end to the back end when there is no back-end stall.",
@@ -263,8 +213,6 @@
},
{
"BriefDescription": "Cycles per thread when 4 or more uops are not delivered to Resource Allocation Table (RAT) when backend of the machine is not stalled.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"CounterMask": "4",
"EventCode": "0x9C",
"EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE",
@@ -273,8 +221,6 @@
},
{
"BriefDescription": "Counts cycles FE delivered 4 uops or Resource Allocation Table (RAT) was stalling FE.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"CounterMask": "1",
"EventCode": "0x9C",
"EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_FE_WAS_OK",
@@ -284,8 +230,6 @@
},
{
"BriefDescription": "Cycles per thread when 3 or more uops are not delivered to Resource Allocation Table (RAT) when backend of the machine is not stalled.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"CounterMask": "3",
"EventCode": "0x9C",
"EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_LE_1_UOP_DELIV.CORE",
@@ -294,8 +238,6 @@
},
{
"BriefDescription": "Cycles with less than 2 uops delivered by the front end.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"CounterMask": "2",
"EventCode": "0x9C",
"EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_LE_2_UOP_DELIV.CORE",
@@ -304,8 +246,6 @@
},
{
"BriefDescription": "Cycles with less than 3 uops delivered by the front end.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"CounterMask": "1",
"EventCode": "0x9C",
"EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_LE_3_UOP_DELIV.CORE",
diff --git a/tools/perf/pmu-events/arch/x86/ivytown/ivt-metrics.json b/tools/perf/pmu-events/arch/x86/ivytown/ivt-metrics.json
index 99a45c8d8cee..80444bc4e66e 100644
--- a/tools/perf/pmu-events/arch/x86/ivytown/ivt-metrics.json
+++ b/tools/perf/pmu-events/arch/x86/ivytown/ivt-metrics.json
@@ -88,7 +88,7 @@
},
{
"BriefDescription": "This category represents fraction of slots wasted due to incorrect speculations",
- "MetricExpr": "(UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * ((INT_MISC.RECOVERY_CYCLES_ANY / 2) if #SMT_on else INT_MISC.RECOVERY_CYCLES)) / SLOTS",
+ "MetricExpr": "(UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * (INT_MISC.RECOVERY_CYCLES_ANY / 2 if #SMT_on else INT_MISC.RECOVERY_CYCLES)) / SLOTS",
"MetricGroup": "TopdownL1;tma_L1_group",
"MetricName": "tma_bad_speculation",
"PublicDescription": "This category represents fraction of slots wasted due to incorrect speculations. This include slots used to issue uops that do not eventually get retired and slots for which the issue-pipeline was blocked due to recovery from earlier incorrect speculation. For example; wasted work due to miss-predicted branches are categorized under Bad Speculation category. Incorrect data speculation followed by Memory Ordering Nukes is another example.",
@@ -96,7 +96,7 @@
},
{
"BriefDescription": "This metric represents fraction of slots the CPU has wasted due to Branch Misprediction",
- "MetricExpr": "(BR_MISP_RETIRED.ALL_BRANCHES / (BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT)) * tma_bad_speculation",
+ "MetricExpr": "BR_MISP_RETIRED.ALL_BRANCHES / (BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT) * tma_bad_speculation",
"MetricGroup": "BadSpec;BrMispredicts;TopdownL2;tma_L2_group;tma_bad_speculation_group",
"MetricName": "tma_branch_mispredicts",
"PublicDescription": "This metric represents fraction of slots the CPU has wasted due to Branch Misprediction. These slots are either wasted by uops fetched from an incorrectly speculated program path; or stalls when the out-of-order part of the machine needs to recover its state from a speculative path. Sample with: BR_MISP_RETIRED.ALL_BRANCHES",
@@ -120,7 +120,7 @@
},
{
"BriefDescription": "This metric represents fraction of slots the Memory subsystem within the Backend was a bottleneck",
- "MetricExpr": "((min(CPU_CLK_UNHALTED.THREAD, CYCLE_ACTIVITY.STALLS_LDM_PENDING) + RESOURCE_STALLS.SB) / (min(CPU_CLK_UNHALTED.THREAD, CYCLE_ACTIVITY.CYCLES_NO_EXECUTE) + UOPS_EXECUTED.CYCLES_GE_1_UOP_EXEC - UOPS_EXECUTED.CYCLES_GE_3_UOPS_EXEC if (IPC > 1.8) else UOPS_EXECUTED.CYCLES_GE_2_UOPS_EXEC - RS_EVENTS.EMPTY_CYCLES if (tma_fetch_latency > 0.1) else RESOURCE_STALLS.SB)) * tma_backend_bound",
+ "MetricExpr": "(min(CPU_CLK_UNHALTED.THREAD, CYCLE_ACTIVITY.STALLS_LDM_PENDING) + RESOURCE_STALLS.SB) / (min(CPU_CLK_UNHALTED.THREAD, CYCLE_ACTIVITY.CYCLES_NO_EXECUTE) + UOPS_EXECUTED.CYCLES_GE_1_UOP_EXEC - UOPS_EXECUTED.CYCLES_GE_3_UOPS_EXEC if IPC > 1.8 else (UOPS_EXECUTED.CYCLES_GE_2_UOPS_EXEC - RS_EVENTS.EMPTY_CYCLES if tma_fetch_latency > 0.1 else RESOURCE_STALLS.SB)) * tma_backend_bound",
"MetricGroup": "Backend;TopdownL2;tma_L2_group;tma_backend_bound_group",
"MetricName": "tma_memory_bound",
"PublicDescription": "This metric represents fraction of slots the Memory subsystem within the Backend was a bottleneck. Memory Bound estimates fraction of slots where pipeline is likely stalled due to demand load or store instructions. This accounts mainly for (1) non-completed in-flight memory demand loads which coincides with execution units starvation; in addition to (2) cases where stores could impose backpressure on the pipeline when many of them get buffered at the same time (less common out of the two).",
@@ -152,7 +152,7 @@
},
{
"BriefDescription": "This metric represents fraction of cycles the CPU spent handling cache misses due to lock operations",
- "MetricExpr": "(MEM_UOPS_RETIRED.LOCK_LOADS / MEM_UOPS_RETIRED.ALL_STORES) * min(CPU_CLK_UNHALTED.THREAD, OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_RFO) / CLKS",
+ "MetricExpr": "MEM_UOPS_RETIRED.LOCK_LOADS / MEM_UOPS_RETIRED.ALL_STORES * min(CPU_CLK_UNHALTED.THREAD, OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_RFO) / CLKS",
"MetricGroup": "Offcore;TopdownL4;tma_l1_bound_group",
"MetricName": "tma_lock_latency",
"PublicDescription": "This metric represents fraction of cycles the CPU spent handling cache misses due to lock operations. Due to the microarchitecture handling of locks; they are classified as L1_Bound regardless of what memory source satisfied them. Sample with: MEM_UOPS_RETIRED.LOCK_LOADS_PS",
@@ -192,7 +192,7 @@
},
{
"BriefDescription": "This metric estimates how often the CPU was stalled due to loads accesses to L3 cache or contended with a sibling Core",
- "MetricExpr": "(MEM_LOAD_UOPS_RETIRED.LLC_HIT / (MEM_LOAD_UOPS_RETIRED.LLC_HIT + 7 * MEM_LOAD_UOPS_RETIRED.LLC_MISS)) * CYCLE_ACTIVITY.STALLS_L2_PENDING / CLKS",
+ "MetricExpr": "MEM_LOAD_UOPS_RETIRED.LLC_HIT / (MEM_LOAD_UOPS_RETIRED.LLC_HIT + 7 * MEM_LOAD_UOPS_RETIRED.LLC_MISS) * CYCLE_ACTIVITY.STALLS_L2_PENDING / CLKS",
"MetricGroup": "CacheMisses;MemoryBound;TmaL3mem;TopdownL3;tma_memory_bound_group",
"MetricName": "tma_l3_bound",
"PublicDescription": "This metric estimates how often the CPU was stalled due to loads accesses to L3 cache or contended with a sibling Core. Avoiding cache misses (i.e. L2 misses/L3 hits) can improve the latency and increase performance. Sample with: MEM_LOAD_UOPS_RETIRED.L3_HIT_PS",
@@ -200,7 +200,7 @@
},
{
"BriefDescription": "This metric estimates fraction of cycles while the memory subsystem was handling synchronizations due to contested accesses",
- "MetricExpr": "(60 * (MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HITM * (1 + mem_load_uops_retired.hit_lfb / ((MEM_LOAD_UOPS_RETIRED.L2_HIT + MEM_LOAD_UOPS_RETIRED.LLC_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HITM + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_MISS) + MEM_LOAD_UOPS_LLC_MISS_RETIRED.LOCAL_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_HITM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_FWD))) + 43 * (MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_MISS * (1 + mem_load_uops_retired.hit_lfb / ((MEM_LOAD_UOPS_RETIRED.L2_HIT + MEM_LOAD_UOPS_RETIRED.LLC_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HITM + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_MISS) + MEM_LOAD_UOPS_LLC_MISS_RETIRED.LOCAL_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_HITM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_FWD)))) / CLKS",
+ "MetricExpr": "(60 * (MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HITM * (1 + MEM_LOAD_UOPS_RETIRED.HIT_LFB / (MEM_LOAD_UOPS_RETIRED.L2_HIT + MEM_LOAD_UOPS_RETIRED.LLC_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HITM + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_MISS + MEM_LOAD_UOPS_LLC_MISS_RETIRED.LOCAL_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_HITM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_FWD))) + 43 * (MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_MISS * (1 + MEM_LOAD_UOPS_RETIRED.HIT_LFB / (MEM_LOAD_UOPS_RETIRED.L2_HIT + MEM_LOAD_UOPS_RETIRED.LLC_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HITM + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_MISS + MEM_LOAD_UOPS_LLC_MISS_RETIRED.LOCAL_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_HITM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_FWD)))) / CLKS",
"MetricGroup": "DataSharing;Offcore;Snoop;TopdownL4;tma_l3_bound_group",
"MetricName": "tma_contested_accesses",
"PublicDescription": "This metric estimates fraction of cycles while the memory subsystem was handling synchronizations due to contested accesses. Contested accesses occur when data written by one Logical Processor are read by another Logical Processor on a different Physical Core. Examples of contested accesses include synchronizations such as locks; true data sharing such as modified locked variables; and false sharing. Sample with: MEM_LOAD_L3_HIT_RETIRED.XSNP_HITM_PS;MEM_LOAD_L3_HIT_RETIRED.XSNP_MISS_PS",
@@ -208,7 +208,7 @@
},
{
"BriefDescription": "This metric estimates fraction of cycles while the memory subsystem was handling synchronizations due to data-sharing accesses",
- "MetricExpr": "43 * (MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HIT * (1 + mem_load_uops_retired.hit_lfb / ((MEM_LOAD_UOPS_RETIRED.L2_HIT + MEM_LOAD_UOPS_RETIRED.LLC_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HITM + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_MISS) + MEM_LOAD_UOPS_LLC_MISS_RETIRED.LOCAL_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_HITM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_FWD))) / CLKS",
+ "MetricExpr": "43 * (MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HIT * (1 + MEM_LOAD_UOPS_RETIRED.HIT_LFB / (MEM_LOAD_UOPS_RETIRED.L2_HIT + MEM_LOAD_UOPS_RETIRED.LLC_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HITM + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_MISS + MEM_LOAD_UOPS_LLC_MISS_RETIRED.LOCAL_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_HITM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_FWD))) / CLKS",
"MetricGroup": "Offcore;Snoop;TopdownL4;tma_l3_bound_group",
"MetricName": "tma_data_sharing",
"PublicDescription": "This metric estimates fraction of cycles while the memory subsystem was handling synchronizations due to data-sharing accesses. Data shared by multiple Logical Processors (even just read shared) may cause increased access latency due to cache coherency. Excessive data sharing can drastically harm multithreaded performance. Sample with: MEM_LOAD_L3_HIT_RETIRED.XSNP_HIT_PS",
@@ -216,7 +216,7 @@
},
{
"BriefDescription": "This metric represents fraction of cycles with demand load accesses that hit the L3 cache under unloaded scenarios (possibly L3 latency limited)",
- "MetricExpr": "41 * (MEM_LOAD_UOPS_RETIRED.LLC_HIT * (1 + mem_load_uops_retired.hit_lfb / ((MEM_LOAD_UOPS_RETIRED.L2_HIT + MEM_LOAD_UOPS_RETIRED.LLC_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HITM + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_MISS) + MEM_LOAD_UOPS_LLC_MISS_RETIRED.LOCAL_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_HITM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_FWD))) / CLKS",
+ "MetricExpr": "41 * (MEM_LOAD_UOPS_RETIRED.LLC_HIT * (1 + MEM_LOAD_UOPS_RETIRED.HIT_LFB / (MEM_LOAD_UOPS_RETIRED.L2_HIT + MEM_LOAD_UOPS_RETIRED.LLC_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HITM + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_MISS + MEM_LOAD_UOPS_LLC_MISS_RETIRED.LOCAL_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_HITM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_FWD))) / CLKS",
"MetricGroup": "MemoryLat;TopdownL4;tma_l3_bound_group",
"MetricName": "tma_l3_hit_latency",
"PublicDescription": "This metric represents fraction of cycles with demand load accesses that hit the L3 cache under unloaded scenarios (possibly L3 latency limited). Avoiding private cache misses (i.e. L2 misses/L3 hits) will improve the latency; reduce contention with sibling physical cores and increase performance. Note the value of this node may overlap with its siblings. Sample with: MEM_LOAD_UOPS_RETIRED.L3_HIT_PS",
@@ -224,7 +224,7 @@
},
{
"BriefDescription": "This metric measures fraction of cycles where the Super Queue (SQ) was full taking into account all request-types and both hardware SMT threads (Logical Processors)",
- "MetricExpr": "((OFFCORE_REQUESTS_BUFFER.SQ_FULL / 2) if #SMT_on else OFFCORE_REQUESTS_BUFFER.SQ_FULL) / CORE_CLKS",
+ "MetricExpr": "(OFFCORE_REQUESTS_BUFFER.SQ_FULL / 2 if #SMT_on else OFFCORE_REQUESTS_BUFFER.SQ_FULL) / CORE_CLKS",
"MetricGroup": "MemoryBW;Offcore;TopdownL4;tma_l3_bound_group",
"MetricName": "tma_sq_full",
"PublicDescription": "This metric measures fraction of cycles where the Super Queue (SQ) was full taking into account all request-types and both hardware SMT threads (Logical Processors). The Super Queue is used for requests to access the L2 cache or to go out to the Uncore.",
@@ -232,7 +232,7 @@
},
{
"BriefDescription": "This metric estimates how often the CPU was stalled on accesses to external memory (DRAM) by loads",
- "MetricExpr": "(1 - (MEM_LOAD_UOPS_RETIRED.LLC_HIT / (MEM_LOAD_UOPS_RETIRED.LLC_HIT + 7 * MEM_LOAD_UOPS_RETIRED.LLC_MISS))) * CYCLE_ACTIVITY.STALLS_L2_PENDING / CLKS",
+ "MetricExpr": "(1 - MEM_LOAD_UOPS_RETIRED.LLC_HIT / (MEM_LOAD_UOPS_RETIRED.LLC_HIT + 7 * MEM_LOAD_UOPS_RETIRED.LLC_MISS)) * CYCLE_ACTIVITY.STALLS_L2_PENDING / CLKS",
"MetricGroup": "MemoryBound;TmaL3mem;TopdownL3;tma_memory_bound_group",
"MetricName": "tma_dram_bound",
"PublicDescription": "This metric estimates how often the CPU was stalled on accesses to external memory (DRAM) by loads. Better caching can improve the latency and increase performance. Sample with: MEM_LOAD_UOPS_RETIRED.L3_MISS_PS",
@@ -256,7 +256,7 @@
},
{
"BriefDescription": "This metric estimates fraction of cycles while the memory subsystem was handling loads from local memory",
- "MetricExpr": "200 * (MEM_LOAD_UOPS_LLC_MISS_RETIRED.LOCAL_DRAM * (1 + mem_load_uops_retired.hit_lfb / ((MEM_LOAD_UOPS_RETIRED.L2_HIT + MEM_LOAD_UOPS_RETIRED.LLC_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HITM + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_MISS) + MEM_LOAD_UOPS_LLC_MISS_RETIRED.LOCAL_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_HITM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_FWD))) / CLKS",
+ "MetricExpr": "200 * (MEM_LOAD_UOPS_LLC_MISS_RETIRED.LOCAL_DRAM * (1 + MEM_LOAD_UOPS_RETIRED.HIT_LFB / (MEM_LOAD_UOPS_RETIRED.L2_HIT + MEM_LOAD_UOPS_RETIRED.LLC_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HITM + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_MISS + MEM_LOAD_UOPS_LLC_MISS_RETIRED.LOCAL_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_HITM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_FWD))) / CLKS",
"MetricGroup": "Server;TopdownL5;tma_mem_latency_group",
"MetricName": "tma_local_dram",
"PublicDescription": "This metric estimates fraction of cycles while the memory subsystem was handling loads from local memory. Caching will improve the latency and increase performance. Sample with: MEM_LOAD_UOPS_L3_MISS_RETIRED.LOCAL_DRAM_PS",
@@ -264,7 +264,7 @@
},
{
"BriefDescription": "This metric estimates fraction of cycles while the memory subsystem was handling loads from remote memory",
- "MetricExpr": "310 * (MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_DRAM * (1 + mem_load_uops_retired.hit_lfb / ((MEM_LOAD_UOPS_RETIRED.L2_HIT + MEM_LOAD_UOPS_RETIRED.LLC_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HITM + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_MISS) + MEM_LOAD_UOPS_LLC_MISS_RETIRED.LOCAL_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_HITM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_FWD))) / CLKS",
+ "MetricExpr": "310 * (MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_DRAM * (1 + MEM_LOAD_UOPS_RETIRED.HIT_LFB / (MEM_LOAD_UOPS_RETIRED.L2_HIT + MEM_LOAD_UOPS_RETIRED.LLC_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HITM + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_MISS + MEM_LOAD_UOPS_LLC_MISS_RETIRED.LOCAL_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_HITM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_FWD))) / CLKS",
"MetricGroup": "Server;Snoop;TopdownL5;tma_mem_latency_group",
"MetricName": "tma_remote_dram",
"PublicDescription": "This metric estimates fraction of cycles while the memory subsystem was handling loads from remote memory. This is caused often due to non-optimal NUMA allocations. #link to NUMA article Sample with: MEM_LOAD_UOPS_L3_MISS_RETIRED.REMOTE_DRAM_PS",
@@ -272,7 +272,7 @@
},
{
"BriefDescription": "This metric estimates fraction of cycles while the memory subsystem was handling loads from remote cache in other sockets including synchronizations issues",
- "MetricExpr": "(200 * (MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_HITM * (1 + mem_load_uops_retired.hit_lfb / ((MEM_LOAD_UOPS_RETIRED.L2_HIT + MEM_LOAD_UOPS_RETIRED.LLC_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HITM + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_MISS) + MEM_LOAD_UOPS_LLC_MISS_RETIRED.LOCAL_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_HITM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_FWD))) + 180 * (MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_FWD * (1 + mem_load_uops_retired.hit_lfb / ((MEM_LOAD_UOPS_RETIRED.L2_HIT + MEM_LOAD_UOPS_RETIRED.LLC_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HITM + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_MISS) + MEM_LOAD_UOPS_LLC_MISS_RETIRED.LOCAL_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_HITM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_FWD)))) / CLKS",
+ "MetricExpr": "(200 * (MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_HITM * (1 + MEM_LOAD_UOPS_RETIRED.HIT_LFB / (MEM_LOAD_UOPS_RETIRED.L2_HIT + MEM_LOAD_UOPS_RETIRED.LLC_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HITM + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_MISS + MEM_LOAD_UOPS_LLC_MISS_RETIRED.LOCAL_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_HITM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_FWD))) + 180 * (MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_FWD * (1 + MEM_LOAD_UOPS_RETIRED.HIT_LFB / (MEM_LOAD_UOPS_RETIRED.L2_HIT + MEM_LOAD_UOPS_RETIRED.LLC_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HITM + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_MISS + MEM_LOAD_UOPS_LLC_MISS_RETIRED.LOCAL_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_HITM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_FWD)))) / CLKS",
"MetricGroup": "Offcore;Server;Snoop;TopdownL5;tma_mem_latency_group",
"MetricName": "tma_remote_cache",
"PublicDescription": "This metric estimates fraction of cycles while the memory subsystem was handling loads from remote cache in other sockets including synchronizations issues. This is caused often due to non-optimal NUMA allocations. #link to NUMA article Sample with: MEM_LOAD_UOPS_L3_MISS_RETIRED.REMOTE_HITM_PS;MEM_LOAD_UOPS_L3_MISS_RETIRED.REMOTE_FWD_PS",
@@ -288,7 +288,7 @@
},
{
"BriefDescription": "This metric estimates fraction of cycles the CPU spent handling L1D store misses",
- "MetricExpr": "((L2_RQSTS.RFO_HIT * 9 * (1 - (MEM_UOPS_RETIRED.LOCK_LOADS / MEM_UOPS_RETIRED.ALL_STORES))) + (1 - (MEM_UOPS_RETIRED.LOCK_LOADS / MEM_UOPS_RETIRED.ALL_STORES)) * min(CPU_CLK_UNHALTED.THREAD, OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_RFO)) / CLKS",
+ "MetricExpr": "(L2_RQSTS.RFO_HIT * 9 * (1 - MEM_UOPS_RETIRED.LOCK_LOADS / MEM_UOPS_RETIRED.ALL_STORES) + (1 - MEM_UOPS_RETIRED.LOCK_LOADS / MEM_UOPS_RETIRED.ALL_STORES) * min(CPU_CLK_UNHALTED.THREAD, OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_RFO)) / CLKS",
"MetricGroup": "MemoryLat;Offcore;TopdownL4;tma_store_bound_group",
"MetricName": "tma_store_latency",
"PublicDescription": "This metric estimates fraction of cycles the CPU spent handling L1D store misses. Store accesses usually less impact out-of-order core performance; however; holding resources for longer time can lead into undesired implications (e.g. contention on L1D fill-buffer entries - see FB_Full)",
@@ -336,7 +336,7 @@
},
{
"BriefDescription": "This metric estimates fraction of cycles the CPU performance was potentially limited due to Core computation issues (non divider-related)",
- "MetricExpr": "((min(CPU_CLK_UNHALTED.THREAD, CYCLE_ACTIVITY.CYCLES_NO_EXECUTE) + UOPS_EXECUTED.CYCLES_GE_1_UOP_EXEC - UOPS_EXECUTED.CYCLES_GE_3_UOPS_EXEC if (IPC > 1.8) else UOPS_EXECUTED.CYCLES_GE_2_UOPS_EXEC - RS_EVENTS.EMPTY_CYCLES if (tma_fetch_latency > 0.1) else RESOURCE_STALLS.SB) - RESOURCE_STALLS.SB - min(CPU_CLK_UNHALTED.THREAD, CYCLE_ACTIVITY.STALLS_LDM_PENDING)) / CLKS",
+ "MetricExpr": "((min(CPU_CLK_UNHALTED.THREAD, CYCLE_ACTIVITY.CYCLES_NO_EXECUTE) + UOPS_EXECUTED.CYCLES_GE_1_UOP_EXEC - UOPS_EXECUTED.CYCLES_GE_3_UOPS_EXEC if IPC > 1.8 else (UOPS_EXECUTED.CYCLES_GE_2_UOPS_EXEC - RS_EVENTS.EMPTY_CYCLES if tma_fetch_latency > 0.1 else RESOURCE_STALLS.SB)) - RESOURCE_STALLS.SB - min(CPU_CLK_UNHALTED.THREAD, CYCLE_ACTIVITY.STALLS_LDM_PENDING)) / CLKS",
"MetricGroup": "PortsUtil;TopdownL3;tma_core_bound_group",
"MetricName": "tma_ports_utilization",
"PublicDescription": "This metric estimates fraction of cycles the CPU performance was potentially limited due to Core computation issues (non divider-related). Two distinct categories can be attributed into this metric: (1) heavy data-dependency among contiguous instructions would manifest in this metric - such cases are often referred to as low Instruction Level Parallelism (ILP). (2) Contention on some hardware execution unit other than Divider. For example; when there are too many multiply operations.",
@@ -344,7 +344,7 @@
},
{
"BriefDescription": "This metric represents fraction of cycles CPU executed no uops on any execution port (Logical Processor cycles since ICL, Physical Core cycles otherwise)",
- "MetricExpr": "(cpu@...S_EXECUTED.CORE\\,inv\\,cmask\\=1@) / 2 if #SMT_on else (min(CPU_CLK_UNHALTED.THREAD, CYCLE_ACTIVITY.CYCLES_NO_EXECUTE) - RS_EVENTS.EMPTY_CYCLES if (tma_fetch_latency > 0.1) else 0) / CORE_CLKS",
+ "MetricExpr": "(cpu@...S_EXECUTED.CORE\\,inv\\,cmask\\=1@ / 2 if #SMT_on else (min(CPU_CLK_UNHALTED.THREAD, CYCLE_ACTIVITY.CYCLES_NO_EXECUTE) - RS_EVENTS.EMPTY_CYCLES if tma_fetch_latency > 0.1 else 0) / CORE_CLKS)",
"MetricGroup": "PortsUtil;TopdownL4;tma_ports_utilization_group",
"MetricName": "tma_ports_utilized_0",
"PublicDescription": "This metric represents fraction of cycles CPU executed no uops on any execution port (Logical Processor cycles since ICL, Physical Core cycles otherwise). Long-latency instructions like divides may contribute to this metric.",
@@ -352,7 +352,7 @@
},
{
"BriefDescription": "This metric represents fraction of cycles where the CPU executed total of 1 uop per cycle on all execution ports (Logical Processor cycles since ICL, Physical Core cycles otherwise)",
- "MetricExpr": "(cpu@...S_EXECUTED.CORE\\,cmask\\=1@ - cpu@...S_EXECUTED.CORE\\,cmask\\=2@) / 2 if #SMT_on else (UOPS_EXECUTED.CYCLES_GE_1_UOP_EXEC - UOPS_EXECUTED.CYCLES_GE_2_UOPS_EXEC) / CORE_CLKS",
+ "MetricExpr": "((cpu@...S_EXECUTED.CORE\\,cmask\\=1@ - cpu@...S_EXECUTED.CORE\\,cmask\\=2@) / 2 if #SMT_on else (UOPS_EXECUTED.CYCLES_GE_1_UOP_EXEC - UOPS_EXECUTED.CYCLES_GE_2_UOPS_EXEC) / CORE_CLKS)",
"MetricGroup": "PortsUtil;TopdownL4;tma_ports_utilization_group",
"MetricName": "tma_ports_utilized_1",
"PublicDescription": "This metric represents fraction of cycles where the CPU executed total of 1 uop per cycle on all execution ports (Logical Processor cycles since ICL, Physical Core cycles otherwise). This can be due to heavy data-dependency among software instructions; or over oversubscribing a particular hardware resource. In some other cases with high 1_Port_Utilized and L1_Bound; this metric can point to L1 data-cache latency bottleneck that may not necessarily manifest with complete execution starvation (due to the short L1 latency e.g. walking a linked list) - looking at the assembly can be helpful.",
@@ -360,7 +360,7 @@
},
{
"BriefDescription": "This metric represents fraction of cycles CPU executed total of 2 uops per cycle on all execution ports (Logical Processor cycles since ICL, Physical Core cycles otherwise)",
- "MetricExpr": "(cpu@...S_EXECUTED.CORE\\,cmask\\=2@ - cpu@...S_EXECUTED.CORE\\,cmask\\=3@) / 2 if #SMT_on else (UOPS_EXECUTED.CYCLES_GE_2_UOPS_EXEC - UOPS_EXECUTED.CYCLES_GE_3_UOPS_EXEC) / CORE_CLKS",
+ "MetricExpr": "((cpu@...S_EXECUTED.CORE\\,cmask\\=2@ - cpu@...S_EXECUTED.CORE\\,cmask\\=3@) / 2 if #SMT_on else (UOPS_EXECUTED.CYCLES_GE_2_UOPS_EXEC - UOPS_EXECUTED.CYCLES_GE_3_UOPS_EXEC) / CORE_CLKS)",
"MetricGroup": "PortsUtil;TopdownL4;tma_ports_utilization_group",
"MetricName": "tma_ports_utilized_2",
"PublicDescription": "This metric represents fraction of cycles CPU executed total of 2 uops per cycle on all execution ports (Logical Processor cycles since ICL, Physical Core cycles otherwise). Loop Vectorization -most compilers feature auto-Vectorization options today- reduces pressure on the execution ports as multiple elements are calculated with same uop.",
@@ -368,7 +368,7 @@
},
{
"BriefDescription": "This metric represents fraction of cycles CPU executed total of 3 or more uops per cycle on all execution ports (Logical Processor cycles since ICL, Physical Core cycles otherwise).",
- "MetricExpr": "((cpu@...S_EXECUTED.CORE\\,cmask\\=3@ / 2) if #SMT_on else UOPS_EXECUTED.CYCLES_GE_3_UOPS_EXEC) / CORE_CLKS",
+ "MetricExpr": "(cpu@...S_EXECUTED.CORE\\,cmask\\=3@ / 2 if #SMT_on else UOPS_EXECUTED.CYCLES_GE_3_UOPS_EXEC) / CORE_CLKS",
"MetricGroup": "PortsUtil;TopdownL4;tma_ports_utilization_group",
"MetricName": "tma_ports_utilized_3m",
"ScaleUnit": "100%"
@@ -424,7 +424,7 @@
},
{
"BriefDescription": "This metric represents Core fraction of cycles CPU dispatched uops on execution port for Store operations",
- "MetricExpr": "UOPS_DISPATCHED_PORT.PORT_4 / CORE_CLKS",
+ "MetricExpr": "tma_port_4",
"MetricGroup": "TopdownL5;tma_ports_utilized_3m_group",
"MetricName": "tma_store_op_utilization",
"ScaleUnit": "100%"
@@ -494,7 +494,7 @@
},
{
"BriefDescription": "This metric represents fraction of slots the CPU was retiring uops fetched by the Microcode Sequencer (MS) unit",
- "MetricExpr": "(UOPS_RETIRED.RETIRE_SLOTS / UOPS_ISSUED.ANY) * IDQ.MS_UOPS / SLOTS",
+ "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / UOPS_ISSUED.ANY * IDQ.MS_UOPS / SLOTS",
"MetricGroup": "MicroSeq;TopdownL3;tma_heavy_operations_group",
"MetricName": "tma_microcode_sequencer",
"PublicDescription": "This metric represents fraction of slots the CPU was retiring uops fetched by the Microcode Sequencer (MS) unit. The MS is used for CISC instructions not supported by the default decoders (like repeat move strings; or CPUID); or by microcode assists used to address some operation modes (like in Floating Point assists). These cases can often be avoided. Sample with: IDQ.MS_UOPS",
@@ -567,19 +567,19 @@
},
{
"BriefDescription": "Floating Point Operations Per Cycle",
- "MetricExpr": "(1 * (FP_COMP_OPS_EXE.SSE_SCALAR_SINGLE + FP_COMP_OPS_EXE.SSE_SCALAR_DOUBLE) + 2 * FP_COMP_OPS_EXE.SSE_PACKED_DOUBLE + 4 * (FP_COMP_OPS_EXE.SSE_PACKED_SINGLE + SIMD_FP_256.PACKED_DOUBLE) + 8 * SIMD_FP_256.PACKED_SINGLE) / CORE_CLKS",
+ "MetricExpr": "(FP_COMP_OPS_EXE.SSE_SCALAR_SINGLE + FP_COMP_OPS_EXE.SSE_SCALAR_DOUBLE + 2 * FP_COMP_OPS_EXE.SSE_PACKED_DOUBLE + 4 * (FP_COMP_OPS_EXE.SSE_PACKED_SINGLE + SIMD_FP_256.PACKED_DOUBLE) + 8 * SIMD_FP_256.PACKED_SINGLE) / CORE_CLKS",
"MetricGroup": "Flops;Ret",
"MetricName": "FLOPc"
},
{
"BriefDescription": "Instruction-Level-Parallelism (average number of uops executed when there is execution) per-core",
- "MetricExpr": "UOPS_EXECUTED.THREAD / ((cpu@...S_EXECUTED.CORE\\,cmask\\=1@ / 2) if #SMT_on else UOPS_EXECUTED.CYCLES_GE_1_UOP_EXEC)",
+ "MetricExpr": "UOPS_EXECUTED.THREAD / (cpu@...S_EXECUTED.CORE\\,cmask\\=1@ / 2 if #SMT_on else UOPS_EXECUTED.CYCLES_GE_1_UOP_EXEC)",
"MetricGroup": "Backend;Cor;Pipeline;PortsUtil",
"MetricName": "ILP"
},
{
"BriefDescription": "Core actual clocks when any Logical Processor is active on the Physical Core",
- "MetricExpr": "((CPU_CLK_UNHALTED.THREAD / 2) * (1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK)) if #core_wide < 1 else (CPU_CLK_UNHALTED.THREAD_ANY / 2) if #SMT_on else CLKS",
+ "MetricExpr": "(CPU_CLK_UNHALTED.THREAD / 2 * (1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK) if #core_wide < 1 else (CPU_CLK_UNHALTED.THREAD_ANY / 2 if #SMT_on else CLKS))",
"MetricGroup": "SMT",
"MetricName": "CORE_CLKS"
},
@@ -646,7 +646,7 @@
},
{
"BriefDescription": "Fraction of Uops delivered by the DSB (aka Decoded ICache; or Uop Cache)",
- "MetricExpr": "IDQ.DSB_UOPS / ((IDQ.DSB_UOPS + LSD.UOPS + IDQ.MITE_UOPS + IDQ.MS_UOPS))",
+ "MetricExpr": "IDQ.DSB_UOPS / (IDQ.DSB_UOPS + LSD.UOPS + IDQ.MITE_UOPS + IDQ.MS_UOPS)",
"MetricGroup": "DSB;Fed;FetchBW",
"MetricName": "DSB_Coverage"
},
@@ -658,7 +658,7 @@
},
{
"BriefDescription": "Actual Average Latency for L1 data-cache miss demand load operations (in core cycles)",
- "MetricExpr": "L1D_PEND_MISS.PENDING / (MEM_LOAD_UOPS_RETIRED.L1_MISS + mem_load_uops_retired.hit_lfb)",
+ "MetricExpr": "L1D_PEND_MISS.PENDING / (MEM_LOAD_UOPS_RETIRED.L1_MISS + MEM_LOAD_UOPS_RETIRED.HIT_LFB)",
"MetricGroup": "Mem;MemoryBound;MemoryLat",
"MetricName": "Load_Miss_Real_Latency"
},
@@ -670,19 +670,19 @@
},
{
"BriefDescription": "L1 cache true misses per kilo instruction for retired demand loads",
- "MetricExpr": "1000 * MEM_LOAD_UOPS_RETIRED.L1_MISS / INST_RETIRED.ANY",
+ "MetricExpr": "1e3 * MEM_LOAD_UOPS_RETIRED.L1_MISS / INST_RETIRED.ANY",
"MetricGroup": "CacheMisses;Mem",
"MetricName": "L1MPKI"
},
{
"BriefDescription": "L2 cache true misses per kilo instruction for retired demand loads",
- "MetricExpr": "1000 * MEM_LOAD_UOPS_RETIRED.L2_MISS / INST_RETIRED.ANY",
+ "MetricExpr": "1e3 * MEM_LOAD_UOPS_RETIRED.L2_MISS / INST_RETIRED.ANY",
"MetricGroup": "Backend;CacheMisses;Mem",
"MetricName": "L2MPKI"
},
{
"BriefDescription": "L3 cache true misses per kilo instruction for retired demand loads",
- "MetricExpr": "1000 * MEM_LOAD_UOPS_RETIRED.LLC_MISS / INST_RETIRED.ANY",
+ "MetricExpr": "1e3 * MEM_LOAD_UOPS_RETIRED.LLC_MISS / INST_RETIRED.ANY",
"MetricGroup": "CacheMisses;Mem",
"MetricName": "L3MPKI"
},
@@ -695,19 +695,19 @@
},
{
"BriefDescription": "Average per-core data fill bandwidth to the L1 data cache [GB / sec]",
- "MetricExpr": "64 * L1D.REPLACEMENT / 1000000000 / duration_time",
+ "MetricExpr": "64 * L1D.REPLACEMENT / 1e9 / duration_time",
"MetricGroup": "Mem;MemoryBW",
"MetricName": "L1D_Cache_Fill_BW"
},
{
"BriefDescription": "Average per-core data fill bandwidth to the L2 cache [GB / sec]",
- "MetricExpr": "64 * L2_LINES_IN.ALL / 1000000000 / duration_time",
+ "MetricExpr": "64 * L2_LINES_IN.ALL / 1e9 / duration_time",
"MetricGroup": "Mem;MemoryBW",
"MetricName": "L2_Cache_Fill_BW"
},
{
"BriefDescription": "Average per-core data fill bandwidth to the L3 cache [GB / sec]",
- "MetricExpr": "64 * LONGEST_LAT_CACHE.MISS / 1000000000 / duration_time",
+ "MetricExpr": "64 * LONGEST_LAT_CACHE.MISS / 1e9 / duration_time",
"MetricGroup": "Mem;MemoryBW",
"MetricName": "L3_Cache_Fill_BW"
},
@@ -737,19 +737,19 @@
},
{
"BriefDescription": "Average CPU Utilization",
- "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC / msr@tsc@",
+ "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC / TSC",
"MetricGroup": "HPC;Summary",
"MetricName": "CPU_Utilization"
},
{
"BriefDescription": "Measured Average Frequency for unhalted processors [GHz]",
- "MetricExpr": "Turbo_Utilization * msr@tsc@ / 1000000000 / duration_time",
+ "MetricExpr": "Turbo_Utilization * TSC / 1e9 / duration_time",
"MetricGroup": "Power;Summary",
"MetricName": "Average_Frequency"
},
{
"BriefDescription": "Giga Floating Point Operations Per Second",
- "MetricExpr": "((1 * (FP_COMP_OPS_EXE.SSE_SCALAR_SINGLE + FP_COMP_OPS_EXE.SSE_SCALAR_DOUBLE) + 2 * FP_COMP_OPS_EXE.SSE_PACKED_DOUBLE + 4 * (FP_COMP_OPS_EXE.SSE_PACKED_SINGLE + SIMD_FP_256.PACKED_DOUBLE) + 8 * SIMD_FP_256.PACKED_SINGLE) / 1000000000) / duration_time",
+ "MetricExpr": "(FP_COMP_OPS_EXE.SSE_SCALAR_SINGLE + FP_COMP_OPS_EXE.SSE_SCALAR_DOUBLE + 2 * FP_COMP_OPS_EXE.SSE_PACKED_DOUBLE + 4 * (FP_COMP_OPS_EXE.SSE_PACKED_SINGLE + SIMD_FP_256.PACKED_DOUBLE) + 8 * SIMD_FP_256.PACKED_SINGLE) / 1e9 / duration_time",
"MetricGroup": "Cor;Flops;HPC",
"MetricName": "GFLOPs",
"PublicDescription": "Giga Floating Point Operations Per Second. Aggregate across all supported options of: FP precisions, scalar and vector instructions, vector-width and AMX engine."
@@ -762,7 +762,7 @@
},
{
"BriefDescription": "Fraction of cycles where both hardware Logical Processors were active",
- "MetricExpr": "1 - CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / (CPU_CLK_UNHALTED.REF_XCLK_ANY / 2) if #SMT_on else 0",
+ "MetricExpr": "(1 - CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / (CPU_CLK_UNHALTED.REF_XCLK_ANY / 2) if #SMT_on else 0)",
"MetricGroup": "SMT",
"MetricName": "SMT_2T_Utilization"
},
@@ -780,10 +780,22 @@
},
{
"BriefDescription": "Average external Memory Bandwidth Use for reads and writes [GB / sec]",
- "MetricExpr": "(64 * (uncore_imc@..._count_read@ + uncore_imc@..._count_write@) / 1000000000) / duration_time",
+ "MetricExpr": "64 * (UNC_M_CAS_COUNT.RD + UNC_M_CAS_COUNT.WR) / 1e9 / duration_time",
"MetricGroup": "HPC;Mem;MemoryBW;SoC",
"MetricName": "DRAM_BW_Use"
},
+ {
+ "BriefDescription": "Average latency of data read request to external memory (in nanoseconds). Accounts for demand loads and L1/L2 prefetches",
+ "MetricExpr": "1e9 * (UNC_C_TOR_OCCUPANCY.MISS_OPCODE@...ter_opc\\=0x182@ / UNC_C_TOR_INSERTS.MISS_OPCODE@...ter_opc\\=0x182@) / (Socket_CLKS / duration_time)",
+ "MetricGroup": "Mem;MemoryLat;SoC",
+ "MetricName": "MEM_Read_Latency"
+ },
+ {
+ "BriefDescription": "Average number of parallel data read requests to external memory. Accounts for demand loads and L1/L2 prefetches",
+ "MetricExpr": "UNC_C_TOR_OCCUPANCY.MISS_OPCODE@...ter_opc\\=0x182@ / UNC_C_TOR_OCCUPANCY.MISS_OPCODE@...ter_opc\\=0x182\\,thresh\\=1@",
+ "MetricGroup": "Mem;MemoryBW;SoC",
+ "MetricName": "MEM_Parallel_Reads"
+ },
{
"BriefDescription": "Socket actual clocks when any core is active on that socket",
"MetricExpr": "cbox_0@...nt\\=0x0@",
@@ -796,52 +808,59 @@
"MetricGroup": "Branches;OS",
"MetricName": "IpFarBranch"
},
+ {
+ "BriefDescription": "Uncore frequency per die [GHZ]",
+ "MetricExpr": "Socket_CLKS / #num_dies / duration_time / 1e9",
+ "MetricGroup": "SoC",
+ "MetricName": "UNCORE_FREQ"
+ },
{
"BriefDescription": "C3 residency percent per core",
- "MetricExpr": "(cstate_core@c3\\-residency@ / msr@tsc@) * 100",
+ "MetricExpr": "cstate_core@c3\\-residency@ / TSC",
"MetricGroup": "Power",
- "MetricName": "C3_Core_Residency"
+ "MetricName": "C3_Core_Residency",
+ "ScaleUnit": "100%"
},
{
"BriefDescription": "C6 residency percent per core",
- "MetricExpr": "(cstate_core@c6\\-residency@ / msr@tsc@) * 100",
+ "MetricExpr": "cstate_core@c6\\-residency@ / TSC",
"MetricGroup": "Power",
- "MetricName": "C6_Core_Residency"
+ "MetricName": "C6_Core_Residency",
+ "ScaleUnit": "100%"
},
{
"BriefDescription": "C7 residency percent per core",
- "MetricExpr": "(cstate_core@c7\\-residency@ / msr@tsc@) * 100",
+ "MetricExpr": "cstate_core@c7\\-residency@ / TSC",
"MetricGroup": "Power",
- "MetricName": "C7_Core_Residency"
+ "MetricName": "C7_Core_Residency",
+ "ScaleUnit": "100%"
},
{
"BriefDescription": "C2 residency percent per package",
- "MetricExpr": "(cstate_pkg@c2\\-residency@ / msr@tsc@) * 100",
+ "MetricExpr": "cstate_pkg@c2\\-residency@ / TSC",
"MetricGroup": "Power",
- "MetricName": "C2_Pkg_Residency"
+ "MetricName": "C2_Pkg_Residency",
+ "ScaleUnit": "100%"
},
{
"BriefDescription": "C3 residency percent per package",
- "MetricExpr": "(cstate_pkg@c3\\-residency@ / msr@tsc@) * 100",
+ "MetricExpr": "cstate_pkg@c3\\-residency@ / TSC",
"MetricGroup": "Power",
- "MetricName": "C3_Pkg_Residency"
+ "MetricName": "C3_Pkg_Residency",
+ "ScaleUnit": "100%"
},
{
"BriefDescription": "C6 residency percent per package",
- "MetricExpr": "(cstate_pkg@c6\\-residency@ / msr@tsc@) * 100",
+ "MetricExpr": "cstate_pkg@c6\\-residency@ / TSC",
"MetricGroup": "Power",
- "MetricName": "C6_Pkg_Residency"
+ "MetricName": "C6_Pkg_Residency",
+ "ScaleUnit": "100%"
},
{
"BriefDescription": "C7 residency percent per package",
- "MetricExpr": "(cstate_pkg@c7\\-residency@ / msr@tsc@) * 100",
+ "MetricExpr": "cstate_pkg@c7\\-residency@ / TSC",
"MetricGroup": "Power",
- "MetricName": "C7_Pkg_Residency"
- },
- {
- "BriefDescription": "Uncore frequency per die [GHZ]",
- "MetricExpr": "Socket_CLKS / #num_dies / duration_time / 1000000000",
- "MetricGroup": "SoC",
- "MetricName": "UNCORE_FREQ"
+ "MetricName": "C7_Pkg_Residency",
+ "ScaleUnit": "100%"
}
]
diff --git a/tools/perf/pmu-events/arch/x86/ivytown/memory.json b/tools/perf/pmu-events/arch/x86/ivytown/memory.json
index 99b71e43acad..138d1aa0b32d 100644
--- a/tools/perf/pmu-events/arch/x86/ivytown/memory.json
+++ b/tools/perf/pmu-events/arch/x86/ivytown/memory.json
@@ -1,8 +1,6 @@
[
{
"BriefDescription": "Counts the number of machine clears due to memory order conflicts.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xC3",
"EventName": "MACHINE_CLEARS.MEMORY_ORDERING",
"SampleAfterValue": "100003",
@@ -10,8 +8,6 @@
},
{
"BriefDescription": "Loads with latency value being above 128",
- "Counter": "3",
- "CounterHTOff": "3",
"EventCode": "0xCD",
"EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_128",
"MSRIndex": "0x3F6",
@@ -19,13 +15,10 @@
"PEBS": "2",
"PublicDescription": "Loads with latency value being above 128.",
"SampleAfterValue": "1009",
- "TakenAlone": "1",
"UMask": "0x1"
},
{
"BriefDescription": "Loads with latency value being above 16",
- "Counter": "3",
- "CounterHTOff": "3",
"EventCode": "0xCD",
"EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_16",
"MSRIndex": "0x3F6",
@@ -33,13 +26,10 @@
"PEBS": "2",
"PublicDescription": "Loads with latency value being above 16.",
"SampleAfterValue": "20011",
- "TakenAlone": "1",
"UMask": "0x1"
},
{
"BriefDescription": "Loads with latency value being above 256",
- "Counter": "3",
- "CounterHTOff": "3",
"EventCode": "0xCD",
"EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_256",
"MSRIndex": "0x3F6",
@@ -47,13 +37,10 @@
"PEBS": "2",
"PublicDescription": "Loads with latency value being above 256.",
"SampleAfterValue": "503",
- "TakenAlone": "1",
"UMask": "0x1"
},
{
"BriefDescription": "Loads with latency value being above 32",
- "Counter": "3",
- "CounterHTOff": "3",
"EventCode": "0xCD",
"EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_32",
"MSRIndex": "0x3F6",
@@ -61,13 +48,10 @@
"PEBS": "2",
"PublicDescription": "Loads with latency value being above 32.",
"SampleAfterValue": "100007",
- "TakenAlone": "1",
"UMask": "0x1"
},
{
"BriefDescription": "Loads with latency value being above 4",
- "Counter": "3",
- "CounterHTOff": "3",
"EventCode": "0xCD",
"EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_4",
"MSRIndex": "0x3F6",
@@ -75,13 +59,10 @@
"PEBS": "2",
"PublicDescription": "Loads with latency value being above 4.",
"SampleAfterValue": "100003",
- "TakenAlone": "1",
"UMask": "0x1"
},
{
"BriefDescription": "Loads with latency value being above 512",
- "Counter": "3",
- "CounterHTOff": "3",
"EventCode": "0xCD",
"EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_512",
"MSRIndex": "0x3F6",
@@ -89,13 +70,10 @@
"PEBS": "2",
"PublicDescription": "Loads with latency value being above 512.",
"SampleAfterValue": "101",
- "TakenAlone": "1",
"UMask": "0x1"
},
{
"BriefDescription": "Loads with latency value being above 64",
- "Counter": "3",
- "CounterHTOff": "3",
"EventCode": "0xCD",
"EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_64",
"MSRIndex": "0x3F6",
@@ -103,13 +81,10 @@
"PEBS": "2",
"PublicDescription": "Loads with latency value being above 64.",
"SampleAfterValue": "2003",
- "TakenAlone": "1",
"UMask": "0x1"
},
{
"BriefDescription": "Loads with latency value being above 8",
- "Counter": "3",
- "CounterHTOff": "3",
"EventCode": "0xCD",
"EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_8",
"MSRIndex": "0x3F6",
@@ -117,25 +92,18 @@
"PEBS": "2",
"PublicDescription": "Loads with latency value being above 8.",
"SampleAfterValue": "50021",
- "TakenAlone": "1",
"UMask": "0x1"
},
{
"BriefDescription": "Sample stores and collect precise store operation via PEBS record. PMC3 only.",
- "Counter": "3",
- "CounterHTOff": "3",
"EventCode": "0xCD",
"EventName": "MEM_TRANS_RETIRED.PRECISE_STORE",
"PEBS": "2",
- "PRECISE_STORE": "1",
"SampleAfterValue": "2000003",
- "TakenAlone": "1",
"UMask": "0x2"
},
{
"BriefDescription": "Speculative cache line split load uops dispatched to L1 cache",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x05",
"EventName": "MISALIGN_MEM_REF.LOADS",
"PublicDescription": "Speculative cache-line split load uops dispatched to L1D.",
@@ -144,8 +112,6 @@
},
{
"BriefDescription": "Speculative cache line split STA uops dispatched to L1 cache",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x05",
"EventName": "MISALIGN_MEM_REF.STORES",
"PublicDescription": "Speculative cache-line split Store-address uops dispatched to L1D.",
@@ -154,349 +120,262 @@
},
{
"BriefDescription": "Counts all demand & prefetch code reads that miss the LLC",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_CODE_RD.LLC_MISS.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x3fffc00244",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts all demand & prefetch code reads that miss the LLC and the data returned from remote dram",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_CODE_RD.LLC_MISS.REMOTE_DRAM",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x67f800244",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts all demand & prefetch code reads that miss the LLC and the data forwarded from remote cache",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_CODE_RD.LLC_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x87f800244",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts all demand & prefetch data reads that hits the LLC",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_MISS.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x3fffc20091",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that hit the LLC",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_MISS.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x3fffc203f7",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that miss the LLC and the data returned from local dram",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_MISS.LOCAL_DRAM",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x6004003f7",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that miss the LLC the data is found in M state in remote cache and forwarded from there",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_MISS.REMOTE_HITM",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x107fc003f7",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that miss the LLC and the data forwarded from remote cache",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x87f8203f7",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts all demand code reads that miss the LLC",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.LLC_MISS.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x3fffc20004",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts all demand code reads that miss the LLC and the data returned from local dram",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.LLC_MISS.LOCAL_DRAM",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x600400004",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts all demand code reads that miss the LLC and the data returned from remote dram",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.LLC_MISS.REMOTE_DRAM",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x67f800004",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts all demand code reads that miss the LLC the data is found in M state in remote cache and forwarded from there",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.LLC_MISS.REMOTE_HITM",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x107fc00004",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts all demand code reads that miss the LLC and the data forwarded from remote cache",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.LLC_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x87f820004",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts demand data reads that miss the LLC and the data returned from remote & local dram",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.LLC_MISS.ANY_DRAM",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x67fc00001",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts demand data reads that miss in the LLC",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.LLC_MISS.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x3fffc20001",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts demand data reads that miss the LLC and the data returned from local dram",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.LLC_MISS.LOCAL_DRAM",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x600400001",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts demand data reads that miss the LLC and the data returned from remote dram",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.LLC_MISS.REMOTE_DRAM",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x67f800001",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts demand data reads that miss the LLC the data is found in M state in remote cache and forwarded from there",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.LLC_MISS.REMOTE_HITM",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x107fc00001",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts demand data reads that miss the LLC and the data forwarded from remote cache",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.LLC_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x87f820001",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts all demand data writes (RFOs) that miss the LLC and the data is found in M state in remote cache and forwarded from there.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.DEMAND_RFO.LLC_MISS.REMOTE_HITM",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x107fc20002",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts all prefetch (that bring data to L2) code reads that miss the LLC and the data returned from remote & local dram",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.LLC_MISS.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x3fffc20040",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts prefetch (that bring data to L2) data reads that miss the LLC and the data returned from remote & local dram",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.LLC_MISS.ANY_DRAM",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x67fc00010",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts prefetch (that bring data to L2) data reads that miss in the LLC",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.LLC_MISS.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x3fffc20010",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts prefetch (that bring data to L2) data reads that miss the LLC and the data returned from local dram",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.LLC_MISS.LOCAL_DRAM",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x600400010",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts prefetch (that bring data to L2) data reads that miss the LLC and the data returned from remote dram",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.LLC_MISS.REMOTE_DRAM",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x67f800010",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts prefetch (that bring data to L2) data reads that miss the LLC the data is found in M state in remote cache and forwarded from there",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.LLC_MISS.REMOTE_HITM",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x107fc00010",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts prefetch (that bring data to L2) data reads that miss the LLC and the data forwarded from remote cache",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.LLC_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x87f820010",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads that miss in the LLC",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_LLC_CODE_RD.LLC_MISS.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x3fffc20200",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Counts prefetch (that bring data to LLC only) data reads that miss in the LLC",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xB7, 0xBB",
"EventName": "OFFCORE_RESPONSE.PF_LLC_DATA_RD.LLC_MISS.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
"MSRValue": "0x3fffc20080",
- "Offcore": "1",
"SampleAfterValue": "100003",
"UMask": "0x1"
}
diff --git a/tools/perf/pmu-events/arch/x86/ivytown/other.json b/tools/perf/pmu-events/arch/x86/ivytown/other.json
index 2d62521791d8..e80e99d064ba 100644
--- a/tools/perf/pmu-events/arch/x86/ivytown/other.json
+++ b/tools/perf/pmu-events/arch/x86/ivytown/other.json
@@ -1,8 +1,6 @@
[
{
"BriefDescription": "Unhalted core cycles when the thread is in ring 0",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x5C",
"EventName": "CPL_CYCLES.RING0",
"PublicDescription": "Unhalted core cycles when the thread is in ring 0.",
@@ -11,8 +9,6 @@
},
{
"BriefDescription": "Number of intervals between processor halts while thread is in ring 0",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"CounterMask": "1",
"EdgeDetect": "1",
"EventCode": "0x5C",
@@ -23,8 +19,6 @@
},
{
"BriefDescription": "Unhalted core cycles when thread is in rings 1, 2, or 3",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x5C",
"EventName": "CPL_CYCLES.RING123",
"PublicDescription": "Unhalted core cycles when the thread is not in ring 0.",
@@ -33,8 +27,6 @@
},
{
"BriefDescription": "Cycles when L1 and L2 are locked due to UC or split lock",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x63",
"EventName": "LOCK_CYCLES.SPLIT_LOCK_UC_LOCK_DURATION",
"PublicDescription": "Cycles in which the L1D and L2 are locked, due to a UC lock or split lock.",
diff --git a/tools/perf/pmu-events/arch/x86/ivytown/pipeline.json b/tools/perf/pmu-events/arch/x86/ivytown/pipeline.json
index d89d3f8db190..d1e64e0d683e 100644
--- a/tools/perf/pmu-events/arch/x86/ivytown/pipeline.json
+++ b/tools/perf/pmu-events/arch/x86/ivytown/pipeline.json
@@ -1,8 +1,6 @@
[
{
"BriefDescription": "Divide operations executed",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"CounterMask": "1",
"EdgeDetect": "1",
"EventCode": "0x14",
@@ -13,8 +11,6 @@
},
{
"BriefDescription": "Cycles when divider is busy executing divide operations",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x14",
"EventName": "ARITH.FPU_DIV_ACTIVE",
"PublicDescription": "Cycles that the divider is active, includes INT and FP. Set 'edge =1, cmask=1' to count the number of divides.",
@@ -23,8 +19,6 @@
},
{
"BriefDescription": "Speculative and retired branches",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x88",
"EventName": "BR_INST_EXEC.ALL_BRANCHES",
"PublicDescription": "Counts all near executed branches (not necessarily retired).",
@@ -33,8 +27,6 @@
},
{
"BriefDescription": "Speculative and retired macro-conditional branches",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x88",
"EventName": "BR_INST_EXEC.ALL_CONDITIONAL",
"PublicDescription": "Speculative and retired macro-conditional branches.",
@@ -43,8 +35,6 @@
},
{
"BriefDescription": "Speculative and retired macro-unconditional branches excluding calls and indirects",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x88",
"EventName": "BR_INST_EXEC.ALL_DIRECT_JMP",
"PublicDescription": "Speculative and retired macro-unconditional branches excluding calls and indirects.",
@@ -53,8 +43,6 @@
},
{
"BriefDescription": "Speculative and retired direct near calls",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x88",
"EventName": "BR_INST_EXEC.ALL_DIRECT_NEAR_CALL",
"PublicDescription": "Speculative and retired direct near calls.",
@@ -63,8 +51,6 @@
},
{
"BriefDescription": "Speculative and retired indirect branches excluding calls and returns",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x88",
"EventName": "BR_INST_EXEC.ALL_INDIRECT_JUMP_NON_CALL_RET",
"PublicDescription": "Speculative and retired indirect branches excluding calls and returns.",
@@ -73,8 +59,6 @@
},
{
"BriefDescription": "Speculative and retired indirect return branches.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x88",
"EventName": "BR_INST_EXEC.ALL_INDIRECT_NEAR_RETURN",
"SampleAfterValue": "200003",
@@ -82,8 +66,6 @@
},
{
"BriefDescription": "Not taken macro-conditional branches",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x88",
"EventName": "BR_INST_EXEC.NONTAKEN_CONDITIONAL",
"PublicDescription": "Not taken macro-conditional branches.",
@@ -92,8 +74,6 @@
},
{
"BriefDescription": "Taken speculative and retired macro-conditional branches",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x88",
"EventName": "BR_INST_EXEC.TAKEN_CONDITIONAL",
"PublicDescription": "Taken speculative and retired macro-conditional branches.",
@@ -102,8 +82,6 @@
},
{
"BriefDescription": "Taken speculative and retired macro-conditional branch instructions excluding calls and indirects",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x88",
"EventName": "BR_INST_EXEC.TAKEN_DIRECT_JUMP",
"PublicDescription": "Taken speculative and retired macro-conditional branch instructions excluding calls and indirects.",
@@ -112,8 +90,6 @@
},
{
"BriefDescription": "Taken speculative and retired direct near calls",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x88",
"EventName": "BR_INST_EXEC.TAKEN_DIRECT_NEAR_CALL",
"PublicDescription": "Taken speculative and retired direct near calls.",
@@ -122,8 +98,6 @@
},
{
"BriefDescription": "Taken speculative and retired indirect branches excluding calls and returns",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x88",
"EventName": "BR_INST_EXEC.TAKEN_INDIRECT_JUMP_NON_CALL_RET",
"PublicDescription": "Taken speculative and retired indirect branches excluding calls and returns.",
@@ -132,8 +106,6 @@
},
{
"BriefDescription": "Taken speculative and retired indirect calls",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x88",
"EventName": "BR_INST_EXEC.TAKEN_INDIRECT_NEAR_CALL",
"PublicDescription": "Taken speculative and retired indirect calls.",
@@ -142,8 +114,6 @@
},
{
"BriefDescription": "Taken speculative and retired indirect branches with return mnemonic",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x88",
"EventName": "BR_INST_EXEC.TAKEN_INDIRECT_NEAR_RETURN",
"PublicDescription": "Taken speculative and retired indirect branches with return mnemonic.",
@@ -152,8 +122,6 @@
},
{
"BriefDescription": "All (macro) branch instructions retired.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xC4",
"EventName": "BR_INST_RETIRED.ALL_BRANCHES",
"PublicDescription": "Branch instructions at retirement.",
@@ -161,8 +129,6 @@
},
{
"BriefDescription": "All (macro) branch instructions retired.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xC4",
"EventName": "BR_INST_RETIRED.ALL_BRANCHES_PEBS",
"PEBS": "2",
@@ -171,8 +137,6 @@
},
{
"BriefDescription": "Conditional branch instructions retired.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xC4",
"EventName": "BR_INST_RETIRED.CONDITIONAL",
"PEBS": "1",
@@ -181,8 +145,6 @@
},
{
"BriefDescription": "Far branch instructions retired.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xC4",
"EventName": "BR_INST_RETIRED.FAR_BRANCH",
"PublicDescription": "Number of far branches retired.",
@@ -191,8 +153,6 @@
},
{
"BriefDescription": "Direct and indirect near call instructions retired.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xC4",
"EventName": "BR_INST_RETIRED.NEAR_CALL",
"PEBS": "1",
@@ -201,8 +161,6 @@
},
{
"BriefDescription": "Direct and indirect macro near call instructions retired (captured in ring 3).",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xC4",
"EventName": "BR_INST_RETIRED.NEAR_CALL_R3",
"PEBS": "1",
@@ -211,8 +169,6 @@
},
{
"BriefDescription": "Return instructions retired.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xC4",
"EventName": "BR_INST_RETIRED.NEAR_RETURN",
"PEBS": "1",
@@ -221,8 +177,6 @@
},
{
"BriefDescription": "Taken branch instructions retired.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xC4",
"EventName": "BR_INST_RETIRED.NEAR_TAKEN",
"PEBS": "1",
@@ -231,8 +185,6 @@
},
{
"BriefDescription": "Not taken branch instructions retired.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xC4",
"EventName": "BR_INST_RETIRED.NOT_TAKEN",
"PublicDescription": "Counts the number of not taken branch instructions retired.",
@@ -241,8 +193,6 @@
},
{
"BriefDescription": "Speculative and retired mispredicted macro conditional branches",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x89",
"EventName": "BR_MISP_EXEC.ALL_BRANCHES",
"PublicDescription": "Counts all near executed branches (not necessarily retired).",
@@ -251,8 +201,6 @@
},
{
"BriefDescription": "Speculative and retired mispredicted macro conditional branches",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x89",
"EventName": "BR_MISP_EXEC.ALL_CONDITIONAL",
"PublicDescription": "Speculative and retired mispredicted macro conditional branches.",
@@ -261,8 +209,6 @@
},
{
"BriefDescription": "Mispredicted indirect branches excluding calls and returns",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x89",
"EventName": "BR_MISP_EXEC.ALL_INDIRECT_JUMP_NON_CALL_RET",
"PublicDescription": "Mispredicted indirect branches excluding calls and returns.",
@@ -271,8 +217,6 @@
},
{
"BriefDescription": "Not taken speculative and retired mispredicted macro conditional branches",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x89",
"EventName": "BR_MISP_EXEC.NONTAKEN_CONDITIONAL",
"PublicDescription": "Not taken speculative and retired mispredicted macro conditional branches.",
@@ -281,8 +225,6 @@
},
{
"BriefDescription": "Taken speculative and retired mispredicted macro conditional branches",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x89",
"EventName": "BR_MISP_EXEC.TAKEN_CONDITIONAL",
"PublicDescription": "Taken speculative and retired mispredicted macro conditional branches.",
@@ -291,8 +233,6 @@
},
{
"BriefDescription": "Taken speculative and retired mispredicted indirect branches excluding calls and returns",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x89",
"EventName": "BR_MISP_EXEC.TAKEN_INDIRECT_JUMP_NON_CALL_RET",
"PublicDescription": "Taken speculative and retired mispredicted indirect branches excluding calls and returns.",
@@ -301,8 +241,6 @@
},
{
"BriefDescription": "Taken speculative and retired mispredicted indirect calls",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x89",
"EventName": "BR_MISP_EXEC.TAKEN_INDIRECT_NEAR_CALL",
"PublicDescription": "Taken speculative and retired mispredicted indirect calls.",
@@ -311,8 +249,6 @@
},
{
"BriefDescription": "Taken speculative and retired mispredicted indirect branches with return mnemonic",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x89",
"EventName": "BR_MISP_EXEC.TAKEN_RETURN_NEAR",
"PublicDescription": "Taken speculative and retired mispredicted indirect branches with return mnemonic.",
@@ -321,8 +257,6 @@
},
{
"BriefDescription": "All mispredicted macro branch instructions retired.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xC5",
"EventName": "BR_MISP_RETIRED.ALL_BRANCHES",
"PublicDescription": "Mispredicted branch instructions at retirement.",
@@ -330,8 +264,6 @@
},
{
"BriefDescription": "Mispredicted macro branch instructions retired.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0xC5",
"EventName": "BR_MISP_RETIRED.ALL_BRANCHES_PEBS",
"PEBS": "2",
@@ -340,8 +272,6 @@
},
{
"BriefDescription": "Mispredicted conditional branch instructions retired.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xC5",
"EventName": "BR_MISP_RETIRED.CONDITIONAL",
"PEBS": "1",
@@ -350,8 +280,6 @@
},
{
"BriefDescription": "number of near branch instructions retired that were mispredicted and taken.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xC5",
"EventName": "BR_MISP_RETIRED.NEAR_TAKEN",
"PEBS": "1",
@@ -360,8 +288,6 @@
},
{
"BriefDescription": "Count XClk pulses when this thread is unhalted and the other is halted.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"EventCode": "0x3C",
"EventName": "CPU_CLK_THREAD_UNHALTED.ONE_THREAD_ACTIVE",
"SampleAfterValue": "2000003",
@@ -369,8 +295,6 @@
},
{
"BriefDescription": "Reference cycles when the thread is unhalted (counts at 100 MHz rate)",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x3C",
"EventName": "CPU_CLK_THREAD_UNHALTED.REF_XCLK",
"PublicDescription": "Increments at the frequency of XCLK (100 MHz) when not halted.",
@@ -380,8 +304,6 @@
{
"AnyThread": "1",
"BriefDescription": "Reference cycles when the at least one thread on the physical core is unhalted. (counts at 100 MHz rate)",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x3C",
"EventName": "CPU_CLK_THREAD_UNHALTED.REF_XCLK_ANY",
"SampleAfterValue": "2000003",
@@ -389,8 +311,6 @@
},
{
"BriefDescription": "Count XClk pulses when this thread is unhalted and the other thread is halted.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x3C",
"EventName": "CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE",
"SampleAfterValue": "2000003",
@@ -398,16 +318,12 @@
},
{
"BriefDescription": "Reference cycles when the core is not in halt state.",
- "Counter": "Fixed counter 2",
- "CounterHTOff": "Fixed counter 2",
"EventName": "CPU_CLK_UNHALTED.REF_TSC",
"SampleAfterValue": "2000003",
"UMask": "0x3"
},
{
"BriefDescription": "Reference cycles when the thread is unhalted (counts at 100 MHz rate)",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x3C",
"EventName": "CPU_CLK_UNHALTED.REF_XCLK",
"PublicDescription": "Reference cycles when the thread is unhalted. (counts at 100 MHz rate)",
@@ -417,8 +333,6 @@
{
"AnyThread": "1",
"BriefDescription": "Reference cycles when the at least one thread on the physical core is unhalted. (counts at 100 MHz rate)",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x3C",
"EventName": "CPU_CLK_UNHALTED.REF_XCLK_ANY",
"SampleAfterValue": "2000003",
@@ -426,8 +340,6 @@
},
{
"BriefDescription": "Core cycles when the thread is not in halt state.",
- "Counter": "Fixed counter 1",
- "CounterHTOff": "Fixed counter 1",
"EventName": "CPU_CLK_UNHALTED.THREAD",
"SampleAfterValue": "2000003",
"UMask": "0x2"
@@ -435,8 +347,6 @@
{
"AnyThread": "1",
"BriefDescription": "Core cycles when at least one thread on the physical core is not in halt state",
- "Counter": "Fixed counter 1",
- "CounterHTOff": "Fixed counter 1",
"EventName": "CPU_CLK_UNHALTED.THREAD_ANY",
"PublicDescription": "Core cycles when at least one thread on the physical core is not in halt state.",
"SampleAfterValue": "2000003",
@@ -444,8 +354,6 @@
},
{
"BriefDescription": "Thread cycles when thread is not in halt state",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x3C",
"EventName": "CPU_CLK_UNHALTED.THREAD_P",
"PublicDescription": "Counts the number of thread cycles while the thread is not in a halt state. The thread enters the halt state when it is running the HLT instruction. The core frequency may change from time to time due to power or thermal throttling.",
@@ -454,8 +362,6 @@
{
"AnyThread": "1",
"BriefDescription": "Core cycles when at least one thread on the physical core is not in halt state",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x3C",
"EventName": "CPU_CLK_UNHALTED.THREAD_P_ANY",
"PublicDescription": "Core cycles when at least one thread on the physical core is not in halt state.",
@@ -463,8 +369,6 @@
},
{
"BriefDescription": "Cycles while L1 cache miss demand load is outstanding.",
- "Counter": "2",
- "CounterHTOff": "2",
"CounterMask": "8",
"EventCode": "0xA3",
"EventName": "CYCLE_ACTIVITY.CYCLES_L1D_MISS",
@@ -473,8 +377,6 @@
},
{
"BriefDescription": "Cycles with pending L1 cache miss loads.",
- "Counter": "2",
- "CounterHTOff": "2",
"CounterMask": "8",
"EventCode": "0xA3",
"EventName": "CYCLE_ACTIVITY.CYCLES_L1D_PENDING",
@@ -484,8 +386,6 @@
},
{
"BriefDescription": "Cycles while L2 cache miss load* is outstanding.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"CounterMask": "1",
"EventCode": "0xA3",
"EventName": "CYCLE_ACTIVITY.CYCLES_L2_MISS",
@@ -494,8 +394,6 @@
},
{
"BriefDescription": "Cycles with pending L2 cache miss loads.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"CounterMask": "1",
"EventCode": "0xA3",
"EventName": "CYCLE_ACTIVITY.CYCLES_L2_PENDING",
@@ -505,8 +403,6 @@
},
{
"BriefDescription": "Cycles with pending memory loads.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"CounterMask": "2",
"EventCode": "0xA3",
"EventName": "CYCLE_ACTIVITY.CYCLES_LDM_PENDING",
@@ -516,8 +412,6 @@
},
{
"BriefDescription": "Cycles while memory subsystem has an outstanding load.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"CounterMask": "2",
"EventCode": "0xA3",
"EventName": "CYCLE_ACTIVITY.CYCLES_MEM_ANY",
@@ -526,8 +420,6 @@
},
{
"BriefDescription": "This event increments by 1 for every cycle where there was no execute for this thread.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"CounterMask": "4",
"EventCode": "0xA3",
"EventName": "CYCLE_ACTIVITY.CYCLES_NO_EXECUTE",
@@ -537,8 +429,6 @@
},
{
"BriefDescription": "Execution stalls while L1 cache miss demand load is outstanding.",
- "Counter": "2",
- "CounterHTOff": "2",
"CounterMask": "12",
"EventCode": "0xA3",
"EventName": "CYCLE_ACTIVITY.STALLS_L1D_MISS",
@@ -547,8 +437,6 @@
},
{
"BriefDescription": "Execution stalls due to L1 data cache misses",
- "Counter": "2",
- "CounterHTOff": "2",
"CounterMask": "12",
"EventCode": "0xA3",
"EventName": "CYCLE_ACTIVITY.STALLS_L1D_PENDING",
@@ -558,8 +446,6 @@
},
{
"BriefDescription": "Execution stalls while L2 cache miss load* is outstanding.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"CounterMask": "5",
"EventCode": "0xA3",
"EventName": "CYCLE_ACTIVITY.STALLS_L2_MISS",
@@ -568,8 +454,6 @@
},
{
"BriefDescription": "Execution stalls due to L2 cache misses.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"CounterMask": "5",
"EventCode": "0xA3",
"EventName": "CYCLE_ACTIVITY.STALLS_L2_PENDING",
@@ -579,8 +463,6 @@
},
{
"BriefDescription": "Execution stalls due to memory subsystem.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"CounterMask": "6",
"EventCode": "0xA3",
"EventName": "CYCLE_ACTIVITY.STALLS_LDM_PENDING",
@@ -589,8 +471,6 @@
},
{
"BriefDescription": "Execution stalls while memory subsystem has an outstanding load.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"CounterMask": "6",
"EventCode": "0xA3",
"EventName": "CYCLE_ACTIVITY.STALLS_MEM_ANY",
@@ -599,8 +479,6 @@
},
{
"BriefDescription": "Total execution stalls.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"CounterMask": "4",
"EventCode": "0xA3",
"EventName": "CYCLE_ACTIVITY.STALLS_TOTAL",
@@ -609,8 +487,6 @@
},
{
"BriefDescription": "Stall cycles because IQ is full",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x87",
"EventName": "ILD_STALL.IQ_FULL",
"PublicDescription": "Stall cycles due to IQ is full.",
@@ -619,8 +495,6 @@
},
{
"BriefDescription": "Stalls caused by changing prefix length of the instruction.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x87",
"EventName": "ILD_STALL.LCP",
"SampleAfterValue": "2000003",
@@ -628,16 +502,12 @@
},
{
"BriefDescription": "Instructions retired from execution.",
- "Counter": "Fixed counter 0",
- "CounterHTOff": "Fixed counter 0",
"EventName": "INST_RETIRED.ANY",
"SampleAfterValue": "2000003",
"UMask": "0x1"
},
{
"BriefDescription": "Number of instructions retired. General Counter - architectural event",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xC0",
"EventName": "INST_RETIRED.ANY_P",
"PublicDescription": "Number of instructions at retirement.",
@@ -645,8 +515,6 @@
},
{
"BriefDescription": "Precise instruction retired event with HW to reduce effect of PEBS shadow in IP distribution",
- "Counter": "1",
- "CounterHTOff": "1",
"EventCode": "0xC0",
"EventName": "INST_RETIRED.PREC_DIST",
"PEBS": "2",
@@ -656,8 +524,6 @@
},
{
"BriefDescription": "Number of cycles waiting for the checkpoints in Resource Allocation Table (RAT) to be recovered after Nuke due to all other cases except JEClear (e.g. whenever a ucode assist is needed like SSE exception, memory disambiguation, etc.)",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"CounterMask": "1",
"EventCode": "0x0D",
"EventName": "INT_MISC.RECOVERY_CYCLES",
@@ -667,8 +533,6 @@
{
"AnyThread": "1",
"BriefDescription": "Core cycles the allocator was stalled due to recovery from earlier clear event for any thread running on the physical core (e.g. misprediction or memory nuke).",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"CounterMask": "1",
"EventCode": "0x0D",
"EventName": "INT_MISC.RECOVERY_CYCLES_ANY",
@@ -677,8 +541,6 @@
},
{
"BriefDescription": "Number of occurrences waiting for the checkpoints in Resource Allocation Table (RAT) to be recovered after Nuke due to all other cases except JEClear (e.g. whenever a ucode assist is needed like SSE exception, memory disambiguation, etc.)",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"CounterMask": "1",
"EdgeDetect": "1",
"EventCode": "0x0D",
@@ -688,8 +550,6 @@
},
{
"BriefDescription": "This event counts the number of times that split load operations are temporarily blocked because all resources for handling the split accesses are in use.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x03",
"EventName": "LD_BLOCKS.NO_SR",
"PublicDescription": "The number of times that split load operations are temporarily blocked because all resources for handling the split accesses are in use.",
@@ -698,8 +558,6 @@
},
{
"BriefDescription": "Cases when loads get true Block-on-Store blocking code preventing store forwarding",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x03",
"EventName": "LD_BLOCKS.STORE_FORWARD",
"PublicDescription": "Loads blocked by overlapping with store buffer that cannot be forwarded.",
@@ -708,8 +566,6 @@
},
{
"BriefDescription": "False dependencies in MOB due to partial compare on address",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x07",
"EventName": "LD_BLOCKS_PARTIAL.ADDRESS_ALIAS",
"PublicDescription": "False dependencies in MOB due to partial compare on address.",
@@ -718,8 +574,6 @@
},
{
"BriefDescription": "Not software-prefetch load dispatches that hit FB allocated for hardware prefetch",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x4C",
"EventName": "LOAD_HIT_PRE.HW_PF",
"PublicDescription": "Non-SW-prefetch load dispatches that hit fill buffer allocated for H/W prefetch.",
@@ -728,8 +582,6 @@
},
{
"BriefDescription": "Not software-prefetch load dispatches that hit FB allocated for software prefetch",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x4C",
"EventName": "LOAD_HIT_PRE.SW_PF",
"PublicDescription": "Non-SW-prefetch load dispatches that hit fill buffer allocated for S/W prefetch.",
@@ -738,8 +590,6 @@
},
{
"BriefDescription": "Cycles 4 Uops delivered by the LSD, but didn't come from the decoder",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"CounterMask": "4",
"EventCode": "0xA8",
"EventName": "LSD.CYCLES_4_UOPS",
@@ -749,8 +599,6 @@
},
{
"BriefDescription": "Cycles Uops delivered by the LSD, but didn't come from the decoder",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"CounterMask": "1",
"EventCode": "0xA8",
"EventName": "LSD.CYCLES_ACTIVE",
@@ -760,8 +608,6 @@
},
{
"BriefDescription": "Number of Uops delivered by the LSD.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xA8",
"EventName": "LSD.UOPS",
"SampleAfterValue": "2000003",
@@ -769,8 +615,6 @@
},
{
"BriefDescription": "Number of machine clears (nukes) of any type.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"CounterMask": "1",
"EdgeDetect": "1",
"EventCode": "0xC3",
@@ -780,8 +624,6 @@
},
{
"BriefDescription": "This event counts the number of executed Intel AVX masked load operations that refer to an illegal address range with the mask bits set to 0.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xC3",
"EventName": "MACHINE_CLEARS.MASKMOV",
"PublicDescription": "Counts the number of executed AVX masked load operations that refer to an illegal address range with the mask bits set to 0.",
@@ -790,8 +632,6 @@
},
{
"BriefDescription": "Self-modifying code (SMC) detected.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xC3",
"EventName": "MACHINE_CLEARS.SMC",
"PublicDescription": "Number of self-modifying-code machine clears detected.",
@@ -800,8 +640,6 @@
},
{
"BriefDescription": "Number of integer Move Elimination candidate uops that were eliminated.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x58",
"EventName": "MOVE_ELIMINATION.INT_ELIMINATED",
"SampleAfterValue": "1000003",
@@ -809,8 +647,6 @@
},
{
"BriefDescription": "Number of integer Move Elimination candidate uops that were not eliminated.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x58",
"EventName": "MOVE_ELIMINATION.INT_NOT_ELIMINATED",
"SampleAfterValue": "1000003",
@@ -818,8 +654,6 @@
},
{
"BriefDescription": "Number of times any microcode assist is invoked by HW upon uop writeback.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xC1",
"EventName": "OTHER_ASSISTS.ANY_WB_ASSIST",
"SampleAfterValue": "100003",
@@ -827,8 +661,6 @@
},
{
"BriefDescription": "Resource-related stall cycles",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xA2",
"EventName": "RESOURCE_STALLS.ANY",
"PublicDescription": "Cycles Allocation is stalled due to Resource Related reason.",
@@ -837,8 +669,6 @@
},
{
"BriefDescription": "Cycles stalled due to re-order buffer full.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xA2",
"EventName": "RESOURCE_STALLS.ROB",
"SampleAfterValue": "2000003",
@@ -846,8 +676,6 @@
},
{
"BriefDescription": "Cycles stalled due to no eligible RS entry available.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xA2",
"EventName": "RESOURCE_STALLS.RS",
"SampleAfterValue": "2000003",
@@ -855,8 +683,6 @@
},
{
"BriefDescription": "Cycles stalled due to no store buffers available. (not including draining form sync).",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xA2",
"EventName": "RESOURCE_STALLS.SB",
"PublicDescription": "Cycles stalled due to no store buffers available (not including draining form sync).",
@@ -865,8 +691,6 @@
},
{
"BriefDescription": "Count cases of saving new LBR",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xCC",
"EventName": "ROB_MISC_EVENTS.LBR_INSERTS",
"PublicDescription": "Count cases of saving new LBR records by hardware.",
@@ -875,8 +699,6 @@
},
{
"BriefDescription": "Cycles when Reservation Station (RS) is empty for the thread",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x5E",
"EventName": "RS_EVENTS.EMPTY_CYCLES",
"PublicDescription": "Cycles the RS is empty for the thread.",
@@ -885,8 +707,6 @@
},
{
"BriefDescription": "Counts end of periods where the Reservation Station (RS) was empty. Could be useful to precisely locate Frontend Latency Bound issues.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"CounterMask": "1",
"EdgeDetect": "1",
"EventCode": "0x5E",
@@ -897,8 +717,6 @@
},
{
"BriefDescription": "Cycles per thread when uops are dispatched to port 0",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xA1",
"EventName": "UOPS_DISPATCHED_PORT.PORT_0",
"PublicDescription": "Cycles which a Uop is dispatched on port 0.",
@@ -908,8 +726,6 @@
{
"AnyThread": "1",
"BriefDescription": "Cycles per core when uops are dispatched to port 0",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xA1",
"EventName": "UOPS_DISPATCHED_PORT.PORT_0_CORE",
"PublicDescription": "Cycles per core when uops are dispatched to port 0.",
@@ -918,8 +734,6 @@
},
{
"BriefDescription": "Cycles per thread when uops are dispatched to port 1",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xA1",
"EventName": "UOPS_DISPATCHED_PORT.PORT_1",
"PublicDescription": "Cycles which a Uop is dispatched on port 1.",
@@ -929,8 +743,6 @@
{
"AnyThread": "1",
"BriefDescription": "Cycles per core when uops are dispatched to port 1",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xA1",
"EventName": "UOPS_DISPATCHED_PORT.PORT_1_CORE",
"PublicDescription": "Cycles per core when uops are dispatched to port 1.",
@@ -939,8 +751,6 @@
},
{
"BriefDescription": "Cycles per thread when load or STA uops are dispatched to port 2",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xA1",
"EventName": "UOPS_DISPATCHED_PORT.PORT_2",
"PublicDescription": "Cycles which a Uop is dispatched on port 2.",
@@ -950,8 +760,6 @@
{
"AnyThread": "1",
"BriefDescription": "Uops dispatched to port 2, loads and stores per core (speculative and retired).",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xA1",
"EventName": "UOPS_DISPATCHED_PORT.PORT_2_CORE",
"SampleAfterValue": "2000003",
@@ -959,8 +767,6 @@
},
{
"BriefDescription": "Cycles per thread when load or STA uops are dispatched to port 3",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xA1",
"EventName": "UOPS_DISPATCHED_PORT.PORT_3",
"PublicDescription": "Cycles which a Uop is dispatched on port 3.",
@@ -970,8 +776,6 @@
{
"AnyThread": "1",
"BriefDescription": "Cycles per core when load or STA uops are dispatched to port 3",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xA1",
"EventName": "UOPS_DISPATCHED_PORT.PORT_3_CORE",
"PublicDescription": "Cycles per core when load or STA uops are dispatched to port 3.",
@@ -980,8 +784,6 @@
},
{
"BriefDescription": "Cycles per thread when uops are dispatched to port 4",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xA1",
"EventName": "UOPS_DISPATCHED_PORT.PORT_4",
"PublicDescription": "Cycles which a Uop is dispatched on port 4.",
@@ -991,8 +793,6 @@
{
"AnyThread": "1",
"BriefDescription": "Cycles per core when uops are dispatched to port 4",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xA1",
"EventName": "UOPS_DISPATCHED_PORT.PORT_4_CORE",
"PublicDescription": "Cycles per core when uops are dispatched to port 4.",
@@ -1001,8 +801,6 @@
},
{
"BriefDescription": "Cycles per thread when uops are dispatched to port 5",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xA1",
"EventName": "UOPS_DISPATCHED_PORT.PORT_5",
"PublicDescription": "Cycles which a Uop is dispatched on port 5.",
@@ -1012,8 +810,6 @@
{
"AnyThread": "1",
"BriefDescription": "Cycles per core when uops are dispatched to port 5",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xA1",
"EventName": "UOPS_DISPATCHED_PORT.PORT_5_CORE",
"PublicDescription": "Cycles per core when uops are dispatched to port 5.",
@@ -1022,8 +818,6 @@
},
{
"BriefDescription": "Number of uops executed on the core.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xB1",
"EventName": "UOPS_EXECUTED.CORE",
"PublicDescription": "Counts total number of uops to be executed per-core each cycle.",
@@ -1032,8 +826,6 @@
},
{
"BriefDescription": "Cycles at least 1 micro-op is executed from any thread on physical core",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"CounterMask": "1",
"EventCode": "0xB1",
"EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_1",
@@ -1043,8 +835,6 @@
},
{
"BriefDescription": "Cycles at least 2 micro-op is executed from any thread on physical core",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"CounterMask": "2",
"EventCode": "0xB1",
"EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_2",
@@ -1054,8 +844,6 @@
},
{
"BriefDescription": "Cycles at least 3 micro-op is executed from any thread on physical core",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"CounterMask": "3",
"EventCode": "0xB1",
"EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_3",
@@ -1065,8 +853,6 @@
},
{
"BriefDescription": "Cycles at least 4 micro-op is executed from any thread on physical core",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"CounterMask": "4",
"EventCode": "0xB1",
"EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_4",
@@ -1076,8 +862,6 @@
},
{
"BriefDescription": "Cycles with no micro-ops executed from any thread on physical core",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xB1",
"EventName": "UOPS_EXECUTED.CORE_CYCLES_NONE",
"Invert": "1",
@@ -1087,8 +871,6 @@
},
{
"BriefDescription": "Cycles where at least 1 uop was executed per-thread",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"CounterMask": "1",
"EventCode": "0xB1",
"EventName": "UOPS_EXECUTED.CYCLES_GE_1_UOP_EXEC",
@@ -1098,8 +880,6 @@
},
{
"BriefDescription": "Cycles where at least 2 uops were executed per-thread",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"CounterMask": "2",
"EventCode": "0xB1",
"EventName": "UOPS_EXECUTED.CYCLES_GE_2_UOPS_EXEC",
@@ -1109,8 +889,6 @@
},
{
"BriefDescription": "Cycles where at least 3 uops were executed per-thread",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"CounterMask": "3",
"EventCode": "0xB1",
"EventName": "UOPS_EXECUTED.CYCLES_GE_3_UOPS_EXEC",
@@ -1120,8 +898,6 @@
},
{
"BriefDescription": "Cycles where at least 4 uops were executed per-thread",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"CounterMask": "4",
"EventCode": "0xB1",
"EventName": "UOPS_EXECUTED.CYCLES_GE_4_UOPS_EXEC",
@@ -1131,8 +907,6 @@
},
{
"BriefDescription": "Counts number of cycles no uops were dispatched to be executed on this thread.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"CounterMask": "1",
"EventCode": "0xB1",
"EventName": "UOPS_EXECUTED.STALL_CYCLES",
@@ -1142,8 +916,6 @@
},
{
"BriefDescription": "Counts the number of uops to be executed per-thread each cycle.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xB1",
"EventName": "UOPS_EXECUTED.THREAD",
"PublicDescription": "Counts total number of uops to be executed per-thread each cycle. Set Cmask = 1, INV =1 to count stall cycles.",
@@ -1152,8 +924,6 @@
},
{
"BriefDescription": "Uops that Resource Allocation Table (RAT) issues to Reservation Station (RS)",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x0E",
"EventName": "UOPS_ISSUED.ANY",
"PublicDescription": "Increments each cycle the # of Uops issued by the RAT to RS. Set Cmask = 1, Inv = 1, Any= 1to count stalled cycles of this core.",
@@ -1163,8 +933,6 @@
{
"AnyThread": "1",
"BriefDescription": "Cycles when Resource Allocation Table (RAT) does not issue Uops to Reservation Station (RS) for all threads",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"CounterMask": "1",
"EventCode": "0x0E",
"EventName": "UOPS_ISSUED.CORE_STALL_CYCLES",
@@ -1175,8 +943,6 @@
},
{
"BriefDescription": "Number of flags-merge uops being allocated.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x0E",
"EventName": "UOPS_ISSUED.FLAGS_MERGE",
"PublicDescription": "Number of flags-merge uops allocated. Such uops adds delay.",
@@ -1185,8 +951,6 @@
},
{
"BriefDescription": "Number of Multiply packed/scalar single precision uops allocated",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x0E",
"EventName": "UOPS_ISSUED.SINGLE_MUL",
"PublicDescription": "Number of multiply packed/scalar single precision uops allocated.",
@@ -1195,8 +959,6 @@
},
{
"BriefDescription": "Number of slow LEA uops being allocated. A uop is generally considered SlowLea if it has 3 sources (e.g. 2 sources + immediate) regardless if as a result of LEA instruction or not.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x0E",
"EventName": "UOPS_ISSUED.SLOW_LEA",
"PublicDescription": "Number of slow LEA or similar uops allocated. Such uop has 3 sources (e.g. 2 sources + immediate) regardless if as a result of LEA instruction or not.",
@@ -1205,8 +967,6 @@
},
{
"BriefDescription": "Cycles when Resource Allocation Table (RAT) does not issue Uops to Reservation Station (RS) for the thread",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"CounterMask": "1",
"EventCode": "0x0E",
"EventName": "UOPS_ISSUED.STALL_CYCLES",
@@ -1217,8 +977,6 @@
},
{
"BriefDescription": "Retired uops.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xC2",
"EventName": "UOPS_RETIRED.ALL",
"PEBS": "1",
@@ -1228,8 +986,6 @@
{
"AnyThread": "1",
"BriefDescription": "Cycles without actually retired uops.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"CounterMask": "1",
"EventCode": "0xC2",
"EventName": "UOPS_RETIRED.CORE_STALL_CYCLES",
@@ -1239,8 +995,6 @@
},
{
"BriefDescription": "Retirement slots used.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xC2",
"EventName": "UOPS_RETIRED.RETIRE_SLOTS",
"PEBS": "1",
@@ -1249,8 +1003,6 @@
},
{
"BriefDescription": "Cycles without actually retired uops.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"CounterMask": "1",
"EventCode": "0xC2",
"EventName": "UOPS_RETIRED.STALL_CYCLES",
@@ -1260,8 +1012,6 @@
},
{
"BriefDescription": "Cycles with less than 10 actually retired uops.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3",
"CounterMask": "10",
"EventCode": "0xC2",
"EventName": "UOPS_RETIRED.TOTAL_CYCLES",
diff --git a/tools/perf/pmu-events/arch/x86/ivytown/uncore-cache.json b/tools/perf/pmu-events/arch/x86/ivytown/uncore-cache.json
index c118ff54c30e..521175881173 100644
--- a/tools/perf/pmu-events/arch/x86/ivytown/uncore-cache.json
+++ b/tools/perf/pmu-events/arch/x86/ivytown/uncore-cache.json
@@ -1,14 +1,12 @@
[
{
"BriefDescription": "Uncore Clocks",
- "Counter": "0,1,2,3",
"EventName": "UNC_C_CLOCKTICKS",
"PerPkg": "1",
"Unit": "CBO"
},
{
"BriefDescription": "Counter 0 Occupancy",
- "Counter": "1,2,3",
"EventCode": "0x1f",
"EventName": "UNC_C_COUNTER0_OCCUPANCY",
"PerPkg": "1",
@@ -17,7 +15,6 @@
},
{
"BriefDescription": "Cache Lookups; Any Request",
- "Counter": "0,1",
"EventCode": "0x34",
"EventName": "UNC_C_LLC_LOOKUP.ANY",
"PerPkg": "1",
@@ -27,7 +24,6 @@
},
{
"BriefDescription": "Cache Lookups; Data Read Request",
- "Counter": "0,1",
"EventCode": "0x34",
"EventName": "UNC_C_LLC_LOOKUP.DATA_READ",
"PerPkg": "1",
@@ -37,7 +33,6 @@
},
{
"BriefDescription": "Cache Lookups; Lookups that Match NID",
- "Counter": "0,1",
"EventCode": "0x34",
"EventName": "UNC_C_LLC_LOOKUP.NID",
"PerPkg": "1",
@@ -47,7 +42,6 @@
},
{
"BriefDescription": "Cache Lookups; External Snoop Request",
- "Counter": "0,1",
"EventCode": "0x34",
"EventName": "UNC_C_LLC_LOOKUP.REMOTE_SNOOP",
"PerPkg": "1",
@@ -57,7 +51,6 @@
},
{
"BriefDescription": "Cache Lookups; Write Requests",
- "Counter": "0,1",
"EventCode": "0x34",
"EventName": "UNC_C_LLC_LOOKUP.WRITE",
"PerPkg": "1",
@@ -67,7 +60,6 @@
},
{
"BriefDescription": "Lines Victimized; Lines in E state",
- "Counter": "0,1",
"EventCode": "0x37",
"EventName": "UNC_C_LLC_VICTIMS.E_STATE",
"PerPkg": "1",
@@ -77,7 +69,6 @@
},
{
"BriefDescription": "Lines Victimized",
- "Counter": "0,1",
"EventCode": "0x37",
"EventName": "UNC_C_LLC_VICTIMS.MISS",
"PerPkg": "1",
@@ -87,7 +78,6 @@
},
{
"BriefDescription": "Lines Victimized; Lines in M state",
- "Counter": "0,1",
"EventCode": "0x37",
"EventName": "UNC_C_LLC_VICTIMS.M_STATE",
"PerPkg": "1",
@@ -97,7 +87,6 @@
},
{
"BriefDescription": "Lines Victimized; Victimized Lines that Match NID",
- "Counter": "0,1",
"EventCode": "0x37",
"EventName": "UNC_C_LLC_VICTIMS.NID",
"PerPkg": "1",
@@ -107,7 +96,6 @@
},
{
"BriefDescription": "Lines Victimized; Lines in S State",
- "Counter": "0,1",
"EventCode": "0x37",
"EventName": "UNC_C_LLC_VICTIMS.S_STATE",
"PerPkg": "1",
@@ -117,7 +105,6 @@
},
{
"BriefDescription": "Cbo Misc; RFO HitS",
- "Counter": "0,1",
"EventCode": "0x39",
"EventName": "UNC_C_MISC.RFO_HIT_S",
"PerPkg": "1",
@@ -127,7 +114,6 @@
},
{
"BriefDescription": "Cbo Misc; Silent Snoop Eviction",
- "Counter": "0,1",
"EventCode": "0x39",
"EventName": "UNC_C_MISC.RSPI_WAS_FSE",
"PerPkg": "1",
@@ -137,7 +123,6 @@
},
{
"BriefDescription": "Cbo Misc",
- "Counter": "0,1",
"EventCode": "0x39",
"EventName": "UNC_C_MISC.STARTED",
"PerPkg": "1",
@@ -147,7 +132,6 @@
},
{
"BriefDescription": "Cbo Misc; Write Combining Aliasing",
- "Counter": "0,1",
"EventCode": "0x39",
"EventName": "UNC_C_MISC.WC_ALIASING",
"PerPkg": "1",
@@ -157,7 +141,6 @@
},
{
"BriefDescription": "LRU Queue; LRU Age 0",
- "Counter": "0,1",
"EventCode": "0x3c",
"EventName": "UNC_C_QLRU.AGE0",
"PerPkg": "1",
@@ -167,7 +150,6 @@
},
{
"BriefDescription": "LRU Queue; LRU Age 1",
- "Counter": "0,1",
"EventCode": "0x3c",
"EventName": "UNC_C_QLRU.AGE1",
"PerPkg": "1",
@@ -177,7 +159,6 @@
},
{
"BriefDescription": "LRU Queue; LRU Age 2",
- "Counter": "0,1",
"EventCode": "0x3c",
"EventName": "UNC_C_QLRU.AGE2",
"PerPkg": "1",
@@ -187,7 +168,6 @@
},
{
"BriefDescription": "LRU Queue; LRU Age 3",
- "Counter": "0,1",
"EventCode": "0x3c",
"EventName": "UNC_C_QLRU.AGE3",
"PerPkg": "1",
@@ -197,7 +177,6 @@
},
{
"BriefDescription": "LRU Queue; LRU Bits Decremented",
- "Counter": "0,1",
"EventCode": "0x3c",
"EventName": "UNC_C_QLRU.LRU_DECREMENT",
"PerPkg": "1",
@@ -207,7 +186,6 @@
},
{
"BriefDescription": "LRU Queue; Non-0 Aged Victim",
- "Counter": "0,1",
"EventCode": "0x3c",
"EventName": "UNC_C_QLRU.VICTIM_NON_ZERO",
"PerPkg": "1",
@@ -217,17 +195,15 @@
},
{
"BriefDescription": "AD Ring In Use; Counterclockwise",
- "Counter": "2,3",
"EventCode": "0x1B",
"EventName": "UNC_C_RING_AD_USED.CCW",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the AD ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop. We really have two rings in JKT -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.",
- "UMask": "0xC",
+ "UMask": "0xc",
"Unit": "CBO"
},
{
"BriefDescription": "AD Ring In Use; Clockwise",
- "Counter": "2,3",
"EventCode": "0x1B",
"EventName": "UNC_C_RING_AD_USED.CW",
"PerPkg": "1",
@@ -237,17 +213,15 @@
},
{
"BriefDescription": "AD Ring In Use; Down",
- "Counter": "2,3",
"EventCode": "0x1B",
"EventName": "UNC_C_RING_AD_USED.DOWN",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the AD ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop. We really have two rings in JKT -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.",
- "UMask": "0xCC",
+ "UMask": "0xcc",
"Unit": "CBO"
},
{
"BriefDescription": "AD Ring In Use; Down and Even on Vring 0",
- "Counter": "2,3",
"EventCode": "0x1b",
"EventName": "UNC_C_RING_AD_USED.DOWN_VR0_EVEN",
"PerPkg": "1",
@@ -257,7 +231,6 @@
},
{
"BriefDescription": "AD Ring In Use; Down and Odd on Vring 0",
- "Counter": "2,3",
"EventCode": "0x1b",
"EventName": "UNC_C_RING_AD_USED.DOWN_VR0_ODD",
"PerPkg": "1",
@@ -267,7 +240,6 @@
},
{
"BriefDescription": "AD Ring In Use; Down and Even on VRing 1",
- "Counter": "2,3",
"EventCode": "0x1b",
"EventName": "UNC_C_RING_AD_USED.DOWN_VR1_EVEN",
"PerPkg": "1",
@@ -277,7 +249,6 @@
},
{
"BriefDescription": "AD Ring In Use; Down and Odd on VRing 1",
- "Counter": "2,3",
"EventCode": "0x1b",
"EventName": "UNC_C_RING_AD_USED.DOWN_VR1_ODD",
"PerPkg": "1",
@@ -287,7 +258,6 @@
},
{
"BriefDescription": "AD Ring In Use; Up",
- "Counter": "2,3",
"EventCode": "0x1B",
"EventName": "UNC_C_RING_AD_USED.UP",
"PerPkg": "1",
@@ -297,7 +267,6 @@
},
{
"BriefDescription": "AD Ring In Use; Up and Even on Vring 0",
- "Counter": "2,3",
"EventCode": "0x1b",
"EventName": "UNC_C_RING_AD_USED.UP_VR0_EVEN",
"PerPkg": "1",
@@ -307,7 +276,6 @@
},
{
"BriefDescription": "AD Ring In Use; Up and Odd on Vring 0",
- "Counter": "2,3",
"EventCode": "0x1b",
"EventName": "UNC_C_RING_AD_USED.UP_VR0_ODD",
"PerPkg": "1",
@@ -317,7 +285,6 @@
},
{
"BriefDescription": "AD Ring In Use; Up and Even on VRing 1",
- "Counter": "2,3",
"EventCode": "0x1b",
"EventName": "UNC_C_RING_AD_USED.UP_VR1_EVEN",
"PerPkg": "1",
@@ -327,7 +294,6 @@
},
{
"BriefDescription": "AD Ring In Use; Up and Odd on VRing 1",
- "Counter": "2,3",
"EventCode": "0x1b",
"EventName": "UNC_C_RING_AD_USED.UP_VR1_ODD",
"PerPkg": "1",
@@ -337,17 +303,15 @@
},
{
"BriefDescription": "AK Ring In Use; Counterclockwise",
- "Counter": "2,3",
"EventCode": "0x1C",
"EventName": "UNC_C_RING_AK_USED.CCW",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the AK ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop.We really have two rings in JKT -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.",
- "UMask": "0xC",
+ "UMask": "0xc",
"Unit": "CBO"
},
{
"BriefDescription": "AK Ring In Use; Clockwise",
- "Counter": "2,3",
"EventCode": "0x1C",
"EventName": "UNC_C_RING_AK_USED.CW",
"PerPkg": "1",
@@ -357,17 +321,15 @@
},
{
"BriefDescription": "AK Ring In Use; Down",
- "Counter": "2,3",
"EventCode": "0x1C",
"EventName": "UNC_C_RING_AK_USED.DOWN",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the AK ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop.We really have two rings in JKT -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.",
- "UMask": "0xCC",
+ "UMask": "0xcc",
"Unit": "CBO"
},
{
"BriefDescription": "AK Ring In Use; Down and Even on Vring 0",
- "Counter": "2,3",
"EventCode": "0x1c",
"EventName": "UNC_C_RING_AK_USED.DOWN_VR0_EVEN",
"PerPkg": "1",
@@ -377,7 +339,6 @@
},
{
"BriefDescription": "AK Ring In Use; Down and Odd on Vring 0",
- "Counter": "2,3",
"EventCode": "0x1c",
"EventName": "UNC_C_RING_AK_USED.DOWN_VR0_ODD",
"PerPkg": "1",
@@ -387,7 +348,6 @@
},
{
"BriefDescription": "AK Ring In Use; Down and Even on VRing 1",
- "Counter": "2,3",
"EventCode": "0x1c",
"EventName": "UNC_C_RING_AK_USED.DOWN_VR1_EVEN",
"PerPkg": "1",
@@ -397,7 +357,6 @@
},
{
"BriefDescription": "AK Ring In Use; Down and Odd on VRing 1",
- "Counter": "2,3",
"EventCode": "0x1c",
"EventName": "UNC_C_RING_AK_USED.DOWN_VR1_ODD",
"PerPkg": "1",
@@ -407,7 +366,6 @@
},
{
"BriefDescription": "AK Ring In Use; Up",
- "Counter": "2,3",
"EventCode": "0x1C",
"EventName": "UNC_C_RING_AK_USED.UP",
"PerPkg": "1",
@@ -417,7 +375,6 @@
},
{
"BriefDescription": "AK Ring In Use; Up and Even on Vring 0",
- "Counter": "2,3",
"EventCode": "0x1c",
"EventName": "UNC_C_RING_AK_USED.UP_VR0_EVEN",
"PerPkg": "1",
@@ -427,7 +384,6 @@
},
{
"BriefDescription": "AK Ring In Use; Up and Odd on Vring 0",
- "Counter": "2,3",
"EventCode": "0x1c",
"EventName": "UNC_C_RING_AK_USED.UP_VR0_ODD",
"PerPkg": "1",
@@ -437,7 +393,6 @@
},
{
"BriefDescription": "AK Ring In Use; Up and Even on VRing 1",
- "Counter": "2,3",
"EventCode": "0x1c",
"EventName": "UNC_C_RING_AK_USED.UP_VR1_EVEN",
"PerPkg": "1",
@@ -447,7 +402,6 @@
},
{
"BriefDescription": "AK Ring In Use; Up and Odd on VRing 1",
- "Counter": "2,3",
"EventCode": "0x1c",
"EventName": "UNC_C_RING_AK_USED.UP_VR1_ODD",
"PerPkg": "1",
@@ -457,17 +411,15 @@
},
{
"BriefDescription": "BL Ring in Use; Counterclockwise",
- "Counter": "2,3",
"EventCode": "0x1D",
"EventName": "UNC_C_RING_BL_USED.CCW",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the BL ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop.We really have two rings in JKT -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.",
- "UMask": "0xC",
+ "UMask": "0xc",
"Unit": "CBO"
},
{
"BriefDescription": "BL Ring in Use; Clockwise",
- "Counter": "2,3",
"EventCode": "0x1D",
"EventName": "UNC_C_RING_BL_USED.CW",
"PerPkg": "1",
@@ -477,17 +429,15 @@
},
{
"BriefDescription": "BL Ring in Use; Down",
- "Counter": "2,3",
"EventCode": "0x1D",
"EventName": "UNC_C_RING_BL_USED.DOWN",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the BL ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop.We really have two rings in JKT -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.",
- "UMask": "0xCC",
+ "UMask": "0xcc",
"Unit": "CBO"
},
{
"BriefDescription": "BL Ring in Use; Down and Even on Vring 0",
- "Counter": "2,3",
"EventCode": "0x1d",
"EventName": "UNC_C_RING_BL_USED.DOWN_VR0_EVEN",
"PerPkg": "1",
@@ -497,7 +447,6 @@
},
{
"BriefDescription": "BL Ring in Use; Down and Odd on Vring 0",
- "Counter": "2,3",
"EventCode": "0x1d",
"EventName": "UNC_C_RING_BL_USED.DOWN_VR0_ODD",
"PerPkg": "1",
@@ -507,7 +456,6 @@
},
{
"BriefDescription": "BL Ring in Use; Down and Even on VRing 1",
- "Counter": "2,3",
"EventCode": "0x1d",
"EventName": "UNC_C_RING_BL_USED.DOWN_VR1_EVEN",
"PerPkg": "1",
@@ -517,7 +465,6 @@
},
{
"BriefDescription": "BL Ring in Use; Down and Odd on VRing 1",
- "Counter": "2,3",
"EventCode": "0x1d",
"EventName": "UNC_C_RING_BL_USED.DOWN_VR1_ODD",
"PerPkg": "1",
@@ -527,7 +474,6 @@
},
{
"BriefDescription": "BL Ring in Use; Up",
- "Counter": "2,3",
"EventCode": "0x1D",
"EventName": "UNC_C_RING_BL_USED.UP",
"PerPkg": "1",
@@ -537,7 +483,6 @@
},
{
"BriefDescription": "BL Ring in Use; Up and Even on Vring 0",
- "Counter": "2,3",
"EventCode": "0x1d",
"EventName": "UNC_C_RING_BL_USED.UP_VR0_EVEN",
"PerPkg": "1",
@@ -547,7 +492,6 @@
},
{
"BriefDescription": "BL Ring in Use; Up and Odd on Vring 0",
- "Counter": "2,3",
"EventCode": "0x1d",
"EventName": "UNC_C_RING_BL_USED.UP_VR0_ODD",
"PerPkg": "1",
@@ -557,7 +501,6 @@
},
{
"BriefDescription": "BL Ring in Use; Up and Even on VRing 1",
- "Counter": "2,3",
"EventCode": "0x1d",
"EventName": "UNC_C_RING_BL_USED.UP_VR1_EVEN",
"PerPkg": "1",
@@ -567,7 +510,6 @@
},
{
"BriefDescription": "BL Ring in Use; Up and Odd on VRing 1",
- "Counter": "2,3",
"EventCode": "0x1d",
"EventName": "UNC_C_RING_BL_USED.UP_VR1_ODD",
"PerPkg": "1",
@@ -577,7 +519,6 @@
},
{
"BriefDescription": "Number of LLC responses that bounced on the Ring.",
- "Counter": "0,1",
"EventCode": "0x5",
"EventName": "UNC_C_RING_BOUNCES.AD_IRQ",
"PerPkg": "1",
@@ -586,7 +527,6 @@
},
{
"BriefDescription": "Number of LLC responses that bounced on the Ring.; Acknowledgements to core",
- "Counter": "0,1",
"EventCode": "0x5",
"EventName": "UNC_C_RING_BOUNCES.AK",
"PerPkg": "1",
@@ -595,7 +535,6 @@
},
{
"BriefDescription": "Number of LLC responses that bounced on the Ring.: Acknowledgements to core",
- "Counter": "0,1",
"EventCode": "0x5",
"EventName": "UNC_C_RING_BOUNCES.AK_CORE",
"PerPkg": "1",
@@ -604,7 +543,6 @@
},
{
"BriefDescription": "Number of LLC responses that bounced on the Ring.; Data Responses to core",
- "Counter": "0,1",
"EventCode": "0x5",
"EventName": "UNC_C_RING_BOUNCES.BL",
"PerPkg": "1",
@@ -613,7 +551,6 @@
},
{
"BriefDescription": "Number of LLC responses that bounced on the Ring.: Data Responses to core",
- "Counter": "0,1",
"EventCode": "0x5",
"EventName": "UNC_C_RING_BOUNCES.BL_CORE",
"PerPkg": "1",
@@ -622,7 +559,6 @@
},
{
"BriefDescription": "Number of LLC responses that bounced on the Ring.; Snoops of processor's cache.",
- "Counter": "0,1",
"EventCode": "0x5",
"EventName": "UNC_C_RING_BOUNCES.IV",
"PerPkg": "1",
@@ -631,7 +567,6 @@
},
{
"BriefDescription": "Number of LLC responses that bounced on the Ring.: Snoops of processor's cache.",
- "Counter": "0,1",
"EventCode": "0x5",
"EventName": "UNC_C_RING_BOUNCES.IV_CORE",
"PerPkg": "1",
@@ -640,27 +575,24 @@
},
{
"BriefDescription": "IV Ring in Use; Any",
- "Counter": "2,3",
"EventCode": "0x1e",
"EventName": "UNC_C_RING_IV_USED.ANY",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the IV ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop.; Filters any polarity",
- "UMask": "0xF",
+ "UMask": "0xf",
"Unit": "CBO"
},
{
"BriefDescription": "IV Ring in Use; Down",
- "Counter": "2,3",
"EventCode": "0x1e",
"EventName": "UNC_C_RING_IV_USED.DOWN",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the IV ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop.; Filters for Down polarity",
- "UMask": "0xCC",
+ "UMask": "0xcc",
"Unit": "CBO"
},
{
"BriefDescription": "IV Ring in Use; Up",
- "Counter": "2,3",
"EventCode": "0x1e",
"EventName": "UNC_C_RING_IV_USED.UP",
"PerPkg": "1",
@@ -668,9 +600,35 @@
"UMask": "0x33",
"Unit": "CBO"
},
+ {
+ "EventCode": "0x6",
+ "EventName": "UNC_C_RING_SINK_STARVED.AD_IPQ",
+ "PerPkg": "1",
+ "UMask": "0x2",
+ "Unit": "CBO"
+ },
+ {
+ "EventCode": "0x6",
+ "EventName": "UNC_C_RING_SINK_STARVED.AD_IRQ",
+ "PerPkg": "1",
+ "UMask": "0x1",
+ "Unit": "CBO"
+ },
+ {
+ "EventCode": "0x6",
+ "EventName": "UNC_C_RING_SINK_STARVED.IV",
+ "PerPkg": "1",
+ "UMask": "0x10",
+ "Unit": "CBO"
+ },
+ {
+ "EventCode": "0x7",
+ "EventName": "UNC_C_RING_SRC_THRTL",
+ "PerPkg": "1",
+ "Unit": "CBO"
+ },
{
"BriefDescription": "Ingress Arbiter Blocking Cycles; IRQ",
- "Counter": "0,1",
"EventCode": "0x12",
"EventName": "UNC_C_RxR_EXT_STARVED.IPQ",
"PerPkg": "1",
@@ -680,7 +638,6 @@
},
{
"BriefDescription": "Ingress Arbiter Blocking Cycles; IPQ",
- "Counter": "0,1",
"EventCode": "0x12",
"EventName": "UNC_C_RxR_EXT_STARVED.IRQ",
"PerPkg": "1",
@@ -690,7 +647,6 @@
},
{
"BriefDescription": "Ingress Arbiter Blocking Cycles; ISMQ_BID",
- "Counter": "0,1",
"EventCode": "0x12",
"EventName": "UNC_C_RxR_EXT_STARVED.ISMQ_BIDS",
"PerPkg": "1",
@@ -700,7 +656,6 @@
},
{
"BriefDescription": "Ingress Arbiter Blocking Cycles",
- "Counter": "0,1",
"EventCode": "0x12",
"EventName": "UNC_C_RxR_EXT_STARVED.PRQ",
"PerPkg": "1",
@@ -710,7 +665,6 @@
},
{
"BriefDescription": "Ingress Allocations; IPQ",
- "Counter": "0,1",
"EventCode": "0x13",
"EventName": "UNC_C_RxR_INSERTS.IPQ",
"PerPkg": "1",
@@ -720,7 +674,6 @@
},
{
"BriefDescription": "Ingress Allocations; IRQ",
- "Counter": "0,1",
"EventCode": "0x13",
"EventName": "UNC_C_RxR_INSERTS.IRQ",
"PerPkg": "1",
@@ -730,7 +683,6 @@
},
{
"BriefDescription": "Ingress Allocations; IRQ Rejected",
- "Counter": "0,1",
"EventCode": "0x13",
"EventName": "UNC_C_RxR_INSERTS.IRQ_REJ",
"PerPkg": "1",
@@ -740,7 +692,6 @@
},
{
"BriefDescription": "Ingress Allocations: IRQ Rejected",
- "Counter": "0,1",
"EventCode": "0x13",
"EventName": "UNC_C_RxR_INSERTS.IRQ_REJECTED",
"PerPkg": "1",
@@ -750,7 +701,6 @@
},
{
"BriefDescription": "Ingress Allocations; VFIFO",
- "Counter": "0,1",
"EventCode": "0x13",
"EventName": "UNC_C_RxR_INSERTS.VFIFO",
"PerPkg": "1",
@@ -760,7 +710,6 @@
},
{
"BriefDescription": "Ingress Internal Starvation Cycles; IPQ",
- "Counter": "0,1",
"EventCode": "0x14",
"EventName": "UNC_C_RxR_INT_STARVED.IPQ",
"PerPkg": "1",
@@ -770,7 +719,6 @@
},
{
"BriefDescription": "Ingress Internal Starvation Cycles; IRQ",
- "Counter": "0,1",
"EventCode": "0x14",
"EventName": "UNC_C_RxR_INT_STARVED.IRQ",
"PerPkg": "1",
@@ -780,7 +728,6 @@
},
{
"BriefDescription": "Ingress Internal Starvation Cycles; ISMQ",
- "Counter": "0,1",
"EventCode": "0x14",
"EventName": "UNC_C_RxR_INT_STARVED.ISMQ",
"PerPkg": "1",
@@ -790,7 +737,6 @@
},
{
"BriefDescription": "Probe Queue Retries; Address Conflict",
- "Counter": "0,1",
"EventCode": "0x31",
"EventName": "UNC_C_RxR_IPQ_RETRY.ADDR_CONFLICT",
"PerPkg": "1",
@@ -800,7 +746,6 @@
},
{
"BriefDescription": "Probe Queue Retries; Any Reject",
- "Counter": "0,1",
"EventCode": "0x31",
"EventName": "UNC_C_RxR_IPQ_RETRY.ANY",
"PerPkg": "1",
@@ -810,7 +755,6 @@
},
{
"BriefDescription": "Probe Queue Retries; No Egress Credits",
- "Counter": "0,1",
"EventCode": "0x31",
"EventName": "UNC_C_RxR_IPQ_RETRY.FULL",
"PerPkg": "1",
@@ -820,7 +764,6 @@
},
{
"BriefDescription": "Probe Queue Retries; No QPI Credits",
- "Counter": "0,1",
"EventCode": "0x31",
"EventName": "UNC_C_RxR_IPQ_RETRY.QPI_CREDITS",
"PerPkg": "1",
@@ -830,7 +773,6 @@
},
{
"BriefDescription": "Ingress Request Queue Rejects; Address Conflict",
- "Counter": "0,1",
"EventCode": "0x32",
"EventName": "UNC_C_RxR_IRQ_RETRY.ADDR_CONFLICT",
"PerPkg": "1",
@@ -840,7 +782,6 @@
},
{
"BriefDescription": "Ingress Request Queue Rejects; Any Reject",
- "Counter": "0,1",
"EventCode": "0x32",
"EventName": "UNC_C_RxR_IRQ_RETRY.ANY",
"PerPkg": "1",
@@ -850,7 +791,6 @@
},
{
"BriefDescription": "Ingress Request Queue Rejects; No Egress Credits",
- "Counter": "0,1",
"EventCode": "0x32",
"EventName": "UNC_C_RxR_IRQ_RETRY.FULL",
"PerPkg": "1",
@@ -860,7 +800,6 @@
},
{
"BriefDescription": "Ingress Request Queue Rejects; No IIO Credits",
- "Counter": "0,1",
"EventCode": "0x32",
"EventName": "UNC_C_RxR_IRQ_RETRY.IIO_CREDITS",
"PerPkg": "1",
@@ -870,7 +809,6 @@
},
{
"BriefDescription": "Ingress Request Queue Rejects; No QPI Credits",
- "Counter": "0,1",
"EventCode": "0x32",
"EventName": "UNC_C_RxR_IRQ_RETRY.QPI_CREDITS",
"PerPkg": "1",
@@ -880,7 +818,6 @@
},
{
"BriefDescription": "Ingress Request Queue Rejects; No RTIDs",
- "Counter": "0,1",
"EventCode": "0x32",
"EventName": "UNC_C_RxR_IRQ_RETRY.RTID",
"PerPkg": "1",
@@ -890,7 +827,6 @@
},
{
"BriefDescription": "ISMQ Retries; Any Reject",
- "Counter": "0,1",
"EventCode": "0x33",
"EventName": "UNC_C_RxR_ISMQ_RETRY.ANY",
"PerPkg": "1",
@@ -900,7 +836,6 @@
},
{
"BriefDescription": "ISMQ Retries; No Egress Credits",
- "Counter": "0,1",
"EventCode": "0x33",
"EventName": "UNC_C_RxR_ISMQ_RETRY.FULL",
"PerPkg": "1",
@@ -910,7 +845,6 @@
},
{
"BriefDescription": "ISMQ Retries; No IIO Credits",
- "Counter": "0,1",
"EventCode": "0x33",
"EventName": "UNC_C_RxR_ISMQ_RETRY.IIO_CREDITS",
"PerPkg": "1",
@@ -920,7 +854,6 @@
},
{
"BriefDescription": "ISMQ Retries; No QPI Credits",
- "Counter": "0,1",
"EventCode": "0x33",
"EventName": "UNC_C_RxR_ISMQ_RETRY.QPI_CREDITS",
"PerPkg": "1",
@@ -930,7 +863,6 @@
},
{
"BriefDescription": "ISMQ Retries; No RTIDs",
- "Counter": "0,1",
"EventCode": "0x33",
"EventName": "UNC_C_RxR_ISMQ_RETRY.RTID",
"PerPkg": "1",
@@ -940,7 +872,6 @@
},
{
"BriefDescription": "ISMQ Retries; No WB Credits",
- "Counter": "0,1",
"EventCode": "0x33",
"EventName": "UNC_C_RxR_ISMQ_RETRY.WB_CREDITS",
"PerPkg": "1",
@@ -995,7 +926,6 @@
},
{
"BriefDescription": "TOR Inserts; All",
- "Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.ALL",
"PerPkg": "1",
@@ -1005,7 +935,6 @@
},
{
"BriefDescription": "TOR Inserts; Evictions",
- "Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.EVICTION",
"PerPkg": "1",
@@ -1015,7 +944,6 @@
},
{
"BriefDescription": "TOR Inserts; Local Memory",
- "Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.LOCAL",
"PerPkg": "1",
@@ -1025,7 +953,6 @@
},
{
"BriefDescription": "TOR Inserts; Local Memory - Opcode Matched",
- "Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.LOCAL_OPCODE",
"PerPkg": "1",
@@ -1035,17 +962,15 @@
},
{
"BriefDescription": "TOR Inserts; Misses to Local Memory",
- "Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.MISS_LOCAL",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that are satisfied by locally HOMed memory.",
- "UMask": "0x2A",
+ "UMask": "0x2a",
"Unit": "CBO"
},
{
"BriefDescription": "TOR Inserts; Misses to Local Memory - Opcode Matched",
- "Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.MISS_LOCAL_OPCODE",
"PerPkg": "1",
@@ -1055,7 +980,6 @@
},
{
"BriefDescription": "TOR Inserts; Miss Opcode Match",
- "Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.MISS_OPCODE",
"PerPkg": "1",
@@ -1065,17 +989,15 @@
},
{
"BriefDescription": "TOR Inserts; Misses to Remote Memory",
- "Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.MISS_REMOTE",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that are satisfied by remote caches or remote memory.",
- "UMask": "0x8A",
+ "UMask": "0x8a",
"Unit": "CBO"
},
{
"BriefDescription": "TOR Inserts; Misses to Remote Memory - Opcode Matched",
- "Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.MISS_REMOTE_OPCODE",
"PerPkg": "1",
@@ -1085,7 +1007,6 @@
},
{
"BriefDescription": "TOR Inserts; NID Matched",
- "Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.NID_ALL",
"PerPkg": "1",
@@ -1095,7 +1016,6 @@
},
{
"BriefDescription": "TOR Inserts; NID Matched Evictions",
- "Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.NID_EVICTION",
"PerPkg": "1",
@@ -1105,17 +1025,15 @@
},
{
"BriefDescription": "TOR Inserts; NID Matched Miss All",
- "Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.NID_MISS_ALL",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All NID matched miss requests that were inserted into the TOR.",
- "UMask": "0x4A",
+ "UMask": "0x4a",
"Unit": "CBO"
},
{
"BriefDescription": "TOR Inserts; NID and Opcode Matched Miss",
- "Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.NID_MISS_OPCODE",
"PerPkg": "1",
@@ -1125,7 +1043,6 @@
},
{
"BriefDescription": "TOR Inserts; NID and Opcode Matched",
- "Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.NID_OPCODE",
"PerPkg": "1",
@@ -1135,7 +1052,6 @@
},
{
"BriefDescription": "TOR Inserts; NID Matched Writebacks",
- "Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.NID_WB",
"PerPkg": "1",
@@ -1145,7 +1061,6 @@
},
{
"BriefDescription": "TOR Inserts; Opcode Match",
- "Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.OPCODE",
"PerPkg": "1",
@@ -1155,7 +1070,6 @@
},
{
"BriefDescription": "TOR Inserts; Remote Memory",
- "Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.REMOTE",
"PerPkg": "1",
@@ -1165,7 +1079,6 @@
},
{
"BriefDescription": "TOR Inserts; Remote Memory - Opcode Matched",
- "Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.REMOTE_OPCODE",
"PerPkg": "1",
@@ -1175,7 +1088,6 @@
},
{
"BriefDescription": "TOR Inserts; Writebacks",
- "Counter": "0,1",
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.WB",
"PerPkg": "1",
@@ -1225,7 +1137,7 @@
"EventName": "UNC_C_TOR_OCCUPANCY.MISS_ALL",
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding miss requests in the TOR. 'Miss' means the allocation requires an RTID. This generally means that the request was sent to memory or MMIO.",
- "UMask": "0xA",
+ "UMask": "0xa",
"Unit": "CBO"
},
{
@@ -1234,7 +1146,7 @@
"EventName": "UNC_C_TOR_OCCUPANCY.MISS_LOCAL",
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182)",
- "UMask": "0x2A",
+ "UMask": "0x2a",
"Unit": "CBO"
},
{
@@ -1261,7 +1173,7 @@
"EventName": "UNC_C_TOR_OCCUPANCY.MISS_REMOTE",
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182)",
- "UMask": "0x8A",
+ "UMask": "0x8a",
"Unit": "CBO"
},
{
@@ -1297,7 +1209,7 @@
"EventName": "UNC_C_TOR_OCCUPANCY.NID_MISS_ALL",
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding Miss requests in the TOR that match a NID.",
- "UMask": "0x4A",
+ "UMask": "0x4a",
"Unit": "CBO"
},
{
@@ -1365,7 +1277,6 @@
},
{
"BriefDescription": "Onto AD Ring",
- "Counter": "0,1",
"EventCode": "0x4",
"EventName": "UNC_C_TxR_ADS_USED.AD",
"PerPkg": "1",
@@ -1374,7 +1285,6 @@
},
{
"BriefDescription": "Onto AK Ring",
- "Counter": "0,1",
"EventCode": "0x4",
"EventName": "UNC_C_TxR_ADS_USED.AK",
"PerPkg": "1",
@@ -1383,7 +1293,6 @@
},
{
"BriefDescription": "Onto BL Ring",
- "Counter": "0,1",
"EventCode": "0x4",
"EventName": "UNC_C_TxR_ADS_USED.BL",
"PerPkg": "1",
@@ -1392,7 +1301,6 @@
},
{
"BriefDescription": "Egress Allocations; AD - Cachebo",
- "Counter": "0,1",
"EventCode": "0x2",
"EventName": "UNC_C_TxR_INSERTS.AD_CACHE",
"PerPkg": "1",
@@ -1402,7 +1310,6 @@
},
{
"BriefDescription": "Egress Allocations; AD - Corebo",
- "Counter": "0,1",
"EventCode": "0x2",
"EventName": "UNC_C_TxR_INSERTS.AD_CORE",
"PerPkg": "1",
@@ -1412,7 +1319,6 @@
},
{
"BriefDescription": "Egress Allocations; AK - Cachebo",
- "Counter": "0,1",
"EventCode": "0x2",
"EventName": "UNC_C_TxR_INSERTS.AK_CACHE",
"PerPkg": "1",
@@ -1422,7 +1328,6 @@
},
{
"BriefDescription": "Egress Allocations; AK - Corebo",
- "Counter": "0,1",
"EventCode": "0x2",
"EventName": "UNC_C_TxR_INSERTS.AK_CORE",
"PerPkg": "1",
@@ -1432,7 +1337,6 @@
},
{
"BriefDescription": "Egress Allocations; BL - Cacheno",
- "Counter": "0,1",
"EventCode": "0x2",
"EventName": "UNC_C_TxR_INSERTS.BL_CACHE",
"PerPkg": "1",
@@ -1442,7 +1346,6 @@
},
{
"BriefDescription": "Egress Allocations; BL - Corebo",
- "Counter": "0,1",
"EventCode": "0x2",
"EventName": "UNC_C_TxR_INSERTS.BL_CORE",
"PerPkg": "1",
@@ -1452,7 +1355,6 @@
},
{
"BriefDescription": "Egress Allocations; IV - Cachebo",
- "Counter": "0,1",
"EventCode": "0x2",
"EventName": "UNC_C_TxR_INSERTS.IV_CACHE",
"PerPkg": "1",
@@ -1462,7 +1364,6 @@
},
{
"BriefDescription": "Injection Starvation; Onto AD Ring (to core)",
- "Counter": "0,1",
"EventCode": "0x3",
"EventName": "UNC_C_TxR_STARVED.AD_CORE",
"PerPkg": "1",
@@ -1472,7 +1373,6 @@
},
{
"BriefDescription": "Injection Starvation; Onto AK Ring",
- "Counter": "0,1",
"EventCode": "0x3",
"EventName": "UNC_C_TxR_STARVED.AK_BOTH",
"PerPkg": "1",
@@ -1482,7 +1382,6 @@
},
{
"BriefDescription": "Injection Starvation; Onto IV Ring",
- "Counter": "0,1",
"EventCode": "0x3",
"EventName": "UNC_C_TxR_STARVED.IV",
"PerPkg": "1",
@@ -1492,7 +1391,6 @@
},
{
"BriefDescription": "BT Bypass",
- "Counter": "0,1,2,3",
"EventCode": "0x52",
"EventName": "UNC_H_BT_BYPASS",
"PerPkg": "1",
@@ -1501,7 +1399,6 @@
},
{
"BriefDescription": "BT Cycles Not Empty",
- "Counter": "0,1,2,3",
"EventCode": "0x42",
"EventName": "UNC_H_BT_CYCLES_NE",
"PerPkg": "1",
@@ -1510,7 +1407,6 @@
},
{
"BriefDescription": "BT Cycles Not Empty: Local",
- "Counter": "0,1,2,3",
"EventCode": "0x42",
"EventName": "UNC_H_BT_CYCLES_NE.LOCAL",
"PerPkg": "1",
@@ -1520,7 +1416,6 @@
},
{
"BriefDescription": "BT Cycles Not Empty: Remote",
- "Counter": "0,1,2,3",
"EventCode": "0x42",
"EventName": "UNC_H_BT_CYCLES_NE.REMOTE",
"PerPkg": "1",
@@ -1530,7 +1425,6 @@
},
{
"BriefDescription": "BT Occupancy; Local",
- "Counter": "0,1,2,3",
"EventCode": "0x43",
"EventName": "UNC_H_BT_OCCUPANCY.LOCAL",
"PerPkg": "1",
@@ -1540,7 +1434,6 @@
},
{
"BriefDescription": "BT Occupancy; Reads Local",
- "Counter": "0,1,2,3",
"EventCode": "0x43",
"EventName": "UNC_H_BT_OCCUPANCY.READS_LOCAL",
"PerPkg": "1",
@@ -1550,7 +1443,6 @@
},
{
"BriefDescription": "BT Occupancy; Reads Remote",
- "Counter": "0,1,2,3",
"EventCode": "0x43",
"EventName": "UNC_H_BT_OCCUPANCY.READS_REMOTE",
"PerPkg": "1",
@@ -1560,7 +1452,6 @@
},
{
"BriefDescription": "BT Occupancy; Remote",
- "Counter": "0,1,2,3",
"EventCode": "0x43",
"EventName": "UNC_H_BT_OCCUPANCY.REMOTE",
"PerPkg": "1",
@@ -1570,7 +1461,6 @@
},
{
"BriefDescription": "BT Occupancy; Writes Local",
- "Counter": "0,1,2,3",
"EventCode": "0x43",
"EventName": "UNC_H_BT_OCCUPANCY.WRITES_LOCAL",
"PerPkg": "1",
@@ -1580,7 +1470,6 @@
},
{
"BriefDescription": "BT Occupancy; Writes Remote",
- "Counter": "0,1,2,3",
"EventCode": "0x43",
"EventName": "UNC_H_BT_OCCUPANCY.WRITES_REMOTE",
"PerPkg": "1",
@@ -1590,7 +1479,6 @@
},
{
"BriefDescription": "BT to HT Not Issued; Incoming Data Hazard",
- "Counter": "0,1,2,3",
"EventCode": "0x51",
"EventName": "UNC_H_BT_TO_HT_NOT_ISSUED.INCOMING_BL_HAZARD",
"PerPkg": "1",
@@ -1600,7 +1488,6 @@
},
{
"BriefDescription": "BT to HT Not Issued; Incoming Snoop Hazard",
- "Counter": "0,1,2,3",
"EventCode": "0x51",
"EventName": "UNC_H_BT_TO_HT_NOT_ISSUED.INCOMING_SNP_HAZARD",
"PerPkg": "1",
@@ -1610,7 +1497,6 @@
},
{
"BriefDescription": "BT to HT Not Issued; Incoming Data Hazard",
- "Counter": "0,1,2,3",
"EventCode": "0x51",
"EventName": "UNC_H_BT_TO_HT_NOT_ISSUED.RSPACKCFLT_HAZARD",
"PerPkg": "1",
@@ -1620,7 +1506,6 @@
},
{
"BriefDescription": "BT to HT Not Issued; Incoming Data Hazard",
- "Counter": "0,1,2,3",
"EventCode": "0x51",
"EventName": "UNC_H_BT_TO_HT_NOT_ISSUED.WBMDATA_HAZARD",
"PerPkg": "1",
@@ -1630,7 +1515,6 @@
},
{
"BriefDescription": "HA to iMC Bypass; Not Taken",
- "Counter": "0,1,2,3",
"EventCode": "0x14",
"EventName": "UNC_H_BYPASS_IMC.NOT_TAKEN",
"PerPkg": "1",
@@ -1640,7 +1524,6 @@
},
{
"BriefDescription": "HA to iMC Bypass; Taken",
- "Counter": "0,1,2,3",
"EventCode": "0x14",
"EventName": "UNC_H_BYPASS_IMC.TAKEN",
"PerPkg": "1",
@@ -1650,7 +1533,6 @@
},
{
"BriefDescription": "uclks",
- "Counter": "0,1,2,3",
"EventName": "UNC_H_CLOCKTICKS",
"PerPkg": "1",
"PublicDescription": "Counts the number of uclks in the HA. This will be slightly different than the count in the Ubox because of enable/freeze delays. The HA is on the other side of the die from the fixed Ubox uclk counter, so the drift could be somewhat larger than in units that are closer like the QPI Agent.",
@@ -1658,7 +1540,6 @@
},
{
"BriefDescription": "Conflict Checks; Acknowledge Conflicts",
- "Counter": "0,1,2,3",
"EventCode": "0xb",
"EventName": "UNC_H_CONFLICT_CYCLES.ACKCNFLTS",
"PerPkg": "1",
@@ -1668,7 +1549,6 @@
},
{
"BriefDescription": "Conflict Checks; Cmp Fwds",
- "Counter": "0,1,2,3",
"EventCode": "0xb",
"EventName": "UNC_H_CONFLICT_CYCLES.CMP_FWDS",
"PerPkg": "1",
@@ -1678,7 +1558,6 @@
},
{
"BriefDescription": "Conflict Checks; Conflict Detected",
- "Counter": "0,1,2,3",
"EventCode": "0xb",
"EventName": "UNC_H_CONFLICT_CYCLES.CONFLICT",
"PerPkg": "1",
@@ -1688,7 +1567,6 @@
},
{
"BriefDescription": "Conflict Checks; Last in conflict chain",
- "Counter": "0,1,2,3",
"EventCode": "0xb",
"EventName": "UNC_H_CONFLICT_CYCLES.LAST",
"PerPkg": "1",
@@ -1698,7 +1576,6 @@
},
{
"BriefDescription": "Direct2Core Messages Sent",
- "Counter": "0,1,2,3",
"EventCode": "0x11",
"EventName": "UNC_H_DIRECT2CORE_COUNT",
"PerPkg": "1",
@@ -1707,7 +1584,6 @@
},
{
"BriefDescription": "Cycles when Direct2Core was Disabled",
- "Counter": "0,1,2,3",
"EventCode": "0x12",
"EventName": "UNC_H_DIRECT2CORE_CYCLES_DISABLED",
"PerPkg": "1",
@@ -1716,7 +1592,6 @@
},
{
"BriefDescription": "Number of Reads that had Direct2Core Overridden",
- "Counter": "0,1,2,3",
"EventCode": "0x13",
"EventName": "UNC_H_DIRECT2CORE_TXN_OVERRIDE",
"PerPkg": "1",
@@ -1725,7 +1600,6 @@
},
{
"BriefDescription": "Directory Lat Opt Return",
- "Counter": "0,1,2,3",
"EventCode": "0x41",
"EventName": "UNC_H_DIRECTORY_LAT_OPT",
"PerPkg": "1",
@@ -1734,7 +1608,6 @@
},
{
"BriefDescription": "Directory Lookups: Any state",
- "Counter": "0,1,2,3",
"EventCode": "0xc",
"EventName": "UNC_H_DIRECTORY_LOOKUP.ANY",
"PerPkg": "1",
@@ -1744,7 +1617,6 @@
},
{
"BriefDescription": "Directory Lookups; Snoop Not Needed",
- "Counter": "0,1,2,3",
"EventCode": "0xc",
"EventName": "UNC_H_DIRECTORY_LOOKUP.NO_SNP",
"PerPkg": "1",
@@ -1754,7 +1626,6 @@
},
{
"BriefDescription": "Directory Lookups: Snoop A",
- "Counter": "0,1,2,3",
"EventCode": "0xc",
"EventName": "UNC_H_DIRECTORY_LOOKUP.SNOOP_A",
"PerPkg": "1",
@@ -1764,7 +1635,6 @@
},
{
"BriefDescription": "Directory Lookups: Snoop S",
- "Counter": "0,1,2,3",
"EventCode": "0xc",
"EventName": "UNC_H_DIRECTORY_LOOKUP.SNOOP_S",
"PerPkg": "1",
@@ -1774,7 +1644,6 @@
},
{
"BriefDescription": "Directory Lookups; Snoop Needed",
- "Counter": "0,1,2,3",
"EventCode": "0xc",
"EventName": "UNC_H_DIRECTORY_LOOKUP.SNP",
"PerPkg": "1",
@@ -1784,7 +1653,6 @@
},
{
"BriefDescription": "Directory Lookups: A State",
- "Counter": "0,1,2,3",
"EventCode": "0xc",
"EventName": "UNC_H_DIRECTORY_LOOKUP.STATE_A",
"PerPkg": "1",
@@ -1794,7 +1662,6 @@
},
{
"BriefDescription": "Directory Lookups: I State",
- "Counter": "0,1,2,3",
"EventCode": "0xc",
"EventName": "UNC_H_DIRECTORY_LOOKUP.STATE_I",
"PerPkg": "1",
@@ -1804,7 +1671,6 @@
},
{
"BriefDescription": "Directory Lookups: S State",
- "Counter": "0,1,2,3",
"EventCode": "0xc",
"EventName": "UNC_H_DIRECTORY_LOOKUP.STATE_S",
"PerPkg": "1",
@@ -1814,7 +1680,6 @@
},
{
"BriefDescription": "Directory Updates: A2I",
- "Counter": "0,1,2,3",
"EventCode": "0xd",
"EventName": "UNC_H_DIRECTORY_UPDATE.A2I",
"PerPkg": "1",
@@ -1824,7 +1689,6 @@
},
{
"BriefDescription": "Directory Updates: A2S",
- "Counter": "0,1,2,3",
"EventCode": "0xd",
"EventName": "UNC_H_DIRECTORY_UPDATE.A2S",
"PerPkg": "1",
@@ -1834,7 +1698,6 @@
},
{
"BriefDescription": "Directory Updates; Any Directory Update",
- "Counter": "0,1,2,3",
"EventCode": "0xd",
"EventName": "UNC_H_DIRECTORY_UPDATE.ANY",
"PerPkg": "1",
@@ -1844,7 +1707,6 @@
},
{
"BriefDescription": "Directory Updates; Directory Clear",
- "Counter": "0,1,2,3",
"EventCode": "0xD",
"EventName": "UNC_H_DIRECTORY_UPDATE.CLEAR",
"PerPkg": "1",
@@ -1854,7 +1716,6 @@
},
{
"BriefDescription": "Directory Updates: I2A",
- "Counter": "0,1,2,3",
"EventCode": "0xd",
"EventName": "UNC_H_DIRECTORY_UPDATE.I2A",
"PerPkg": "1",
@@ -1864,7 +1725,6 @@
},
{
"BriefDescription": "Directory Updates: I2S",
- "Counter": "0,1,2,3",
"EventCode": "0xd",
"EventName": "UNC_H_DIRECTORY_UPDATE.I2S",
"PerPkg": "1",
@@ -1874,7 +1734,6 @@
},
{
"BriefDescription": "Directory Updates: S2A",
- "Counter": "0,1,2,3",
"EventCode": "0xd",
"EventName": "UNC_H_DIRECTORY_UPDATE.S2A",
"PerPkg": "1",
@@ -1884,7 +1743,6 @@
},
{
"BriefDescription": "Directory Updates: S2I",
- "Counter": "0,1,2,3",
"EventCode": "0xd",
"EventName": "UNC_H_DIRECTORY_UPDATE.S2I",
"PerPkg": "1",
@@ -1894,7 +1752,6 @@
},
{
"BriefDescription": "Directory Updates; Directory Set",
- "Counter": "0,1,2,3",
"EventCode": "0xD",
"EventName": "UNC_H_DIRECTORY_UPDATE.SET",
"PerPkg": "1",
@@ -1904,7 +1761,6 @@
},
{
"BriefDescription": "AD QPI Link 2 Credit Accumulator",
- "Counter": "0,1,2,3",
"EventCode": "0x59",
"EventName": "UNC_H_IGR_AD_QPI2_ACCUMULATOR",
"PerPkg": "1",
@@ -1913,7 +1769,6 @@
},
{
"BriefDescription": "BL QPI Link 2 Credit Accumulator",
- "Counter": "0,1,2,3",
"EventCode": "0x5a",
"EventName": "UNC_H_IGR_BL_QPI2_ACCUMULATOR",
"PerPkg": "1",
@@ -1922,7 +1777,6 @@
},
{
"BriefDescription": "AD QPI Link 2 Credit Accumulator",
- "Counter": "0,1,2,3",
"EventCode": "0x59",
"EventName": "UNC_H_IGR_CREDITS_AD_QPI2",
"PerPkg": "1",
@@ -1931,7 +1785,6 @@
},
{
"BriefDescription": "BL QPI Link 2 Credit Accumulator",
- "Counter": "0,1,2,3",
"EventCode": "0x5A",
"EventName": "UNC_H_IGR_CREDITS_BL_QPI2",
"PerPkg": "1",
@@ -1940,7 +1793,6 @@
},
{
"BriefDescription": "Cycles without QPI Ingress Credits; AD to QPI Link 0",
- "Counter": "0,1,2,3",
"EventCode": "0x22",
"EventName": "UNC_H_IGR_NO_CREDIT_CYCLES.AD_QPI0",
"PerPkg": "1",
@@ -1950,7 +1802,6 @@
},
{
"BriefDescription": "Cycles without QPI Ingress Credits; AD to QPI Link 1",
- "Counter": "0,1,2,3",
"EventCode": "0x22",
"EventName": "UNC_H_IGR_NO_CREDIT_CYCLES.AD_QPI1",
"PerPkg": "1",
@@ -1960,7 +1811,6 @@
},
{
"BriefDescription": "Cycles without QPI Ingress Credits; BL to QPI Link 0",
- "Counter": "0,1,2,3",
"EventCode": "0x22",
"EventName": "UNC_H_IGR_NO_CREDIT_CYCLES.BL_QPI0",
"PerPkg": "1",
@@ -1970,7 +1820,6 @@
},
{
"BriefDescription": "Cycles without QPI Ingress Credits; BL to QPI Link 1",
- "Counter": "0,1,2,3",
"EventCode": "0x22",
"EventName": "UNC_H_IGR_NO_CREDIT_CYCLES.BL_QPI1",
"PerPkg": "1",
@@ -1980,7 +1829,6 @@
},
{
"BriefDescription": "HA to iMC Normal Priority Reads Issued; Normal Priority",
- "Counter": "0,1,2,3",
"EventCode": "0x17",
"EventName": "UNC_H_IMC_READS.NORMAL",
"PerPkg": "1",
@@ -1990,7 +1838,6 @@
},
{
"BriefDescription": "Retry Events",
- "Counter": "0,1,2,3",
"EventCode": "0x1e",
"EventName": "UNC_H_IMC_RETRY",
"PerPkg": "1",
@@ -1998,17 +1845,15 @@
},
{
"BriefDescription": "HA to iMC Full Line Writes Issued; All Writes",
- "Counter": "0,1,2,3",
"EventCode": "0x1a",
"EventName": "UNC_H_IMC_WRITES.ALL",
"PerPkg": "1",
"PublicDescription": "Counts the total number of full line writes issued from the HA into the memory controller. This counts for all four channels. It can be filtered by full/partial and ISOCH/non-ISOCH.",
- "UMask": "0xF",
+ "UMask": "0xf",
"Unit": "HA"
},
{
"BriefDescription": "HA to iMC Full Line Writes Issued; Full Line Non-ISOCH",
- "Counter": "0,1,2,3",
"EventCode": "0x1a",
"EventName": "UNC_H_IMC_WRITES.FULL",
"PerPkg": "1",
@@ -2018,7 +1863,6 @@
},
{
"BriefDescription": "HA to iMC Full Line Writes Issued; ISOCH Full Line",
- "Counter": "0,1,2,3",
"EventCode": "0x1a",
"EventName": "UNC_H_IMC_WRITES.FULL_ISOCH",
"PerPkg": "1",
@@ -2028,7 +1872,6 @@
},
{
"BriefDescription": "HA to iMC Full Line Writes Issued; Partial Non-ISOCH",
- "Counter": "0,1,2,3",
"EventCode": "0x1a",
"EventName": "UNC_H_IMC_WRITES.PARTIAL",
"PerPkg": "1",
@@ -2038,7 +1881,6 @@
},
{
"BriefDescription": "HA to iMC Full Line Writes Issued; ISOCH Partial",
- "Counter": "0,1,2,3",
"EventCode": "0x1a",
"EventName": "UNC_H_IMC_WRITES.PARTIAL_ISOCH",
"PerPkg": "1",
@@ -2048,7 +1890,6 @@
},
{
"BriefDescription": "IODC Conflicts; Any Conflict",
- "Counter": "0,1,2,3",
"EventCode": "0x57",
"EventName": "UNC_H_IODC_CONFLICTS.ANY",
"PerPkg": "1",
@@ -2057,7 +1898,6 @@
},
{
"BriefDescription": "IODC Conflicts; Last Conflict",
- "Counter": "0,1,2,3",
"EventCode": "0x57",
"EventName": "UNC_H_IODC_CONFLICTS.LAST",
"PerPkg": "1",
@@ -2066,7 +1906,6 @@
},
{
"BriefDescription": "IODC Conflicts: Remote InvItoE - Same RTID",
- "Counter": "0,1,2,3",
"EventCode": "0x57",
"EventName": "UNC_H_IODC_CONFLICTS.REMOTE_INVI2E_SAME_RTID",
"PerPkg": "1",
@@ -2075,7 +1914,6 @@
},
{
"BriefDescription": "IODC Conflicts: Remote (Other) - Same Addr",
- "Counter": "0,1,2,3",
"EventCode": "0x57",
"EventName": "UNC_H_IODC_CONFLICTS.REMOTE_OTHER_SAME_ADDR",
"PerPkg": "1",
@@ -2084,7 +1922,6 @@
},
{
"BriefDescription": "IODC Inserts",
- "Counter": "0,1,2,3",
"EventCode": "0x56",
"EventName": "UNC_H_IODC_INSERTS",
"PerPkg": "1",
@@ -2093,7 +1930,6 @@
},
{
"BriefDescription": "Num IODC 0 Length Writes",
- "Counter": "0,1,2,3",
"EventCode": "0x58",
"EventName": "UNC_H_IODC_OLEN_WBMTOI",
"PerPkg": "1",
@@ -2102,7 +1938,6 @@
},
{
"BriefDescription": "OSB Snoop Broadcast; Local InvItoE",
- "Counter": "0,1,2,3",
"EventCode": "0x53",
"EventName": "UNC_H_OSB.INVITOE_LOCAL",
"PerPkg": "1",
@@ -2112,7 +1947,6 @@
},
{
"BriefDescription": "OSB Snoop Broadcast; Local Reads",
- "Counter": "0,1,2,3",
"EventCode": "0x53",
"EventName": "UNC_H_OSB.READS_LOCAL",
"PerPkg": "1",
@@ -2122,7 +1956,6 @@
},
{
"BriefDescription": "OSB Snoop Broadcast; Remote",
- "Counter": "0,1,2,3",
"EventCode": "0x53",
"EventName": "UNC_H_OSB.REMOTE",
"PerPkg": "1",
@@ -2132,7 +1965,6 @@
},
{
"BriefDescription": "OSB Early Data Return; All",
- "Counter": "0,1,2,3",
"EventCode": "0x54",
"EventName": "UNC_H_OSB_EDR.ALL",
"PerPkg": "1",
@@ -2142,7 +1974,6 @@
},
{
"BriefDescription": "OSB Early Data Return; Reads to Local I",
- "Counter": "0,1,2,3",
"EventCode": "0x54",
"EventName": "UNC_H_OSB_EDR.READS_LOCAL_I",
"PerPkg": "1",
@@ -2152,7 +1983,6 @@
},
{
"BriefDescription": "OSB Early Data Return; Reads to Local S",
- "Counter": "0,1,2,3",
"EventCode": "0x54",
"EventName": "UNC_H_OSB_EDR.READS_LOCAL_S",
"PerPkg": "1",
@@ -2162,7 +1992,6 @@
},
{
"BriefDescription": "OSB Early Data Return; Reads to Remote I",
- "Counter": "0,1,2,3",
"EventCode": "0x54",
"EventName": "UNC_H_OSB_EDR.READS_REMOTE_I",
"PerPkg": "1",
@@ -2172,7 +2001,6 @@
},
{
"BriefDescription": "OSB Early Data Return; Reads to Remote S",
- "Counter": "0,1,2,3",
"EventCode": "0x54",
"EventName": "UNC_H_OSB_EDR.READS_REMOTE_S",
"PerPkg": "1",
@@ -2182,7 +2010,6 @@
},
{
"BriefDescription": "Read and Write Requests; Local InvItoEs",
- "Counter": "0,1,2,3",
"EventCode": "0x1",
"EventName": "UNC_H_REQUESTS.INVITOE_LOCAL",
"PerPkg": "1",
@@ -2192,7 +2019,6 @@
},
{
"BriefDescription": "Read and Write Requests; Remote InvItoEs",
- "Counter": "0,1,2,3",
"EventCode": "0x1",
"EventName": "UNC_H_REQUESTS.INVITOE_REMOTE",
"PerPkg": "1",
@@ -2202,7 +2028,6 @@
},
{
"BriefDescription": "Read and Write Requests; Reads",
- "Counter": "0,1,2,3",
"EventCode": "0x1",
"EventName": "UNC_H_REQUESTS.READS",
"PerPkg": "1",
@@ -2212,7 +2037,6 @@
},
{
"BriefDescription": "Read and Write Requests; Local Reads",
- "Counter": "0,1,2,3",
"EventCode": "0x1",
"EventName": "UNC_H_REQUESTS.READS_LOCAL",
"PerPkg": "1",
@@ -2222,7 +2046,6 @@
},
{
"BriefDescription": "Read and Write Requests; Remote Reads",
- "Counter": "0,1,2,3",
"EventCode": "0x1",
"EventName": "UNC_H_REQUESTS.READS_REMOTE",
"PerPkg": "1",
@@ -2232,17 +2055,15 @@
},
{
"BriefDescription": "Read and Write Requests; Writes",
- "Counter": "0,1,2,3",
"EventCode": "0x1",
"EventName": "UNC_H_REQUESTS.WRITES",
"PerPkg": "1",
"PublicDescription": "Counts the total number of read requests made into the Home Agent. Reads include all read opcodes (including RFO). Writes include all writes (streaming, evictions, HitM, etc).; Incoming write requests.",
- "UMask": "0xC",
+ "UMask": "0xc",
"Unit": "HA"
},
{
"BriefDescription": "Read and Write Requests; Local Writes",
- "Counter": "0,1,2,3",
"EventCode": "0x1",
"EventName": "UNC_H_REQUESTS.WRITES_LOCAL",
"PerPkg": "1",
@@ -2252,7 +2073,6 @@
},
{
"BriefDescription": "Read and Write Requests; Remote Writes",
- "Counter": "0,1,2,3",
"EventCode": "0x1",
"EventName": "UNC_H_REQUESTS.WRITES_REMOTE",
"PerPkg": "1",
@@ -2262,17 +2082,15 @@
},
{
"BriefDescription": "HA AD Ring in Use; Counterclockwise",
- "Counter": "0,1,2,3",
"EventCode": "0x3E",
"EventName": "UNC_H_RING_AD_USED.CCW",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the AD ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop.",
- "UMask": "0xCC",
+ "UMask": "0xcc",
"Unit": "HA"
},
{
"BriefDescription": "HA AD Ring in Use; Counterclockwise and Even on VRing 0",
- "Counter": "0,1,2,3",
"EventCode": "0x3e",
"EventName": "UNC_H_RING_AD_USED.CCW_VR0_EVEN",
"PerPkg": "1",
@@ -2282,7 +2100,6 @@
},
{
"BriefDescription": "HA AD Ring in Use; Counterclockwise and Odd on VRing 0",
- "Counter": "0,1,2,3",
"EventCode": "0x3e",
"EventName": "UNC_H_RING_AD_USED.CCW_VR0_ODD",
"PerPkg": "1",
@@ -2292,7 +2109,6 @@
},
{
"BriefDescription": "HA AD Ring in Use; Counterclockwise and Even on VRing 1",
- "Counter": "0,1,2,3",
"EventCode": "0x3e",
"EventName": "UNC_H_RING_AD_USED.CCW_VR1_EVEN",
"PerPkg": "1",
@@ -2302,7 +2118,6 @@
},
{
"BriefDescription": "HA AD Ring in Use; Counterclockwise and Odd on VRing 1",
- "Counter": "0,1,2,3",
"EventCode": "0x3e",
"EventName": "UNC_H_RING_AD_USED.CCW_VR1_ODD",
"PerPkg": "1",
@@ -2312,7 +2127,6 @@
},
{
"BriefDescription": "HA AD Ring in Use; Clockwise",
- "Counter": "0,1,2,3",
"EventCode": "0x3E",
"EventName": "UNC_H_RING_AD_USED.CW",
"PerPkg": "1",
@@ -2322,7 +2136,6 @@
},
{
"BriefDescription": "HA AD Ring in Use; Clockwise and Even on VRing 0",
- "Counter": "0,1,2,3",
"EventCode": "0x3e",
"EventName": "UNC_H_RING_AD_USED.CW_VR0_EVEN",
"PerPkg": "1",
@@ -2332,7 +2145,6 @@
},
{
"BriefDescription": "HA AD Ring in Use; Clockwise and Odd on VRing 0",
- "Counter": "0,1,2,3",
"EventCode": "0x3e",
"EventName": "UNC_H_RING_AD_USED.CW_VR0_ODD",
"PerPkg": "1",
@@ -2342,7 +2154,6 @@
},
{
"BriefDescription": "HA AD Ring in Use; Clockwise and Even on VRing 1",
- "Counter": "0,1,2,3",
"EventCode": "0x3e",
"EventName": "UNC_H_RING_AD_USED.CW_VR1_EVEN",
"PerPkg": "1",
@@ -2352,7 +2163,6 @@
},
{
"BriefDescription": "HA AD Ring in Use; Clockwise and Odd on VRing 1",
- "Counter": "0,1,2,3",
"EventCode": "0x3e",
"EventName": "UNC_H_RING_AD_USED.CW_VR1_ODD",
"PerPkg": "1",
@@ -2362,17 +2172,15 @@
},
{
"BriefDescription": "HA AK Ring in Use; Counterclockwise",
- "Counter": "0,1,2,3",
"EventCode": "0x3F",
"EventName": "UNC_H_RING_AK_USED.CCW",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the AK ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop.",
- "UMask": "0xCC",
+ "UMask": "0xcc",
"Unit": "HA"
},
{
"BriefDescription": "HA AK Ring in Use; Counterclockwise and Even on VRing 0",
- "Counter": "0,1,2,3",
"EventCode": "0x3f",
"EventName": "UNC_H_RING_AK_USED.CCW_VR0_EVEN",
"PerPkg": "1",
@@ -2382,7 +2190,6 @@
},
{
"BriefDescription": "HA AK Ring in Use; Counterclockwise and Odd on VRing 0",
- "Counter": "0,1,2,3",
"EventCode": "0x3f",
"EventName": "UNC_H_RING_AK_USED.CCW_VR0_ODD",
"PerPkg": "1",
@@ -2392,7 +2199,6 @@
},
{
"BriefDescription": "HA AK Ring in Use; Counterclockwise and Even on VRing 1",
- "Counter": "0,1,2,3",
"EventCode": "0x3f",
"EventName": "UNC_H_RING_AK_USED.CCW_VR1_EVEN",
"PerPkg": "1",
@@ -2402,7 +2208,6 @@
},
{
"BriefDescription": "HA AK Ring in Use; Counterclockwise and Odd on VRing 1",
- "Counter": "0,1,2,3",
"EventCode": "0x3f",
"EventName": "UNC_H_RING_AK_USED.CCW_VR1_ODD",
"PerPkg": "1",
@@ -2412,7 +2217,6 @@
},
{
"BriefDescription": "HA AK Ring in Use; Clockwise",
- "Counter": "0,1,2,3",
"EventCode": "0x3F",
"EventName": "UNC_H_RING_AK_USED.CW",
"PerPkg": "1",
@@ -2422,7 +2226,6 @@
},
{
"BriefDescription": "HA AK Ring in Use; Clockwise and Even on VRing 0",
- "Counter": "0,1,2,3",
"EventCode": "0x3f",
"EventName": "UNC_H_RING_AK_USED.CW_VR0_EVEN",
"PerPkg": "1",
@@ -2432,7 +2235,6 @@
},
{
"BriefDescription": "HA AK Ring in Use; Clockwise and Odd on VRing 0",
- "Counter": "0,1,2,3",
"EventCode": "0x3f",
"EventName": "UNC_H_RING_AK_USED.CW_VR0_ODD",
"PerPkg": "1",
@@ -2442,7 +2244,6 @@
},
{
"BriefDescription": "HA AK Ring in Use; Clockwise and Even on VRing 1",
- "Counter": "0,1,2,3",
"EventCode": "0x3f",
"EventName": "UNC_H_RING_AK_USED.CW_VR1_EVEN",
"PerPkg": "1",
@@ -2452,7 +2253,6 @@
},
{
"BriefDescription": "HA AK Ring in Use; Clockwise and Odd on VRing 1",
- "Counter": "0,1,2,3",
"EventCode": "0x3f",
"EventName": "UNC_H_RING_AK_USED.CW_VR1_ODD",
"PerPkg": "1",
@@ -2462,17 +2262,15 @@
},
{
"BriefDescription": "HA BL Ring in Use; Counterclockwise",
- "Counter": "0,1,2,3",
"EventCode": "0x40",
"EventName": "UNC_H_RING_BL_USED.CCW",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the BL ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop.",
- "UMask": "0xCC",
+ "UMask": "0xcc",
"Unit": "HA"
},
{
"BriefDescription": "HA BL Ring in Use; Counterclockwise and Even on VRing 0",
- "Counter": "0,1,2,3",
"EventCode": "0x40",
"EventName": "UNC_H_RING_BL_USED.CCW_VR0_EVEN",
"PerPkg": "1",
@@ -2482,7 +2280,6 @@
},
{
"BriefDescription": "HA BL Ring in Use; Counterclockwise and Odd on VRing 0",
- "Counter": "0,1,2,3",
"EventCode": "0x40",
"EventName": "UNC_H_RING_BL_USED.CCW_VR0_ODD",
"PerPkg": "1",
@@ -2492,7 +2289,6 @@
},
{
"BriefDescription": "HA BL Ring in Use; Counterclockwise and Even on VRing 1",
- "Counter": "0,1,2,3",
"EventCode": "0x40",
"EventName": "UNC_H_RING_BL_USED.CCW_VR1_EVEN",
"PerPkg": "1",
@@ -2502,7 +2298,6 @@
},
{
"BriefDescription": "HA BL Ring in Use; Counterclockwise and Odd on VRing 1",
- "Counter": "0,1,2,3",
"EventCode": "0x40",
"EventName": "UNC_H_RING_BL_USED.CCW_VR1_ODD",
"PerPkg": "1",
@@ -2512,7 +2307,6 @@
},
{
"BriefDescription": "HA BL Ring in Use; Clockwise",
- "Counter": "0,1,2,3",
"EventCode": "0x40",
"EventName": "UNC_H_RING_BL_USED.CW",
"PerPkg": "1",
@@ -2522,7 +2316,6 @@
},
{
"BriefDescription": "HA BL Ring in Use; Clockwise and Even on VRing 0",
- "Counter": "0,1,2,3",
"EventCode": "0x40",
"EventName": "UNC_H_RING_BL_USED.CW_VR0_EVEN",
"PerPkg": "1",
@@ -2532,7 +2325,6 @@
},
{
"BriefDescription": "HA BL Ring in Use; Clockwise and Odd on VRing 0",
- "Counter": "0,1,2,3",
"EventCode": "0x40",
"EventName": "UNC_H_RING_BL_USED.CW_VR0_ODD",
"PerPkg": "1",
@@ -2542,7 +2334,6 @@
},
{
"BriefDescription": "HA BL Ring in Use; Clockwise and Even on VRing 1",
- "Counter": "0,1,2,3",
"EventCode": "0x40",
"EventName": "UNC_H_RING_BL_USED.CW_VR1_EVEN",
"PerPkg": "1",
@@ -2552,7 +2343,6 @@
},
{
"BriefDescription": "HA BL Ring in Use; Clockwise and Odd on VRing 1",
- "Counter": "0,1,2,3",
"EventCode": "0x40",
"EventName": "UNC_H_RING_BL_USED.CW_VR1_ODD",
"PerPkg": "1",
@@ -2562,7 +2352,6 @@
},
{
"BriefDescription": "iMC RPQ Credits Empty - Regular; Channel 0",
- "Counter": "0,1,2,3",
"EventCode": "0x15",
"EventName": "UNC_H_RPQ_CYCLES_NO_REG_CREDITS.CHN0",
"PerPkg": "1",
@@ -2572,7 +2361,6 @@
},
{
"BriefDescription": "iMC RPQ Credits Empty - Regular; Channel 1",
- "Counter": "0,1,2,3",
"EventCode": "0x15",
"EventName": "UNC_H_RPQ_CYCLES_NO_REG_CREDITS.CHN1",
"PerPkg": "1",
@@ -2582,7 +2370,6 @@
},
{
"BriefDescription": "iMC RPQ Credits Empty - Regular; Channel 2",
- "Counter": "0,1,2,3",
"EventCode": "0x15",
"EventName": "UNC_H_RPQ_CYCLES_NO_REG_CREDITS.CHN2",
"PerPkg": "1",
@@ -2592,7 +2379,6 @@
},
{
"BriefDescription": "iMC RPQ Credits Empty - Regular; Channel 3",
- "Counter": "0,1,2,3",
"EventCode": "0x15",
"EventName": "UNC_H_RPQ_CYCLES_NO_REG_CREDITS.CHN3",
"PerPkg": "1",
@@ -2602,7 +2388,6 @@
},
{
"BriefDescription": "iMC RPQ Credits Empty - Special; Channel 0",
- "Counter": "0,1,2,3",
"EventCode": "0x16",
"EventName": "UNC_H_RPQ_CYCLES_NO_SPEC_CREDITS.CHN0",
"PerPkg": "1",
@@ -2612,7 +2397,6 @@
},
{
"BriefDescription": "iMC RPQ Credits Empty - Special; Channel 1",
- "Counter": "0,1,2,3",
"EventCode": "0x16",
"EventName": "UNC_H_RPQ_CYCLES_NO_SPEC_CREDITS.CHN1",
"PerPkg": "1",
@@ -2622,7 +2406,6 @@
},
{
"BriefDescription": "iMC RPQ Credits Empty - Special; Channel 2",
- "Counter": "0,1,2,3",
"EventCode": "0x16",
"EventName": "UNC_H_RPQ_CYCLES_NO_SPEC_CREDITS.CHN2",
"PerPkg": "1",
@@ -2632,7 +2415,6 @@
},
{
"BriefDescription": "iMC RPQ Credits Empty - Special; Channel 3",
- "Counter": "0,1,2,3",
"EventCode": "0x16",
"EventName": "UNC_H_RPQ_CYCLES_NO_SPEC_CREDITS.CHN3",
"PerPkg": "1",
@@ -2642,7 +2424,6 @@
},
{
"BriefDescription": "Snoop Responses Received; RSPCNFLCT*",
- "Counter": "0,1,2,3",
"EventCode": "0x21",
"EventName": "UNC_H_SNOOP_RESP.RSPCNFLCT",
"PerPkg": "1",
@@ -2652,7 +2433,6 @@
},
{
"BriefDescription": "Snoop Responses Received; RspI",
- "Counter": "0,1,2,3",
"EventCode": "0x21",
"EventName": "UNC_H_SNOOP_RESP.RSPI",
"PerPkg": "1",
@@ -2662,7 +2442,6 @@
},
{
"BriefDescription": "Snoop Responses Received; RspIFwd",
- "Counter": "0,1,2,3",
"EventCode": "0x21",
"EventName": "UNC_H_SNOOP_RESP.RSPIFWD",
"PerPkg": "1",
@@ -2672,7 +2451,6 @@
},
{
"BriefDescription": "Snoop Responses Received; RspS",
- "Counter": "0,1,2,3",
"EventCode": "0x21",
"EventName": "UNC_H_SNOOP_RESP.RSPS",
"PerPkg": "1",
@@ -2682,7 +2460,6 @@
},
{
"BriefDescription": "Snoop Responses Received; RspSFwd",
- "Counter": "0,1,2,3",
"EventCode": "0x21",
"EventName": "UNC_H_SNOOP_RESP.RSPSFWD",
"PerPkg": "1",
@@ -2692,7 +2469,6 @@
},
{
"BriefDescription": "Snoop Responses Received; Rsp*Fwd*WB",
- "Counter": "0,1,2,3",
"EventCode": "0x21",
"EventName": "UNC_H_SNOOP_RESP.RSP_FWD_WB",
"PerPkg": "1",
@@ -2702,7 +2478,6 @@
},
{
"BriefDescription": "Snoop Responses Received; Rsp*WB",
- "Counter": "0,1,2,3",
"EventCode": "0x21",
"EventName": "UNC_H_SNOOP_RESP.RSP_WB",
"PerPkg": "1",
@@ -2712,7 +2487,6 @@
},
{
"BriefDescription": "Snoop Responses Received Local; Other",
- "Counter": "0,1,2,3",
"EventCode": "0x60",
"EventName": "UNC_H_SNP_RESP_RECV_LOCAL.OTHER",
"PerPkg": "1",
@@ -2722,7 +2496,6 @@
},
{
"BriefDescription": "Snoop Responses Received Local; RspCnflct",
- "Counter": "0,1,2,3",
"EventCode": "0x60",
"EventName": "UNC_H_SNP_RESP_RECV_LOCAL.RSPCNFLCT",
"PerPkg": "1",
@@ -2732,7 +2505,6 @@
},
{
"BriefDescription": "Snoop Responses Received Local; RspI",
- "Counter": "0,1,2,3",
"EventCode": "0x60",
"EventName": "UNC_H_SNP_RESP_RECV_LOCAL.RSPI",
"PerPkg": "1",
@@ -2742,7 +2514,6 @@
},
{
"BriefDescription": "Snoop Responses Received Local; RspIFwd",
- "Counter": "0,1,2,3",
"EventCode": "0x60",
"EventName": "UNC_H_SNP_RESP_RECV_LOCAL.RSPIFWD",
"PerPkg": "1",
@@ -2752,7 +2523,6 @@
},
{
"BriefDescription": "Snoop Responses Received Local; RspS",
- "Counter": "0,1,2,3",
"EventCode": "0x60",
"EventName": "UNC_H_SNP_RESP_RECV_LOCAL.RSPS",
"PerPkg": "1",
@@ -2762,7 +2532,6 @@
},
{
"BriefDescription": "Snoop Responses Received Local; RspSFwd",
- "Counter": "0,1,2,3",
"EventCode": "0x60",
"EventName": "UNC_H_SNP_RESP_RECV_LOCAL.RSPSFWD",
"PerPkg": "1",
@@ -2772,7 +2541,6 @@
},
{
"BriefDescription": "Snoop Responses Received Local; Rsp*FWD*WB",
- "Counter": "0,1,2,3",
"EventCode": "0x60",
"EventName": "UNC_H_SNP_RESP_RECV_LOCAL.RSPxFWDxWB",
"PerPkg": "1",
@@ -2782,7 +2550,6 @@
},
{
"BriefDescription": "Snoop Responses Received Local; Rsp*WB",
- "Counter": "0,1,2,3",
"EventCode": "0x60",
"EventName": "UNC_H_SNP_RESP_RECV_LOCAL.RSPxWB",
"PerPkg": "1",
@@ -2792,7 +2559,6 @@
},
{
"BriefDescription": "HA Requests to a TAD Region - Group 0; TAD Region 0",
- "Counter": "0,1,2,3",
"EventCode": "0x1b",
"EventName": "UNC_H_TAD_REQUESTS_G0.REGION0",
"PerPkg": "1",
@@ -2802,7 +2568,6 @@
},
{
"BriefDescription": "HA Requests to a TAD Region - Group 0; TAD Region 1",
- "Counter": "0,1,2,3",
"EventCode": "0x1b",
"EventName": "UNC_H_TAD_REQUESTS_G0.REGION1",
"PerPkg": "1",
@@ -2812,7 +2577,6 @@
},
{
"BriefDescription": "HA Requests to a TAD Region - Group 0; TAD Region 2",
- "Counter": "0,1,2,3",
"EventCode": "0x1b",
"EventName": "UNC_H_TAD_REQUESTS_G0.REGION2",
"PerPkg": "1",
@@ -2822,7 +2586,6 @@
},
{
"BriefDescription": "HA Requests to a TAD Region - Group 0; TAD Region 3",
- "Counter": "0,1,2,3",
"EventCode": "0x1b",
"EventName": "UNC_H_TAD_REQUESTS_G0.REGION3",
"PerPkg": "1",
@@ -2832,7 +2595,6 @@
},
{
"BriefDescription": "HA Requests to a TAD Region - Group 0; TAD Region 4",
- "Counter": "0,1,2,3",
"EventCode": "0x1b",
"EventName": "UNC_H_TAD_REQUESTS_G0.REGION4",
"PerPkg": "1",
@@ -2842,7 +2604,6 @@
},
{
"BriefDescription": "HA Requests to a TAD Region - Group 0; TAD Region 5",
- "Counter": "0,1,2,3",
"EventCode": "0x1b",
"EventName": "UNC_H_TAD_REQUESTS_G0.REGION5",
"PerPkg": "1",
@@ -2852,7 +2613,6 @@
},
{
"BriefDescription": "HA Requests to a TAD Region - Group 0; TAD Region 6",
- "Counter": "0,1,2,3",
"EventCode": "0x1b",
"EventName": "UNC_H_TAD_REQUESTS_G0.REGION6",
"PerPkg": "1",
@@ -2862,7 +2622,6 @@
},
{
"BriefDescription": "HA Requests to a TAD Region - Group 0; TAD Region 7",
- "Counter": "0,1,2,3",
"EventCode": "0x1b",
"EventName": "UNC_H_TAD_REQUESTS_G0.REGION7",
"PerPkg": "1",
@@ -2872,7 +2631,6 @@
},
{
"BriefDescription": "HA Requests to a TAD Region - Group 1; TAD Region 10",
- "Counter": "0,1,2,3",
"EventCode": "0x1c",
"EventName": "UNC_H_TAD_REQUESTS_G1.REGION10",
"PerPkg": "1",
@@ -2882,7 +2640,6 @@
},
{
"BriefDescription": "HA Requests to a TAD Region - Group 1; TAD Region 11",
- "Counter": "0,1,2,3",
"EventCode": "0x1c",
"EventName": "UNC_H_TAD_REQUESTS_G1.REGION11",
"PerPkg": "1",
@@ -2892,7 +2649,6 @@
},
{
"BriefDescription": "HA Requests to a TAD Region - Group 1; TAD Region 8",
- "Counter": "0,1,2,3",
"EventCode": "0x1c",
"EventName": "UNC_H_TAD_REQUESTS_G1.REGION8",
"PerPkg": "1",
@@ -2902,7 +2658,6 @@
},
{
"BriefDescription": "HA Requests to a TAD Region - Group 1; TAD Region 9",
- "Counter": "0,1,2,3",
"EventCode": "0x1c",
"EventName": "UNC_H_TAD_REQUESTS_G1.REGION9",
"PerPkg": "1",
@@ -2912,7 +2667,6 @@
},
{
"BriefDescription": "Tracker Cycles Not Empty",
- "Counter": "0,1,2,3",
"EventCode": "0x3",
"EventName": "UNC_H_TRACKER_CYCLES_NE",
"PerPkg": "1",
@@ -2921,7 +2675,6 @@
},
{
"BriefDescription": "Outbound NDR Ring Transactions; Non-data Responses",
- "Counter": "0,1,2,3",
"EventCode": "0xF",
"EventName": "UNC_H_TxR_AD.HOM",
"PerPkg": "1",
@@ -2931,7 +2684,6 @@
},
{
"BriefDescription": "AD Egress Full; All",
- "Counter": "0,1,2,3",
"EventCode": "0x2a",
"EventName": "UNC_H_TxR_AD_CYCLES_FULL.ALL",
"PerPkg": "1",
@@ -2941,7 +2693,6 @@
},
{
"BriefDescription": "AD Egress Full; Scheduler 0",
- "Counter": "0,1,2,3",
"EventCode": "0x2a",
"EventName": "UNC_H_TxR_AD_CYCLES_FULL.SCHED0",
"PerPkg": "1",
@@ -2951,7 +2702,6 @@
},
{
"BriefDescription": "AD Egress Full; Scheduler 1",
- "Counter": "0,1,2,3",
"EventCode": "0x2a",
"EventName": "UNC_H_TxR_AD_CYCLES_FULL.SCHED1",
"PerPkg": "1",
@@ -2961,7 +2711,6 @@
},
{
"BriefDescription": "AD Egress Not Empty; All",
- "Counter": "0,1,2,3",
"EventCode": "0x29",
"EventName": "UNC_H_TxR_AD_CYCLES_NE.ALL",
"PerPkg": "1",
@@ -2971,7 +2720,6 @@
},
{
"BriefDescription": "AD Egress Not Empty; Scheduler 0",
- "Counter": "0,1,2,3",
"EventCode": "0x29",
"EventName": "UNC_H_TxR_AD_CYCLES_NE.SCHED0",
"PerPkg": "1",
@@ -2981,7 +2729,6 @@
},
{
"BriefDescription": "AD Egress Not Empty; Scheduler 1",
- "Counter": "0,1,2,3",
"EventCode": "0x29",
"EventName": "UNC_H_TxR_AD_CYCLES_NE.SCHED1",
"PerPkg": "1",
@@ -2991,7 +2738,6 @@
},
{
"BriefDescription": "AD Egress Allocations; All",
- "Counter": "0,1,2,3",
"EventCode": "0x27",
"EventName": "UNC_H_TxR_AD_INSERTS.ALL",
"PerPkg": "1",
@@ -3001,7 +2747,6 @@
},
{
"BriefDescription": "AD Egress Allocations; Scheduler 0",
- "Counter": "0,1,2,3",
"EventCode": "0x27",
"EventName": "UNC_H_TxR_AD_INSERTS.SCHED0",
"PerPkg": "1",
@@ -3011,7 +2756,6 @@
},
{
"BriefDescription": "AD Egress Allocations; Scheduler 1",
- "Counter": "0,1,2,3",
"EventCode": "0x27",
"EventName": "UNC_H_TxR_AD_INSERTS.SCHED1",
"PerPkg": "1",
@@ -3021,7 +2765,6 @@
},
{
"BriefDescription": "AD Egress Occupancy; Scheduler 0",
- "Counter": "0,1,2,3",
"EventCode": "0x28",
"EventName": "UNC_H_TxR_AD_OCCUPANCY.SCHED0",
"PerPkg": "1",
@@ -3031,7 +2774,6 @@
},
{
"BriefDescription": "AD Egress Occupancy; Scheduler 1",
- "Counter": "0,1,2,3",
"EventCode": "0x28",
"EventName": "UNC_H_TxR_AD_OCCUPANCY.SCHED1",
"PerPkg": "1",
@@ -3041,7 +2783,6 @@
},
{
"BriefDescription": "Outbound Ring Transactions on AK: CRD Transactions to Cbo",
- "Counter": "0,1,2,3",
"EventCode": "0xe",
"EventName": "UNC_H_TxR_AK.CRD_CBO",
"PerPkg": "1",
@@ -3050,7 +2791,6 @@
},
{
"BriefDescription": "AK Egress Full; All",
- "Counter": "0,1,2,3",
"EventCode": "0x32",
"EventName": "UNC_H_TxR_AK_CYCLES_FULL.ALL",
"PerPkg": "1",
@@ -3060,7 +2800,6 @@
},
{
"BriefDescription": "AK Egress Full; Scheduler 0",
- "Counter": "0,1,2,3",
"EventCode": "0x32",
"EventName": "UNC_H_TxR_AK_CYCLES_FULL.SCHED0",
"PerPkg": "1",
@@ -3070,7 +2809,6 @@
},
{
"BriefDescription": "AK Egress Full; Scheduler 1",
- "Counter": "0,1,2,3",
"EventCode": "0x32",
"EventName": "UNC_H_TxR_AK_CYCLES_FULL.SCHED1",
"PerPkg": "1",
@@ -3080,7 +2818,6 @@
},
{
"BriefDescription": "AK Egress Not Empty; All",
- "Counter": "0,1,2,3",
"EventCode": "0x31",
"EventName": "UNC_H_TxR_AK_CYCLES_NE.ALL",
"PerPkg": "1",
@@ -3090,7 +2827,6 @@
},
{
"BriefDescription": "AK Egress Not Empty; Scheduler 0",
- "Counter": "0,1,2,3",
"EventCode": "0x31",
"EventName": "UNC_H_TxR_AK_CYCLES_NE.SCHED0",
"PerPkg": "1",
@@ -3100,7 +2836,6 @@
},
{
"BriefDescription": "AK Egress Not Empty; Scheduler 1",
- "Counter": "0,1,2,3",
"EventCode": "0x31",
"EventName": "UNC_H_TxR_AK_CYCLES_NE.SCHED1",
"PerPkg": "1",
@@ -3110,7 +2845,6 @@
},
{
"BriefDescription": "AK Egress Allocations; All",
- "Counter": "0,1,2,3",
"EventCode": "0x2f",
"EventName": "UNC_H_TxR_AK_INSERTS.ALL",
"PerPkg": "1",
@@ -3120,7 +2854,6 @@
},
{
"BriefDescription": "AK Egress Allocations; Scheduler 0",
- "Counter": "0,1,2,3",
"EventCode": "0x2f",
"EventName": "UNC_H_TxR_AK_INSERTS.SCHED0",
"PerPkg": "1",
@@ -3130,7 +2863,6 @@
},
{
"BriefDescription": "AK Egress Allocations; Scheduler 1",
- "Counter": "0,1,2,3",
"EventCode": "0x2f",
"EventName": "UNC_H_TxR_AK_INSERTS.SCHED1",
"PerPkg": "1",
@@ -3140,7 +2872,6 @@
},
{
"BriefDescription": "AK Egress Occupancy; Scheduler 0",
- "Counter": "0,1,2,3",
"EventCode": "0x30",
"EventName": "UNC_H_TxR_AK_OCCUPANCY.SCHED0",
"PerPkg": "1",
@@ -3150,7 +2881,6 @@
},
{
"BriefDescription": "AK Egress Occupancy; Scheduler 1",
- "Counter": "0,1,2,3",
"EventCode": "0x30",
"EventName": "UNC_H_TxR_AK_OCCUPANCY.SCHED1",
"PerPkg": "1",
@@ -3160,7 +2890,6 @@
},
{
"BriefDescription": "Outbound DRS Ring Transactions to Cache; Data to Cache",
- "Counter": "0,1,2,3",
"EventCode": "0x10",
"EventName": "UNC_H_TxR_BL.DRS_CACHE",
"PerPkg": "1",
@@ -3170,7 +2899,6 @@
},
{
"BriefDescription": "Outbound DRS Ring Transactions to Cache; Data to Core",
- "Counter": "0,1,2,3",
"EventCode": "0x10",
"EventName": "UNC_H_TxR_BL.DRS_CORE",
"PerPkg": "1",
@@ -3180,7 +2908,6 @@
},
{
"BriefDescription": "Outbound DRS Ring Transactions to Cache; Data to QPI",
- "Counter": "0,1,2,3",
"EventCode": "0x10",
"EventName": "UNC_H_TxR_BL.DRS_QPI",
"PerPkg": "1",
@@ -3190,7 +2917,6 @@
},
{
"BriefDescription": "BL Egress Full; All",
- "Counter": "0,1,2,3",
"EventCode": "0x36",
"EventName": "UNC_H_TxR_BL_CYCLES_FULL.ALL",
"PerPkg": "1",
@@ -3200,7 +2926,6 @@
},
{
"BriefDescription": "BL Egress Full; Scheduler 0",
- "Counter": "0,1,2,3",
"EventCode": "0x36",
"EventName": "UNC_H_TxR_BL_CYCLES_FULL.SCHED0",
"PerPkg": "1",
@@ -3210,7 +2935,6 @@
},
{
"BriefDescription": "BL Egress Full; Scheduler 1",
- "Counter": "0,1,2,3",
"EventCode": "0x36",
"EventName": "UNC_H_TxR_BL_CYCLES_FULL.SCHED1",
"PerPkg": "1",
@@ -3220,7 +2944,6 @@
},
{
"BriefDescription": "BL Egress Not Empty; All",
- "Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "UNC_H_TxR_BL_CYCLES_NE.ALL",
"PerPkg": "1",
@@ -3230,7 +2953,6 @@
},
{
"BriefDescription": "BL Egress Not Empty; Scheduler 0",
- "Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "UNC_H_TxR_BL_CYCLES_NE.SCHED0",
"PerPkg": "1",
@@ -3240,7 +2962,6 @@
},
{
"BriefDescription": "BL Egress Not Empty; Scheduler 1",
- "Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "UNC_H_TxR_BL_CYCLES_NE.SCHED1",
"PerPkg": "1",
@@ -3250,7 +2971,6 @@
},
{
"BriefDescription": "BL Egress Allocations; All",
- "Counter": "0,1,2,3",
"EventCode": "0x33",
"EventName": "UNC_H_TxR_BL_INSERTS.ALL",
"PerPkg": "1",
@@ -3260,7 +2980,6 @@
},
{
"BriefDescription": "BL Egress Allocations; Scheduler 0",
- "Counter": "0,1,2,3",
"EventCode": "0x33",
"EventName": "UNC_H_TxR_BL_INSERTS.SCHED0",
"PerPkg": "1",
@@ -3270,7 +2989,6 @@
},
{
"BriefDescription": "BL Egress Allocations; Scheduler 1",
- "Counter": "0,1,2,3",
"EventCode": "0x33",
"EventName": "UNC_H_TxR_BL_INSERTS.SCHED1",
"PerPkg": "1",
@@ -3280,17 +2998,14 @@
},
{
"BriefDescription": "BL Egress Occupancy: All",
- "Counter": "0,1,2,3",
"EventCode": "0x34",
"EventName": "UNC_H_TxR_BL_OCCUPANCY.ALL",
"PerPkg": "1",
- "PublicDescription": "BL Egress Occupancy",
"UMask": "0x3",
"Unit": "HA"
},
{
"BriefDescription": "BL Egress Occupancy; Scheduler 0",
- "Counter": "0,1,2,3",
"EventCode": "0x34",
"EventName": "UNC_H_TxR_BL_OCCUPANCY.SCHED0",
"PerPkg": "1",
@@ -3300,7 +3015,6 @@
},
{
"BriefDescription": "BL Egress Occupancy; Scheduler 1",
- "Counter": "0,1,2,3",
"EventCode": "0x34",
"EventName": "UNC_H_TxR_BL_OCCUPANCY.SCHED1",
"PerPkg": "1",
@@ -3310,7 +3024,6 @@
},
{
"BriefDescription": "HA iMC CHN0 WPQ Credits Empty - Regular; Channel 0",
- "Counter": "0,1,2,3",
"EventCode": "0x18",
"EventName": "UNC_H_WPQ_CYCLES_NO_REG_CREDITS.CHN0",
"PerPkg": "1",
@@ -3320,7 +3033,6 @@
},
{
"BriefDescription": "HA iMC CHN0 WPQ Credits Empty - Regular; Channel 1",
- "Counter": "0,1,2,3",
"EventCode": "0x18",
"EventName": "UNC_H_WPQ_CYCLES_NO_REG_CREDITS.CHN1",
"PerPkg": "1",
@@ -3330,7 +3042,6 @@
},
{
"BriefDescription": "HA iMC CHN0 WPQ Credits Empty - Regular; Channel 2",
- "Counter": "0,1,2,3",
"EventCode": "0x18",
"EventName": "UNC_H_WPQ_CYCLES_NO_REG_CREDITS.CHN2",
"PerPkg": "1",
@@ -3340,7 +3051,6 @@
},
{
"BriefDescription": "HA iMC CHN0 WPQ Credits Empty - Regular; Channel 3",
- "Counter": "0,1,2,3",
"EventCode": "0x18",
"EventName": "UNC_H_WPQ_CYCLES_NO_REG_CREDITS.CHN3",
"PerPkg": "1",
@@ -3350,7 +3060,6 @@
},
{
"BriefDescription": "HA iMC CHN0 WPQ Credits Empty - Special; Channel 0",
- "Counter": "0,1,2,3",
"EventCode": "0x19",
"EventName": "UNC_H_WPQ_CYCLES_NO_SPEC_CREDITS.CHN0",
"PerPkg": "1",
@@ -3360,7 +3069,6 @@
},
{
"BriefDescription": "HA iMC CHN0 WPQ Credits Empty - Special; Channel 1",
- "Counter": "0,1,2,3",
"EventCode": "0x19",
"EventName": "UNC_H_WPQ_CYCLES_NO_SPEC_CREDITS.CHN1",
"PerPkg": "1",
@@ -3370,7 +3078,6 @@
},
{
"BriefDescription": "HA iMC CHN0 WPQ Credits Empty - Special; Channel 2",
- "Counter": "0,1,2,3",
"EventCode": "0x19",
"EventName": "UNC_H_WPQ_CYCLES_NO_SPEC_CREDITS.CHN2",
"PerPkg": "1",
@@ -3380,7 +3087,6 @@
},
{
"BriefDescription": "HA iMC CHN0 WPQ Credits Empty - Special; Channel 3",
- "Counter": "0,1,2,3",
"EventCode": "0x19",
"EventName": "UNC_H_WPQ_CYCLES_NO_SPEC_CREDITS.CHN3",
"PerPkg": "1",
diff --git a/tools/perf/pmu-events/arch/x86/ivytown/uncore-interconnect.json b/tools/perf/pmu-events/arch/x86/ivytown/uncore-interconnect.json
index 10ea4afeffc1..e1b9799e3036 100644
--- a/tools/perf/pmu-events/arch/x86/ivytown/uncore-interconnect.json
+++ b/tools/perf/pmu-events/arch/x86/ivytown/uncore-interconnect.json
@@ -1,7 +1,6 @@
[
{
"BriefDescription": "Number of qfclks",
- "Counter": "0,1,2,3",
"EventCode": "0x14",
"EventName": "UNC_Q_CLOCKTICKS",
"PerPkg": "1",
@@ -10,17 +9,14 @@
},
{
"BriefDescription": "Count of CTO Events",
- "Counter": "0,1,2,3",
"EventCode": "0x38",
"EventName": "UNC_Q_CTO_COUNT",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of CTO (cluster trigger outs) events that were asserted across the two slots. If both slots trigger in a given cycle, the event will increment by 2. You can use edge detect to count the number of cases when both events triggered.",
"Unit": "QPI LL"
},
{
"BriefDescription": "Direct 2 Core Spawning; Spawn Failure - Egress Credits",
- "Counter": "0,1,2,3",
"EventCode": "0x13",
"EventName": "UNC_Q_DIRECT2CORE.FAILURE_CREDITS",
"PerPkg": "1",
@@ -30,7 +26,6 @@
},
{
"BriefDescription": "Direct 2 Core Spawning; Spawn Failure - Egress and RBT Miss",
- "Counter": "0,1,2,3",
"EventCode": "0x13",
"EventName": "UNC_Q_DIRECT2CORE.FAILURE_CREDITS_MISS",
"PerPkg": "1",
@@ -40,7 +35,6 @@
},
{
"BriefDescription": "Direct 2 Core Spawning; Spawn Failure - Egress and RBT Invalid",
- "Counter": "0,1,2,3",
"EventCode": "0x13",
"EventName": "UNC_Q_DIRECT2CORE.FAILURE_CREDITS_RBT",
"PerPkg": "1",
@@ -50,7 +44,6 @@
},
{
"BriefDescription": "Direct 2 Core Spawning; Spawn Failure - Egress and RBT Miss, Invalid",
- "Counter": "0,1,2,3",
"EventCode": "0x13",
"EventName": "UNC_Q_DIRECT2CORE.FAILURE_CREDITS_RBT_MISS",
"PerPkg": "1",
@@ -60,7 +53,6 @@
},
{
"BriefDescription": "Direct 2 Core Spawning; Spawn Failure - RBT Miss",
- "Counter": "0,1,2,3",
"EventCode": "0x13",
"EventName": "UNC_Q_DIRECT2CORE.FAILURE_MISS",
"PerPkg": "1",
@@ -70,7 +62,6 @@
},
{
"BriefDescription": "Direct 2 Core Spawning; Spawn Failure - RBT Invalid",
- "Counter": "0,1,2,3",
"EventCode": "0x13",
"EventName": "UNC_Q_DIRECT2CORE.FAILURE_RBT_HIT",
"PerPkg": "1",
@@ -80,7 +71,6 @@
},
{
"BriefDescription": "Direct 2 Core Spawning; Spawn Failure - RBT Miss and Invalid",
- "Counter": "0,1,2,3",
"EventCode": "0x13",
"EventName": "UNC_Q_DIRECT2CORE.FAILURE_RBT_MISS",
"PerPkg": "1",
@@ -90,7 +80,6 @@
},
{
"BriefDescription": "Direct 2 Core Spawning; Spawn Success",
- "Counter": "0,1,2,3",
"EventCode": "0x13",
"EventName": "UNC_Q_DIRECT2CORE.SUCCESS_RBT_HIT",
"PerPkg": "1",
@@ -100,16 +89,212 @@
},
{
"BriefDescription": "Cycles in L1",
- "Counter": "0,1,2,3",
"EventCode": "0x12",
"EventName": "UNC_Q_L1_POWER_CYCLES",
"PerPkg": "1",
"PublicDescription": "Number of QPI qfclk cycles spent in L1 power mode. L1 is a mode that totally shuts down a QPI link. Use edge detect to count the number of instances when the QPI link entered L1. Link power states are per link and per direction, so for example the Tx direction could be in one state while Rx was in another. Because L1 totally shuts down the link, it takes a good amount of time to exit this mode.",
"Unit": "QPI LL"
},
+ {
+ "EventCode": "0x38",
+ "EventName": "UNC_Q_MATCH_MASK",
+ "PerPkg": "1",
+ "Unit": "QPI LL"
+ },
+ {
+ "EventCode": "0x38",
+ "EventName": "UNC_Q_MESSAGE.DRS.AnyDataC",
+ "PerPkg": "1",
+ "Unit": "QPI LL"
+ },
+ {
+ "EventCode": "0x38",
+ "EventName": "UNC_Q_MESSAGE.DRS.AnyResp",
+ "PerPkg": "1",
+ "Unit": "QPI LL"
+ },
+ {
+ "EventCode": "0x38",
+ "EventName": "UNC_Q_MESSAGE.DRS.AnyResp11flits",
+ "PerPkg": "1",
+ "Unit": "QPI LL"
+ },
+ {
+ "EventCode": "0x38",
+ "EventName": "UNC_Q_MESSAGE.DRS.AnyResp9flits",
+ "PerPkg": "1",
+ "Unit": "QPI LL"
+ },
+ {
+ "EventCode": "0x38",
+ "EventName": "UNC_Q_MESSAGE.DRS.DataC_E",
+ "PerPkg": "1",
+ "Unit": "QPI LL"
+ },
+ {
+ "EventCode": "0x38",
+ "EventName": "UNC_Q_MESSAGE.DRS.DataC_E_Cmp",
+ "PerPkg": "1",
+ "Unit": "QPI LL"
+ },
+ {
+ "EventCode": "0x38",
+ "EventName": "UNC_Q_MESSAGE.DRS.DataC_E_FrcAckCnflt",
+ "PerPkg": "1",
+ "Unit": "QPI LL"
+ },
+ {
+ "EventCode": "0x38",
+ "EventName": "UNC_Q_MESSAGE.DRS.DataC_F",
+ "PerPkg": "1",
+ "Unit": "QPI LL"
+ },
+ {
+ "EventCode": "0x38",
+ "EventName": "UNC_Q_MESSAGE.DRS.DataC_F_Cmp",
+ "PerPkg": "1",
+ "Unit": "QPI LL"
+ },
+ {
+ "EventCode": "0x38",
+ "EventName": "UNC_Q_MESSAGE.DRS.DataC_F_FrcAckCnflt",
+ "PerPkg": "1",
+ "Unit": "QPI LL"
+ },
+ {
+ "EventCode": "0x38",
+ "EventName": "UNC_Q_MESSAGE.DRS.DataC_M",
+ "PerPkg": "1",
+ "Unit": "QPI LL"
+ },
+ {
+ "EventCode": "0x38",
+ "EventName": "UNC_Q_MESSAGE.DRS.WbEData",
+ "PerPkg": "1",
+ "Unit": "QPI LL"
+ },
+ {
+ "EventCode": "0x38",
+ "EventName": "UNC_Q_MESSAGE.DRS.WbIData",
+ "PerPkg": "1",
+ "Unit": "QPI LL"
+ },
+ {
+ "EventCode": "0x38",
+ "EventName": "UNC_Q_MESSAGE.DRS.WbSData",
+ "PerPkg": "1",
+ "Unit": "QPI LL"
+ },
+ {
+ "EventCode": "0x38",
+ "EventName": "UNC_Q_MESSAGE.HOM.AnyReq",
+ "PerPkg": "1",
+ "Unit": "QPI LL"
+ },
+ {
+ "EventCode": "0x38",
+ "EventName": "UNC_Q_MESSAGE.HOM.AnyResp",
+ "PerPkg": "1",
+ "Unit": "QPI LL"
+ },
+ {
+ "EventCode": "0x38",
+ "EventName": "UNC_Q_MESSAGE.HOM.RespFwd",
+ "PerPkg": "1",
+ "Unit": "QPI LL"
+ },
+ {
+ "EventCode": "0x38",
+ "EventName": "UNC_Q_MESSAGE.HOM.RespFwdI",
+ "PerPkg": "1",
+ "Unit": "QPI LL"
+ },
+ {
+ "EventCode": "0x38",
+ "EventName": "UNC_Q_MESSAGE.HOM.RespFwdIWb",
+ "PerPkg": "1",
+ "Unit": "QPI LL"
+ },
+ {
+ "EventCode": "0x38",
+ "EventName": "UNC_Q_MESSAGE.HOM.RespFwdS",
+ "PerPkg": "1",
+ "Unit": "QPI LL"
+ },
+ {
+ "EventCode": "0x38",
+ "EventName": "UNC_Q_MESSAGE.HOM.RespFwdSWb",
+ "PerPkg": "1",
+ "Unit": "QPI LL"
+ },
+ {
+ "EventCode": "0x38",
+ "EventName": "UNC_Q_MESSAGE.HOM.RespIWb",
+ "PerPkg": "1",
+ "Unit": "QPI LL"
+ },
+ {
+ "EventCode": "0x38",
+ "EventName": "UNC_Q_MESSAGE.HOM.RespSWb",
+ "PerPkg": "1",
+ "Unit": "QPI LL"
+ },
+ {
+ "EventCode": "0x38",
+ "EventName": "UNC_Q_MESSAGE.NCB.AnyInt",
+ "PerPkg": "1",
+ "Unit": "QPI LL"
+ },
+ {
+ "EventCode": "0x38",
+ "EventName": "UNC_Q_MESSAGE.NCB.AnyMsg",
+ "PerPkg": "1",
+ "Unit": "QPI LL"
+ },
+ {
+ "EventCode": "0x38",
+ "EventName": "UNC_Q_MESSAGE.NCB.AnyMsg11flits",
+ "PerPkg": "1",
+ "Unit": "QPI LL"
+ },
+ {
+ "EventCode": "0x38",
+ "EventName": "UNC_Q_MESSAGE.NCB.AnyMsg9flits",
+ "PerPkg": "1",
+ "Unit": "QPI LL"
+ },
+ {
+ "EventCode": "0x38",
+ "EventName": "UNC_Q_MESSAGE.NCS.AnyMsg1or2flits",
+ "PerPkg": "1",
+ "Unit": "QPI LL"
+ },
+ {
+ "EventCode": "0x38",
+ "EventName": "UNC_Q_MESSAGE.NCS.AnyMsg3flits",
+ "PerPkg": "1",
+ "Unit": "QPI LL"
+ },
+ {
+ "EventCode": "0x38",
+ "EventName": "UNC_Q_MESSAGE.NCS.NcRd",
+ "PerPkg": "1",
+ "Unit": "QPI LL"
+ },
+ {
+ "EventCode": "0x38",
+ "EventName": "UNC_Q_MESSAGE.NDR.AnyCmp",
+ "PerPkg": "1",
+ "Unit": "QPI LL"
+ },
+ {
+ "EventCode": "0x38",
+ "EventName": "UNC_Q_MESSAGE.SNP.AnySnp",
+ "PerPkg": "1",
+ "Unit": "QPI LL"
+ },
{
"BriefDescription": "Cycles in L0p",
- "Counter": "0,1,2,3",
"EventCode": "0x10",
"EventName": "UNC_Q_RxL0P_POWER_CYCLES",
"PerPkg": "1",
@@ -118,7 +303,6 @@
},
{
"BriefDescription": "Cycles in L0",
- "Counter": "0,1,2,3",
"EventCode": "0xf",
"EventName": "UNC_Q_RxL0_POWER_CYCLES",
"PerPkg": "1",
@@ -127,7 +311,6 @@
},
{
"BriefDescription": "Rx Flit Buffer Bypassed",
- "Counter": "0,1,2,3",
"EventCode": "0x9",
"EventName": "UNC_Q_RxL_BYPASSED",
"PerPkg": "1",
@@ -136,7 +319,6 @@
},
{
"BriefDescription": "CRC Errors Detected; LinkInit",
- "Counter": "0,1,2,3",
"EventCode": "0x3",
"EventName": "UNC_Q_RxL_CRC_ERRORS.LINK_INIT",
"PerPkg": "1",
@@ -146,7 +328,6 @@
},
{
"BriefDescription": "CRC Errors Detected; Normal Operations",
- "Counter": "0,1,2,3",
"EventCode": "0x3",
"EventName": "UNC_Q_RxL_CRC_ERRORS.NORMAL_OP",
"PerPkg": "1",
@@ -156,10 +337,8 @@
},
{
"BriefDescription": "VN0 Credit Consumed; DRS",
- "Counter": "0,1,2,3",
"EventCode": "0x1e",
"EventName": "UNC_Q_RxL_CREDITS_CONSUMED_VN0.DRS",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of times that an RxQ VN0 credit was consumed (i.e. message uses a VN0 credit for the Rx Buffer). This includes packets that went through the RxQ and those that were bypasssed.; VN0 credit for the DRS message class.",
"UMask": "0x1",
@@ -167,10 +346,8 @@
},
{
"BriefDescription": "VN0 Credit Consumed; HOM",
- "Counter": "0,1,2,3",
"EventCode": "0x1e",
"EventName": "UNC_Q_RxL_CREDITS_CONSUMED_VN0.HOM",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of times that an RxQ VN0 credit was consumed (i.e. message uses a VN0 credit for the Rx Buffer). This includes packets that went through the RxQ and those that were bypasssed.; VN0 credit for the HOM message class.",
"UMask": "0x8",
@@ -178,10 +355,8 @@
},
{
"BriefDescription": "VN0 Credit Consumed; NCB",
- "Counter": "0,1,2,3",
"EventCode": "0x1e",
"EventName": "UNC_Q_RxL_CREDITS_CONSUMED_VN0.NCB",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of times that an RxQ VN0 credit was consumed (i.e. message uses a VN0 credit for the Rx Buffer). This includes packets that went through the RxQ and those that were bypasssed.; VN0 credit for the NCB message class.",
"UMask": "0x2",
@@ -189,10 +364,8 @@
},
{
"BriefDescription": "VN0 Credit Consumed; NCS",
- "Counter": "0,1,2,3",
"EventCode": "0x1e",
"EventName": "UNC_Q_RxL_CREDITS_CONSUMED_VN0.NCS",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of times that an RxQ VN0 credit was consumed (i.e. message uses a VN0 credit for the Rx Buffer). This includes packets that went through the RxQ and those that were bypasssed.; VN0 credit for the NCS message class.",
"UMask": "0x4",
@@ -200,10 +373,8 @@
},
{
"BriefDescription": "VN0 Credit Consumed; NDR",
- "Counter": "0,1,2,3",
"EventCode": "0x1e",
"EventName": "UNC_Q_RxL_CREDITS_CONSUMED_VN0.NDR",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of times that an RxQ VN0 credit was consumed (i.e. message uses a VN0 credit for the Rx Buffer). This includes packets that went through the RxQ and those that were bypasssed.; VN0 credit for the NDR message class.",
"UMask": "0x20",
@@ -211,10 +382,8 @@
},
{
"BriefDescription": "VN0 Credit Consumed; SNP",
- "Counter": "0,1,2,3",
"EventCode": "0x1e",
"EventName": "UNC_Q_RxL_CREDITS_CONSUMED_VN0.SNP",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of times that an RxQ VN0 credit was consumed (i.e. message uses a VN0 credit for the Rx Buffer). This includes packets that went through the RxQ and those that were bypasssed.; VN0 credit for the SNP message class.",
"UMask": "0x10",
@@ -222,10 +391,8 @@
},
{
"BriefDescription": "VN1 Credit Consumed; DRS",
- "Counter": "0,1,2,3",
"EventCode": "0x39",
"EventName": "UNC_Q_RxL_CREDITS_CONSUMED_VN1.DRS",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of times that an RxQ VN1 credit was consumed (i.e. message uses a VN1 credit for the Rx Buffer). This includes packets that went through the RxQ and those that were bypasssed.; VN1 credit for the DRS message class.",
"UMask": "0x1",
@@ -233,10 +400,8 @@
},
{
"BriefDescription": "VN1 Credit Consumed; HOM",
- "Counter": "0,1,2,3",
"EventCode": "0x39",
"EventName": "UNC_Q_RxL_CREDITS_CONSUMED_VN1.HOM",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of times that an RxQ VN1 credit was consumed (i.e. message uses a VN1 credit for the Rx Buffer). This includes packets that went through the RxQ and those that were bypasssed.; VN1 credit for the HOM message class.",
"UMask": "0x8",
@@ -244,10 +409,8 @@
},
{
"BriefDescription": "VN1 Credit Consumed; NCB",
- "Counter": "0,1,2,3",
"EventCode": "0x39",
"EventName": "UNC_Q_RxL_CREDITS_CONSUMED_VN1.NCB",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of times that an RxQ VN1 credit was consumed (i.e. message uses a VN1 credit for the Rx Buffer). This includes packets that went through the RxQ and those that were bypasssed.; VN1 credit for the NCB message class.",
"UMask": "0x2",
@@ -255,10 +418,8 @@
},
{
"BriefDescription": "VN1 Credit Consumed; NCS",
- "Counter": "0,1,2,3",
"EventCode": "0x39",
"EventName": "UNC_Q_RxL_CREDITS_CONSUMED_VN1.NCS",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of times that an RxQ VN1 credit was consumed (i.e. message uses a VN1 credit for the Rx Buffer). This includes packets that went through the RxQ and those that were bypasssed.; VN1 credit for the NCS message class.",
"UMask": "0x4",
@@ -266,10 +427,8 @@
},
{
"BriefDescription": "VN1 Credit Consumed; NDR",
- "Counter": "0,1,2,3",
"EventCode": "0x39",
"EventName": "UNC_Q_RxL_CREDITS_CONSUMED_VN1.NDR",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of times that an RxQ VN1 credit was consumed (i.e. message uses a VN1 credit for the Rx Buffer). This includes packets that went through the RxQ and those that were bypasssed.; VN1 credit for the NDR message class.",
"UMask": "0x20",
@@ -277,10 +436,8 @@
},
{
"BriefDescription": "VN1 Credit Consumed; SNP",
- "Counter": "0,1,2,3",
"EventCode": "0x39",
"EventName": "UNC_Q_RxL_CREDITS_CONSUMED_VN1.SNP",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of times that an RxQ VN1 credit was consumed (i.e. message uses a VN1 credit for the Rx Buffer). This includes packets that went through the RxQ and those that were bypasssed.; VN1 credit for the SNP message class.",
"UMask": "0x10",
@@ -288,17 +445,14 @@
},
{
"BriefDescription": "VNA Credit Consumed",
- "Counter": "0,1,2,3",
"EventCode": "0x1d",
"EventName": "UNC_Q_RxL_CREDITS_CONSUMED_VNA",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of times that an RxQ VNA credit was consumed (i.e. message uses a VNA credit for the Rx Buffer). This includes packets that went through the RxQ and those that were bypasssed.",
"Unit": "QPI LL"
},
{
"BriefDescription": "RxQ Cycles Not Empty",
- "Counter": "0,1,2,3",
"EventCode": "0xa",
"EventName": "UNC_Q_RxL_CYCLES_NE",
"PerPkg": "1",
@@ -307,10 +461,8 @@
},
{
"BriefDescription": "RxQ Cycles Not Empty - DRS; for VN0",
- "Counter": "0,1,2,3",
"EventCode": "0xF",
"EventName": "UNC_Q_RxL_CYCLES_NE_DRS.VN0",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the QPI RxQ was not empty. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Occupancy Accumulator event to calculate the average occupancy. This monitors DRS flits only.",
"UMask": "0x1",
@@ -318,10 +470,8 @@
},
{
"BriefDescription": "RxQ Cycles Not Empty - DRS; for VN1",
- "Counter": "0,1,2,3",
"EventCode": "0xF",
"EventName": "UNC_Q_RxL_CYCLES_NE_DRS.VN1",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the QPI RxQ was not empty. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Occupancy Accumulator event to calculate the average occupancy. This monitors DRS flits only.",
"UMask": "0x2",
@@ -329,10 +479,8 @@
},
{
"BriefDescription": "RxQ Cycles Not Empty - HOM; for VN0",
- "Counter": "0,1,2,3",
"EventCode": "0x12",
"EventName": "UNC_Q_RxL_CYCLES_NE_HOM.VN0",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the QPI RxQ was not empty. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Occupancy Accumulator event to calculate the average occupancy. This monitors HOM flits only.",
"UMask": "0x1",
@@ -340,10 +488,8 @@
},
{
"BriefDescription": "RxQ Cycles Not Empty - HOM; for VN1",
- "Counter": "0,1,2,3",
"EventCode": "0x12",
"EventName": "UNC_Q_RxL_CYCLES_NE_HOM.VN1",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the QPI RxQ was not empty. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Occupancy Accumulator event to calculate the average occupancy. This monitors HOM flits only.",
"UMask": "0x2",
@@ -351,10 +497,8 @@
},
{
"BriefDescription": "RxQ Cycles Not Empty - NCB; for VN0",
- "Counter": "0,1,2,3",
"EventCode": "0x10",
"EventName": "UNC_Q_RxL_CYCLES_NE_NCB.VN0",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the QPI RxQ was not empty. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Occupancy Accumulator event to calculate the average occupancy. This monitors NCB flits only.",
"UMask": "0x1",
@@ -362,10 +506,8 @@
},
{
"BriefDescription": "RxQ Cycles Not Empty - NCB; for VN1",
- "Counter": "0,1,2,3",
"EventCode": "0x10",
"EventName": "UNC_Q_RxL_CYCLES_NE_NCB.VN1",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the QPI RxQ was not empty. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Occupancy Accumulator event to calculate the average occupancy. This monitors NCB flits only.",
"UMask": "0x2",
@@ -373,10 +515,8 @@
},
{
"BriefDescription": "RxQ Cycles Not Empty - NCS; for VN0",
- "Counter": "0,1,2,3",
"EventCode": "0x11",
"EventName": "UNC_Q_RxL_CYCLES_NE_NCS.VN0",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the QPI RxQ was not empty. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Occupancy Accumulator event to calculate the average occupancy. This monitors NCS flits only.",
"UMask": "0x1",
@@ -384,10 +524,8 @@
},
{
"BriefDescription": "RxQ Cycles Not Empty - NCS; for VN1",
- "Counter": "0,1,2,3",
"EventCode": "0x11",
"EventName": "UNC_Q_RxL_CYCLES_NE_NCS.VN1",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the QPI RxQ was not empty. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Occupancy Accumulator event to calculate the average occupancy. This monitors NCS flits only.",
"UMask": "0x2",
@@ -395,10 +533,8 @@
},
{
"BriefDescription": "RxQ Cycles Not Empty - NDR; for VN0",
- "Counter": "0,1,2,3",
"EventCode": "0x14",
"EventName": "UNC_Q_RxL_CYCLES_NE_NDR.VN0",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the QPI RxQ was not empty. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Occupancy Accumulator event to calculate the average occupancy. This monitors NDR flits only.",
"UMask": "0x1",
@@ -406,10 +542,8 @@
},
{
"BriefDescription": "RxQ Cycles Not Empty - NDR; for VN1",
- "Counter": "0,1,2,3",
"EventCode": "0x14",
"EventName": "UNC_Q_RxL_CYCLES_NE_NDR.VN1",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the QPI RxQ was not empty. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Occupancy Accumulator event to calculate the average occupancy. This monitors NDR flits only.",
"UMask": "0x2",
@@ -417,10 +551,8 @@
},
{
"BriefDescription": "RxQ Cycles Not Empty - SNP; for VN0",
- "Counter": "0,1,2,3",
"EventCode": "0x13",
"EventName": "UNC_Q_RxL_CYCLES_NE_SNP.VN0",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the QPI RxQ was not empty. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Occupancy Accumulator event to calculate the average occupancy. This monitors SNP flits only.",
"UMask": "0x1",
@@ -428,10 +560,8 @@
},
{
"BriefDescription": "RxQ Cycles Not Empty - SNP; for VN1",
- "Counter": "0,1,2,3",
"EventCode": "0x13",
"EventName": "UNC_Q_RxL_CYCLES_NE_SNP.VN1",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the QPI RxQ was not empty. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Occupancy Accumulator event to calculate the average occupancy. This monitors SNP flits only.",
"UMask": "0x2",
@@ -439,7 +569,6 @@
},
{
"BriefDescription": "Flits Received - Group 0; Data Tx Flits",
- "Counter": "0,1,2,3",
"EventCode": "0x1",
"EventName": "UNC_Q_RxL_FLITS_G0.DATA",
"PerPkg": "1",
@@ -449,7 +578,6 @@
},
{
"BriefDescription": "Flits Received - Group 0; Idle and Null Flits",
- "Counter": "0,1,2,3",
"EventCode": "0x1",
"EventName": "UNC_Q_RxL_FLITS_G0.IDLE",
"PerPkg": "1",
@@ -459,7 +587,6 @@
},
{
"BriefDescription": "Flits Received - Group 0; Non-Data protocol Tx Flits",
- "Counter": "0,1,2,3",
"EventCode": "0x1",
"EventName": "UNC_Q_RxL_FLITS_G0.NON_DATA",
"PerPkg": "1",
@@ -469,10 +596,8 @@
},
{
"BriefDescription": "Flits Received - Group 1; DRS Flits (both Header and Data)",
- "Counter": "0,1,2,3",
"EventCode": "0x2",
"EventName": "UNC_Q_RxL_FLITS_G1.DRS",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three groups that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each flit is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits. Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as data bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information. To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the total number of flits received over QPI on the DRS (Data Response) channel. DRS flits are used to transmit data with coherency. This does not count data flits received over the NCB channel which transmits non-coherent data.",
"UMask": "0x18",
@@ -480,10 +605,8 @@
},
{
"BriefDescription": "Flits Received - Group 1; DRS Data Flits",
- "Counter": "0,1,2,3",
"EventCode": "0x2",
"EventName": "UNC_Q_RxL_FLITS_G1.DRS_DATA",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three groups that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each flit is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits. Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as data bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information. To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the total number of data flits received over QPI on the DRS (Data Response) channel. DRS flits are used to transmit data with coherency. This does not count data flits received over the NCB channel which transmits non-coherent data. This includes only the data flits (not the header).",
"UMask": "0x8",
@@ -491,10 +614,8 @@
},
{
"BriefDescription": "Flits Received - Group 1; DRS Header Flits",
- "Counter": "0,1,2,3",
"EventCode": "0x2",
"EventName": "UNC_Q_RxL_FLITS_G1.DRS_NONDATA",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three groups that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each flit is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits. Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as data bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information. To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the total number of protocol flits received over QPI on the DRS (Data Response) channel. DRS flits are used to transmit data with coherency. This does not count data flits received over the NCB channel which transmits non-coherent data. This includes only the header flits (not the data). This includes extended headers.",
"UMask": "0x10",
@@ -502,10 +623,8 @@
},
{
"BriefDescription": "Flits Received - Group 1; HOM Flits",
- "Counter": "0,1,2,3",
"EventCode": "0x2",
"EventName": "UNC_Q_RxL_FLITS_G1.HOM",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three groups that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each flit is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits. Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as data bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information. To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the number of flits received over QPI on the home channel.",
"UMask": "0x6",
@@ -513,10 +632,8 @@
},
{
"BriefDescription": "Flits Received - Group 1; HOM Non-Request Flits",
- "Counter": "0,1,2,3",
"EventCode": "0x2",
"EventName": "UNC_Q_RxL_FLITS_G1.HOM_NONREQ",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three groups that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each flit is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits. Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as data bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information. To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the number of non-request flits received over QPI on the home channel. These are most commonly snoop responses, and this event can be used as a proxy for that.",
"UMask": "0x4",
@@ -524,10 +641,8 @@
},
{
"BriefDescription": "Flits Received - Group 1; HOM Request Flits",
- "Counter": "0,1,2,3",
"EventCode": "0x2",
"EventName": "UNC_Q_RxL_FLITS_G1.HOM_REQ",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three groups that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each flit is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits. Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as data bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information. To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the number of data request received over QPI on the home channel. This basically counts the number of remote memory requests received over QPI. In conjunction with the local read count in the Home Agent, one can calculate the number of LLC Misses.",
"UMask": "0x2",
@@ -535,10 +650,8 @@
},
{
"BriefDescription": "Flits Received - Group 1; SNP Flits",
- "Counter": "0,1,2,3",
"EventCode": "0x2",
"EventName": "UNC_Q_RxL_FLITS_G1.SNP",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three groups that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each flit is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits. Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as data bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information. To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the number of snoop request flits received over QPI. These requests are contained in the snoop channel. This does not include snoop responses, which are received on the home channel.",
"UMask": "0x1",
@@ -546,21 +659,17 @@
},
{
"BriefDescription": "Flits Received - Group 2; Non-Coherent Rx Flits",
- "Counter": "0,1,2,3",
"EventCode": "0x3",
"EventName": "UNC_Q_RxL_FLITS_G2.NCB",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three groups that allow us to track flits. It includes filters for NDR, NCB, and NCS message classes. Each flit is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits. Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as data bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information. To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Number of Non-Coherent Bypass flits. These packets are generally used to transmit non-coherent data across QPI.",
- "UMask": "0xC",
+ "UMask": "0xc",
"Unit": "QPI LL"
},
{
"BriefDescription": "Flits Received - Group 2; Non-Coherent data Rx Flits",
- "Counter": "0,1,2,3",
"EventCode": "0x3",
"EventName": "UNC_Q_RxL_FLITS_G2.NCB_DATA",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three groups that allow us to track flits. It includes filters for NDR, NCB, and NCS message classes. Each flit is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits. Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as data bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information. To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Number of Non-Coherent Bypass data flits. These flits are generally used to transmit non-coherent data across QPI. This does not include a count of the DRS (coherent) data flits. This only counts the data flits, not the NCB headers.",
"UMask": "0x4",
@@ -568,10 +677,8 @@
},
{
"BriefDescription": "Flits Received - Group 2; Non-Coherent non-data Rx Flits",
- "Counter": "0,1,2,3",
"EventCode": "0x3",
"EventName": "UNC_Q_RxL_FLITS_G2.NCB_NONDATA",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three groups that allow us to track flits. It includes filters for NDR, NCB, and NCS message classes. Each flit is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits. Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as data bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information. To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Number of Non-Coherent Bypass non-data flits. These packets are generally used to transmit non-coherent data across QPI, and the flits counted here are for headers and other non-data flits. This includes extended headers.",
"UMask": "0x8",
@@ -579,10 +686,8 @@
},
{
"BriefDescription": "Flits Received - Group 2; Non-Coherent standard Rx Flits",
- "Counter": "0,1,2,3",
"EventCode": "0x3",
"EventName": "UNC_Q_RxL_FLITS_G2.NCS",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three groups that allow us to track flits. It includes filters for NDR, NCB, and NCS message classes. Each flit is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits. Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as data bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information. To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Number of NCS (non-coherent standard) flits received over QPI. This includes extended headers.",
"UMask": "0x10",
@@ -590,10 +695,8 @@
},
{
"BriefDescription": "Flits Received - Group 2; Non-Data Response Rx Flits - AD",
- "Counter": "0,1,2,3",
"EventCode": "0x3",
"EventName": "UNC_Q_RxL_FLITS_G2.NDR_AD",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three groups that allow us to track flits. It includes filters for NDR, NCB, and NCS message classes. Each flit is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits. Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as data bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information. To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the total number of flits received over the NDR (Non-Data Response) channel. This channel is used to send a variety of protocol flits including grants and completions. This is only for NDR packets to the local socket which use the AK ring.",
"UMask": "0x1",
@@ -601,10 +704,8 @@
},
{
"BriefDescription": "Flits Received - Group 2; Non-Data Response Rx Flits - AK",
- "Counter": "0,1,2,3",
"EventCode": "0x3",
"EventName": "UNC_Q_RxL_FLITS_G2.NDR_AK",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of flits received from the QPI Link. This is one of three groups that allow us to track flits. It includes filters for NDR, NCB, and NCS message classes. Each flit is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits. Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as data bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information. To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the total number of flits received over the NDR (Non-Data Response) channel. This channel is used to send a variety of protocol flits including grants and completions. This is only for NDR packets destined for Route-thru to a remote socket.",
"UMask": "0x2",
@@ -612,7 +713,6 @@
},
{
"BriefDescription": "Rx Flit Buffer Allocations",
- "Counter": "0,1,2,3",
"EventCode": "0x8",
"EventName": "UNC_Q_RxL_INSERTS",
"PerPkg": "1",
@@ -621,20 +721,16 @@
},
{
"BriefDescription": "Rx Flit Buffer Allocations - DRS",
- "Counter": "0,1,2,3",
"EventCode": "0x9",
"EventName": "UNC_Q_RxL_INSERTS_DRS",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of allocations into the QPI Rx Flit Buffer. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Occupancy event in order to calculate the average flit buffer lifetime. This monitors only DRS flits.",
"Unit": "QPI LL"
},
{
"BriefDescription": "Rx Flit Buffer Allocations - DRS; for VN0",
- "Counter": "0,1,2,3",
"EventCode": "0x9",
"EventName": "UNC_Q_RxL_INSERTS_DRS.VN0",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of allocations into the QPI Rx Flit Buffer. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Occupancy event in order to calculate the average flit buffer lifetime. This monitors only DRS flits.",
"UMask": "0x1",
@@ -642,10 +738,8 @@
},
{
"BriefDescription": "Rx Flit Buffer Allocations - DRS; for VN1",
- "Counter": "0,1,2,3",
"EventCode": "0x9",
"EventName": "UNC_Q_RxL_INSERTS_DRS.VN1",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of allocations into the QPI Rx Flit Buffer. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Occupancy event in order to calculate the average flit buffer lifetime. This monitors only DRS flits.",
"UMask": "0x2",
@@ -653,20 +747,16 @@
},
{
"BriefDescription": "Rx Flit Buffer Allocations - HOM",
- "Counter": "0,1,2,3",
"EventCode": "0xc",
"EventName": "UNC_Q_RxL_INSERTS_HOM",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of allocations into the QPI Rx Flit Buffer. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Occupancy event in order to calculate the average flit buffer lifetime. This monitors only HOM flits.",
"Unit": "QPI LL"
},
{
"BriefDescription": "Rx Flit Buffer Allocations - HOM; for VN0",
- "Counter": "0,1,2,3",
"EventCode": "0xC",
"EventName": "UNC_Q_RxL_INSERTS_HOM.VN0",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of allocations into the QPI Rx Flit Buffer. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Occupancy event in order to calculate the average flit buffer lifetime. This monitors only HOM flits.",
"UMask": "0x1",
@@ -674,10 +764,8 @@
},
{
"BriefDescription": "Rx Flit Buffer Allocations - HOM; for VN1",
- "Counter": "0,1,2,3",
"EventCode": "0xC",
"EventName": "UNC_Q_RxL_INSERTS_HOM.VN1",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of allocations into the QPI Rx Flit Buffer. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Occupancy event in order to calculate the average flit buffer lifetime. This monitors only HOM flits.",
"UMask": "0x2",
@@ -685,20 +773,16 @@
},
{
"BriefDescription": "Rx Flit Buffer Allocations - NCB",
- "Counter": "0,1,2,3",
"EventCode": "0xa",
"EventName": "UNC_Q_RxL_INSERTS_NCB",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of allocations into the QPI Rx Flit Buffer. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Occupancy event in order to calculate the average flit buffer lifetime. This monitors only NCB flits.",
"Unit": "QPI LL"
},
{
"BriefDescription": "Rx Flit Buffer Allocations - NCB; for VN0",
- "Counter": "0,1,2,3",
"EventCode": "0xA",
"EventName": "UNC_Q_RxL_INSERTS_NCB.VN0",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of allocations into the QPI Rx Flit Buffer. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Occupancy event in order to calculate the average flit buffer lifetime. This monitors only NCB flits.",
"UMask": "0x1",
@@ -706,10 +790,8 @@
},
{
"BriefDescription": "Rx Flit Buffer Allocations - NCB; for VN1",
- "Counter": "0,1,2,3",
"EventCode": "0xA",
"EventName": "UNC_Q_RxL_INSERTS_NCB.VN1",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of allocations into the QPI Rx Flit Buffer. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Occupancy event in order to calculate the average flit buffer lifetime. This monitors only NCB flits.",
"UMask": "0x2",
@@ -717,20 +799,16 @@
},
{
"BriefDescription": "Rx Flit Buffer Allocations - NCS",
- "Counter": "0,1,2,3",
"EventCode": "0xb",
"EventName": "UNC_Q_RxL_INSERTS_NCS",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of allocations into the QPI Rx Flit Buffer. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Occupancy event in order to calculate the average flit buffer lifetime. This monitors only NCS flits.",
"Unit": "QPI LL"
},
{
"BriefDescription": "Rx Flit Buffer Allocations - NCS; for VN0",
- "Counter": "0,1,2,3",
"EventCode": "0xB",
"EventName": "UNC_Q_RxL_INSERTS_NCS.VN0",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of allocations into the QPI Rx Flit Buffer. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Occupancy event in order to calculate the average flit buffer lifetime. This monitors only NCS flits.",
"UMask": "0x1",
@@ -738,10 +816,8 @@
},
{
"BriefDescription": "Rx Flit Buffer Allocations - NCS; for VN1",
- "Counter": "0,1,2,3",
"EventCode": "0xB",
"EventName": "UNC_Q_RxL_INSERTS_NCS.VN1",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of allocations into the QPI Rx Flit Buffer. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Occupancy event in order to calculate the average flit buffer lifetime. This monitors only NCS flits.",
"UMask": "0x2",
@@ -749,20 +825,16 @@
},
{
"BriefDescription": "Rx Flit Buffer Allocations - NDR",
- "Counter": "0,1,2,3",
"EventCode": "0xe",
"EventName": "UNC_Q_RxL_INSERTS_NDR",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of allocations into the QPI Rx Flit Buffer. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Occupancy event in order to calculate the average flit buffer lifetime. This monitors only NDR flits.",
"Unit": "QPI LL"
},
{
"BriefDescription": "Rx Flit Buffer Allocations - NDR; for VN0",
- "Counter": "0,1,2,3",
"EventCode": "0xE",
"EventName": "UNC_Q_RxL_INSERTS_NDR.VN0",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of allocations into the QPI Rx Flit Buffer. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Occupancy event in order to calculate the average flit buffer lifetime. This monitors only NDR flits.",
"UMask": "0x1",
@@ -770,10 +842,8 @@
},
{
"BriefDescription": "Rx Flit Buffer Allocations - NDR; for VN1",
- "Counter": "0,1,2,3",
"EventCode": "0xE",
"EventName": "UNC_Q_RxL_INSERTS_NDR.VN1",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of allocations into the QPI Rx Flit Buffer. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Occupancy event in order to calculate the average flit buffer lifetime. This monitors only NDR flits.",
"UMask": "0x2",
@@ -781,20 +851,16 @@
},
{
"BriefDescription": "Rx Flit Buffer Allocations - SNP",
- "Counter": "0,1,2,3",
"EventCode": "0xd",
"EventName": "UNC_Q_RxL_INSERTS_SNP",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of allocations into the QPI Rx Flit Buffer. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Occupancy event in order to calculate the average flit buffer lifetime. This monitors only SNP flits.",
"Unit": "QPI LL"
},
{
"BriefDescription": "Rx Flit Buffer Allocations - SNP; for VN0",
- "Counter": "0,1,2,3",
"EventCode": "0xD",
"EventName": "UNC_Q_RxL_INSERTS_SNP.VN0",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of allocations into the QPI Rx Flit Buffer. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Occupancy event in order to calculate the average flit buffer lifetime. This monitors only SNP flits.",
"UMask": "0x1",
@@ -802,10 +868,8 @@
},
{
"BriefDescription": "Rx Flit Buffer Allocations - SNP; for VN1",
- "Counter": "0,1,2,3",
"EventCode": "0xD",
"EventName": "UNC_Q_RxL_INSERTS_SNP.VN1",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of allocations into the QPI Rx Flit Buffer. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Occupancy event in order to calculate the average flit buffer lifetime. This monitors only SNP flits.",
"UMask": "0x2",
@@ -813,7 +877,6 @@
},
{
"BriefDescription": "RxQ Occupancy - All Packets",
- "Counter": "0,1,2,3",
"EventCode": "0xb",
"EventName": "UNC_Q_RxL_OCCUPANCY",
"PerPkg": "1",
@@ -822,20 +885,16 @@
},
{
"BriefDescription": "RxQ Occupancy - DRS",
- "Counter": "0,1,2,3",
"EventCode": "0x15",
"EventName": "UNC_Q_RxL_OCCUPANCY_DRS",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Accumulates the number of elements in the QPI RxQ in each cycle. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Not Empty event to calculate average occupancy, or with the Flit Buffer Allocations event to track average lifetime. This monitors DRS flits only.",
"Unit": "QPI LL"
},
{
"BriefDescription": "RxQ Occupancy - DRS; for VN0",
- "Counter": "0,1,2,3",
"EventCode": "0x15",
"EventName": "UNC_Q_RxL_OCCUPANCY_DRS.VN0",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Accumulates the number of elements in the QPI RxQ in each cycle. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Not Empty event to calculate average occupancy, or with the Flit Buffer Allocations event to track average lifetime. This monitors DRS flits only.",
"UMask": "0x1",
@@ -843,10 +902,8 @@
},
{
"BriefDescription": "RxQ Occupancy - DRS; for VN1",
- "Counter": "0,1,2,3",
"EventCode": "0x15",
"EventName": "UNC_Q_RxL_OCCUPANCY_DRS.VN1",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Accumulates the number of elements in the QPI RxQ in each cycle. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Not Empty event to calculate average occupancy, or with the Flit Buffer Allocations event to track average lifetime. This monitors DRS flits only.",
"UMask": "0x2",
@@ -854,20 +911,16 @@
},
{
"BriefDescription": "RxQ Occupancy - HOM",
- "Counter": "0,1,2,3",
"EventCode": "0x18",
"EventName": "UNC_Q_RxL_OCCUPANCY_HOM",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Accumulates the number of elements in the QPI RxQ in each cycle. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Not Empty event to calculate average occupancy, or with the Flit Buffer Allocations event to track average lifetime. This monitors HOM flits only.",
"Unit": "QPI LL"
},
{
"BriefDescription": "RxQ Occupancy - HOM; for VN0",
- "Counter": "0,1,2,3",
"EventCode": "0x18",
"EventName": "UNC_Q_RxL_OCCUPANCY_HOM.VN0",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Accumulates the number of elements in the QPI RxQ in each cycle. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Not Empty event to calculate average occupancy, or with the Flit Buffer Allocations event to track average lifetime. This monitors HOM flits only.",
"UMask": "0x1",
@@ -875,10 +928,8 @@
},
{
"BriefDescription": "RxQ Occupancy - HOM; for VN1",
- "Counter": "0,1,2,3",
"EventCode": "0x18",
"EventName": "UNC_Q_RxL_OCCUPANCY_HOM.VN1",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Accumulates the number of elements in the QPI RxQ in each cycle. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Not Empty event to calculate average occupancy, or with the Flit Buffer Allocations event to track average lifetime. This monitors HOM flits only.",
"UMask": "0x2",
@@ -886,20 +937,16 @@
},
{
"BriefDescription": "RxQ Occupancy - NCB",
- "Counter": "0,1,2,3",
"EventCode": "0x16",
"EventName": "UNC_Q_RxL_OCCUPANCY_NCB",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Accumulates the number of elements in the QPI RxQ in each cycle. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Not Empty event to calculate average occupancy, or with the Flit Buffer Allocations event to track average lifetime. This monitors NCB flits only.",
"Unit": "QPI LL"
},
{
"BriefDescription": "RxQ Occupancy - NCB; for VN0",
- "Counter": "0,1,2,3",
"EventCode": "0x16",
"EventName": "UNC_Q_RxL_OCCUPANCY_NCB.VN0",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Accumulates the number of elements in the QPI RxQ in each cycle. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Not Empty event to calculate average occupancy, or with the Flit Buffer Allocations event to track average lifetime. This monitors NCB flits only.",
"UMask": "0x1",
@@ -907,10 +954,8 @@
},
{
"BriefDescription": "RxQ Occupancy - NCB; for VN1",
- "Counter": "0,1,2,3",
"EventCode": "0x16",
"EventName": "UNC_Q_RxL_OCCUPANCY_NCB.VN1",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Accumulates the number of elements in the QPI RxQ in each cycle. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Not Empty event to calculate average occupancy, or with the Flit Buffer Allocations event to track average lifetime. This monitors NCB flits only.",
"UMask": "0x2",
@@ -918,20 +963,16 @@
},
{
"BriefDescription": "RxQ Occupancy - NCS",
- "Counter": "0,1,2,3",
"EventCode": "0x17",
"EventName": "UNC_Q_RxL_OCCUPANCY_NCS",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Accumulates the number of elements in the QPI RxQ in each cycle. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Not Empty event to calculate average occupancy, or with the Flit Buffer Allocations event to track average lifetime. This monitors NCS flits only.",
"Unit": "QPI LL"
},
{
"BriefDescription": "RxQ Occupancy - NCS; for VN0",
- "Counter": "0,1,2,3",
"EventCode": "0x17",
"EventName": "UNC_Q_RxL_OCCUPANCY_NCS.VN0",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Accumulates the number of elements in the QPI RxQ in each cycle. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Not Empty event to calculate average occupancy, or with the Flit Buffer Allocations event to track average lifetime. This monitors NCS flits only.",
"UMask": "0x1",
@@ -939,10 +980,8 @@
},
{
"BriefDescription": "RxQ Occupancy - NCS; for VN1",
- "Counter": "0,1,2,3",
"EventCode": "0x17",
"EventName": "UNC_Q_RxL_OCCUPANCY_NCS.VN1",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Accumulates the number of elements in the QPI RxQ in each cycle. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Not Empty event to calculate average occupancy, or with the Flit Buffer Allocations event to track average lifetime. This monitors NCS flits only.",
"UMask": "0x2",
@@ -950,20 +989,16 @@
},
{
"BriefDescription": "RxQ Occupancy - NDR",
- "Counter": "0,1,2,3",
"EventCode": "0x1a",
"EventName": "UNC_Q_RxL_OCCUPANCY_NDR",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Accumulates the number of elements in the QPI RxQ in each cycle. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Not Empty event to calculate average occupancy, or with the Flit Buffer Allocations event to track average lifetime. This monitors NDR flits only.",
"Unit": "QPI LL"
},
{
"BriefDescription": "RxQ Occupancy - NDR; for VN0",
- "Counter": "0,1,2,3",
"EventCode": "0x1A",
"EventName": "UNC_Q_RxL_OCCUPANCY_NDR.VN0",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Accumulates the number of elements in the QPI RxQ in each cycle. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Not Empty event to calculate average occupancy, or with the Flit Buffer Allocations event to track average lifetime. This monitors NDR flits only.",
"UMask": "0x1",
@@ -971,10 +1006,8 @@
},
{
"BriefDescription": "RxQ Occupancy - NDR; for VN1",
- "Counter": "0,1,2,3",
"EventCode": "0x1A",
"EventName": "UNC_Q_RxL_OCCUPANCY_NDR.VN1",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Accumulates the number of elements in the QPI RxQ in each cycle. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Not Empty event to calculate average occupancy, or with the Flit Buffer Allocations event to track average lifetime. This monitors NDR flits only.",
"UMask": "0x2",
@@ -982,20 +1015,16 @@
},
{
"BriefDescription": "RxQ Occupancy - SNP",
- "Counter": "0,1,2,3",
"EventCode": "0x19",
"EventName": "UNC_Q_RxL_OCCUPANCY_SNP",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Accumulates the number of elements in the QPI RxQ in each cycle. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Not Empty event to calculate average occupancy, or with the Flit Buffer Allocations event to track average lifetime. This monitors SNP flits only.",
"Unit": "QPI LL"
},
{
"BriefDescription": "RxQ Occupancy - SNP; for VN0",
- "Counter": "0,1,2,3",
"EventCode": "0x19",
"EventName": "UNC_Q_RxL_OCCUPANCY_SNP.VN0",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Accumulates the number of elements in the QPI RxQ in each cycle. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Not Empty event to calculate average occupancy, or with the Flit Buffer Allocations event to track average lifetime. This monitors SNP flits only.",
"UMask": "0x1",
@@ -1003,10 +1032,8 @@
},
{
"BriefDescription": "RxQ Occupancy - SNP; for VN1",
- "Counter": "0,1,2,3",
"EventCode": "0x19",
"EventName": "UNC_Q_RxL_OCCUPANCY_SNP.VN1",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Accumulates the number of elements in the QPI RxQ in each cycle. Generally, when data is transmitted across QPI, it will bypass the RxQ and pass directly to the ring interface. If things back up getting transmitted onto the ring, however, it may need to allocate into this buffer, thus increasing the latency. This event can be used in conjunction with the Flit Buffer Not Empty event to calculate average occupancy, or with the Flit Buffer Allocations event to track average lifetime. This monitors SNP flits only.",
"UMask": "0x2",
@@ -1014,10 +1041,8 @@
},
{
"BriefDescription": "Stalls Sending to R3QPI on VN0; BGF Stall - HOM",
- "Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "UNC_Q_RxL_STALLS_VN0.BGF_DRS",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of stalls trying to send to R3QPI on Virtual Network 0; Stalled a packet from the HOM message class because there were not enough BGF credits. In bypass mode, we will stall on the packet boundary, while in RxQ mode we will stall on the flit boundary.",
"UMask": "0x1",
@@ -1025,10 +1050,8 @@
},
{
"BriefDescription": "Stalls Sending to R3QPI on VN0; BGF Stall - DRS",
- "Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "UNC_Q_RxL_STALLS_VN0.BGF_HOM",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of stalls trying to send to R3QPI on Virtual Network 0; Stalled a packet from the DRS message class because there were not enough BGF credits. In bypass mode, we will stall on the packet boundary, while in RxQ mode we will stall on the flit boundary.",
"UMask": "0x8",
@@ -1036,10 +1059,8 @@
},
{
"BriefDescription": "Stalls Sending to R3QPI on VN0; BGF Stall - SNP",
- "Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "UNC_Q_RxL_STALLS_VN0.BGF_NCB",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of stalls trying to send to R3QPI on Virtual Network 0; Stalled a packet from the SNP message class because there were not enough BGF credits. In bypass mode, we will stall on the packet boundary, while in RxQ mode we will stall on the flit boundary.",
"UMask": "0x2",
@@ -1047,10 +1068,8 @@
},
{
"BriefDescription": "Stalls Sending to R3QPI on VN0; BGF Stall - NDR",
- "Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "UNC_Q_RxL_STALLS_VN0.BGF_NCS",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of stalls trying to send to R3QPI on Virtual Network 0; Stalled a packet from the NDR message class because there were not enough BGF credits. In bypass mode, we will stall on the packet boundary, while in RxQ mode we will stall on the flit boundary.",
"UMask": "0x4",
@@ -1058,10 +1077,8 @@
},
{
"BriefDescription": "Stalls Sending to R3QPI on VN0; BGF Stall - NCS",
- "Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "UNC_Q_RxL_STALLS_VN0.BGF_NDR",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of stalls trying to send to R3QPI on Virtual Network 0; Stalled a packet from the NCS message class because there were not enough BGF credits. In bypass mode, we will stall on the packet boundary, while in RxQ mode we will stall on the flit boundary.",
"UMask": "0x20",
@@ -1069,10 +1086,8 @@
},
{
"BriefDescription": "Stalls Sending to R3QPI on VN0; BGF Stall - NCB",
- "Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "UNC_Q_RxL_STALLS_VN0.BGF_SNP",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of stalls trying to send to R3QPI on Virtual Network 0; Stalled a packet from the NCB message class because there were not enough BGF credits. In bypass mode, we will stall on the packet boundary, while in RxQ mode we will stall on the flit boundary.",
"UMask": "0x10",
@@ -1080,10 +1095,8 @@
},
{
"BriefDescription": "Stalls Sending to R3QPI on VN0; Egress Credits",
- "Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "UNC_Q_RxL_STALLS_VN0.EGRESS_CREDITS",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of stalls trying to send to R3QPI on Virtual Network 0; Stalled a packet because there were insufficient BGF credits. For details on a message class granularity, use the Egress Credit Occupancy events.",
"UMask": "0x40",
@@ -1091,10 +1104,8 @@
},
{
"BriefDescription": "Stalls Sending to R3QPI on VN0; GV",
- "Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "UNC_Q_RxL_STALLS_VN0.GV",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of stalls trying to send to R3QPI on Virtual Network 0; Stalled because a GV transition (frequency transition) was taking place.",
"UMask": "0x80",
@@ -1102,10 +1113,8 @@
},
{
"BriefDescription": "Stalls Sending to R3QPI on VN1; BGF Stall - HOM",
- "Counter": "0,1,2,3",
"EventCode": "0x3a",
"EventName": "UNC_Q_RxL_STALLS_VN1.BGF_DRS",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of stalls trying to send to R3QPI on Virtual Network 1.; Stalled a packet from the HOM message class because there were not enough BGF credits. In bypass mode, we will stall on the packet boundary, while in RxQ mode we will stall on the flit boundary.",
"UMask": "0x1",
@@ -1113,10 +1122,8 @@
},
{
"BriefDescription": "Stalls Sending to R3QPI on VN1; BGF Stall - DRS",
- "Counter": "0,1,2,3",
"EventCode": "0x3a",
"EventName": "UNC_Q_RxL_STALLS_VN1.BGF_HOM",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of stalls trying to send to R3QPI on Virtual Network 1.; Stalled a packet from the DRS message class because there were not enough BGF credits. In bypass mode, we will stall on the packet boundary, while in RxQ mode we will stall on the flit boundary.",
"UMask": "0x8",
@@ -1124,10 +1131,8 @@
},
{
"BriefDescription": "Stalls Sending to R3QPI on VN1; BGF Stall - SNP",
- "Counter": "0,1,2,3",
"EventCode": "0x3a",
"EventName": "UNC_Q_RxL_STALLS_VN1.BGF_NCB",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of stalls trying to send to R3QPI on Virtual Network 1.; Stalled a packet from the SNP message class because there were not enough BGF credits. In bypass mode, we will stall on the packet boundary, while in RxQ mode we will stall on the flit boundary.",
"UMask": "0x2",
@@ -1135,10 +1140,8 @@
},
{
"BriefDescription": "Stalls Sending to R3QPI on VN1; BGF Stall - NDR",
- "Counter": "0,1,2,3",
"EventCode": "0x3a",
"EventName": "UNC_Q_RxL_STALLS_VN1.BGF_NCS",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of stalls trying to send to R3QPI on Virtual Network 1.; Stalled a packet from the NDR message class because there were not enough BGF credits. In bypass mode, we will stall on the packet boundary, while in RxQ mode we will stall on the flit boundary.",
"UMask": "0x4",
@@ -1146,10 +1149,8 @@
},
{
"BriefDescription": "Stalls Sending to R3QPI on VN1; BGF Stall - NCS",
- "Counter": "0,1,2,3",
"EventCode": "0x3a",
"EventName": "UNC_Q_RxL_STALLS_VN1.BGF_NDR",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of stalls trying to send to R3QPI on Virtual Network 1.; Stalled a packet from the NCS message class because there were not enough BGF credits. In bypass mode, we will stall on the packet boundary, while in RxQ mode we will stall on the flit boundary.",
"UMask": "0x20",
@@ -1157,10 +1158,8 @@
},
{
"BriefDescription": "Stalls Sending to R3QPI on VN1; BGF Stall - NCB",
- "Counter": "0,1,2,3",
"EventCode": "0x3a",
"EventName": "UNC_Q_RxL_STALLS_VN1.BGF_SNP",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of stalls trying to send to R3QPI on Virtual Network 1.; Stalled a packet from the NCB message class because there were not enough BGF credits. In bypass mode, we will stall on the packet boundary, while in RxQ mode we will stall on the flit boundary.",
"UMask": "0x10",
@@ -1168,7 +1167,6 @@
},
{
"BriefDescription": "Cycles in L0p",
- "Counter": "0,1,2,3",
"EventCode": "0xd",
"EventName": "UNC_Q_TxL0P_POWER_CYCLES",
"PerPkg": "1",
@@ -1177,7 +1175,6 @@
},
{
"BriefDescription": "Cycles in L0",
- "Counter": "0,1,2,3",
"EventCode": "0xc",
"EventName": "UNC_Q_TxL0_POWER_CYCLES",
"PerPkg": "1",
@@ -1186,7 +1183,6 @@
},
{
"BriefDescription": "Tx Flit Buffer Bypassed",
- "Counter": "0,1,2,3",
"EventCode": "0x5",
"EventName": "UNC_Q_TxL_BYPASSED",
"PerPkg": "1",
@@ -1195,7 +1191,6 @@
},
{
"BriefDescription": "Cycles Stalled with no LLR Credits; LLR is almost full",
- "Counter": "0,1,2,3",
"EventCode": "0x2",
"EventName": "UNC_Q_TxL_CRC_NO_CREDITS.ALMOST_FULL",
"PerPkg": "1",
@@ -1205,7 +1200,6 @@
},
{
"BriefDescription": "Cycles Stalled with no LLR Credits; LLR is full",
- "Counter": "0,1,2,3",
"EventCode": "0x2",
"EventName": "UNC_Q_TxL_CRC_NO_CREDITS.FULL",
"PerPkg": "1",
@@ -1215,7 +1209,6 @@
},
{
"BriefDescription": "Tx Flit Buffer Cycles not Empty",
- "Counter": "0,1,2,3",
"EventCode": "0x6",
"EventName": "UNC_Q_TxL_CYCLES_NE",
"PerPkg": "1",
@@ -1224,7 +1217,6 @@
},
{
"BriefDescription": "Flits Transferred - Group 0; Data Tx Flits",
- "Counter": "0,1,2,3",
"EventName": "UNC_Q_TxL_FLITS_G0.DATA",
"PerPkg": "1",
"PublicDescription": "Counts the number of flits transmitted across the QPI Link. It includes filters for Idle, protocol, and Data Flits. Each flit is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits. Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as data bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information. To calculate data bandwidth, one should therefore do: data flits * 8B / time (for L0) or 4B instead of 8B for L0p.; Number of data flits transmitted over QPI. Each flit contains 64b of data. This includes both DRS and NCB data flits (coherent and non-coherent). This can be used to calculate the data bandwidth of the QPI link. One can get a good picture of the QPI-link characteristics by evaluating the protocol flits, data flits, and idle/null flits. This does not include the header flits that go in data packets.",
@@ -1233,7 +1225,6 @@
},
{
"BriefDescription": "Flits Transferred - Group 0; Non-Data protocol Tx Flits",
- "Counter": "0,1,2,3",
"EventName": "UNC_Q_TxL_FLITS_G0.NON_DATA",
"PerPkg": "1",
"PublicDescription": "Counts the number of flits transmitted across the QPI Link. It includes filters for Idle, protocol, and Data Flits. Each flit is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits. Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as data bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information. To calculate data bandwidth, one should therefore do: data flits * 8B / time (for L0) or 4B instead of 8B for L0p.; Number of non-NULL non-data flits transmitted across QPI. This basically tracks the protocol overhead on the QPI link. One can get a good picture of the QPI-link characteristics by evaluating the protocol flits, data flits, and idle/null flits. This includes the header flits for data packets.",
@@ -1242,9 +1233,7 @@
},
{
"BriefDescription": "Flits Transferred - Group 1; DRS Flits (both Header and Data)",
- "Counter": "0,1,2,3",
"EventName": "UNC_Q_TxL_FLITS_G1.DRS",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of flits transmitted across the QPI Link. This is one of three groups that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each flit is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits. Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as data bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information. To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the total number of flits transmitted over QPI on the DRS (Data Response) channel. DRS flits are used to transmit data with coherency.",
"UMask": "0x18",
@@ -1252,9 +1241,7 @@
},
{
"BriefDescription": "Flits Transferred - Group 1; DRS Data Flits",
- "Counter": "0,1,2,3",
"EventName": "UNC_Q_TxL_FLITS_G1.DRS_DATA",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of flits transmitted across the QPI Link. This is one of three groups that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each flit is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits. Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as data bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information. To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the total number of data flits transmitted over QPI on the DRS (Data Response) channel. DRS flits are used to transmit data with coherency. This does not count data flits transmitted over the NCB channel which transmits non-coherent data. This includes only the data flits (not the header).",
"UMask": "0x8",
@@ -1262,9 +1249,7 @@
},
{
"BriefDescription": "Flits Transferred - Group 1; DRS Header Flits",
- "Counter": "0,1,2,3",
"EventName": "UNC_Q_TxL_FLITS_G1.DRS_NONDATA",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of flits transmitted across the QPI Link. This is one of three groups that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each flit is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits. Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as data bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information. To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the total number of protocol flits transmitted over QPI on the DRS (Data Response) channel. DRS flits are used to transmit data with coherency. This does not count data flits transmitted over the NCB channel which transmits non-coherent data. This includes only the header flits (not the data). This includes extended headers.",
"UMask": "0x10",
@@ -1272,9 +1257,7 @@
},
{
"BriefDescription": "Flits Transferred - Group 1; HOM Flits",
- "Counter": "0,1,2,3",
"EventName": "UNC_Q_TxL_FLITS_G1.HOM",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of flits transmitted across the QPI Link. This is one of three groups that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each flit is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits. Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as data bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information. To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the number of flits transmitted over QPI on the home channel.",
"UMask": "0x6",
@@ -1282,9 +1265,7 @@
},
{
"BriefDescription": "Flits Transferred - Group 1; HOM Non-Request Flits",
- "Counter": "0,1,2,3",
"EventName": "UNC_Q_TxL_FLITS_G1.HOM_NONREQ",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of flits transmitted across the QPI Link. This is one of three groups that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each flit is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits. Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as data bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information. To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the number of non-request flits transmitted over QPI on the home channel. These are most commonly snoop responses, and this event can be used as a proxy for that.",
"UMask": "0x4",
@@ -1292,9 +1273,7 @@
},
{
"BriefDescription": "Flits Transferred - Group 1; HOM Request Flits",
- "Counter": "0,1,2,3",
"EventName": "UNC_Q_TxL_FLITS_G1.HOM_REQ",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of flits transmitted across the QPI Link. This is one of three groups that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each flit is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits. Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as data bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information. To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the number of data request transmitted over QPI on the home channel. This basically counts the number of remote memory requests transmitted over QPI. In conjunction with the local read count in the Home Agent, one can calculate the number of LLC Misses.",
"UMask": "0x2",
@@ -1302,9 +1281,7 @@
},
{
"BriefDescription": "Flits Transferred - Group 1; SNP Flits",
- "Counter": "0,1,2,3",
"EventName": "UNC_Q_TxL_FLITS_G1.SNP",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of flits transmitted across the QPI Link. This is one of three groups that allow us to track flits. It includes filters for SNP, HOM, and DRS message classes. Each flit is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits. Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as data bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information. To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the number of snoop request flits transmitted over QPI. These requests are contained in the snoop channel. This does not include snoop responses, which are transmitted on the home channel.",
"UMask": "0x1",
@@ -1312,21 +1289,17 @@
},
{
"BriefDescription": "Flits Transferred - Group 2; Non-Coherent Bypass Tx Flits",
- "Counter": "0,1,2,3",
"EventCode": "0x1",
"EventName": "UNC_Q_TxL_FLITS_G2.NCB",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of flits transmitted across the QPI Link. This is one of three groups that allow us to track flits. It includes filters for NDR, NCB, and NCS message classes. Each flit is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits. Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as data bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information. To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Number of Non-Coherent Bypass flits. These packets are generally used to transmit non-coherent data across QPI.",
- "UMask": "0xC",
+ "UMask": "0xc",
"Unit": "QPI LL"
},
{
"BriefDescription": "Flits Transferred - Group 2; Non-Coherent data Tx Flits",
- "Counter": "0,1,2,3",
"EventCode": "0x1",
"EventName": "UNC_Q_TxL_FLITS_G2.NCB_DATA",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of flits transmitted across the QPI Link. This is one of three groups that allow us to track flits. It includes filters for NDR, NCB, and NCS message classes. Each flit is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits. Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as data bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information. To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Number of Non-Coherent Bypass data flits. These flits are generally used to transmit non-coherent data across QPI. This does not include a count of the DRS (coherent) data flits. This only counts the data flits, not the NCB headers.",
"UMask": "0x4",
@@ -1334,10 +1307,8 @@
},
{
"BriefDescription": "Flits Transferred - Group 2; Non-Coherent non-data Tx Flits",
- "Counter": "0,1,2,3",
"EventCode": "0x1",
"EventName": "UNC_Q_TxL_FLITS_G2.NCB_NONDATA",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of flits transmitted across the QPI Link. This is one of three groups that allow us to track flits. It includes filters for NDR, NCB, and NCS message classes. Each flit is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits. Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as data bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information. To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Number of Non-Coherent Bypass non-data flits. These packets are generally used to transmit non-coherent data across QPI, and the flits counted here are for headers and other non-data flits. This includes extended headers.",
"UMask": "0x8",
@@ -1345,10 +1316,8 @@
},
{
"BriefDescription": "Flits Transferred - Group 2; Non-Coherent standard Tx Flits",
- "Counter": "0,1,2,3",
"EventCode": "0x1",
"EventName": "UNC_Q_TxL_FLITS_G2.NCS",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of flits transmitted across the QPI Link. This is one of three groups that allow us to track flits. It includes filters for NDR, NCB, and NCS message classes. Each flit is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits. Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as data bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information. To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Number of NCS (non-coherent standard) flits transmitted over QPI. This includes extended headers.",
"UMask": "0x10",
@@ -1356,10 +1325,8 @@
},
{
"BriefDescription": "Flits Transferred - Group 2; Non-Data Response Tx Flits - AD",
- "Counter": "0,1,2,3",
"EventCode": "0x1",
"EventName": "UNC_Q_TxL_FLITS_G2.NDR_AD",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of flits transmitted across the QPI Link. This is one of three groups that allow us to track flits. It includes filters for NDR, NCB, and NCS message classes. Each flit is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits. Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as data bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information. To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the total number of flits transmitted over the NDR (Non-Data Response) channel. This channel is used to send a variety of protocol flits including grants and completions. This is only for NDR packets to the local socket which use the AK ring.",
"UMask": "0x1",
@@ -1367,10 +1334,8 @@
},
{
"BriefDescription": "Flits Transferred - Group 2; Non-Data Response Tx Flits - AK",
- "Counter": "0,1,2,3",
"EventCode": "0x1",
"EventName": "UNC_Q_TxL_FLITS_G2.NDR_AK",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of flits transmitted across the QPI Link. This is one of three groups that allow us to track flits. It includes filters for NDR, NCB, and NCS message classes. Each flit is made up of 80 bits of information (in addition to some ECC data). In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data). In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit. When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits. Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed. One can calculate the bandwidth of the link by taking: flits*80b/time. Note that this is not the same as data bandwidth. For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information. To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the total number of flits transmitted over the NDR (Non-Data Response) channel. This channel is used to send a variety of protocol flits including grants and completions. This is only for NDR packets destined for Route-thru to a remote socket.",
"UMask": "0x2",
@@ -1378,7 +1343,6 @@
},
{
"BriefDescription": "Tx Flit Buffer Allocations",
- "Counter": "0,1,2,3",
"EventCode": "0x4",
"EventName": "UNC_Q_TxL_INSERTS",
"PerPkg": "1",
@@ -1387,7 +1351,6 @@
},
{
"BriefDescription": "Tx Flit Buffer Occupancy",
- "Counter": "0,1,2,3",
"EventCode": "0x7",
"EventName": "UNC_Q_TxL_OCCUPANCY",
"PerPkg": "1",
@@ -1396,10 +1359,8 @@
},
{
"BriefDescription": "R3QPI Egress Credit Occupancy - HOM; for VN0",
- "Counter": "0,1,2,3",
"EventCode": "0x26",
"EventName": "UNC_Q_TxR_AD_HOM_CREDIT_ACQUIRED.VN0",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of link layer credits into the R3 (for transactions across the BGF) acquired each cycle. Flow Control FIFO for Home messages on AD.",
"UMask": "0x1",
@@ -1407,10 +1368,8 @@
},
{
"BriefDescription": "R3QPI Egress Credit Occupancy - HOM; for VN1",
- "Counter": "0,1,2,3",
"EventCode": "0x26",
"EventName": "UNC_Q_TxR_AD_HOM_CREDIT_ACQUIRED.VN1",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of link layer credits into the R3 (for transactions across the BGF) acquired each cycle. Flow Control FIFO for Home messages on AD.",
"UMask": "0x2",
@@ -1418,10 +1377,8 @@
},
{
"BriefDescription": "R3QPI Egress Credit Occupancy - AD HOM; for VN0",
- "Counter": "0,1,2,3",
"EventCode": "0x22",
"EventName": "UNC_Q_TxR_AD_HOM_CREDIT_OCCUPANCY.VN0",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Occupancy event that tracks the number of link layer credits into the R3 (for transactions across the BGF) available in each cycle. Flow Control FIFO for HOM messages on AD.",
"UMask": "0x1",
@@ -1429,10 +1386,8 @@
},
{
"BriefDescription": "R3QPI Egress Credit Occupancy - AD HOM; for VN1",
- "Counter": "0,1,2,3",
"EventCode": "0x22",
"EventName": "UNC_Q_TxR_AD_HOM_CREDIT_OCCUPANCY.VN1",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Occupancy event that tracks the number of link layer credits into the R3 (for transactions across the BGF) available in each cycle. Flow Control FIFO for HOM messages on AD.",
"UMask": "0x2",
@@ -1440,10 +1395,8 @@
},
{
"BriefDescription": "R3QPI Egress Credit Occupancy - AD NDR; for VN0",
- "Counter": "0,1,2,3",
"EventCode": "0x28",
"EventName": "UNC_Q_TxR_AD_NDR_CREDIT_ACQUIRED.VN0",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of link layer credits into the R3 (for transactions across the BGF) acquired each cycle. Flow Control FIFO for NDR messages on AD.",
"UMask": "0x1",
@@ -1451,10 +1404,8 @@
},
{
"BriefDescription": "R3QPI Egress Credit Occupancy - AD NDR; for VN1",
- "Counter": "0,1,2,3",
"EventCode": "0x28",
"EventName": "UNC_Q_TxR_AD_NDR_CREDIT_ACQUIRED.VN1",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of link layer credits into the R3 (for transactions across the BGF) acquired each cycle. Flow Control FIFO for NDR messages on AD.",
"UMask": "0x2",
@@ -1462,10 +1413,8 @@
},
{
"BriefDescription": "R3QPI Egress Credit Occupancy - AD NDR; for VN0",
- "Counter": "0,1,2,3",
"EventCode": "0x24",
"EventName": "UNC_Q_TxR_AD_NDR_CREDIT_OCCUPANCY.VN0",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Occupancy event that tracks the number of link layer credits into the R3 (for transactions across the BGF) available in each cycle. Flow Control FIFO for NDR messages on AD.",
"UMask": "0x1",
@@ -1473,10 +1422,8 @@
},
{
"BriefDescription": "R3QPI Egress Credit Occupancy - AD NDR; for VN1",
- "Counter": "0,1,2,3",
"EventCode": "0x24",
"EventName": "UNC_Q_TxR_AD_NDR_CREDIT_OCCUPANCY.VN1",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Occupancy event that tracks the number of link layer credits into the R3 (for transactions across the BGF) available in each cycle. Flow Control FIFO for NDR messages on AD.",
"UMask": "0x2",
@@ -1484,10 +1431,8 @@
},
{
"BriefDescription": "R3QPI Egress Credit Occupancy - SNP; for VN0",
- "Counter": "0,1,2,3",
"EventCode": "0x27",
"EventName": "UNC_Q_TxR_AD_SNP_CREDIT_ACQUIRED.VN0",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of link layer credits into the R3 (for transactions across the BGF) acquired each cycle. Flow Control FIFO for Snoop messages on AD.",
"UMask": "0x1",
@@ -1495,10 +1440,8 @@
},
{
"BriefDescription": "R3QPI Egress Credit Occupancy - SNP; for VN1",
- "Counter": "0,1,2,3",
"EventCode": "0x27",
"EventName": "UNC_Q_TxR_AD_SNP_CREDIT_ACQUIRED.VN1",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of link layer credits into the R3 (for transactions across the BGF) acquired each cycle. Flow Control FIFO for Snoop messages on AD.",
"UMask": "0x2",
@@ -1506,10 +1449,8 @@
},
{
"BriefDescription": "R3QPI Egress Credit Occupancy - AD SNP; for VN0",
- "Counter": "0,1,2,3",
"EventCode": "0x23",
"EventName": "UNC_Q_TxR_AD_SNP_CREDIT_OCCUPANCY.VN0",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Occupancy event that tracks the number of link layer credits into the R3 (for transactions across the BGF) available in each cycle. Flow Control FIFO for Snoop messages on AD.",
"UMask": "0x1",
@@ -1517,10 +1458,8 @@
},
{
"BriefDescription": "R3QPI Egress Credit Occupancy - AD SNP; for VN1",
- "Counter": "0,1,2,3",
"EventCode": "0x23",
"EventName": "UNC_Q_TxR_AD_SNP_CREDIT_OCCUPANCY.VN1",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Occupancy event that tracks the number of link layer credits into the R3 (for transactions across the BGF) available in each cycle. Flow Control FIFO for Snoop messages on AD.",
"UMask": "0x2",
@@ -1528,20 +1467,16 @@
},
{
"BriefDescription": "R3QPI Egress Credit Occupancy - AK NDR",
- "Counter": "0,1,2,3",
"EventCode": "0x29",
"EventName": "UNC_Q_TxR_AK_NDR_CREDIT_ACQUIRED",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of credits into the R3 (for transactions across the BGF) acquired each cycle. Local NDR message class to AK Egress.",
"Unit": "QPI LL"
},
{
"BriefDescription": "R3QPI Egress Credit Occupancy - AK NDR: for VN0",
- "Counter": "0,1,2,3",
"EventCode": "0x29",
"EventName": "UNC_Q_TxR_AK_NDR_CREDIT_ACQUIRED.VN0",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of credits into the R3 (for transactions across the BGF) acquired each cycle. Local NDR message class to AK Egress.",
"UMask": "0x1",
@@ -1549,10 +1484,8 @@
},
{
"BriefDescription": "R3QPI Egress Credit Occupancy - AK NDR: for VN1",
- "Counter": "0,1,2,3",
"EventCode": "0x29",
"EventName": "UNC_Q_TxR_AK_NDR_CREDIT_ACQUIRED.VN1",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of credits into the R3 (for transactions across the BGF) acquired each cycle. Local NDR message class to AK Egress.",
"UMask": "0x2",
@@ -1560,20 +1493,16 @@
},
{
"BriefDescription": "R3QPI Egress Credit Occupancy - AK NDR",
- "Counter": "0,1,2,3",
"EventCode": "0x25",
"EventName": "UNC_Q_TxR_AK_NDR_CREDIT_OCCUPANCY",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Occupancy event that tracks the number of credits into the R3 (for transactions across the BGF) available in each cycle. Local NDR message class to AK Egress.",
"Unit": "QPI LL"
},
{
"BriefDescription": "R3QPI Egress Credit Occupancy - AK NDR: for VN0",
- "Counter": "0,1,2,3",
"EventCode": "0x25",
"EventName": "UNC_Q_TxR_AK_NDR_CREDIT_OCCUPANCY.VN0",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Occupancy event that tracks the number of credits into the R3 (for transactions across the BGF) available in each cycle. Local NDR message class to AK Egress.",
"UMask": "0x1",
@@ -1581,10 +1510,8 @@
},
{
"BriefDescription": "R3QPI Egress Credit Occupancy - AK NDR: for VN1",
- "Counter": "0,1,2,3",
"EventCode": "0x25",
"EventName": "UNC_Q_TxR_AK_NDR_CREDIT_OCCUPANCY.VN1",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Occupancy event that tracks the number of credits into the R3 (for transactions across the BGF) available in each cycle. Local NDR message class to AK Egress.",
"UMask": "0x2",
@@ -1592,10 +1519,8 @@
},
{
"BriefDescription": "R3QPI Egress Credit Occupancy - DRS; for VN0",
- "Counter": "0,1,2,3",
"EventCode": "0x2a",
"EventName": "UNC_Q_TxR_BL_DRS_CREDIT_ACQUIRED.VN0",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of credits into the R3 (for transactions across the BGF) acquired each cycle. DRS message class to BL Egress.",
"UMask": "0x1",
@@ -1603,10 +1528,8 @@
},
{
"BriefDescription": "R3QPI Egress Credit Occupancy - DRS; for VN1",
- "Counter": "0,1,2,3",
"EventCode": "0x2a",
"EventName": "UNC_Q_TxR_BL_DRS_CREDIT_ACQUIRED.VN1",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of credits into the R3 (for transactions across the BGF) acquired each cycle. DRS message class to BL Egress.",
"UMask": "0x2",
@@ -1614,10 +1537,8 @@
},
{
"BriefDescription": "R3QPI Egress Credit Occupancy - DRS; for Shared VN",
- "Counter": "0,1,2,3",
"EventCode": "0x2a",
"EventName": "UNC_Q_TxR_BL_DRS_CREDIT_ACQUIRED.VN_SHR",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of credits into the R3 (for transactions across the BGF) acquired each cycle. DRS message class to BL Egress.",
"UMask": "0x4",
@@ -1625,10 +1546,8 @@
},
{
"BriefDescription": "R3QPI Egress Credit Occupancy - BL DRS; for VN0",
- "Counter": "0,1,2,3",
"EventCode": "0x1f",
"EventName": "UNC_Q_TxR_BL_DRS_CREDIT_OCCUPANCY.VN0",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Occupancy event that tracks the number of credits into the R3 (for transactions across the BGF) available in each cycle. DRS message class to BL Egress.",
"UMask": "0x1",
@@ -1636,10 +1555,8 @@
},
{
"BriefDescription": "R3QPI Egress Credit Occupancy - BL DRS; for VN1",
- "Counter": "0,1,2,3",
"EventCode": "0x1f",
"EventName": "UNC_Q_TxR_BL_DRS_CREDIT_OCCUPANCY.VN1",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Occupancy event that tracks the number of credits into the R3 (for transactions across the BGF) available in each cycle. DRS message class to BL Egress.",
"UMask": "0x2",
@@ -1647,10 +1564,8 @@
},
{
"BriefDescription": "R3QPI Egress Credit Occupancy - BL DRS; for Shared VN",
- "Counter": "0,1,2,3",
"EventCode": "0x1f",
"EventName": "UNC_Q_TxR_BL_DRS_CREDIT_OCCUPANCY.VN_SHR",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Occupancy event that tracks the number of credits into the R3 (for transactions across the BGF) available in each cycle. DRS message class to BL Egress.",
"UMask": "0x4",
@@ -1658,10 +1573,8 @@
},
{
"BriefDescription": "R3QPI Egress Credit Occupancy - NCB; for VN0",
- "Counter": "0,1,2,3",
"EventCode": "0x2b",
"EventName": "UNC_Q_TxR_BL_NCB_CREDIT_ACQUIRED.VN0",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of credits into the R3 (for transactions across the BGF) acquired each cycle. NCB message class to BL Egress.",
"UMask": "0x1",
@@ -1669,10 +1582,8 @@
},
{
"BriefDescription": "R3QPI Egress Credit Occupancy - NCB; for VN1",
- "Counter": "0,1,2,3",
"EventCode": "0x2b",
"EventName": "UNC_Q_TxR_BL_NCB_CREDIT_ACQUIRED.VN1",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of credits into the R3 (for transactions across the BGF) acquired each cycle. NCB message class to BL Egress.",
"UMask": "0x2",
@@ -1680,10 +1591,8 @@
},
{
"BriefDescription": "R3QPI Egress Credit Occupancy - BL NCB; for VN0",
- "Counter": "0,1,2,3",
"EventCode": "0x20",
"EventName": "UNC_Q_TxR_BL_NCB_CREDIT_OCCUPANCY.VN0",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Occupancy event that tracks the number of credits into the R3 (for transactions across the BGF) available in each cycle. NCB message class to BL Egress.",
"UMask": "0x1",
@@ -1691,10 +1600,8 @@
},
{
"BriefDescription": "R3QPI Egress Credit Occupancy - BL NCB; for VN1",
- "Counter": "0,1,2,3",
"EventCode": "0x20",
"EventName": "UNC_Q_TxR_BL_NCB_CREDIT_OCCUPANCY.VN1",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Occupancy event that tracks the number of credits into the R3 (for transactions across the BGF) available in each cycle. NCB message class to BL Egress.",
"UMask": "0x2",
@@ -1702,10 +1609,8 @@
},
{
"BriefDescription": "R3QPI Egress Credit Occupancy - NCS; for VN0",
- "Counter": "0,1,2,3",
"EventCode": "0x2c",
"EventName": "UNC_Q_TxR_BL_NCS_CREDIT_ACQUIRED.VN0",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of credits into the R3 (for transactions across the BGF) acquired each cycle. NCS message class to BL Egress.",
"UMask": "0x1",
@@ -1713,10 +1618,8 @@
},
{
"BriefDescription": "R3QPI Egress Credit Occupancy - NCS; for VN1",
- "Counter": "0,1,2,3",
"EventCode": "0x2c",
"EventName": "UNC_Q_TxR_BL_NCS_CREDIT_ACQUIRED.VN1",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of credits into the R3 (for transactions across the BGF) acquired each cycle. NCS message class to BL Egress.",
"UMask": "0x2",
@@ -1724,10 +1627,8 @@
},
{
"BriefDescription": "R3QPI Egress Credit Occupancy - BL NCS; for VN0",
- "Counter": "0,1,2,3",
"EventCode": "0x21",
"EventName": "UNC_Q_TxR_BL_NCS_CREDIT_OCCUPANCY.VN0",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Occupancy event that tracks the number of credits into the R3 (for transactions across the BGF) available in each cycle. NCS message class to BL Egress.",
"UMask": "0x1",
@@ -1735,10 +1636,8 @@
},
{
"BriefDescription": "R3QPI Egress Credit Occupancy - BL NCS; for VN1",
- "Counter": "0,1,2,3",
"EventCode": "0x21",
"EventName": "UNC_Q_TxR_BL_NCS_CREDIT_OCCUPANCY.VN1",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Occupancy event that tracks the number of credits into the R3 (for transactions across the BGF) available in each cycle. NCS message class to BL Egress.",
"UMask": "0x2",
@@ -1746,20 +1645,16 @@
},
{
"BriefDescription": "VNA Credits Returned",
- "Counter": "0,1,2,3",
"EventCode": "0x1c",
"EventName": "UNC_Q_VNA_CREDIT_RETURNS",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of VNA credits returned.",
"Unit": "QPI LL"
},
{
"BriefDescription": "VNA Credits Pending Return - Occupancy",
- "Counter": "0,1,2,3",
"EventCode": "0x1b",
"EventName": "UNC_Q_VNA_CREDIT_RETURN_OCCUPANCY",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of VNA credits in the Rx side that are waitng to be returned back across the link.",
"Unit": "QPI LL"
diff --git a/tools/perf/pmu-events/arch/x86/ivytown/uncore-memory.json b/tools/perf/pmu-events/arch/x86/ivytown/uncore-memory.json
index ed60ebca35cb..65509342d56a 100644
--- a/tools/perf/pmu-events/arch/x86/ivytown/uncore-memory.json
+++ b/tools/perf/pmu-events/arch/x86/ivytown/uncore-memory.json
@@ -1,7 +1,6 @@
[
{
"BriefDescription": "DRAM Activate Count; Activate due to Write",
- "Counter": "0,1,2,3",
"EventCode": "0x1",
"EventName": "UNC_M_ACT_COUNT.BYP",
"PerPkg": "1",
@@ -11,7 +10,6 @@
},
{
"BriefDescription": "DRAM Activate Count; Activate due to Read",
- "Counter": "0,1,2,3",
"EventCode": "0x1",
"EventName": "UNC_M_ACT_COUNT.RD",
"PerPkg": "1",
@@ -21,7 +19,6 @@
},
{
"BriefDescription": "DRAM Activate Count; Activate due to Write",
- "Counter": "0,1,2,3",
"EventCode": "0x1",
"EventName": "UNC_M_ACT_COUNT.WR",
"PerPkg": "1",
@@ -31,7 +28,6 @@
},
{
"BriefDescription": "ACT command issued by 2 cycle bypass",
- "Counter": "0,1,2,3",
"EventCode": "0xa1",
"EventName": "UNC_M_BYP_CMDS.ACT",
"PerPkg": "1",
@@ -40,7 +36,6 @@
},
{
"BriefDescription": "CAS command issued by 2 cycle bypass",
- "Counter": "0,1,2,3",
"EventCode": "0xa1",
"EventName": "UNC_M_BYP_CMDS.CAS",
"PerPkg": "1",
@@ -49,7 +44,6 @@
},
{
"BriefDescription": "PRE command issued by 2 cycle bypass",
- "Counter": "0,1,2,3",
"EventCode": "0xa1",
"EventName": "UNC_M_BYP_CMDS.PRE",
"PerPkg": "1",
@@ -58,17 +52,15 @@
},
{
"BriefDescription": "DRAM RD_CAS and WR_CAS Commands.; All DRAM WR_CAS (w/ and w/out auto-pre)",
- "Counter": "0,1,2,3",
"EventCode": "0x4",
"EventName": "UNC_M_CAS_COUNT.ALL",
"PerPkg": "1",
"PublicDescription": "DRAM RD_CAS and WR_CAS Commands; Counts the total number of DRAM CAS commands issued on this channel.",
- "UMask": "0xF",
+ "UMask": "0xf",
"Unit": "iMC"
},
{
"BriefDescription": "DRAM RD_CAS and WR_CAS Commands.; All DRAM Reads (RD_CAS + Underfills)",
- "Counter": "0,1,2,3",
"EventCode": "0x4",
"EventName": "UNC_M_CAS_COUNT.RD",
"PerPkg": "1",
@@ -78,7 +70,6 @@
},
{
"BriefDescription": "DRAM RD_CAS and WR_CAS Commands.; All DRAM RD_CAS (w/ and w/out auto-pre)",
- "Counter": "0,1,2,3",
"EventCode": "0x4",
"EventName": "UNC_M_CAS_COUNT.RD_REG",
"PerPkg": "1",
@@ -88,17 +79,14 @@
},
{
"BriefDescription": "DRAM RD_CAS and WR_CAS Commands.; Read CAS issued in RMM",
- "Counter": "0,1,2,3",
"EventCode": "0x4",
"EventName": "UNC_M_CAS_COUNT.RD_RMM",
"PerPkg": "1",
- "PublicDescription": "DRAM RD_CAS and WR_CAS Commands",
"UMask": "0x20",
"Unit": "iMC"
},
{
"BriefDescription": "DRAM RD_CAS and WR_CAS Commands.; Underfill Read Issued",
- "Counter": "0,1,2,3",
"EventCode": "0x4",
"EventName": "UNC_M_CAS_COUNT.RD_UNDERFILL",
"PerPkg": "1",
@@ -108,27 +96,23 @@
},
{
"BriefDescription": "DRAM RD_CAS and WR_CAS Commands.; Read CAS issued in WMM",
- "Counter": "0,1,2,3",
"EventCode": "0x4",
"EventName": "UNC_M_CAS_COUNT.RD_WMM",
"PerPkg": "1",
- "PublicDescription": "DRAM RD_CAS and WR_CAS Commands",
"UMask": "0x10",
"Unit": "iMC"
},
{
"BriefDescription": "DRAM RD_CAS and WR_CAS Commands.; All DRAM WR_CAS (both Modes)",
- "Counter": "0,1,2,3",
"EventCode": "0x4",
"EventName": "UNC_M_CAS_COUNT.WR",
"PerPkg": "1",
"PublicDescription": "DRAM RD_CAS and WR_CAS Commands; Counts the total number of DRAM Write CAS commands issued on this channel.",
- "UMask": "0xC",
+ "UMask": "0xc",
"Unit": "iMC"
},
{
"BriefDescription": "DRAM RD_CAS and WR_CAS Commands.; DRAM WR_CAS (w/ and w/out auto-pre) in Read Major Mode",
- "Counter": "0,1,2,3",
"EventCode": "0x4",
"EventName": "UNC_M_CAS_COUNT.WR_RMM",
"PerPkg": "1",
@@ -138,7 +122,6 @@
},
{
"BriefDescription": "DRAM RD_CAS and WR_CAS Commands.; DRAM WR_CAS (w/ and w/out auto-pre) in Write Major Mode",
- "Counter": "0,1,2,3",
"EventCode": "0x4",
"EventName": "UNC_M_CAS_COUNT.WR_WMM",
"PerPkg": "1",
@@ -148,14 +131,12 @@
},
{
"BriefDescription": "DRAM Clockticks",
- "Counter": "0,1,2,3",
"EventName": "UNC_M_DCLOCKTICKS",
"PerPkg": "1",
"Unit": "iMC"
},
{
"BriefDescription": "DRAM Precharge All Commands",
- "Counter": "0,1,2,3",
"EventCode": "0x6",
"EventName": "UNC_M_DRAM_PRE_ALL",
"PerPkg": "1",
@@ -164,7 +145,6 @@
},
{
"BriefDescription": "Number of DRAM Refreshes Issued",
- "Counter": "0,1,2,3",
"EventCode": "0x5",
"EventName": "UNC_M_DRAM_REFRESH.HIGH",
"PerPkg": "1",
@@ -174,7 +154,6 @@
},
{
"BriefDescription": "Number of DRAM Refreshes Issued",
- "Counter": "0,1,2,3",
"EventCode": "0x5",
"EventName": "UNC_M_DRAM_REFRESH.PANIC",
"PerPkg": "1",
@@ -184,7 +163,6 @@
},
{
"BriefDescription": "ECC Correctable Errors",
- "Counter": "0,1,2,3",
"EventCode": "0x9",
"EventName": "UNC_M_ECC_CORRECTABLE_ERRORS",
"PerPkg": "1",
@@ -193,7 +171,6 @@
},
{
"BriefDescription": "Cycles in a Major Mode; Isoch Major Mode",
- "Counter": "0,1,2,3",
"EventCode": "0x7",
"EventName": "UNC_M_MAJOR_MODES.ISOCH",
"PerPkg": "1",
@@ -203,7 +180,6 @@
},
{
"BriefDescription": "Cycles in a Major Mode; Partial Major Mode",
- "Counter": "0,1,2,3",
"EventCode": "0x7",
"EventName": "UNC_M_MAJOR_MODES.PARTIAL",
"PerPkg": "1",
@@ -213,7 +189,6 @@
},
{
"BriefDescription": "Cycles in a Major Mode; Read Major Mode",
- "Counter": "0,1,2,3",
"EventCode": "0x7",
"EventName": "UNC_M_MAJOR_MODES.READ",
"PerPkg": "1",
@@ -223,7 +198,6 @@
},
{
"BriefDescription": "Cycles in a Major Mode; Write Major Mode",
- "Counter": "0,1,2,3",
"EventCode": "0x7",
"EventName": "UNC_M_MAJOR_MODES.WRITE",
"PerPkg": "1",
@@ -233,7 +207,6 @@
},
{
"BriefDescription": "Channel DLLOFF Cycles",
- "Counter": "0,1,2,3",
"EventCode": "0x84",
"EventName": "UNC_M_POWER_CHANNEL_DLLOFF",
"PerPkg": "1",
@@ -242,7 +215,6 @@
},
{
"BriefDescription": "Channel PPD Cycles",
- "Counter": "0,1,2,3",
"EventCode": "0x85",
"EventName": "UNC_M_POWER_CHANNEL_PPD",
"PerPkg": "1",
@@ -251,7 +223,6 @@
},
{
"BriefDescription": "CKE_ON_CYCLES by Rank; DIMM ID",
- "Counter": "0,1,2,3",
"EventCode": "0x83",
"EventName": "UNC_M_POWER_CKE_CYCLES.RANK0",
"PerPkg": "1",
@@ -261,7 +232,6 @@
},
{
"BriefDescription": "CKE_ON_CYCLES by Rank; DIMM ID",
- "Counter": "0,1,2,3",
"EventCode": "0x83",
"EventName": "UNC_M_POWER_CKE_CYCLES.RANK1",
"PerPkg": "1",
@@ -271,7 +241,6 @@
},
{
"BriefDescription": "CKE_ON_CYCLES by Rank; DIMM ID",
- "Counter": "0,1,2,3",
"EventCode": "0x83",
"EventName": "UNC_M_POWER_CKE_CYCLES.RANK2",
"PerPkg": "1",
@@ -281,7 +250,6 @@
},
{
"BriefDescription": "CKE_ON_CYCLES by Rank; DIMM ID",
- "Counter": "0,1,2,3",
"EventCode": "0x83",
"EventName": "UNC_M_POWER_CKE_CYCLES.RANK3",
"PerPkg": "1",
@@ -291,7 +259,6 @@
},
{
"BriefDescription": "CKE_ON_CYCLES by Rank; DIMM ID",
- "Counter": "0,1,2,3",
"EventCode": "0x83",
"EventName": "UNC_M_POWER_CKE_CYCLES.RANK4",
"PerPkg": "1",
@@ -301,7 +268,6 @@
},
{
"BriefDescription": "CKE_ON_CYCLES by Rank; DIMM ID",
- "Counter": "0,1,2,3",
"EventCode": "0x83",
"EventName": "UNC_M_POWER_CKE_CYCLES.RANK5",
"PerPkg": "1",
@@ -311,7 +277,6 @@
},
{
"BriefDescription": "CKE_ON_CYCLES by Rank; DIMM ID",
- "Counter": "0,1,2,3",
"EventCode": "0x83",
"EventName": "UNC_M_POWER_CKE_CYCLES.RANK6",
"PerPkg": "1",
@@ -321,7 +286,6 @@
},
{
"BriefDescription": "CKE_ON_CYCLES by Rank; DIMM ID",
- "Counter": "0,1,2,3",
"EventCode": "0x83",
"EventName": "UNC_M_POWER_CKE_CYCLES.RANK7",
"PerPkg": "1",
@@ -331,16 +295,20 @@
},
{
"BriefDescription": "Critical Throttle Cycles",
- "Counter": "0,1,2,3",
"EventCode": "0x86",
"EventName": "UNC_M_POWER_CRITICAL_THROTTLE_CYCLES",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles when the iMC is in critical thermal throttling. When this happens, all traffic is blocked. This should be rare unless something bad is going on in the platform. There is no filtering by rank for this event.",
"Unit": "iMC"
},
+ {
+ "EventCode": "0x42",
+ "EventName": "UNC_M_POWER_PCU_THROTTLING",
+ "PerPkg": "1",
+ "Unit": "iMC"
+ },
{
"BriefDescription": "Clock-Enabled Self-Refresh",
- "Counter": "0,1,2,3",
"EventCode": "0x43",
"EventName": "UNC_M_POWER_SELF_REFRESH",
"PerPkg": "1",
@@ -349,7 +317,6 @@
},
{
"BriefDescription": "Throttle Cycles for Rank 0; DIMM ID",
- "Counter": "0,1,2,3",
"EventCode": "0x41",
"EventName": "UNC_M_POWER_THROTTLE_CYCLES.RANK0",
"PerPkg": "1",
@@ -359,7 +326,6 @@
},
{
"BriefDescription": "Throttle Cycles for Rank 0; DIMM ID",
- "Counter": "0,1,2,3",
"EventCode": "0x41",
"EventName": "UNC_M_POWER_THROTTLE_CYCLES.RANK1",
"PerPkg": "1",
@@ -369,7 +335,6 @@
},
{
"BriefDescription": "Throttle Cycles for Rank 0; DIMM ID",
- "Counter": "0,1,2,3",
"EventCode": "0x41",
"EventName": "UNC_M_POWER_THROTTLE_CYCLES.RANK2",
"PerPkg": "1",
@@ -379,7 +344,6 @@
},
{
"BriefDescription": "Throttle Cycles for Rank 0; DIMM ID",
- "Counter": "0,1,2,3",
"EventCode": "0x41",
"EventName": "UNC_M_POWER_THROTTLE_CYCLES.RANK3",
"PerPkg": "1",
@@ -389,7 +353,6 @@
},
{
"BriefDescription": "Throttle Cycles for Rank 0; DIMM ID",
- "Counter": "0,1,2,3",
"EventCode": "0x41",
"EventName": "UNC_M_POWER_THROTTLE_CYCLES.RANK4",
"PerPkg": "1",
@@ -399,7 +362,6 @@
},
{
"BriefDescription": "Throttle Cycles for Rank 0; DIMM ID",
- "Counter": "0,1,2,3",
"EventCode": "0x41",
"EventName": "UNC_M_POWER_THROTTLE_CYCLES.RANK5",
"PerPkg": "1",
@@ -409,7 +371,6 @@
},
{
"BriefDescription": "Throttle Cycles for Rank 0; DIMM ID",
- "Counter": "0,1,2,3",
"EventCode": "0x41",
"EventName": "UNC_M_POWER_THROTTLE_CYCLES.RANK6",
"PerPkg": "1",
@@ -419,7 +380,6 @@
},
{
"BriefDescription": "Throttle Cycles for Rank 0; DIMM ID",
- "Counter": "0,1,2,3",
"EventCode": "0x41",
"EventName": "UNC_M_POWER_THROTTLE_CYCLES.RANK7",
"PerPkg": "1",
@@ -429,7 +389,6 @@
},
{
"BriefDescription": "Read Preemption Count; Read over Read Preemption",
- "Counter": "0,1,2,3",
"EventCode": "0x8",
"EventName": "UNC_M_PREEMPTION.RD_PREEMPT_RD",
"PerPkg": "1",
@@ -439,7 +398,6 @@
},
{
"BriefDescription": "Read Preemption Count; Read over Write Preemption",
- "Counter": "0,1,2,3",
"EventCode": "0x8",
"EventName": "UNC_M_PREEMPTION.RD_PREEMPT_WR",
"PerPkg": "1",
@@ -449,7 +407,6 @@
},
{
"BriefDescription": "DRAM Precharge commands.; Precharge due to bypass",
- "Counter": "0,1,2,3",
"EventCode": "0x2",
"EventName": "UNC_M_PRE_COUNT.BYP",
"PerPkg": "1",
@@ -459,7 +416,6 @@
},
{
"BriefDescription": "DRAM Precharge commands.; Precharge due to timer expiration",
- "Counter": "0,1,2,3",
"EventCode": "0x2",
"EventName": "UNC_M_PRE_COUNT.PAGE_CLOSE",
"PerPkg": "1",
@@ -469,7 +425,6 @@
},
{
"BriefDescription": "DRAM Precharge commands.; Precharges due to page miss",
- "Counter": "0,1,2,3",
"EventCode": "0x2",
"EventName": "UNC_M_PRE_COUNT.PAGE_MISS",
"PerPkg": "1",
@@ -479,7 +434,6 @@
},
{
"BriefDescription": "DRAM Precharge commands.; Precharge due to read",
- "Counter": "0,1,2,3",
"EventCode": "0x2",
"EventName": "UNC_M_PRE_COUNT.RD",
"PerPkg": "1",
@@ -489,7 +443,6 @@
},
{
"BriefDescription": "DRAM Precharge commands.; Precharge due to write",
- "Counter": "0,1,2,3",
"EventCode": "0x2",
"EventName": "UNC_M_PRE_COUNT.WR",
"PerPkg": "1",
@@ -499,7 +452,6 @@
},
{
"BriefDescription": "Read CAS issued with HIGH priority",
- "Counter": "0,1,2,3",
"EventCode": "0xa0",
"EventName": "UNC_M_RD_CAS_PRIO.HIGH",
"PerPkg": "1",
@@ -508,7 +460,6 @@
},
{
"BriefDescription": "Read CAS issued with LOW priority",
- "Counter": "0,1,2,3",
"EventCode": "0xa0",
"EventName": "UNC_M_RD_CAS_PRIO.LOW",
"PerPkg": "1",
@@ -517,7 +468,6 @@
},
{
"BriefDescription": "Read CAS issued with MEDIUM priority",
- "Counter": "0,1,2,3",
"EventCode": "0xa0",
"EventName": "UNC_M_RD_CAS_PRIO.MED",
"PerPkg": "1",
@@ -526,7 +476,6 @@
},
{
"BriefDescription": "Read CAS issued with PANIC NON ISOCH priority (starved)",
- "Counter": "0,1,2,3",
"EventCode": "0xa0",
"EventName": "UNC_M_RD_CAS_PRIO.PANIC",
"PerPkg": "1",
@@ -535,7 +484,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 0; Bank 0",
- "Counter": "0,1,2,3",
"EventCode": "0xb0",
"EventName": "UNC_M_RD_CAS_RANK0.BANK0",
"PerPkg": "1",
@@ -544,7 +492,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 0; Bank 1",
- "Counter": "0,1,2,3",
"EventCode": "0xb0",
"EventName": "UNC_M_RD_CAS_RANK0.BANK1",
"PerPkg": "1",
@@ -553,7 +500,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 0; Bank 2",
- "Counter": "0,1,2,3",
"EventCode": "0xb0",
"EventName": "UNC_M_RD_CAS_RANK0.BANK2",
"PerPkg": "1",
@@ -562,7 +508,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 0; Bank 3",
- "Counter": "0,1,2,3",
"EventCode": "0xb0",
"EventName": "UNC_M_RD_CAS_RANK0.BANK3",
"PerPkg": "1",
@@ -571,7 +516,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 0; Bank 4",
- "Counter": "0,1,2,3",
"EventCode": "0xb0",
"EventName": "UNC_M_RD_CAS_RANK0.BANK4",
"PerPkg": "1",
@@ -580,7 +524,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 0; Bank 5",
- "Counter": "0,1,2,3",
"EventCode": "0xb0",
"EventName": "UNC_M_RD_CAS_RANK0.BANK5",
"PerPkg": "1",
@@ -589,7 +532,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 0; Bank 6",
- "Counter": "0,1,2,3",
"EventCode": "0xb0",
"EventName": "UNC_M_RD_CAS_RANK0.BANK6",
"PerPkg": "1",
@@ -598,7 +540,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 0; Bank 7",
- "Counter": "0,1,2,3",
"EventCode": "0xb0",
"EventName": "UNC_M_RD_CAS_RANK0.BANK7",
"PerPkg": "1",
@@ -607,7 +548,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 1; Bank 0",
- "Counter": "0,1,2,3",
"EventCode": "0xB1",
"EventName": "UNC_M_RD_CAS_RANK1.BANK0",
"PerPkg": "1",
@@ -616,7 +556,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 1; Bank 1",
- "Counter": "0,1,2,3",
"EventCode": "0xB1",
"EventName": "UNC_M_RD_CAS_RANK1.BANK1",
"PerPkg": "1",
@@ -625,7 +564,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 1; Bank 2",
- "Counter": "0,1,2,3",
"EventCode": "0xB1",
"EventName": "UNC_M_RD_CAS_RANK1.BANK2",
"PerPkg": "1",
@@ -634,7 +572,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 1; Bank 3",
- "Counter": "0,1,2,3",
"EventCode": "0xB1",
"EventName": "UNC_M_RD_CAS_RANK1.BANK3",
"PerPkg": "1",
@@ -643,7 +580,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 1; Bank 4",
- "Counter": "0,1,2,3",
"EventCode": "0xB1",
"EventName": "UNC_M_RD_CAS_RANK1.BANK4",
"PerPkg": "1",
@@ -652,7 +588,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 1; Bank 5",
- "Counter": "0,1,2,3",
"EventCode": "0xB1",
"EventName": "UNC_M_RD_CAS_RANK1.BANK5",
"PerPkg": "1",
@@ -661,7 +596,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 1; Bank 6",
- "Counter": "0,1,2,3",
"EventCode": "0xB1",
"EventName": "UNC_M_RD_CAS_RANK1.BANK6",
"PerPkg": "1",
@@ -670,7 +604,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 1; Bank 7",
- "Counter": "0,1,2,3",
"EventCode": "0xB1",
"EventName": "UNC_M_RD_CAS_RANK1.BANK7",
"PerPkg": "1",
@@ -679,7 +612,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 2; Bank 0",
- "Counter": "0,1,2,3",
"EventCode": "0xB2",
"EventName": "UNC_M_RD_CAS_RANK2.BANK0",
"PerPkg": "1",
@@ -688,7 +620,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 2; Bank 1",
- "Counter": "0,1,2,3",
"EventCode": "0xB2",
"EventName": "UNC_M_RD_CAS_RANK2.BANK1",
"PerPkg": "1",
@@ -697,7 +628,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 2; Bank 2",
- "Counter": "0,1,2,3",
"EventCode": "0xB2",
"EventName": "UNC_M_RD_CAS_RANK2.BANK2",
"PerPkg": "1",
@@ -706,7 +636,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 2; Bank 3",
- "Counter": "0,1,2,3",
"EventCode": "0xB2",
"EventName": "UNC_M_RD_CAS_RANK2.BANK3",
"PerPkg": "1",
@@ -715,7 +644,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 2; Bank 4",
- "Counter": "0,1,2,3",
"EventCode": "0xB2",
"EventName": "UNC_M_RD_CAS_RANK2.BANK4",
"PerPkg": "1",
@@ -724,7 +652,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 2; Bank 5",
- "Counter": "0,1,2,3",
"EventCode": "0xB2",
"EventName": "UNC_M_RD_CAS_RANK2.BANK5",
"PerPkg": "1",
@@ -733,7 +660,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 2; Bank 6",
- "Counter": "0,1,2,3",
"EventCode": "0xB2",
"EventName": "UNC_M_RD_CAS_RANK2.BANK6",
"PerPkg": "1",
@@ -742,7 +668,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 2; Bank 7",
- "Counter": "0,1,2,3",
"EventCode": "0xB2",
"EventName": "UNC_M_RD_CAS_RANK2.BANK7",
"PerPkg": "1",
@@ -751,7 +676,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 3; Bank 0",
- "Counter": "0,1,2,3",
"EventCode": "0xB3",
"EventName": "UNC_M_RD_CAS_RANK3.BANK0",
"PerPkg": "1",
@@ -760,7 +684,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 3; Bank 1",
- "Counter": "0,1,2,3",
"EventCode": "0xB3",
"EventName": "UNC_M_RD_CAS_RANK3.BANK1",
"PerPkg": "1",
@@ -769,7 +692,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 3; Bank 2",
- "Counter": "0,1,2,3",
"EventCode": "0xB3",
"EventName": "UNC_M_RD_CAS_RANK3.BANK2",
"PerPkg": "1",
@@ -778,7 +700,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 3; Bank 3",
- "Counter": "0,1,2,3",
"EventCode": "0xB3",
"EventName": "UNC_M_RD_CAS_RANK3.BANK3",
"PerPkg": "1",
@@ -787,7 +708,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 3; Bank 4",
- "Counter": "0,1,2,3",
"EventCode": "0xB3",
"EventName": "UNC_M_RD_CAS_RANK3.BANK4",
"PerPkg": "1",
@@ -796,7 +716,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 3; Bank 5",
- "Counter": "0,1,2,3",
"EventCode": "0xB3",
"EventName": "UNC_M_RD_CAS_RANK3.BANK5",
"PerPkg": "1",
@@ -805,7 +724,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 3; Bank 6",
- "Counter": "0,1,2,3",
"EventCode": "0xB3",
"EventName": "UNC_M_RD_CAS_RANK3.BANK6",
"PerPkg": "1",
@@ -814,7 +732,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 3; Bank 7",
- "Counter": "0,1,2,3",
"EventCode": "0xB3",
"EventName": "UNC_M_RD_CAS_RANK3.BANK7",
"PerPkg": "1",
@@ -823,7 +740,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 4; Bank 0",
- "Counter": "0,1,2,3",
"EventCode": "0xB4",
"EventName": "UNC_M_RD_CAS_RANK4.BANK0",
"PerPkg": "1",
@@ -832,7 +748,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 4; Bank 1",
- "Counter": "0,1,2,3",
"EventCode": "0xB4",
"EventName": "UNC_M_RD_CAS_RANK4.BANK1",
"PerPkg": "1",
@@ -841,7 +756,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 4; Bank 2",
- "Counter": "0,1,2,3",
"EventCode": "0xB4",
"EventName": "UNC_M_RD_CAS_RANK4.BANK2",
"PerPkg": "1",
@@ -850,7 +764,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 4; Bank 3",
- "Counter": "0,1,2,3",
"EventCode": "0xB4",
"EventName": "UNC_M_RD_CAS_RANK4.BANK3",
"PerPkg": "1",
@@ -859,7 +772,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 4; Bank 4",
- "Counter": "0,1,2,3",
"EventCode": "0xB4",
"EventName": "UNC_M_RD_CAS_RANK4.BANK4",
"PerPkg": "1",
@@ -868,7 +780,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 4; Bank 5",
- "Counter": "0,1,2,3",
"EventCode": "0xB4",
"EventName": "UNC_M_RD_CAS_RANK4.BANK5",
"PerPkg": "1",
@@ -877,7 +788,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 4; Bank 6",
- "Counter": "0,1,2,3",
"EventCode": "0xB4",
"EventName": "UNC_M_RD_CAS_RANK4.BANK6",
"PerPkg": "1",
@@ -886,7 +796,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 4; Bank 7",
- "Counter": "0,1,2,3",
"EventCode": "0xB4",
"EventName": "UNC_M_RD_CAS_RANK4.BANK7",
"PerPkg": "1",
@@ -895,7 +804,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 5; Bank 0",
- "Counter": "0,1,2,3",
"EventCode": "0xB5",
"EventName": "UNC_M_RD_CAS_RANK5.BANK0",
"PerPkg": "1",
@@ -904,7 +812,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 5; Bank 1",
- "Counter": "0,1,2,3",
"EventCode": "0xB5",
"EventName": "UNC_M_RD_CAS_RANK5.BANK1",
"PerPkg": "1",
@@ -913,7 +820,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 5; Bank 2",
- "Counter": "0,1,2,3",
"EventCode": "0xB5",
"EventName": "UNC_M_RD_CAS_RANK5.BANK2",
"PerPkg": "1",
@@ -922,7 +828,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 5; Bank 3",
- "Counter": "0,1,2,3",
"EventCode": "0xB5",
"EventName": "UNC_M_RD_CAS_RANK5.BANK3",
"PerPkg": "1",
@@ -931,7 +836,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 5; Bank 4",
- "Counter": "0,1,2,3",
"EventCode": "0xB5",
"EventName": "UNC_M_RD_CAS_RANK5.BANK4",
"PerPkg": "1",
@@ -940,7 +844,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 5; Bank 5",
- "Counter": "0,1,2,3",
"EventCode": "0xB5",
"EventName": "UNC_M_RD_CAS_RANK5.BANK5",
"PerPkg": "1",
@@ -949,7 +852,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 5; Bank 6",
- "Counter": "0,1,2,3",
"EventCode": "0xB5",
"EventName": "UNC_M_RD_CAS_RANK5.BANK6",
"PerPkg": "1",
@@ -958,7 +860,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 5; Bank 7",
- "Counter": "0,1,2,3",
"EventCode": "0xB5",
"EventName": "UNC_M_RD_CAS_RANK5.BANK7",
"PerPkg": "1",
@@ -967,7 +868,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 6; Bank 0",
- "Counter": "0,1,2,3",
"EventCode": "0xB6",
"EventName": "UNC_M_RD_CAS_RANK6.BANK0",
"PerPkg": "1",
@@ -976,7 +876,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 6; Bank 1",
- "Counter": "0,1,2,3",
"EventCode": "0xB6",
"EventName": "UNC_M_RD_CAS_RANK6.BANK1",
"PerPkg": "1",
@@ -985,7 +884,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 6; Bank 2",
- "Counter": "0,1,2,3",
"EventCode": "0xB6",
"EventName": "UNC_M_RD_CAS_RANK6.BANK2",
"PerPkg": "1",
@@ -994,7 +892,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 6; Bank 3",
- "Counter": "0,1,2,3",
"EventCode": "0xB6",
"EventName": "UNC_M_RD_CAS_RANK6.BANK3",
"PerPkg": "1",
@@ -1003,7 +900,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 6; Bank 4",
- "Counter": "0,1,2,3",
"EventCode": "0xB6",
"EventName": "UNC_M_RD_CAS_RANK6.BANK4",
"PerPkg": "1",
@@ -1012,7 +908,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 6; Bank 5",
- "Counter": "0,1,2,3",
"EventCode": "0xB6",
"EventName": "UNC_M_RD_CAS_RANK6.BANK5",
"PerPkg": "1",
@@ -1021,7 +916,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 6; Bank 6",
- "Counter": "0,1,2,3",
"EventCode": "0xB6",
"EventName": "UNC_M_RD_CAS_RANK6.BANK6",
"PerPkg": "1",
@@ -1030,7 +924,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 6; Bank 7",
- "Counter": "0,1,2,3",
"EventCode": "0xB6",
"EventName": "UNC_M_RD_CAS_RANK6.BANK7",
"PerPkg": "1",
@@ -1039,7 +932,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 7; Bank 0",
- "Counter": "0,1,2,3",
"EventCode": "0xB7",
"EventName": "UNC_M_RD_CAS_RANK7.BANK0",
"PerPkg": "1",
@@ -1048,7 +940,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 7; Bank 1",
- "Counter": "0,1,2,3",
"EventCode": "0xB7",
"EventName": "UNC_M_RD_CAS_RANK7.BANK1",
"PerPkg": "1",
@@ -1057,7 +948,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 7; Bank 2",
- "Counter": "0,1,2,3",
"EventCode": "0xB7",
"EventName": "UNC_M_RD_CAS_RANK7.BANK2",
"PerPkg": "1",
@@ -1066,7 +956,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 7; Bank 3",
- "Counter": "0,1,2,3",
"EventCode": "0xB7",
"EventName": "UNC_M_RD_CAS_RANK7.BANK3",
"PerPkg": "1",
@@ -1075,7 +964,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 7; Bank 4",
- "Counter": "0,1,2,3",
"EventCode": "0xB7",
"EventName": "UNC_M_RD_CAS_RANK7.BANK4",
"PerPkg": "1",
@@ -1084,7 +972,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 7; Bank 5",
- "Counter": "0,1,2,3",
"EventCode": "0xB7",
"EventName": "UNC_M_RD_CAS_RANK7.BANK5",
"PerPkg": "1",
@@ -1093,7 +980,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 7; Bank 6",
- "Counter": "0,1,2,3",
"EventCode": "0xB7",
"EventName": "UNC_M_RD_CAS_RANK7.BANK6",
"PerPkg": "1",
@@ -1102,7 +988,6 @@
},
{
"BriefDescription": "RD_CAS Access to Rank 7; Bank 7",
- "Counter": "0,1,2,3",
"EventCode": "0xB7",
"EventName": "UNC_M_RD_CAS_RANK7.BANK7",
"PerPkg": "1",
@@ -1111,7 +996,6 @@
},
{
"BriefDescription": "Read Pending Queue Not Empty",
- "Counter": "0,1,2,3",
"EventCode": "0x11",
"EventName": "UNC_M_RPQ_CYCLES_NE",
"PerPkg": "1",
@@ -1120,7 +1004,6 @@
},
{
"BriefDescription": "Read Pending Queue Allocations",
- "Counter": "0,1,2,3",
"EventCode": "0x10",
"EventName": "UNC_M_RPQ_INSERTS",
"PerPkg": "1",
@@ -1129,7 +1012,6 @@
},
{
"BriefDescription": "VMSE MXB write buffer occupancy",
- "Counter": "0,1,2,3",
"EventCode": "0x91",
"EventName": "UNC_M_VMSE_MXB_WR_OCCUPANCY",
"PerPkg": "1",
@@ -1137,7 +1019,6 @@
},
{
"BriefDescription": "VMSE WR PUSH issued; VMSE write PUSH issued in RMM",
- "Counter": "0,1,2,3",
"EventCode": "0x90",
"EventName": "UNC_M_VMSE_WR_PUSH.RMM",
"PerPkg": "1",
@@ -1146,7 +1027,6 @@
},
{
"BriefDescription": "VMSE WR PUSH issued; VMSE write PUSH issued in WMM",
- "Counter": "0,1,2,3",
"EventCode": "0x90",
"EventName": "UNC_M_VMSE_WR_PUSH.WMM",
"PerPkg": "1",
@@ -1155,7 +1035,6 @@
},
{
"BriefDescription": "Transition from WMM to RMM because of low threshold; Transition from WMM to RMM because of starve counter",
- "Counter": "0,1,2,3",
"EventCode": "0xc0",
"EventName": "UNC_M_WMM_TO_RMM.LOW_THRESH",
"PerPkg": "1",
@@ -1164,7 +1043,6 @@
},
{
"BriefDescription": "Transition from WMM to RMM because of low threshold",
- "Counter": "0,1,2,3",
"EventCode": "0xc0",
"EventName": "UNC_M_WMM_TO_RMM.STARVE",
"PerPkg": "1",
@@ -1173,7 +1051,6 @@
},
{
"BriefDescription": "Transition from WMM to RMM because of low threshold",
- "Counter": "0,1,2,3",
"EventCode": "0xc0",
"EventName": "UNC_M_WMM_TO_RMM.VMSE_RETRY",
"PerPkg": "1",
@@ -1182,7 +1059,6 @@
},
{
"BriefDescription": "Write Pending Queue Full Cycles",
- "Counter": "0,1,2,3",
"EventCode": "0x22",
"EventName": "UNC_M_WPQ_CYCLES_FULL",
"PerPkg": "1",
@@ -1191,7 +1067,6 @@
},
{
"BriefDescription": "Write Pending Queue Not Empty",
- "Counter": "0,1,2,3",
"EventCode": "0x21",
"EventName": "UNC_M_WPQ_CYCLES_NE",
"PerPkg": "1",
@@ -1200,7 +1075,6 @@
},
{
"BriefDescription": "Write Pending Queue Allocations",
- "Counter": "0,1,2,3",
"EventCode": "0x20",
"EventName": "UNC_M_WPQ_INSERTS",
"PerPkg": "1",
@@ -1209,7 +1083,6 @@
},
{
"BriefDescription": "Write Pending Queue CAM Match",
- "Counter": "0,1,2,3",
"EventCode": "0x23",
"EventName": "UNC_M_WPQ_READ_HIT",
"PerPkg": "1",
@@ -1218,7 +1091,6 @@
},
{
"BriefDescription": "Write Pending Queue CAM Match",
- "Counter": "0,1,2,3",
"EventCode": "0x24",
"EventName": "UNC_M_WPQ_WRITE_HIT",
"PerPkg": "1",
@@ -1227,7 +1099,6 @@
},
{
"BriefDescription": "Not getting the requested Major Mode",
- "Counter": "0,1,2,3",
"EventCode": "0xc1",
"EventName": "UNC_M_WRONG_MM",
"PerPkg": "1",
@@ -1235,7 +1106,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 0; Bank 0",
- "Counter": "0,1,2,3",
"EventCode": "0xb8",
"EventName": "UNC_M_WR_CAS_RANK0.BANK0",
"PerPkg": "1",
@@ -1244,7 +1114,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 0; Bank 1",
- "Counter": "0,1,2,3",
"EventCode": "0xb8",
"EventName": "UNC_M_WR_CAS_RANK0.BANK1",
"PerPkg": "1",
@@ -1253,7 +1122,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 0; Bank 2",
- "Counter": "0,1,2,3",
"EventCode": "0xb8",
"EventName": "UNC_M_WR_CAS_RANK0.BANK2",
"PerPkg": "1",
@@ -1262,7 +1130,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 0; Bank 3",
- "Counter": "0,1,2,3",
"EventCode": "0xb8",
"EventName": "UNC_M_WR_CAS_RANK0.BANK3",
"PerPkg": "1",
@@ -1271,7 +1138,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 0; Bank 4",
- "Counter": "0,1,2,3",
"EventCode": "0xb8",
"EventName": "UNC_M_WR_CAS_RANK0.BANK4",
"PerPkg": "1",
@@ -1280,7 +1146,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 0; Bank 5",
- "Counter": "0,1,2,3",
"EventCode": "0xb8",
"EventName": "UNC_M_WR_CAS_RANK0.BANK5",
"PerPkg": "1",
@@ -1289,7 +1154,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 0; Bank 6",
- "Counter": "0,1,2,3",
"EventCode": "0xb8",
"EventName": "UNC_M_WR_CAS_RANK0.BANK6",
"PerPkg": "1",
@@ -1298,7 +1162,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 0; Bank 7",
- "Counter": "0,1,2,3",
"EventCode": "0xb8",
"EventName": "UNC_M_WR_CAS_RANK0.BANK7",
"PerPkg": "1",
@@ -1307,7 +1170,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 1; Bank 0",
- "Counter": "0,1,2,3",
"EventCode": "0xB9",
"EventName": "UNC_M_WR_CAS_RANK1.BANK0",
"PerPkg": "1",
@@ -1316,7 +1178,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 1; Bank 1",
- "Counter": "0,1,2,3",
"EventCode": "0xB9",
"EventName": "UNC_M_WR_CAS_RANK1.BANK1",
"PerPkg": "1",
@@ -1325,7 +1186,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 1; Bank 2",
- "Counter": "0,1,2,3",
"EventCode": "0xB9",
"EventName": "UNC_M_WR_CAS_RANK1.BANK2",
"PerPkg": "1",
@@ -1334,7 +1194,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 1; Bank 3",
- "Counter": "0,1,2,3",
"EventCode": "0xB9",
"EventName": "UNC_M_WR_CAS_RANK1.BANK3",
"PerPkg": "1",
@@ -1343,7 +1202,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 1; Bank 4",
- "Counter": "0,1,2,3",
"EventCode": "0xB9",
"EventName": "UNC_M_WR_CAS_RANK1.BANK4",
"PerPkg": "1",
@@ -1352,7 +1210,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 1; Bank 5",
- "Counter": "0,1,2,3",
"EventCode": "0xB9",
"EventName": "UNC_M_WR_CAS_RANK1.BANK5",
"PerPkg": "1",
@@ -1361,7 +1218,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 1; Bank 6",
- "Counter": "0,1,2,3",
"EventCode": "0xB9",
"EventName": "UNC_M_WR_CAS_RANK1.BANK6",
"PerPkg": "1",
@@ -1370,7 +1226,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 1; Bank 7",
- "Counter": "0,1,2,3",
"EventCode": "0xB9",
"EventName": "UNC_M_WR_CAS_RANK1.BANK7",
"PerPkg": "1",
@@ -1379,7 +1234,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 2; Bank 0",
- "Counter": "0,1,2,3",
"EventCode": "0xBA",
"EventName": "UNC_M_WR_CAS_RANK2.BANK0",
"PerPkg": "1",
@@ -1388,7 +1242,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 2; Bank 1",
- "Counter": "0,1,2,3",
"EventCode": "0xBA",
"EventName": "UNC_M_WR_CAS_RANK2.BANK1",
"PerPkg": "1",
@@ -1397,7 +1250,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 2; Bank 2",
- "Counter": "0,1,2,3",
"EventCode": "0xBA",
"EventName": "UNC_M_WR_CAS_RANK2.BANK2",
"PerPkg": "1",
@@ -1406,7 +1258,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 2; Bank 3",
- "Counter": "0,1,2,3",
"EventCode": "0xBA",
"EventName": "UNC_M_WR_CAS_RANK2.BANK3",
"PerPkg": "1",
@@ -1415,7 +1266,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 2; Bank 4",
- "Counter": "0,1,2,3",
"EventCode": "0xBA",
"EventName": "UNC_M_WR_CAS_RANK2.BANK4",
"PerPkg": "1",
@@ -1424,7 +1274,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 2; Bank 5",
- "Counter": "0,1,2,3",
"EventCode": "0xBA",
"EventName": "UNC_M_WR_CAS_RANK2.BANK5",
"PerPkg": "1",
@@ -1433,7 +1282,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 2; Bank 6",
- "Counter": "0,1,2,3",
"EventCode": "0xBA",
"EventName": "UNC_M_WR_CAS_RANK2.BANK6",
"PerPkg": "1",
@@ -1442,7 +1290,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 2; Bank 7",
- "Counter": "0,1,2,3",
"EventCode": "0xBA",
"EventName": "UNC_M_WR_CAS_RANK2.BANK7",
"PerPkg": "1",
@@ -1451,7 +1298,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 3; Bank 0",
- "Counter": "0,1,2,3",
"EventCode": "0xBB",
"EventName": "UNC_M_WR_CAS_RANK3.BANK0",
"PerPkg": "1",
@@ -1460,7 +1306,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 3; Bank 1",
- "Counter": "0,1,2,3",
"EventCode": "0xBB",
"EventName": "UNC_M_WR_CAS_RANK3.BANK1",
"PerPkg": "1",
@@ -1469,7 +1314,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 3; Bank 2",
- "Counter": "0,1,2,3",
"EventCode": "0xBB",
"EventName": "UNC_M_WR_CAS_RANK3.BANK2",
"PerPkg": "1",
@@ -1478,7 +1322,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 3; Bank 3",
- "Counter": "0,1,2,3",
"EventCode": "0xBB",
"EventName": "UNC_M_WR_CAS_RANK3.BANK3",
"PerPkg": "1",
@@ -1487,7 +1330,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 3; Bank 4",
- "Counter": "0,1,2,3",
"EventCode": "0xBB",
"EventName": "UNC_M_WR_CAS_RANK3.BANK4",
"PerPkg": "1",
@@ -1496,7 +1338,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 3; Bank 5",
- "Counter": "0,1,2,3",
"EventCode": "0xBB",
"EventName": "UNC_M_WR_CAS_RANK3.BANK5",
"PerPkg": "1",
@@ -1505,7 +1346,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 3; Bank 6",
- "Counter": "0,1,2,3",
"EventCode": "0xBB",
"EventName": "UNC_M_WR_CAS_RANK3.BANK6",
"PerPkg": "1",
@@ -1514,7 +1354,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 3; Bank 7",
- "Counter": "0,1,2,3",
"EventCode": "0xBB",
"EventName": "UNC_M_WR_CAS_RANK3.BANK7",
"PerPkg": "1",
@@ -1523,7 +1362,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 4; Bank 0",
- "Counter": "0,1,2,3",
"EventCode": "0xBC",
"EventName": "UNC_M_WR_CAS_RANK4.BANK0",
"PerPkg": "1",
@@ -1532,7 +1370,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 4; Bank 1",
- "Counter": "0,1,2,3",
"EventCode": "0xBC",
"EventName": "UNC_M_WR_CAS_RANK4.BANK1",
"PerPkg": "1",
@@ -1541,7 +1378,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 4; Bank 2",
- "Counter": "0,1,2,3",
"EventCode": "0xBC",
"EventName": "UNC_M_WR_CAS_RANK4.BANK2",
"PerPkg": "1",
@@ -1550,7 +1386,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 4; Bank 3",
- "Counter": "0,1,2,3",
"EventCode": "0xBC",
"EventName": "UNC_M_WR_CAS_RANK4.BANK3",
"PerPkg": "1",
@@ -1559,7 +1394,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 4; Bank 4",
- "Counter": "0,1,2,3",
"EventCode": "0xBC",
"EventName": "UNC_M_WR_CAS_RANK4.BANK4",
"PerPkg": "1",
@@ -1568,7 +1402,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 4; Bank 5",
- "Counter": "0,1,2,3",
"EventCode": "0xBC",
"EventName": "UNC_M_WR_CAS_RANK4.BANK5",
"PerPkg": "1",
@@ -1577,7 +1410,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 4; Bank 6",
- "Counter": "0,1,2,3",
"EventCode": "0xBC",
"EventName": "UNC_M_WR_CAS_RANK4.BANK6",
"PerPkg": "1",
@@ -1586,7 +1418,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 4; Bank 7",
- "Counter": "0,1,2,3",
"EventCode": "0xBC",
"EventName": "UNC_M_WR_CAS_RANK4.BANK7",
"PerPkg": "1",
@@ -1595,7 +1426,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 5; Bank 0",
- "Counter": "0,1,2,3",
"EventCode": "0xBD",
"EventName": "UNC_M_WR_CAS_RANK5.BANK0",
"PerPkg": "1",
@@ -1604,7 +1434,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 5; Bank 1",
- "Counter": "0,1,2,3",
"EventCode": "0xBD",
"EventName": "UNC_M_WR_CAS_RANK5.BANK1",
"PerPkg": "1",
@@ -1613,7 +1442,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 5; Bank 2",
- "Counter": "0,1,2,3",
"EventCode": "0xBD",
"EventName": "UNC_M_WR_CAS_RANK5.BANK2",
"PerPkg": "1",
@@ -1622,7 +1450,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 5; Bank 3",
- "Counter": "0,1,2,3",
"EventCode": "0xBD",
"EventName": "UNC_M_WR_CAS_RANK5.BANK3",
"PerPkg": "1",
@@ -1631,7 +1458,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 5; Bank 4",
- "Counter": "0,1,2,3",
"EventCode": "0xBD",
"EventName": "UNC_M_WR_CAS_RANK5.BANK4",
"PerPkg": "1",
@@ -1640,7 +1466,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 5; Bank 5",
- "Counter": "0,1,2,3",
"EventCode": "0xBD",
"EventName": "UNC_M_WR_CAS_RANK5.BANK5",
"PerPkg": "1",
@@ -1649,7 +1474,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 5; Bank 6",
- "Counter": "0,1,2,3",
"EventCode": "0xBD",
"EventName": "UNC_M_WR_CAS_RANK5.BANK6",
"PerPkg": "1",
@@ -1658,7 +1482,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 5; Bank 7",
- "Counter": "0,1,2,3",
"EventCode": "0xBD",
"EventName": "UNC_M_WR_CAS_RANK5.BANK7",
"PerPkg": "1",
@@ -1667,7 +1490,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 6; Bank 0",
- "Counter": "0,1,2,3",
"EventCode": "0xBE",
"EventName": "UNC_M_WR_CAS_RANK6.BANK0",
"PerPkg": "1",
@@ -1676,7 +1498,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 6; Bank 1",
- "Counter": "0,1,2,3",
"EventCode": "0xBE",
"EventName": "UNC_M_WR_CAS_RANK6.BANK1",
"PerPkg": "1",
@@ -1685,7 +1506,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 6; Bank 2",
- "Counter": "0,1,2,3",
"EventCode": "0xBE",
"EventName": "UNC_M_WR_CAS_RANK6.BANK2",
"PerPkg": "1",
@@ -1694,7 +1514,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 6; Bank 3",
- "Counter": "0,1,2,3",
"EventCode": "0xBE",
"EventName": "UNC_M_WR_CAS_RANK6.BANK3",
"PerPkg": "1",
@@ -1703,7 +1522,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 6; Bank 4",
- "Counter": "0,1,2,3",
"EventCode": "0xBE",
"EventName": "UNC_M_WR_CAS_RANK6.BANK4",
"PerPkg": "1",
@@ -1712,7 +1530,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 6; Bank 5",
- "Counter": "0,1,2,3",
"EventCode": "0xBE",
"EventName": "UNC_M_WR_CAS_RANK6.BANK5",
"PerPkg": "1",
@@ -1721,7 +1538,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 6; Bank 6",
- "Counter": "0,1,2,3",
"EventCode": "0xBE",
"EventName": "UNC_M_WR_CAS_RANK6.BANK6",
"PerPkg": "1",
@@ -1730,7 +1546,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 6; Bank 7",
- "Counter": "0,1,2,3",
"EventCode": "0xBE",
"EventName": "UNC_M_WR_CAS_RANK6.BANK7",
"PerPkg": "1",
@@ -1739,7 +1554,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 7; Bank 0",
- "Counter": "0,1,2,3",
"EventCode": "0xBF",
"EventName": "UNC_M_WR_CAS_RANK7.BANK0",
"PerPkg": "1",
@@ -1748,7 +1562,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 7; Bank 1",
- "Counter": "0,1,2,3",
"EventCode": "0xBF",
"EventName": "UNC_M_WR_CAS_RANK7.BANK1",
"PerPkg": "1",
@@ -1757,7 +1570,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 7; Bank 2",
- "Counter": "0,1,2,3",
"EventCode": "0xBF",
"EventName": "UNC_M_WR_CAS_RANK7.BANK2",
"PerPkg": "1",
@@ -1766,7 +1578,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 7; Bank 3",
- "Counter": "0,1,2,3",
"EventCode": "0xBF",
"EventName": "UNC_M_WR_CAS_RANK7.BANK3",
"PerPkg": "1",
@@ -1775,7 +1586,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 7; Bank 4",
- "Counter": "0,1,2,3",
"EventCode": "0xBF",
"EventName": "UNC_M_WR_CAS_RANK7.BANK4",
"PerPkg": "1",
@@ -1784,7 +1594,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 7; Bank 5",
- "Counter": "0,1,2,3",
"EventCode": "0xBF",
"EventName": "UNC_M_WR_CAS_RANK7.BANK5",
"PerPkg": "1",
@@ -1793,7 +1602,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 7; Bank 6",
- "Counter": "0,1,2,3",
"EventCode": "0xBF",
"EventName": "UNC_M_WR_CAS_RANK7.BANK6",
"PerPkg": "1",
@@ -1802,7 +1610,6 @@
},
{
"BriefDescription": "WR_CAS Access to Rank 7; Bank 7",
- "Counter": "0,1,2,3",
"EventCode": "0xBF",
"EventName": "UNC_M_WR_CAS_RANK7.BANK7",
"PerPkg": "1",
diff --git a/tools/perf/pmu-events/arch/x86/ivytown/uncore-other.json b/tools/perf/pmu-events/arch/x86/ivytown/uncore-other.json
index 6c7ddf642fc3..af9d14a6d145 100644
--- a/tools/perf/pmu-events/arch/x86/ivytown/uncore-other.json
+++ b/tools/perf/pmu-events/arch/x86/ivytown/uncore-other.json
@@ -1,7 +1,6 @@
[
{
"BriefDescription": "Address Match (Conflict) Count; Conflict Merges",
- "Counter": "0,1",
"EventCode": "0x17",
"EventName": "UNC_I_ADDRESS_MATCH.MERGE_COUNT",
"PerPkg": "1",
@@ -11,7 +10,6 @@
},
{
"BriefDescription": "Address Match (Conflict) Count; Conflict Stalls",
- "Counter": "0,1",
"EventCode": "0x17",
"EventName": "UNC_I_ADDRESS_MATCH.STALL_COUNT",
"PerPkg": "1",
@@ -21,7 +19,6 @@
},
{
"BriefDescription": "Write Ack Pending Occupancy; Any Source",
- "Counter": "0,1",
"EventCode": "0x14",
"EventName": "UNC_I_CACHE_ACK_PENDING_OCCUPANCY.ANY",
"PerPkg": "1",
@@ -31,7 +28,6 @@
},
{
"BriefDescription": "Write Ack Pending Occupancy; Select Source",
- "Counter": "0,1",
"EventCode": "0x14",
"EventName": "UNC_I_CACHE_ACK_PENDING_OCCUPANCY.SOURCE",
"PerPkg": "1",
@@ -41,7 +37,6 @@
},
{
"BriefDescription": "Outstanding Write Ownership Occupancy; Any Source",
- "Counter": "0,1",
"EventCode": "0x13",
"EventName": "UNC_I_CACHE_OWN_OCCUPANCY.ANY",
"PerPkg": "1",
@@ -51,7 +46,6 @@
},
{
"BriefDescription": "Outstanding Write Ownership Occupancy; Select Source",
- "Counter": "0,1",
"EventCode": "0x13",
"EventName": "UNC_I_CACHE_OWN_OCCUPANCY.SOURCE",
"PerPkg": "1",
@@ -61,7 +55,6 @@
},
{
"BriefDescription": "Outstanding Read Occupancy; Any Source",
- "Counter": "0,1",
"EventCode": "0x10",
"EventName": "UNC_I_CACHE_READ_OCCUPANCY.ANY",
"PerPkg": "1",
@@ -71,7 +64,6 @@
},
{
"BriefDescription": "Outstanding Read Occupancy; Select Source",
- "Counter": "0,1",
"EventCode": "0x10",
"EventName": "UNC_I_CACHE_READ_OCCUPANCY.SOURCE",
"PerPkg": "1",
@@ -81,7 +73,6 @@
},
{
"BriefDescription": "Total Write Cache Occupancy; Any Source",
- "Counter": "0,1",
"EventCode": "0x12",
"EventName": "UNC_I_CACHE_TOTAL_OCCUPANCY.ANY",
"PerPkg": "1",
@@ -91,7 +82,6 @@
},
{
"BriefDescription": "Total Write Cache Occupancy; Select Source",
- "Counter": "0,1",
"EventCode": "0x12",
"EventName": "UNC_I_CACHE_TOTAL_OCCUPANCY.SOURCE",
"PerPkg": "1",
@@ -101,7 +91,6 @@
},
{
"BriefDescription": "Outstanding Write Occupancy; Any Source",
- "Counter": "0,1",
"EventCode": "0x11",
"EventName": "UNC_I_CACHE_WRITE_OCCUPANCY.ANY",
"PerPkg": "1",
@@ -111,7 +100,6 @@
},
{
"BriefDescription": "Outstanding Write Occupancy; Select Source",
- "Counter": "0,1",
"EventCode": "0x11",
"EventName": "UNC_I_CACHE_WRITE_OCCUPANCY.SOURCE",
"PerPkg": "1",
@@ -121,14 +109,12 @@
},
{
"BriefDescription": "Clocks in the IRP",
- "Counter": "0,1",
"EventName": "UNC_I_CLOCKTICKS",
"PerPkg": "1",
"PublicDescription": "Number of clocks in the IRP.",
"Unit": "IRP"
},
{
- "Counter": "0,1",
"EventCode": "0xb",
"EventName": "UNC_I_RxR_AK_CYCLES_FULL",
"PerPkg": "1",
@@ -137,7 +123,6 @@
},
{
"BriefDescription": "AK Ingress Occupancy",
- "Counter": "0,1",
"EventCode": "0xa",
"EventName": "UNC_I_RxR_AK_INSERTS",
"PerPkg": "1",
@@ -145,7 +130,6 @@
"Unit": "IRP"
},
{
- "Counter": "0,1",
"EventCode": "0xc",
"EventName": "UNC_I_RxR_AK_OCCUPANCY",
"PerPkg": "1",
@@ -153,7 +137,6 @@
"Unit": "IRP"
},
{
- "Counter": "0,1",
"EventCode": "0x4",
"EventName": "UNC_I_RxR_BL_DRS_CYCLES_FULL",
"PerPkg": "1",
@@ -162,7 +145,6 @@
},
{
"BriefDescription": "BL Ingress Occupancy - DRS",
- "Counter": "0,1",
"EventCode": "0x1",
"EventName": "UNC_I_RxR_BL_DRS_INSERTS",
"PerPkg": "1",
@@ -170,7 +152,6 @@
"Unit": "IRP"
},
{
- "Counter": "0,1",
"EventCode": "0x7",
"EventName": "UNC_I_RxR_BL_DRS_OCCUPANCY",
"PerPkg": "1",
@@ -178,7 +159,6 @@
"Unit": "IRP"
},
{
- "Counter": "0,1",
"EventCode": "0x5",
"EventName": "UNC_I_RxR_BL_NCB_CYCLES_FULL",
"PerPkg": "1",
@@ -187,7 +167,6 @@
},
{
"BriefDescription": "BL Ingress Occupancy - NCB",
- "Counter": "0,1",
"EventCode": "0x2",
"EventName": "UNC_I_RxR_BL_NCB_INSERTS",
"PerPkg": "1",
@@ -195,7 +174,6 @@
"Unit": "IRP"
},
{
- "Counter": "0,1",
"EventCode": "0x8",
"EventName": "UNC_I_RxR_BL_NCB_OCCUPANCY",
"PerPkg": "1",
@@ -203,7 +181,6 @@
"Unit": "IRP"
},
{
- "Counter": "0,1",
"EventCode": "0x6",
"EventName": "UNC_I_RxR_BL_NCS_CYCLES_FULL",
"PerPkg": "1",
@@ -212,7 +189,6 @@
},
{
"BriefDescription": "BL Ingress Occupancy - NCS",
- "Counter": "0,1",
"EventCode": "0x3",
"EventName": "UNC_I_RxR_BL_NCS_INSERTS",
"PerPkg": "1",
@@ -220,7 +196,6 @@
"Unit": "IRP"
},
{
- "Counter": "0,1",
"EventCode": "0x9",
"EventName": "UNC_I_RxR_BL_NCS_OCCUPANCY",
"PerPkg": "1",
@@ -229,7 +204,6 @@
},
{
"BriefDescription": "Tickle Count; Ownership Lost",
- "Counter": "0,1",
"EventCode": "0x16",
"EventName": "UNC_I_TICKLES.LOST_OWNERSHIP",
"PerPkg": "1",
@@ -239,7 +213,6 @@
},
{
"BriefDescription": "Tickle Count; Data Returned",
- "Counter": "0,1",
"EventCode": "0x16",
"EventName": "UNC_I_TICKLES.TOP_OF_QUEUE",
"PerPkg": "1",
@@ -249,7 +222,6 @@
},
{
"BriefDescription": "Inbound Transaction Count: Read Prefetches",
- "Counter": "0,1",
"EventCode": "0x15",
"EventName": "UNC_I_TRANSACTIONS.PD_PREFETCHES",
"PerPkg": "1",
@@ -259,7 +231,6 @@
},
{
"BriefDescription": "Inbound Transaction Count; Read Prefetches",
- "Counter": "0,1",
"EventCode": "0x15",
"EventName": "UNC_I_TRANSACTIONS.RD_PREFETCHES",
"PerPkg": "1",
@@ -269,7 +240,6 @@
},
{
"BriefDescription": "Inbound Transaction Count; Reads",
- "Counter": "0,1",
"EventCode": "0x15",
"EventName": "UNC_I_TRANSACTIONS.READS",
"PerPkg": "1",
@@ -279,7 +249,6 @@
},
{
"BriefDescription": "Inbound Transaction Count; Writes",
- "Counter": "0,1",
"EventCode": "0x15",
"EventName": "UNC_I_TRANSACTIONS.WRITES",
"PerPkg": "1",
@@ -289,7 +258,6 @@
},
{
"BriefDescription": "No AD Egress Credit Stalls",
- "Counter": "0,1",
"EventCode": "0x18",
"EventName": "UNC_I_TxR_AD_STALL_CREDIT_CYCLES",
"PerPkg": "1",
@@ -298,7 +266,6 @@
},
{
"BriefDescription": "No BL Egress Credit Stalls",
- "Counter": "0,1",
"EventCode": "0x19",
"EventName": "UNC_I_TxR_BL_STALL_CREDIT_CYCLES",
"PerPkg": "1",
@@ -307,7 +274,6 @@
},
{
"BriefDescription": "Outbound Read Requests",
- "Counter": "0,1",
"EventCode": "0xe",
"EventName": "UNC_I_TxR_DATA_INSERTS_NCB",
"PerPkg": "1",
@@ -316,7 +282,6 @@
},
{
"BriefDescription": "Outbound Read Requests",
- "Counter": "0,1",
"EventCode": "0xf",
"EventName": "UNC_I_TxR_DATA_INSERTS_NCS",
"PerPkg": "1",
@@ -325,7 +290,6 @@
},
{
"BriefDescription": "Outbound Request Queue Occupancy",
- "Counter": "0,1",
"EventCode": "0xd",
"EventName": "UNC_I_TxR_REQUEST_OCCUPANCY",
"PerPkg": "1",
@@ -334,7 +298,6 @@
},
{
"BriefDescription": "Write Ordering Stalls",
- "Counter": "0,1",
"EventCode": "0x1a",
"EventName": "UNC_I_WRITE_ORDERING_STALL_CYCLES",
"PerPkg": "1",
@@ -343,7 +306,6 @@
},
{
"BriefDescription": "Number of uclks in domain",
- "Counter": "0,1,2,3",
"EventCode": "0x1",
"EventName": "UNC_R2_CLOCKTICKS",
"PerPkg": "1",
@@ -352,7 +314,6 @@
},
{
"BriefDescription": "R2PCIe IIO Credit Acquired; DRS",
- "Counter": "0,1",
"EventCode": "0x33",
"EventName": "UNC_R2_IIO_CREDITS_ACQUIRED.DRS",
"PerPkg": "1",
@@ -362,7 +323,6 @@
},
{
"BriefDescription": "R2PCIe IIO Credit Acquired; NCB",
- "Counter": "0,1",
"EventCode": "0x33",
"EventName": "UNC_R2_IIO_CREDITS_ACQUIRED.NCB",
"PerPkg": "1",
@@ -372,7 +332,6 @@
},
{
"BriefDescription": "R2PCIe IIO Credit Acquired; NCS",
- "Counter": "0,1",
"EventCode": "0x33",
"EventName": "UNC_R2_IIO_CREDITS_ACQUIRED.NCS",
"PerPkg": "1",
@@ -382,7 +341,6 @@
},
{
"BriefDescription": "R2PCIe IIO Failed to Acquire a Credit; DRS",
- "Counter": "0,1",
"EventCode": "0x34",
"EventName": "UNC_R2_IIO_CREDITS_REJECT.DRS",
"PerPkg": "1",
@@ -392,7 +350,6 @@
},
{
"BriefDescription": "R2PCIe IIO Credits in Use; DRS",
- "Counter": "0,1",
"EventCode": "0x32",
"EventName": "UNC_R2_IIO_CREDITS_USED.DRS",
"PerPkg": "1",
@@ -402,7 +359,6 @@
},
{
"BriefDescription": "R2PCIe IIO Credits in Use; NCB",
- "Counter": "0,1",
"EventCode": "0x32",
"EventName": "UNC_R2_IIO_CREDITS_USED.NCB",
"PerPkg": "1",
@@ -412,7 +368,6 @@
},
{
"BriefDescription": "R2PCIe IIO Credits in Use; NCS",
- "Counter": "0,1",
"EventCode": "0x32",
"EventName": "UNC_R2_IIO_CREDITS_USED.NCS",
"PerPkg": "1",
@@ -422,17 +377,15 @@
},
{
"BriefDescription": "R2 AD Ring in Use; Counterclockwise",
- "Counter": "0,1,2,3",
"EventCode": "0x7",
"EventName": "UNC_R2_RING_AD_USED.CCW",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the AD ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop.",
- "UMask": "0xCC",
+ "UMask": "0xcc",
"Unit": "R2PCIe"
},
{
"BriefDescription": "R2 AD Ring in Use; Counterclockwise and Even on VRing 0",
- "Counter": "0,1,2,3",
"EventCode": "0x7",
"EventName": "UNC_R2_RING_AD_USED.CCW_VR0_EVEN",
"PerPkg": "1",
@@ -442,7 +395,6 @@
},
{
"BriefDescription": "R2 AD Ring in Use; Counterclockwise and Odd on VRing 0",
- "Counter": "0,1,2,3",
"EventCode": "0x7",
"EventName": "UNC_R2_RING_AD_USED.CCW_VR0_ODD",
"PerPkg": "1",
@@ -452,7 +404,6 @@
},
{
"BriefDescription": "R2 AD Ring in Use; Counterclockwise and Even on VRing 1",
- "Counter": "0,1,2,3",
"EventCode": "0x7",
"EventName": "UNC_R2_RING_AD_USED.CCW_VR1_EVEN",
"PerPkg": "1",
@@ -462,7 +413,6 @@
},
{
"BriefDescription": "R2 AD Ring in Use; Counterclockwise and Odd on VRing 1",
- "Counter": "0,1,2,3",
"EventCode": "0x7",
"EventName": "UNC_R2_RING_AD_USED.CCW_VR1_ODD",
"PerPkg": "1",
@@ -472,7 +422,6 @@
},
{
"BriefDescription": "R2 AD Ring in Use; Clockwise",
- "Counter": "0,1,2,3",
"EventCode": "0x7",
"EventName": "UNC_R2_RING_AD_USED.CW",
"PerPkg": "1",
@@ -482,7 +431,6 @@
},
{
"BriefDescription": "R2 AD Ring in Use; Clockwise and Even on VRing 0",
- "Counter": "0,1,2,3",
"EventCode": "0x7",
"EventName": "UNC_R2_RING_AD_USED.CW_VR0_EVEN",
"PerPkg": "1",
@@ -492,7 +440,6 @@
},
{
"BriefDescription": "R2 AD Ring in Use; Clockwise and Odd on VRing 0",
- "Counter": "0,1,2,3",
"EventCode": "0x7",
"EventName": "UNC_R2_RING_AD_USED.CW_VR0_ODD",
"PerPkg": "1",
@@ -502,7 +449,6 @@
},
{
"BriefDescription": "R2 AD Ring in Use; Clockwise and Even on VRing 1",
- "Counter": "0,1,2,3",
"EventCode": "0x7",
"EventName": "UNC_R2_RING_AD_USED.CW_VR1_EVEN",
"PerPkg": "1",
@@ -512,7 +458,6 @@
},
{
"BriefDescription": "R2 AD Ring in Use; Clockwise and Odd on VRing 1",
- "Counter": "0,1,2,3",
"EventCode": "0x7",
"EventName": "UNC_R2_RING_AD_USED.CW_VR1_ODD",
"PerPkg": "1",
@@ -522,17 +467,15 @@
},
{
"BriefDescription": "R2 AK Ring in Use; Counterclockwise",
- "Counter": "0,1,2,3",
"EventCode": "0x8",
"EventName": "UNC_R2_RING_AK_USED.CCW",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the AK ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop.",
- "UMask": "0xCC",
+ "UMask": "0xcc",
"Unit": "R2PCIe"
},
{
"BriefDescription": "R2 AK Ring in Use; Counterclockwise and Even on VRing 0",
- "Counter": "0,1,2,3",
"EventCode": "0x8",
"EventName": "UNC_R2_RING_AK_USED.CCW_VR0_EVEN",
"PerPkg": "1",
@@ -542,7 +485,6 @@
},
{
"BriefDescription": "R2 AK Ring in Use; Counterclockwise and Odd on VRing 0",
- "Counter": "0,1,2,3",
"EventCode": "0x8",
"EventName": "UNC_R2_RING_AK_USED.CCW_VR0_ODD",
"PerPkg": "1",
@@ -552,7 +494,6 @@
},
{
"BriefDescription": "R2 AK Ring in Use; Counterclockwise and Even on VRing 1",
- "Counter": "0,1,2,3",
"EventCode": "0x8",
"EventName": "UNC_R2_RING_AK_USED.CCW_VR1_EVEN",
"PerPkg": "1",
@@ -562,7 +503,6 @@
},
{
"BriefDescription": "R2 AK Ring in Use; Counterclockwise and Odd on VRing 1",
- "Counter": "0,1,2,3",
"EventCode": "0x8",
"EventName": "UNC_R2_RING_AK_USED.CCW_VR1_ODD",
"PerPkg": "1",
@@ -572,7 +512,6 @@
},
{
"BriefDescription": "R2 AK Ring in Use; Clockwise",
- "Counter": "0,1,2,3",
"EventCode": "0x8",
"EventName": "UNC_R2_RING_AK_USED.CW",
"PerPkg": "1",
@@ -582,7 +521,6 @@
},
{
"BriefDescription": "R2 AK Ring in Use; Clockwise and Even on VRing 0",
- "Counter": "0,1,2,3",
"EventCode": "0x8",
"EventName": "UNC_R2_RING_AK_USED.CW_VR0_EVEN",
"PerPkg": "1",
@@ -592,7 +530,6 @@
},
{
"BriefDescription": "R2 AK Ring in Use; Clockwise and Odd on VRing 0",
- "Counter": "0,1,2,3",
"EventCode": "0x8",
"EventName": "UNC_R2_RING_AK_USED.CW_VR0_ODD",
"PerPkg": "1",
@@ -602,7 +539,6 @@
},
{
"BriefDescription": "R2 AK Ring in Use; Clockwise and Even on VRing 1",
- "Counter": "0,1,2,3",
"EventCode": "0x8",
"EventName": "UNC_R2_RING_AK_USED.CW_VR1_EVEN",
"PerPkg": "1",
@@ -612,7 +548,6 @@
},
{
"BriefDescription": "R2 AK Ring in Use; Clockwise and Odd on VRing 1",
- "Counter": "0,1,2,3",
"EventCode": "0x8",
"EventName": "UNC_R2_RING_AK_USED.CW_VR1_ODD",
"PerPkg": "1",
@@ -622,17 +557,15 @@
},
{
"BriefDescription": "R2 BL Ring in Use; Counterclockwise",
- "Counter": "0,1,2,3",
"EventCode": "0x9",
"EventName": "UNC_R2_RING_BL_USED.CCW",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the BL ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop.",
- "UMask": "0xCC",
+ "UMask": "0xcc",
"Unit": "R2PCIe"
},
{
"BriefDescription": "R2 BL Ring in Use; Counterclockwise and Even on VRing 0",
- "Counter": "0,1,2,3",
"EventCode": "0x9",
"EventName": "UNC_R2_RING_BL_USED.CCW_VR0_EVEN",
"PerPkg": "1",
@@ -642,7 +575,6 @@
},
{
"BriefDescription": "R2 BL Ring in Use; Counterclockwise and Odd on VRing 0",
- "Counter": "0,1,2,3",
"EventCode": "0x9",
"EventName": "UNC_R2_RING_BL_USED.CCW_VR0_ODD",
"PerPkg": "1",
@@ -652,7 +584,6 @@
},
{
"BriefDescription": "R2 BL Ring in Use; Counterclockwise and Even on VRing 1",
- "Counter": "0,1,2,3",
"EventCode": "0x9",
"EventName": "UNC_R2_RING_BL_USED.CCW_VR1_EVEN",
"PerPkg": "1",
@@ -662,7 +593,6 @@
},
{
"BriefDescription": "R2 BL Ring in Use; Counterclockwise and Odd on VRing 1",
- "Counter": "0,1,2,3",
"EventCode": "0x9",
"EventName": "UNC_R2_RING_BL_USED.CCW_VR1_ODD",
"PerPkg": "1",
@@ -672,7 +602,6 @@
},
{
"BriefDescription": "R2 BL Ring in Use; Clockwise",
- "Counter": "0,1,2,3",
"EventCode": "0x9",
"EventName": "UNC_R2_RING_BL_USED.CW",
"PerPkg": "1",
@@ -682,7 +611,6 @@
},
{
"BriefDescription": "R2 BL Ring in Use; Clockwise and Even on VRing 0",
- "Counter": "0,1,2,3",
"EventCode": "0x9",
"EventName": "UNC_R2_RING_BL_USED.CW_VR0_EVEN",
"PerPkg": "1",
@@ -692,7 +620,6 @@
},
{
"BriefDescription": "R2 BL Ring in Use; Clockwise and Odd on VRing 0",
- "Counter": "0,1,2,3",
"EventCode": "0x9",
"EventName": "UNC_R2_RING_BL_USED.CW_VR0_ODD",
"PerPkg": "1",
@@ -702,7 +629,6 @@
},
{
"BriefDescription": "R2 BL Ring in Use; Clockwise and Even on VRing 1",
- "Counter": "0,1,2,3",
"EventCode": "0x9",
"EventName": "UNC_R2_RING_BL_USED.CW_VR1_EVEN",
"PerPkg": "1",
@@ -712,7 +638,6 @@
},
{
"BriefDescription": "R2 BL Ring in Use; Clockwise and Odd on VRing 1",
- "Counter": "0,1,2,3",
"EventCode": "0x9",
"EventName": "UNC_R2_RING_BL_USED.CW_VR1_ODD",
"PerPkg": "1",
@@ -722,27 +647,24 @@
},
{
"BriefDescription": "R2 IV Ring in Use; Any",
- "Counter": "0,1,2,3",
"EventCode": "0xA",
"EventName": "UNC_R2_RING_IV_USED.ANY",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the IV ring is being used at this ring stop. This includes when packets are passing by and when packets are being sent, but does not include when packets are being sunk into the ring stop. The IV ring is unidirectional. Whether UP or DN is used is dependent on the system programming. Thereofore, one should generally set both the UP and DN bits for a given polarity (or both) at a given time.; Filters any polarity",
- "UMask": "0xFF",
+ "UMask": "0xff",
"Unit": "R2PCIe"
},
{
"BriefDescription": "R2 IV Ring in Use; Counterclockwise",
- "Counter": "0,1,2,3",
"EventCode": "0xa",
"EventName": "UNC_R2_RING_IV_USED.CCW",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the IV ring is being used at this ring stop. This includes when packets are passing by and when packets are being sent, but does not include when packets are being sunk into the ring stop. The IV ring is unidirectional. Whether UP or DN is used is dependent on the system programming. Thereofore, one should generally set both the UP and DN bits for a given polarity (or both) at a given time.; Filters for Counterclockwise polarity",
- "UMask": "0xCC",
+ "UMask": "0xcc",
"Unit": "R2PCIe"
},
{
"BriefDescription": "R2 IV Ring in Use; Clockwise",
- "Counter": "0,1,2,3",
"EventCode": "0xa",
"EventName": "UNC_R2_RING_IV_USED.CW",
"PerPkg": "1",
@@ -778,7 +700,6 @@
},
{
"BriefDescription": "Ingress Cycles Not Empty; NCB",
- "Counter": "0,1",
"EventCode": "0x10",
"EventName": "UNC_R2_RxR_CYCLES_NE.NCB",
"PerPkg": "1",
@@ -788,7 +709,6 @@
},
{
"BriefDescription": "Ingress Cycles Not Empty; NCS",
- "Counter": "0,1",
"EventCode": "0x10",
"EventName": "UNC_R2_RxR_CYCLES_NE.NCS",
"PerPkg": "1",
@@ -798,7 +718,6 @@
},
{
"BriefDescription": "Ingress Allocations; NCB",
- "Counter": "0,1",
"EventCode": "0x11",
"EventName": "UNC_R2_RxR_INSERTS.NCB",
"PerPkg": "1",
@@ -808,7 +727,6 @@
},
{
"BriefDescription": "Ingress Allocations; NCS",
- "Counter": "0,1",
"EventCode": "0x11",
"EventName": "UNC_R2_RxR_INSERTS.NCS",
"PerPkg": "1",
@@ -881,7 +799,6 @@
},
{
"BriefDescription": "Egress CCW NACK; AD CCW",
- "Counter": "0,1",
"EventCode": "0x28",
"EventName": "UNC_R2_TxR_NACK_CCW.AD",
"PerPkg": "1",
@@ -891,7 +808,6 @@
},
{
"BriefDescription": "Egress CCW NACK; AK CCW",
- "Counter": "0,1",
"EventCode": "0x28",
"EventName": "UNC_R2_TxR_NACK_CCW.AK",
"PerPkg": "1",
@@ -901,7 +817,6 @@
},
{
"BriefDescription": "Egress CCW NACK; BL CCW",
- "Counter": "0,1",
"EventCode": "0x28",
"EventName": "UNC_R2_TxR_NACK_CCW.BL",
"PerPkg": "1",
@@ -911,7 +826,6 @@
},
{
"BriefDescription": "Egress CW NACK; AD CW",
- "Counter": "0,1",
"EventCode": "0x26",
"EventName": "UNC_R2_TxR_NACK_CW.AD",
"PerPkg": "1",
@@ -921,7 +835,6 @@
},
{
"BriefDescription": "Egress CW NACK; AK CW",
- "Counter": "0,1",
"EventCode": "0x26",
"EventName": "UNC_R2_TxR_NACK_CW.AK",
"PerPkg": "1",
@@ -931,7 +844,6 @@
},
{
"BriefDescription": "Egress CW NACK; BL CW",
- "Counter": "0,1",
"EventCode": "0x26",
"EventName": "UNC_R2_TxR_NACK_CW.BL",
"PerPkg": "1",
@@ -941,7 +853,6 @@
},
{
"BriefDescription": "Number of uclks in domain",
- "Counter": "0,1,2",
"EventCode": "0x1",
"EventName": "UNC_R3_CLOCKTICKS",
"PerPkg": "1",
@@ -950,7 +861,6 @@
},
{
"BriefDescription": "CBox AD Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2c",
"EventName": "UNC_R3_C_HI_AD_CREDITS_EMPTY.CBO10",
"PerPkg": "1",
@@ -960,7 +870,6 @@
},
{
"BriefDescription": "CBox AD Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2c",
"EventName": "UNC_R3_C_HI_AD_CREDITS_EMPTY.CBO11",
"PerPkg": "1",
@@ -970,7 +879,6 @@
},
{
"BriefDescription": "CBox AD Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2c",
"EventName": "UNC_R3_C_HI_AD_CREDITS_EMPTY.CBO12",
"PerPkg": "1",
@@ -980,7 +888,6 @@
},
{
"BriefDescription": "CBox AD Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2c",
"EventName": "UNC_R3_C_HI_AD_CREDITS_EMPTY.CBO13",
"PerPkg": "1",
@@ -990,7 +897,6 @@
},
{
"BriefDescription": "CBox AD Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2c",
"EventName": "UNC_R3_C_HI_AD_CREDITS_EMPTY.CBO14",
"PerPkg": "1",
@@ -1000,7 +906,6 @@
},
{
"BriefDescription": "CBox AD Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2c",
"EventName": "UNC_R3_C_HI_AD_CREDITS_EMPTY.CBO8",
"PerPkg": "1",
@@ -1010,7 +915,6 @@
},
{
"BriefDescription": "CBox AD Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2c",
"EventName": "UNC_R3_C_HI_AD_CREDITS_EMPTY.CBO9",
"PerPkg": "1",
@@ -1020,7 +924,6 @@
},
{
"BriefDescription": "CBox AD Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2b",
"EventName": "UNC_R3_C_LO_AD_CREDITS_EMPTY.CBO0",
"PerPkg": "1",
@@ -1030,7 +933,6 @@
},
{
"BriefDescription": "CBox AD Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2b",
"EventName": "UNC_R3_C_LO_AD_CREDITS_EMPTY.CBO1",
"PerPkg": "1",
@@ -1040,7 +942,6 @@
},
{
"BriefDescription": "CBox AD Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2b",
"EventName": "UNC_R3_C_LO_AD_CREDITS_EMPTY.CBO2",
"PerPkg": "1",
@@ -1050,7 +951,6 @@
},
{
"BriefDescription": "CBox AD Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2b",
"EventName": "UNC_R3_C_LO_AD_CREDITS_EMPTY.CBO3",
"PerPkg": "1",
@@ -1060,7 +960,6 @@
},
{
"BriefDescription": "CBox AD Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2b",
"EventName": "UNC_R3_C_LO_AD_CREDITS_EMPTY.CBO4",
"PerPkg": "1",
@@ -1070,7 +969,6 @@
},
{
"BriefDescription": "CBox AD Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2b",
"EventName": "UNC_R3_C_LO_AD_CREDITS_EMPTY.CBO5",
"PerPkg": "1",
@@ -1080,7 +978,6 @@
},
{
"BriefDescription": "CBox AD Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2b",
"EventName": "UNC_R3_C_LO_AD_CREDITS_EMPTY.CBO6",
"PerPkg": "1",
@@ -1090,7 +987,6 @@
},
{
"BriefDescription": "CBox AD Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2b",
"EventName": "UNC_R3_C_LO_AD_CREDITS_EMPTY.CBO7",
"PerPkg": "1",
@@ -1100,7 +996,6 @@
},
{
"BriefDescription": "HA/R2 AD Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2f",
"EventName": "UNC_R3_HA_R2_BL_CREDITS_EMPTY.HA0",
"PerPkg": "1",
@@ -1110,7 +1005,6 @@
},
{
"BriefDescription": "HA/R2 AD Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2f",
"EventName": "UNC_R3_HA_R2_BL_CREDITS_EMPTY.HA1",
"PerPkg": "1",
@@ -1120,7 +1014,6 @@
},
{
"BriefDescription": "HA/R2 AD Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2f",
"EventName": "UNC_R3_HA_R2_BL_CREDITS_EMPTY.R2_NCB",
"PerPkg": "1",
@@ -1130,7 +1023,6 @@
},
{
"BriefDescription": "HA/R2 AD Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2f",
"EventName": "UNC_R3_HA_R2_BL_CREDITS_EMPTY.R2_NCS",
"PerPkg": "1",
@@ -1140,7 +1032,6 @@
},
{
"BriefDescription": "QPI0 AD Credits Empty",
- "Counter": "0,1",
"EventCode": "0x29",
"EventName": "UNC_R3_QPI0_AD_CREDITS_EMPTY.VN0_HOM",
"PerPkg": "1",
@@ -1150,7 +1041,6 @@
},
{
"BriefDescription": "QPI0 AD Credits Empty",
- "Counter": "0,1",
"EventCode": "0x29",
"EventName": "UNC_R3_QPI0_AD_CREDITS_EMPTY.VN0_NDR",
"PerPkg": "1",
@@ -1160,7 +1050,6 @@
},
{
"BriefDescription": "QPI0 AD Credits Empty",
- "Counter": "0,1",
"EventCode": "0x29",
"EventName": "UNC_R3_QPI0_AD_CREDITS_EMPTY.VN0_SNP",
"PerPkg": "1",
@@ -1170,7 +1059,6 @@
},
{
"BriefDescription": "QPI0 AD Credits Empty",
- "Counter": "0,1",
"EventCode": "0x29",
"EventName": "UNC_R3_QPI0_AD_CREDITS_EMPTY.VN1_HOM",
"PerPkg": "1",
@@ -1180,7 +1068,6 @@
},
{
"BriefDescription": "QPI0 AD Credits Empty",
- "Counter": "0,1",
"EventCode": "0x29",
"EventName": "UNC_R3_QPI0_AD_CREDITS_EMPTY.VN1_NDR",
"PerPkg": "1",
@@ -1190,7 +1077,6 @@
},
{
"BriefDescription": "QPI0 AD Credits Empty",
- "Counter": "0,1",
"EventCode": "0x29",
"EventName": "UNC_R3_QPI0_AD_CREDITS_EMPTY.VN1_SNP",
"PerPkg": "1",
@@ -1200,7 +1086,6 @@
},
{
"BriefDescription": "QPI0 AD Credits Empty",
- "Counter": "0,1",
"EventCode": "0x29",
"EventName": "UNC_R3_QPI0_AD_CREDITS_EMPTY.VNA",
"PerPkg": "1",
@@ -1210,7 +1095,6 @@
},
{
"BriefDescription": "QPI0 BL Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2d",
"EventName": "UNC_R3_QPI0_BL_CREDITS_EMPTY.VN0_HOM",
"PerPkg": "1",
@@ -1220,7 +1104,6 @@
},
{
"BriefDescription": "QPI0 BL Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2d",
"EventName": "UNC_R3_QPI0_BL_CREDITS_EMPTY.VN0_NDR",
"PerPkg": "1",
@@ -1230,7 +1113,6 @@
},
{
"BriefDescription": "QPI0 BL Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2d",
"EventName": "UNC_R3_QPI0_BL_CREDITS_EMPTY.VN0_SNP",
"PerPkg": "1",
@@ -1240,7 +1122,6 @@
},
{
"BriefDescription": "QPI0 BL Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2d",
"EventName": "UNC_R3_QPI0_BL_CREDITS_EMPTY.VN1_HOM",
"PerPkg": "1",
@@ -1250,7 +1131,6 @@
},
{
"BriefDescription": "QPI0 BL Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2d",
"EventName": "UNC_R3_QPI0_BL_CREDITS_EMPTY.VN1_NDR",
"PerPkg": "1",
@@ -1260,7 +1140,6 @@
},
{
"BriefDescription": "QPI0 BL Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2d",
"EventName": "UNC_R3_QPI0_BL_CREDITS_EMPTY.VN1_SNP",
"PerPkg": "1",
@@ -1270,7 +1149,6 @@
},
{
"BriefDescription": "QPI0 BL Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2d",
"EventName": "UNC_R3_QPI0_BL_CREDITS_EMPTY.VNA",
"PerPkg": "1",
@@ -1280,7 +1158,6 @@
},
{
"BriefDescription": "QPI1 AD Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2a",
"EventName": "UNC_R3_QPI1_AD_CREDITS_EMPTY.VN0_HOM",
"PerPkg": "1",
@@ -1290,7 +1167,6 @@
},
{
"BriefDescription": "QPI1 AD Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2a",
"EventName": "UNC_R3_QPI1_AD_CREDITS_EMPTY.VN0_NDR",
"PerPkg": "1",
@@ -1300,7 +1176,6 @@
},
{
"BriefDescription": "QPI1 AD Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2a",
"EventName": "UNC_R3_QPI1_AD_CREDITS_EMPTY.VN0_SNP",
"PerPkg": "1",
@@ -1310,7 +1185,6 @@
},
{
"BriefDescription": "QPI1 AD Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2a",
"EventName": "UNC_R3_QPI1_AD_CREDITS_EMPTY.VN1_HOM",
"PerPkg": "1",
@@ -1320,7 +1194,6 @@
},
{
"BriefDescription": "QPI1 AD Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2a",
"EventName": "UNC_R3_QPI1_AD_CREDITS_EMPTY.VN1_NDR",
"PerPkg": "1",
@@ -1330,7 +1203,6 @@
},
{
"BriefDescription": "QPI1 AD Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2a",
"EventName": "UNC_R3_QPI1_AD_CREDITS_EMPTY.VN1_SNP",
"PerPkg": "1",
@@ -1340,7 +1212,6 @@
},
{
"BriefDescription": "QPI1 AD Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2a",
"EventName": "UNC_R3_QPI1_AD_CREDITS_EMPTY.VNA",
"PerPkg": "1",
@@ -1350,7 +1221,6 @@
},
{
"BriefDescription": "QPI1 BL Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2e",
"EventName": "UNC_R3_QPI1_BL_CREDITS_EMPTY.VN0_HOM",
"PerPkg": "1",
@@ -1360,7 +1230,6 @@
},
{
"BriefDescription": "QPI1 BL Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2e",
"EventName": "UNC_R3_QPI1_BL_CREDITS_EMPTY.VN0_NDR",
"PerPkg": "1",
@@ -1370,7 +1239,6 @@
},
{
"BriefDescription": "QPI1 BL Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2e",
"EventName": "UNC_R3_QPI1_BL_CREDITS_EMPTY.VN0_SNP",
"PerPkg": "1",
@@ -1380,7 +1248,6 @@
},
{
"BriefDescription": "QPI1 BL Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2e",
"EventName": "UNC_R3_QPI1_BL_CREDITS_EMPTY.VN1_HOM",
"PerPkg": "1",
@@ -1390,7 +1257,6 @@
},
{
"BriefDescription": "QPI1 BL Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2e",
"EventName": "UNC_R3_QPI1_BL_CREDITS_EMPTY.VN1_NDR",
"PerPkg": "1",
@@ -1400,7 +1266,6 @@
},
{
"BriefDescription": "QPI1 BL Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2e",
"EventName": "UNC_R3_QPI1_BL_CREDITS_EMPTY.VN1_SNP",
"PerPkg": "1",
@@ -1410,7 +1275,6 @@
},
{
"BriefDescription": "QPI1 BL Credits Empty",
- "Counter": "0,1",
"EventCode": "0x2e",
"EventName": "UNC_R3_QPI1_BL_CREDITS_EMPTY.VNA",
"PerPkg": "1",
@@ -1420,17 +1284,15 @@
},
{
"BriefDescription": "R3 AD Ring in Use; Counterclockwise",
- "Counter": "0,1,2",
"EventCode": "0x7",
"EventName": "UNC_R3_RING_AD_USED.CCW",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the AD ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop.",
- "UMask": "0xCC",
+ "UMask": "0xcc",
"Unit": "R3QPI"
},
{
"BriefDescription": "R3 AD Ring in Use; Counterclockwise and Even on VRing 0",
- "Counter": "0,1,2",
"EventCode": "0x7",
"EventName": "UNC_R3_RING_AD_USED.CCW_VR0_EVEN",
"PerPkg": "1",
@@ -1440,7 +1302,6 @@
},
{
"BriefDescription": "R3 AD Ring in Use; Counterclockwise and Odd on VRing 0",
- "Counter": "0,1,2",
"EventCode": "0x7",
"EventName": "UNC_R3_RING_AD_USED.CCW_VR0_ODD",
"PerPkg": "1",
@@ -1450,7 +1311,6 @@
},
{
"BriefDescription": "R3 AD Ring in Use; Clockwise",
- "Counter": "0,1,2",
"EventCode": "0x7",
"EventName": "UNC_R3_RING_AD_USED.CW",
"PerPkg": "1",
@@ -1460,7 +1320,6 @@
},
{
"BriefDescription": "R3 AD Ring in Use; Clockwise and Even on VRing 0",
- "Counter": "0,1,2",
"EventCode": "0x7",
"EventName": "UNC_R3_RING_AD_USED.CW_VR0_EVEN",
"PerPkg": "1",
@@ -1470,7 +1329,6 @@
},
{
"BriefDescription": "R3 AD Ring in Use; Clockwise and Odd on VRing 0",
- "Counter": "0,1,2",
"EventCode": "0x7",
"EventName": "UNC_R3_RING_AD_USED.CW_VR0_ODD",
"PerPkg": "1",
@@ -1480,17 +1338,15 @@
},
{
"BriefDescription": "R3 AK Ring in Use; Counterclockwise",
- "Counter": "0,1,2",
"EventCode": "0x8",
"EventName": "UNC_R3_RING_AK_USED.CCW",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the AK ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop.",
- "UMask": "0xCC",
+ "UMask": "0xcc",
"Unit": "R3QPI"
},
{
"BriefDescription": "R3 AK Ring in Use; Counterclockwise and Even on VRing 0",
- "Counter": "0,1,2",
"EventCode": "0x8",
"EventName": "UNC_R3_RING_AK_USED.CCW_VR0_EVEN",
"PerPkg": "1",
@@ -1500,7 +1356,6 @@
},
{
"BriefDescription": "R3 AK Ring in Use; Counterclockwise and Odd on VRing 0",
- "Counter": "0,1,2",
"EventCode": "0x8",
"EventName": "UNC_R3_RING_AK_USED.CCW_VR0_ODD",
"PerPkg": "1",
@@ -1510,7 +1365,6 @@
},
{
"BriefDescription": "R3 AK Ring in Use; Clockwise",
- "Counter": "0,1,2",
"EventCode": "0x8",
"EventName": "UNC_R3_RING_AK_USED.CW",
"PerPkg": "1",
@@ -1520,7 +1374,6 @@
},
{
"BriefDescription": "R3 AK Ring in Use; Clockwise and Even on VRing 0",
- "Counter": "0,1,2",
"EventCode": "0x8",
"EventName": "UNC_R3_RING_AK_USED.CW_VR0_EVEN",
"PerPkg": "1",
@@ -1530,7 +1383,6 @@
},
{
"BriefDescription": "R3 AK Ring in Use; Clockwise and Odd on VRing 0",
- "Counter": "0,1,2",
"EventCode": "0x8",
"EventName": "UNC_R3_RING_AK_USED.CW_VR0_ODD",
"PerPkg": "1",
@@ -1540,17 +1392,15 @@
},
{
"BriefDescription": "R3 BL Ring in Use; Counterclockwise",
- "Counter": "0,1,2",
"EventCode": "0x9",
"EventName": "UNC_R3_RING_BL_USED.CCW",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the BL ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop.",
- "UMask": "0xCC",
+ "UMask": "0xcc",
"Unit": "R3QPI"
},
{
"BriefDescription": "R3 BL Ring in Use; Counterclockwise and Even on VRing 0",
- "Counter": "0,1,2",
"EventCode": "0x9",
"EventName": "UNC_R3_RING_BL_USED.CCW_VR0_EVEN",
"PerPkg": "1",
@@ -1560,7 +1410,6 @@
},
{
"BriefDescription": "R3 BL Ring in Use; Counterclockwise and Odd on VRing 0",
- "Counter": "0,1,2",
"EventCode": "0x9",
"EventName": "UNC_R3_RING_BL_USED.CCW_VR0_ODD",
"PerPkg": "1",
@@ -1570,7 +1419,6 @@
},
{
"BriefDescription": "R3 BL Ring in Use; Clockwise",
- "Counter": "0,1,2",
"EventCode": "0x9",
"EventName": "UNC_R3_RING_BL_USED.CW",
"PerPkg": "1",
@@ -1580,7 +1428,6 @@
},
{
"BriefDescription": "R3 BL Ring in Use; Clockwise and Even on VRing 0",
- "Counter": "0,1,2",
"EventCode": "0x9",
"EventName": "UNC_R3_RING_BL_USED.CW_VR0_EVEN",
"PerPkg": "1",
@@ -1590,7 +1437,6 @@
},
{
"BriefDescription": "R3 BL Ring in Use; Clockwise and Odd on VRing 0",
- "Counter": "0,1,2",
"EventCode": "0x9",
"EventName": "UNC_R3_RING_BL_USED.CW_VR0_ODD",
"PerPkg": "1",
@@ -1600,27 +1446,24 @@
},
{
"BriefDescription": "R2 IV Ring in Use; Any",
- "Counter": "0,1,2",
"EventCode": "0xA",
"EventName": "UNC_R3_RING_IV_USED.ANY",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the IV ring is being used at this ring stop. This includes when packets are passing by and when packets are being sent, but does not include when packets are being sunk into the ring stop. The IV ring is unidirectional. Whether UP or DN is used is dependent on the system programming. Thereofore, one should generally set both the UP and DN bits for a given polarity (or both) at a given time.; Filters any polarity",
- "UMask": "0xFF",
+ "UMask": "0xff",
"Unit": "R3QPI"
},
{
"BriefDescription": "R2 IV Ring in Use; Counterclockwise",
- "Counter": "0,1,2",
"EventCode": "0xa",
"EventName": "UNC_R3_RING_IV_USED.CCW",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the IV ring is being used at this ring stop. This includes when packets are passing by and when packets are being sent, but does not include when packets are being sunk into the ring stop. The IV ring is unidirectional. Whether UP or DN is used is dependent on the system programming. Thereofore, one should generally set both the UP and DN bits for a given polarity (or both) at a given time.; Filters for Counterclockwise polarity",
- "UMask": "0xCC",
+ "UMask": "0xcc",
"Unit": "R3QPI"
},
{
"BriefDescription": "R2 IV Ring in Use; Clockwise",
- "Counter": "0,1,2",
"EventCode": "0xa",
"EventName": "UNC_R3_RING_IV_USED.CW",
"PerPkg": "1",
@@ -1630,7 +1473,6 @@
},
{
"BriefDescription": "AD Ingress Bypassed",
- "Counter": "0,1",
"EventCode": "0x12",
"EventName": "UNC_R3_RxR_AD_BYPASSED",
"PerPkg": "1",
@@ -1639,7 +1481,6 @@
},
{
"BriefDescription": "Ingress Bypassed",
- "Counter": "0,1",
"EventCode": "0x12",
"EventName": "UNC_R3_RxR_BYPASSED.AD",
"PerPkg": "1",
@@ -1649,7 +1490,6 @@
},
{
"BriefDescription": "Ingress Cycles Not Empty; HOM",
- "Counter": "0,1",
"EventCode": "0x10",
"EventName": "UNC_R3_RxR_CYCLES_NE.HOM",
"PerPkg": "1",
@@ -1659,7 +1499,6 @@
},
{
"BriefDescription": "Ingress Cycles Not Empty; NDR",
- "Counter": "0,1",
"EventCode": "0x10",
"EventName": "UNC_R3_RxR_CYCLES_NE.NDR",
"PerPkg": "1",
@@ -1669,7 +1508,6 @@
},
{
"BriefDescription": "Ingress Cycles Not Empty; SNP",
- "Counter": "0,1",
"EventCode": "0x10",
"EventName": "UNC_R3_RxR_CYCLES_NE.SNP",
"PerPkg": "1",
@@ -1679,7 +1517,6 @@
},
{
"BriefDescription": "Ingress Allocations; DRS",
- "Counter": "0,1",
"EventCode": "0x11",
"EventName": "UNC_R3_RxR_INSERTS.DRS",
"PerPkg": "1",
@@ -1689,7 +1526,6 @@
},
{
"BriefDescription": "Ingress Allocations; HOM",
- "Counter": "0,1",
"EventCode": "0x11",
"EventName": "UNC_R3_RxR_INSERTS.HOM",
"PerPkg": "1",
@@ -1699,7 +1535,6 @@
},
{
"BriefDescription": "Ingress Allocations; NCB",
- "Counter": "0,1",
"EventCode": "0x11",
"EventName": "UNC_R3_RxR_INSERTS.NCB",
"PerPkg": "1",
@@ -1709,7 +1544,6 @@
},
{
"BriefDescription": "Ingress Allocations; NCS",
- "Counter": "0,1",
"EventCode": "0x11",
"EventName": "UNC_R3_RxR_INSERTS.NCS",
"PerPkg": "1",
@@ -1719,7 +1553,6 @@
},
{
"BriefDescription": "Ingress Allocations; NDR",
- "Counter": "0,1",
"EventCode": "0x11",
"EventName": "UNC_R3_RxR_INSERTS.NDR",
"PerPkg": "1",
@@ -1729,7 +1562,6 @@
},
{
"BriefDescription": "Ingress Allocations; SNP",
- "Counter": "0,1",
"EventCode": "0x11",
"EventName": "UNC_R3_RxR_INSERTS.SNP",
"PerPkg": "1",
@@ -1793,7 +1625,6 @@
},
{
"BriefDescription": "Egress NACK; AK CCW",
- "Counter": "0,1",
"EventCode": "0x28",
"EventName": "UNC_R3_TxR_NACK_CCW.AD",
"PerPkg": "1",
@@ -1803,7 +1634,6 @@
},
{
"BriefDescription": "Egress NACK; BL CW",
- "Counter": "0,1",
"EventCode": "0x28",
"EventName": "UNC_R3_TxR_NACK_CCW.AK",
"PerPkg": "1",
@@ -1813,7 +1643,6 @@
},
{
"BriefDescription": "Egress NACK; BL CCW",
- "Counter": "0,1",
"EventCode": "0x28",
"EventName": "UNC_R3_TxR_NACK_CCW.BL",
"PerPkg": "1",
@@ -1823,7 +1652,6 @@
},
{
"BriefDescription": "Egress NACK; AD CW",
- "Counter": "0,1",
"EventCode": "0x26",
"EventName": "UNC_R3_TxR_NACK_CW.AD",
"PerPkg": "1",
@@ -1833,7 +1661,6 @@
},
{
"BriefDescription": "Egress NACK; AD CCW",
- "Counter": "0,1",
"EventCode": "0x26",
"EventName": "UNC_R3_TxR_NACK_CW.AK",
"PerPkg": "1",
@@ -1843,7 +1670,6 @@
},
{
"BriefDescription": "Egress NACK; AK CW",
- "Counter": "0,1",
"EventCode": "0x26",
"EventName": "UNC_R3_TxR_NACK_CW.BL",
"PerPkg": "1",
@@ -1853,7 +1679,6 @@
},
{
"BriefDescription": "VN0 Credit Acquisition Failed on DRS; DRS Message Class",
- "Counter": "0,1",
"EventCode": "0x37",
"EventName": "UNC_R3_VN0_CREDITS_REJECT.DRS",
"PerPkg": "1",
@@ -1863,7 +1688,6 @@
},
{
"BriefDescription": "VN0 Credit Acquisition Failed on DRS; HOM Message Class",
- "Counter": "0,1",
"EventCode": "0x37",
"EventName": "UNC_R3_VN0_CREDITS_REJECT.HOM",
"PerPkg": "1",
@@ -1873,7 +1697,6 @@
},
{
"BriefDescription": "VN0 Credit Acquisition Failed on DRS; NCB Message Class",
- "Counter": "0,1",
"EventCode": "0x37",
"EventName": "UNC_R3_VN0_CREDITS_REJECT.NCB",
"PerPkg": "1",
@@ -1883,7 +1706,6 @@
},
{
"BriefDescription": "VN0 Credit Acquisition Failed on DRS; NCS Message Class",
- "Counter": "0,1",
"EventCode": "0x37",
"EventName": "UNC_R3_VN0_CREDITS_REJECT.NCS",
"PerPkg": "1",
@@ -1893,7 +1715,6 @@
},
{
"BriefDescription": "VN0 Credit Acquisition Failed on DRS; NDR Message Class",
- "Counter": "0,1",
"EventCode": "0x37",
"EventName": "UNC_R3_VN0_CREDITS_REJECT.NDR",
"PerPkg": "1",
@@ -1903,7 +1724,6 @@
},
{
"BriefDescription": "VN0 Credit Acquisition Failed on DRS; SNP Message Class",
- "Counter": "0,1",
"EventCode": "0x37",
"EventName": "UNC_R3_VN0_CREDITS_REJECT.SNP",
"PerPkg": "1",
@@ -1913,7 +1733,6 @@
},
{
"BriefDescription": "VN0 Credit Used; DRS Message Class",
- "Counter": "0,1",
"EventCode": "0x36",
"EventName": "UNC_R3_VN0_CREDITS_USED.DRS",
"PerPkg": "1",
@@ -1923,7 +1742,6 @@
},
{
"BriefDescription": "VN0 Credit Used; HOM Message Class",
- "Counter": "0,1",
"EventCode": "0x36",
"EventName": "UNC_R3_VN0_CREDITS_USED.HOM",
"PerPkg": "1",
@@ -1933,7 +1751,6 @@
},
{
"BriefDescription": "VN0 Credit Used; NCB Message Class",
- "Counter": "0,1",
"EventCode": "0x36",
"EventName": "UNC_R3_VN0_CREDITS_USED.NCB",
"PerPkg": "1",
@@ -1943,7 +1760,6 @@
},
{
"BriefDescription": "VN0 Credit Used; NCS Message Class",
- "Counter": "0,1",
"EventCode": "0x36",
"EventName": "UNC_R3_VN0_CREDITS_USED.NCS",
"PerPkg": "1",
@@ -1953,7 +1769,6 @@
},
{
"BriefDescription": "VN0 Credit Used; NDR Message Class",
- "Counter": "0,1",
"EventCode": "0x36",
"EventName": "UNC_R3_VN0_CREDITS_USED.NDR",
"PerPkg": "1",
@@ -1963,7 +1778,6 @@
},
{
"BriefDescription": "VN0 Credit Used; SNP Message Class",
- "Counter": "0,1",
"EventCode": "0x36",
"EventName": "UNC_R3_VN0_CREDITS_USED.SNP",
"PerPkg": "1",
@@ -1973,7 +1787,6 @@
},
{
"BriefDescription": "VN1 Credit Acquisition Failed on DRS; DRS Message Class",
- "Counter": "0,1",
"EventCode": "0x39",
"EventName": "UNC_R3_VN1_CREDITS_REJECT.DRS",
"PerPkg": "1",
@@ -1983,7 +1796,6 @@
},
{
"BriefDescription": "VN1 Credit Acquisition Failed on DRS; HOM Message Class",
- "Counter": "0,1",
"EventCode": "0x39",
"EventName": "UNC_R3_VN1_CREDITS_REJECT.HOM",
"PerPkg": "1",
@@ -1993,7 +1805,6 @@
},
{
"BriefDescription": "VN1 Credit Acquisition Failed on DRS; NCB Message Class",
- "Counter": "0,1",
"EventCode": "0x39",
"EventName": "UNC_R3_VN1_CREDITS_REJECT.NCB",
"PerPkg": "1",
@@ -2003,7 +1814,6 @@
},
{
"BriefDescription": "VN1 Credit Acquisition Failed on DRS; NCS Message Class",
- "Counter": "0,1",
"EventCode": "0x39",
"EventName": "UNC_R3_VN1_CREDITS_REJECT.NCS",
"PerPkg": "1",
@@ -2013,7 +1823,6 @@
},
{
"BriefDescription": "VN1 Credit Acquisition Failed on DRS; NDR Message Class",
- "Counter": "0,1",
"EventCode": "0x39",
"EventName": "UNC_R3_VN1_CREDITS_REJECT.NDR",
"PerPkg": "1",
@@ -2023,7 +1832,6 @@
},
{
"BriefDescription": "VN1 Credit Acquisition Failed on DRS; SNP Message Class",
- "Counter": "0,1",
"EventCode": "0x39",
"EventName": "UNC_R3_VN1_CREDITS_REJECT.SNP",
"PerPkg": "1",
@@ -2033,7 +1841,6 @@
},
{
"BriefDescription": "VN1 Credit Used; DRS Message Class",
- "Counter": "0,1",
"EventCode": "0x38",
"EventName": "UNC_R3_VN1_CREDITS_USED.DRS",
"PerPkg": "1",
@@ -2043,7 +1850,6 @@
},
{
"BriefDescription": "VN1 Credit Used; HOM Message Class",
- "Counter": "0,1",
"EventCode": "0x38",
"EventName": "UNC_R3_VN1_CREDITS_USED.HOM",
"PerPkg": "1",
@@ -2053,7 +1859,6 @@
},
{
"BriefDescription": "VN1 Credit Used; NCB Message Class",
- "Counter": "0,1",
"EventCode": "0x38",
"EventName": "UNC_R3_VN1_CREDITS_USED.NCB",
"PerPkg": "1",
@@ -2063,7 +1868,6 @@
},
{
"BriefDescription": "VN1 Credit Used; NCS Message Class",
- "Counter": "0,1",
"EventCode": "0x38",
"EventName": "UNC_R3_VN1_CREDITS_USED.NCS",
"PerPkg": "1",
@@ -2073,7 +1877,6 @@
},
{
"BriefDescription": "VN1 Credit Used; NDR Message Class",
- "Counter": "0,1",
"EventCode": "0x38",
"EventName": "UNC_R3_VN1_CREDITS_USED.NDR",
"PerPkg": "1",
@@ -2083,7 +1886,6 @@
},
{
"BriefDescription": "VN1 Credit Used; SNP Message Class",
- "Counter": "0,1",
"EventCode": "0x38",
"EventName": "UNC_R3_VN1_CREDITS_USED.SNP",
"PerPkg": "1",
@@ -2093,7 +1895,6 @@
},
{
"BriefDescription": "VNA credit Acquisitions",
- "Counter": "0,1",
"EventCode": "0x33",
"EventName": "UNC_R3_VNA_CREDITS_ACQUIRED",
"PerPkg": "1",
@@ -2102,7 +1903,6 @@
},
{
"BriefDescription": "VNA credit Acquisitions; HOM Message Class",
- "Counter": "0,1",
"EventCode": "0x33",
"EventName": "UNC_R3_VNA_CREDITS_ACQUIRED.AD",
"PerPkg": "1",
@@ -2112,7 +1912,6 @@
},
{
"BriefDescription": "VNA credit Acquisitions; HOM Message Class",
- "Counter": "0,1",
"EventCode": "0x33",
"EventName": "UNC_R3_VNA_CREDITS_ACQUIRED.BL",
"PerPkg": "1",
@@ -2122,7 +1921,6 @@
},
{
"BriefDescription": "VNA Credit Reject; DRS Message Class",
- "Counter": "0,1",
"EventCode": "0x34",
"EventName": "UNC_R3_VNA_CREDITS_REJECT.DRS",
"PerPkg": "1",
@@ -2132,7 +1930,6 @@
},
{
"BriefDescription": "VNA Credit Reject; HOM Message Class",
- "Counter": "0,1",
"EventCode": "0x34",
"EventName": "UNC_R3_VNA_CREDITS_REJECT.HOM",
"PerPkg": "1",
@@ -2142,7 +1939,6 @@
},
{
"BriefDescription": "VNA Credit Reject; NCB Message Class",
- "Counter": "0,1",
"EventCode": "0x34",
"EventName": "UNC_R3_VNA_CREDITS_REJECT.NCB",
"PerPkg": "1",
@@ -2152,7 +1948,6 @@
},
{
"BriefDescription": "VNA Credit Reject; NCS Message Class",
- "Counter": "0,1",
"EventCode": "0x34",
"EventName": "UNC_R3_VNA_CREDITS_REJECT.NCS",
"PerPkg": "1",
@@ -2162,7 +1957,6 @@
},
{
"BriefDescription": "VNA Credit Reject; NDR Message Class",
- "Counter": "0,1",
"EventCode": "0x34",
"EventName": "UNC_R3_VNA_CREDITS_REJECT.NDR",
"PerPkg": "1",
@@ -2172,7 +1966,6 @@
},
{
"BriefDescription": "VNA Credit Reject; SNP Message Class",
- "Counter": "0,1",
"EventCode": "0x34",
"EventName": "UNC_R3_VNA_CREDITS_REJECT.SNP",
"PerPkg": "1",
@@ -2182,7 +1975,6 @@
},
{
"BriefDescription": "Cycles with no VNA credits available",
- "Counter": "0,1",
"EventCode": "0x31",
"EventName": "UNC_R3_VNA_CREDIT_CYCLES_OUT",
"PerPkg": "1",
@@ -2191,16 +1983,19 @@
},
{
"BriefDescription": "Cycles with 1 or more VNA credits in use",
- "Counter": "0,1",
"EventCode": "0x32",
"EventName": "UNC_R3_VNA_CREDIT_CYCLES_USED",
"PerPkg": "1",
"PublicDescription": "Number of QPI uclk cycles with one or more VNA credits in use. This event can be used in conjunction with the VNA In-Use Accumulator to calculate the average number of used VNA credits.",
"Unit": "R3QPI"
},
+ {
+ "EventName": "UNC_U_CLOCKTICKS",
+ "PerPkg": "1",
+ "Unit": "UBOX"
+ },
{
"BriefDescription": "VLW Received",
- "Counter": "0,1",
"EventCode": "0x42",
"EventName": "UNC_U_EVENT_MSG.DOORBELL_RCVD",
"PerPkg": "1",
@@ -2210,7 +2005,6 @@
},
{
"BriefDescription": "VLW Received",
- "Counter": "0,1",
"EventCode": "0x42",
"EventName": "UNC_U_EVENT_MSG.INT_PRIO",
"PerPkg": "1",
@@ -2220,7 +2014,6 @@
},
{
"BriefDescription": "VLW Received",
- "Counter": "0,1",
"EventCode": "0x42",
"EventName": "UNC_U_EVENT_MSG.IPI_RCVD",
"PerPkg": "1",
@@ -2230,7 +2023,6 @@
},
{
"BriefDescription": "VLW Received",
- "Counter": "0,1",
"EventCode": "0x42",
"EventName": "UNC_U_EVENT_MSG.MSI_RCVD",
"PerPkg": "1",
@@ -2240,7 +2032,6 @@
},
{
"BriefDescription": "VLW Received",
- "Counter": "0,1",
"EventCode": "0x42",
"EventName": "UNC_U_EVENT_MSG.VLW_RCVD",
"PerPkg": "1",
@@ -2250,7 +2041,6 @@
},
{
"BriefDescription": "Filter Match",
- "Counter": "0,1",
"EventCode": "0x41",
"EventName": "UNC_U_FILTER_MATCH.DISABLE",
"PerPkg": "1",
@@ -2260,7 +2050,6 @@
},
{
"BriefDescription": "Filter Match",
- "Counter": "0,1",
"EventCode": "0x41",
"EventName": "UNC_U_FILTER_MATCH.ENABLE",
"PerPkg": "1",
@@ -2270,7 +2059,6 @@
},
{
"BriefDescription": "Filter Match",
- "Counter": "0,1",
"EventCode": "0x41",
"EventName": "UNC_U_FILTER_MATCH.U2C_DISABLE",
"PerPkg": "1",
@@ -2280,7 +2068,6 @@
},
{
"BriefDescription": "Filter Match",
- "Counter": "0,1",
"EventCode": "0x41",
"EventName": "UNC_U_FILTER_MATCH.U2C_ENABLE",
"PerPkg": "1",
@@ -2290,7 +2077,6 @@
},
{
"BriefDescription": "IDI Lock/SplitLock Cycles",
- "Counter": "0,1",
"EventCode": "0x44",
"EventName": "UNC_U_LOCK_CYCLES",
"PerPkg": "1",
@@ -2299,7 +2085,6 @@
},
{
"BriefDescription": "Cycles PHOLD Assert to Ack; Assert to ACK",
- "Counter": "0,1",
"EventCode": "0x45",
"EventName": "UNC_U_PHOLD_CYCLES.ASSERT_TO_ACK",
"PerPkg": "1",
@@ -2309,7 +2094,6 @@
},
{
"BriefDescription": "RACU Request",
- "Counter": "0,1",
"EventCode": "0x46",
"EventName": "UNC_U_RACU_REQUESTS",
"PerPkg": "1",
@@ -2317,7 +2101,6 @@
},
{
"BriefDescription": "Monitor Sent to T0; Correctable Machine Check",
- "Counter": "0,1",
"EventCode": "0x43",
"EventName": "UNC_U_U2C_EVENTS.CMC",
"PerPkg": "1",
@@ -2327,7 +2110,6 @@
},
{
"BriefDescription": "Monitor Sent to T0; Livelock",
- "Counter": "0,1",
"EventCode": "0x43",
"EventName": "UNC_U_U2C_EVENTS.LIVELOCK",
"PerPkg": "1",
@@ -2337,7 +2119,6 @@
},
{
"BriefDescription": "Monitor Sent to T0; LTError",
- "Counter": "0,1",
"EventCode": "0x43",
"EventName": "UNC_U_U2C_EVENTS.LTERROR",
"PerPkg": "1",
@@ -2347,7 +2128,6 @@
},
{
"BriefDescription": "Monitor Sent to T0; Monitor T0",
- "Counter": "0,1",
"EventCode": "0x43",
"EventName": "UNC_U_U2C_EVENTS.MONITOR_T0",
"PerPkg": "1",
@@ -2357,7 +2137,6 @@
},
{
"BriefDescription": "Monitor Sent to T0; Monitor T1",
- "Counter": "0,1",
"EventCode": "0x43",
"EventName": "UNC_U_U2C_EVENTS.MONITOR_T1",
"PerPkg": "1",
@@ -2367,7 +2146,6 @@
},
{
"BriefDescription": "Monitor Sent to T0; Other",
- "Counter": "0,1",
"EventCode": "0x43",
"EventName": "UNC_U_U2C_EVENTS.OTHER",
"PerPkg": "1",
@@ -2377,7 +2155,6 @@
},
{
"BriefDescription": "Monitor Sent to T0; Trap",
- "Counter": "0,1",
"EventCode": "0x43",
"EventName": "UNC_U_U2C_EVENTS.TRAP",
"PerPkg": "1",
@@ -2387,7 +2164,6 @@
},
{
"BriefDescription": "Monitor Sent to T0; Uncorrectable Machine Check",
- "Counter": "0,1",
"EventCode": "0x43",
"EventName": "UNC_U_U2C_EVENTS.UMC",
"PerPkg": "1",
diff --git a/tools/perf/pmu-events/arch/x86/ivytown/uncore-power.json b/tools/perf/pmu-events/arch/x86/ivytown/uncore-power.json
index 74c87217d75c..5df1ebfb89ea 100644
--- a/tools/perf/pmu-events/arch/x86/ivytown/uncore-power.json
+++ b/tools/perf/pmu-events/arch/x86/ivytown/uncore-power.json
@@ -1,7 +1,6 @@
[
{
"BriefDescription": "pclk Cycles",
- "Counter": "0,1,2,3",
"EventName": "UNC_P_CLOCKTICKS",
"PerPkg": "1",
"PublicDescription": "The PCU runs off a fixed 800 MHz clock. This event counts the number of pclk cycles measured while the counter was enabled. The pclk, like the Memory Controller's dclk, counts at a constant rate making it a good measure of actual wall time.",
@@ -9,7 +8,6 @@
},
{
"BriefDescription": "Core 0 C State Transition Cycles",
- "Counter": "0,1,2,3",
"EventCode": "0x70",
"EventName": "UNC_P_CORE0_TRANSITION_CYCLES",
"PerPkg": "1",
@@ -18,7 +16,6 @@
},
{
"BriefDescription": "Core 10 C State Transition Cycles",
- "Counter": "0,1,2,3",
"EventCode": "0x7a",
"EventName": "UNC_P_CORE10_TRANSITION_CYCLES",
"PerPkg": "1",
@@ -27,7 +24,6 @@
},
{
"BriefDescription": "Core 11 C State Transition Cycles",
- "Counter": "0,1,2,3",
"EventCode": "0x7b",
"EventName": "UNC_P_CORE11_TRANSITION_CYCLES",
"PerPkg": "1",
@@ -36,7 +32,6 @@
},
{
"BriefDescription": "Core 12 C State Transition Cycles",
- "Counter": "0,1,2,3",
"EventCode": "0x7c",
"EventName": "UNC_P_CORE12_TRANSITION_CYCLES",
"PerPkg": "1",
@@ -45,7 +40,6 @@
},
{
"BriefDescription": "Core 13 C State Transition Cycles",
- "Counter": "0,1,2,3",
"EventCode": "0x7d",
"EventName": "UNC_P_CORE13_TRANSITION_CYCLES",
"PerPkg": "1",
@@ -54,7 +48,6 @@
},
{
"BriefDescription": "Core 14 C State Transition Cycles",
- "Counter": "0,1,2,3",
"EventCode": "0x7e",
"EventName": "UNC_P_CORE14_TRANSITION_CYCLES",
"PerPkg": "1",
@@ -63,7 +56,6 @@
},
{
"BriefDescription": "Core 1 C State Transition Cycles",
- "Counter": "0,1,2,3",
"EventCode": "0x71",
"EventName": "UNC_P_CORE1_TRANSITION_CYCLES",
"PerPkg": "1",
@@ -72,7 +64,6 @@
},
{
"BriefDescription": "Core 2 C State Transition Cycles",
- "Counter": "0,1,2,3",
"EventCode": "0x72",
"EventName": "UNC_P_CORE2_TRANSITION_CYCLES",
"PerPkg": "1",
@@ -81,7 +72,6 @@
},
{
"BriefDescription": "Core 3 C State Transition Cycles",
- "Counter": "0,1,2,3",
"EventCode": "0x73",
"EventName": "UNC_P_CORE3_TRANSITION_CYCLES",
"PerPkg": "1",
@@ -90,7 +80,6 @@
},
{
"BriefDescription": "Core 4 C State Transition Cycles",
- "Counter": "0,1,2,3",
"EventCode": "0x74",
"EventName": "UNC_P_CORE4_TRANSITION_CYCLES",
"PerPkg": "1",
@@ -99,7 +88,6 @@
},
{
"BriefDescription": "Core 5 C State Transition Cycles",
- "Counter": "0,1,2,3",
"EventCode": "0x75",
"EventName": "UNC_P_CORE5_TRANSITION_CYCLES",
"PerPkg": "1",
@@ -108,7 +96,6 @@
},
{
"BriefDescription": "Core 6 C State Transition Cycles",
- "Counter": "0,1,2,3",
"EventCode": "0x76",
"EventName": "UNC_P_CORE6_TRANSITION_CYCLES",
"PerPkg": "1",
@@ -117,7 +104,6 @@
},
{
"BriefDescription": "Core 7 C State Transition Cycles",
- "Counter": "0,1,2,3",
"EventCode": "0x77",
"EventName": "UNC_P_CORE7_TRANSITION_CYCLES",
"PerPkg": "1",
@@ -126,7 +112,6 @@
},
{
"BriefDescription": "Core 8 C State Transition Cycles",
- "Counter": "0,1,2,3",
"EventCode": "0x78",
"EventName": "UNC_P_CORE8_TRANSITION_CYCLES",
"PerPkg": "1",
@@ -135,7 +120,6 @@
},
{
"BriefDescription": "Core 9 C State Transition Cycles",
- "Counter": "0,1,2,3",
"EventCode": "0x79",
"EventName": "UNC_P_CORE9_TRANSITION_CYCLES",
"PerPkg": "1",
@@ -144,157 +128,126 @@
},
{
"BriefDescription": "Deep C State Rejection - Core 0",
- "Counter": "0,1,2,3",
"EventCode": "0x17",
"EventName": "UNC_P_DELAYED_C_STATE_ABORT_CORE0",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of times that a deep C state was requested, but the delayed C state algorithm rejected the deep sleep state. In other words, a wake event occurred before the timer expired that causes a transition into the deeper C state.",
"Unit": "PCU"
},
{
"BriefDescription": "Deep C State Rejection - Core 1",
- "Counter": "0,1,2,3",
"EventCode": "0x18",
"EventName": "UNC_P_DELAYED_C_STATE_ABORT_CORE1",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of times that a deep C state was requested, but the delayed C state algorithm rejected the deep sleep state. In other words, a wake event occurred before the timer expired that causes a transition into the deeper C state.",
"Unit": "PCU"
},
{
"BriefDescription": "Deep C State Rejection - Core 10",
- "Counter": "0,1,2,3",
"EventCode": "0x21",
"EventName": "UNC_P_DELAYED_C_STATE_ABORT_CORE10",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of times that a deep C state was requested, but the delayed C state algorithm rejected the deep sleep state. In other words, a wake event occurred before the timer expired that causes a transition into the deeper C state.",
"Unit": "PCU"
},
{
"BriefDescription": "Deep C State Rejection - Core 11",
- "Counter": "0,1,2,3",
"EventCode": "0x22",
"EventName": "UNC_P_DELAYED_C_STATE_ABORT_CORE11",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of times that a deep C state was requested, but the delayed C state algorithm rejected the deep sleep state. In other words, a wake event occurred before the timer expired that causes a transition into the deeper C state.",
"Unit": "PCU"
},
{
"BriefDescription": "Deep C State Rejection - Core 12",
- "Counter": "0,1,2,3",
"EventCode": "0x23",
"EventName": "UNC_P_DELAYED_C_STATE_ABORT_CORE12",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of times that a deep C state was requested, but the delayed C state algorithm rejected the deep sleep state. In other words, a wake event occurred before the timer expired that causes a transition into the deeper C state.",
"Unit": "PCU"
},
{
"BriefDescription": "Deep C State Rejection - Core 13",
- "Counter": "0,1,2,3",
"EventCode": "0x24",
"EventName": "UNC_P_DELAYED_C_STATE_ABORT_CORE13",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of times that a deep C state was requested, but the delayed C state algorithm rejected the deep sleep state. In other words, a wake event occurred before the timer expired that causes a transition into the deeper C state.",
"Unit": "PCU"
},
{
"BriefDescription": "Deep C State Rejection - Core 14",
- "Counter": "0,1,2,3",
"EventCode": "0x25",
"EventName": "UNC_P_DELAYED_C_STATE_ABORT_CORE14",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of times that a deep C state was requested, but the delayed C state algorithm rejected the deep sleep state. In other words, a wake event occurred before the timer expired that causes a transition into the deeper C state.",
"Unit": "PCU"
},
{
"BriefDescription": "Deep C State Rejection - Core 2",
- "Counter": "0,1,2,3",
"EventCode": "0x19",
"EventName": "UNC_P_DELAYED_C_STATE_ABORT_CORE2",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of times that a deep C state was requested, but the delayed C state algorithm rejected the deep sleep state. In other words, a wake event occurred before the timer expired that causes a transition into the deeper C state.",
"Unit": "PCU"
},
{
"BriefDescription": "Deep C State Rejection - Core 3",
- "Counter": "0,1,2,3",
"EventCode": "0x1a",
"EventName": "UNC_P_DELAYED_C_STATE_ABORT_CORE3",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of times that a deep C state was requested, but the delayed C state algorithm rejected the deep sleep state. In other words, a wake event occurred before the timer expired that causes a transition into the deeper C state.",
"Unit": "PCU"
},
{
"BriefDescription": "Deep C State Rejection - Core 4",
- "Counter": "0,1,2,3",
"EventCode": "0x1b",
"EventName": "UNC_P_DELAYED_C_STATE_ABORT_CORE4",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of times that a deep C state was requested, but the delayed C state algorithm rejected the deep sleep state. In other words, a wake event occurred before the timer expired that causes a transition into the deeper C state.",
"Unit": "PCU"
},
{
"BriefDescription": "Deep C State Rejection - Core 5",
- "Counter": "0,1,2,3",
"EventCode": "0x1c",
"EventName": "UNC_P_DELAYED_C_STATE_ABORT_CORE5",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of times that a deep C state was requested, but the delayed C state algorithm rejected the deep sleep state. In other words, a wake event occurred before the timer expired that causes a transition into the deeper C state.",
"Unit": "PCU"
},
{
"BriefDescription": "Deep C State Rejection - Core 6",
- "Counter": "0,1,2,3",
"EventCode": "0x1d",
"EventName": "UNC_P_DELAYED_C_STATE_ABORT_CORE6",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of times that a deep C state was requested, but the delayed C state algorithm rejected the deep sleep state. In other words, a wake event occurred before the timer expired that causes a transition into the deeper C state.",
"Unit": "PCU"
},
{
"BriefDescription": "Deep C State Rejection - Core 7",
- "Counter": "0,1,2,3",
"EventCode": "0x1e",
"EventName": "UNC_P_DELAYED_C_STATE_ABORT_CORE7",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of times that a deep C state was requested, but the delayed C state algorithm rejected the deep sleep state. In other words, a wake event occurred before the timer expired that causes a transition into the deeper C state.",
"Unit": "PCU"
},
{
"BriefDescription": "Deep C State Rejection - Core 8",
- "Counter": "0,1,2,3",
"EventCode": "0x1f",
"EventName": "UNC_P_DELAYED_C_STATE_ABORT_CORE8",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of times that a deep C state was requested, but the delayed C state algorithm rejected the deep sleep state. In other words, a wake event occurred before the timer expired that causes a transition into the deeper C state.",
"Unit": "PCU"
},
{
"BriefDescription": "Deep C State Rejection - Core 9",
- "Counter": "0,1,2,3",
"EventCode": "0x20",
"EventName": "UNC_P_DELAYED_C_STATE_ABORT_CORE9",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Number of times that a deep C state was requested, but the delayed C state algorithm rejected the deep sleep state. In other words, a wake event occurred before the timer expired that causes a transition into the deeper C state.",
"Unit": "PCU"
},
{
"BriefDescription": "Core 0 C State Demotions",
- "Counter": "0,1,2,3",
"EventCode": "0x1e",
"EventName": "UNC_P_DEMOTIONS_CORE0",
"PerPkg": "1",
@@ -303,7 +256,6 @@
},
{
"BriefDescription": "Core 1 C State Demotions",
- "Counter": "0,1,2,3",
"EventCode": "0x1f",
"EventName": "UNC_P_DEMOTIONS_CORE1",
"PerPkg": "1",
@@ -312,7 +264,6 @@
},
{
"BriefDescription": "Core 10 C State Demotions",
- "Counter": "0,1,2,3",
"EventCode": "0x42",
"EventName": "UNC_P_DEMOTIONS_CORE10",
"PerPkg": "1",
@@ -321,7 +272,6 @@
},
{
"BriefDescription": "Core 11 C State Demotions",
- "Counter": "0,1,2,3",
"EventCode": "0x43",
"EventName": "UNC_P_DEMOTIONS_CORE11",
"PerPkg": "1",
@@ -330,7 +280,6 @@
},
{
"BriefDescription": "Core 12 C State Demotions",
- "Counter": "0,1,2,3",
"EventCode": "0x44",
"EventName": "UNC_P_DEMOTIONS_CORE12",
"PerPkg": "1",
@@ -339,7 +288,6 @@
},
{
"BriefDescription": "Core 13 C State Demotions",
- "Counter": "0,1,2,3",
"EventCode": "0x45",
"EventName": "UNC_P_DEMOTIONS_CORE13",
"PerPkg": "1",
@@ -348,7 +296,6 @@
},
{
"BriefDescription": "Core 14 C State Demotions",
- "Counter": "0,1,2,3",
"EventCode": "0x46",
"EventName": "UNC_P_DEMOTIONS_CORE14",
"PerPkg": "1",
@@ -357,7 +304,6 @@
},
{
"BriefDescription": "Core 2 C State Demotions",
- "Counter": "0,1,2,3",
"EventCode": "0x20",
"EventName": "UNC_P_DEMOTIONS_CORE2",
"PerPkg": "1",
@@ -366,7 +312,6 @@
},
{
"BriefDescription": "Core 3 C State Demotions",
- "Counter": "0,1,2,3",
"EventCode": "0x21",
"EventName": "UNC_P_DEMOTIONS_CORE3",
"PerPkg": "1",
@@ -375,7 +320,6 @@
},
{
"BriefDescription": "Core 4 C State Demotions",
- "Counter": "0,1,2,3",
"EventCode": "0x22",
"EventName": "UNC_P_DEMOTIONS_CORE4",
"PerPkg": "1",
@@ -384,7 +328,6 @@
},
{
"BriefDescription": "Core 5 C State Demotions",
- "Counter": "0,1,2,3",
"EventCode": "0x23",
"EventName": "UNC_P_DEMOTIONS_CORE5",
"PerPkg": "1",
@@ -393,7 +336,6 @@
},
{
"BriefDescription": "Core 6 C State Demotions",
- "Counter": "0,1,2,3",
"EventCode": "0x24",
"EventName": "UNC_P_DEMOTIONS_CORE6",
"PerPkg": "1",
@@ -402,7 +344,6 @@
},
{
"BriefDescription": "Core 7 C State Demotions",
- "Counter": "0,1,2,3",
"EventCode": "0x25",
"EventName": "UNC_P_DEMOTIONS_CORE7",
"PerPkg": "1",
@@ -411,7 +352,6 @@
},
{
"BriefDescription": "Core 8 C State Demotions",
- "Counter": "0,1,2,3",
"EventCode": "0x40",
"EventName": "UNC_P_DEMOTIONS_CORE8",
"PerPkg": "1",
@@ -420,7 +360,6 @@
},
{
"BriefDescription": "Core 9 C State Demotions",
- "Counter": "0,1,2,3",
"EventCode": "0x41",
"EventName": "UNC_P_DEMOTIONS_CORE9",
"PerPkg": "1",
@@ -429,7 +368,6 @@
},
{
"BriefDescription": "Frequency Residency",
- "Counter": "0,1,2,3",
"EventCode": "0xb",
"EventName": "UNC_P_FREQ_BAND0_CYCLES",
"PerPkg": "1",
@@ -438,7 +376,6 @@
},
{
"BriefDescription": "Frequency Residency",
- "Counter": "0,1,2,3",
"EventCode": "0xc",
"EventName": "UNC_P_FREQ_BAND1_CYCLES",
"PerPkg": "1",
@@ -447,7 +384,6 @@
},
{
"BriefDescription": "Frequency Residency",
- "Counter": "0,1,2,3",
"EventCode": "0xd",
"EventName": "UNC_P_FREQ_BAND2_CYCLES",
"PerPkg": "1",
@@ -456,7 +392,6 @@
},
{
"BriefDescription": "Frequency Residency",
- "Counter": "0,1,2,3",
"EventCode": "0xe",
"EventName": "UNC_P_FREQ_BAND3_CYCLES",
"PerPkg": "1",
@@ -465,7 +400,6 @@
},
{
"BriefDescription": "Current Strongest Upper Limit Cycles",
- "Counter": "0,1,2,3",
"EventCode": "0x7",
"EventName": "UNC_P_FREQ_MAX_CURRENT_CYCLES",
"PerPkg": "1",
@@ -474,7 +408,6 @@
},
{
"BriefDescription": "Thermal Strongest Upper Limit Cycles",
- "Counter": "0,1,2,3",
"EventCode": "0x4",
"EventName": "UNC_P_FREQ_MAX_LIMIT_THERMAL_CYCLES",
"PerPkg": "1",
@@ -483,7 +416,6 @@
},
{
"BriefDescription": "OS Strongest Upper Limit Cycles",
- "Counter": "0,1,2,3",
"EventCode": "0x6",
"EventName": "UNC_P_FREQ_MAX_OS_CYCLES",
"PerPkg": "1",
@@ -492,7 +424,6 @@
},
{
"BriefDescription": "Power Strongest Upper Limit Cycles",
- "Counter": "0,1,2,3",
"EventCode": "0x5",
"EventName": "UNC_P_FREQ_MAX_POWER_CYCLES",
"PerPkg": "1",
@@ -501,7 +432,6 @@
},
{
"BriefDescription": "IO P Limit Strongest Lower Limit Cycles",
- "Counter": "0,1,2,3",
"EventCode": "0x61",
"EventName": "UNC_P_FREQ_MIN_IO_P_CYCLES",
"PerPkg": "1",
@@ -510,7 +440,6 @@
},
{
"BriefDescription": "Perf P Limit Strongest Lower Limit Cycles",
- "Counter": "0,1,2,3",
"EventCode": "0x62",
"EventName": "UNC_P_FREQ_MIN_PERF_P_CYCLES",
"PerPkg": "1",
@@ -519,7 +448,6 @@
},
{
"BriefDescription": "Cycles spent changing Frequency",
- "Counter": "0,1,2,3",
"EventCode": "0x60",
"EventName": "UNC_P_FREQ_TRANS_CYCLES",
"PerPkg": "1",
@@ -528,7 +456,6 @@
},
{
"BriefDescription": "Memory Phase Shedding Cycles",
- "Counter": "0,1,2,3",
"EventCode": "0x2f",
"EventName": "UNC_P_MEMORY_PHASE_SHEDDING_CYCLES",
"PerPkg": "1",
@@ -537,67 +464,54 @@
},
{
"BriefDescription": "Package C State Exit Latency",
- "Counter": "0,1,2,3",
"EventCode": "0x26",
"EventName": "UNC_P_PKG_C_EXIT_LATENCY",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the package is transitioning from package C2 to C3.",
"Unit": "PCU"
},
{
"BriefDescription": "Package C State Exit Latency",
- "Counter": "0,1,2,3",
"EventCode": "0x26",
"EventName": "UNC_P_PKG_C_EXIT_LATENCY_SEL",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the package is transitioning from package C2 to C3.",
"Unit": "PCU"
},
{
"BriefDescription": "Package C State Residency - C0",
- "Counter": "0,1,2,3",
"EventCode": "0x2a",
"EventName": "UNC_P_PKG_C_STATE_RESIDENCY_C0_CYCLES",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the package is in C0",
"Unit": "PCU"
},
{
"BriefDescription": "Package C State Residency - C2",
- "Counter": "0,1,2,3",
"EventCode": "0x2b",
"EventName": "UNC_P_PKG_C_STATE_RESIDENCY_C2_CYCLES",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the package is in C2",
"Unit": "PCU"
},
{
"BriefDescription": "Package C State Residency - C3",
- "Counter": "0,1,2,3",
"EventCode": "0x2c",
"EventName": "UNC_P_PKG_C_STATE_RESIDENCY_C3_CYCLES",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the package is in C3",
"Unit": "PCU"
},
{
"BriefDescription": "Package C State Residency - C6",
- "Counter": "0,1,2,3",
"EventCode": "0x2d",
"EventName": "UNC_P_PKG_C_STATE_RESIDENCY_C6_CYCLES",
- "ExtSel": "1",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the package is in C6",
"Unit": "PCU"
},
{
"BriefDescription": "Number of cores in C-State; C0 and C1",
- "Counter": "0,1,2,3",
"EventCode": "0x80",
"EventName": "UNC_P_POWER_STATE_OCCUPANCY.CORES_C0",
"PerPkg": "1",
@@ -606,7 +520,6 @@
},
{
"BriefDescription": "Number of cores in C-State; C3",
- "Counter": "0,1,2,3",
"EventCode": "0x80",
"EventName": "UNC_P_POWER_STATE_OCCUPANCY.CORES_C3",
"PerPkg": "1",
@@ -615,7 +528,6 @@
},
{
"BriefDescription": "Number of cores in C-State; C6 and C7",
- "Counter": "0,1,2,3",
"EventCode": "0x80",
"EventName": "UNC_P_POWER_STATE_OCCUPANCY.CORES_C6",
"PerPkg": "1",
@@ -624,7 +536,6 @@
},
{
"BriefDescription": "External Prochot",
- "Counter": "0,1,2,3",
"EventCode": "0xa",
"EventName": "UNC_P_PROCHOT_EXTERNAL_CYCLES",
"PerPkg": "1",
@@ -633,7 +544,6 @@
},
{
"BriefDescription": "Internal Prochot",
- "Counter": "0,1,2,3",
"EventCode": "0x9",
"EventName": "UNC_P_PROCHOT_INTERNAL_CYCLES",
"PerPkg": "1",
@@ -642,7 +552,6 @@
},
{
"BriefDescription": "Total Core C State Transition Cycles",
- "Counter": "0,1,2,3",
"EventCode": "0x63",
"EventName": "UNC_P_TOTAL_TRANSITION_CYCLES",
"PerPkg": "1",
@@ -651,7 +560,6 @@
},
{
"BriefDescription": "Cycles Changing Voltage",
- "Counter": "0,1,2,3",
"EventCode": "0x3",
"EventName": "UNC_P_VOLT_TRANS_CYCLES_CHANGE",
"PerPkg": "1",
@@ -660,7 +568,6 @@
},
{
"BriefDescription": "Cycles Decreasing Voltage",
- "Counter": "0,1,2,3",
"EventCode": "0x2",
"EventName": "UNC_P_VOLT_TRANS_CYCLES_DECREASE",
"PerPkg": "1",
@@ -669,7 +576,6 @@
},
{
"BriefDescription": "Cycles Increasing Voltage",
- "Counter": "0,1,2,3",
"EventCode": "0x1",
"EventName": "UNC_P_VOLT_TRANS_CYCLES_INCREASE",
"PerPkg": "1",
@@ -678,7 +584,6 @@
},
{
"BriefDescription": "VR Hot",
- "Counter": "0,1,2,3",
"EventCode": "0x32",
"EventName": "UNC_P_VR_HOT_CYCLES",
"PerPkg": "1",
diff --git a/tools/perf/pmu-events/arch/x86/ivytown/virtual-memory.json b/tools/perf/pmu-events/arch/x86/ivytown/virtual-memory.json
index 6624d02ad715..410763dd4394 100644
--- a/tools/perf/pmu-events/arch/x86/ivytown/virtual-memory.json
+++ b/tools/perf/pmu-events/arch/x86/ivytown/virtual-memory.json
@@ -1,8 +1,6 @@
[
{
"BriefDescription": "Demand load Miss in all translation lookaside buffer (TLB) levels causes a page walk that completes of any page size.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x08",
"EventName": "DTLB_LOAD_MISSES.DEMAND_LD_WALK_COMPLETED",
"SampleAfterValue": "100003",
@@ -10,8 +8,6 @@
},
{
"BriefDescription": "Demand load cycles page miss handler (PMH) is busy with this walk.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x08",
"EventName": "DTLB_LOAD_MISSES.DEMAND_LD_WALK_DURATION",
"SampleAfterValue": "2000003",
@@ -19,8 +15,6 @@
},
{
"BriefDescription": "Page walk for a large page completed for Demand load.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x08",
"EventName": "DTLB_LOAD_MISSES.LARGE_PAGE_WALK_COMPLETED",
"SampleAfterValue": "100003",
@@ -28,8 +22,6 @@
},
{
"BriefDescription": "Demand load Miss in all translation lookaside buffer (TLB) levels causes an page walk of any page size.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x08",
"EventName": "DTLB_LOAD_MISSES.MISS_CAUSES_A_WALK",
"PublicDescription": "Misses in all TLB levels that cause a page walk of any page size from demand loads.",
@@ -38,8 +30,6 @@
},
{
"BriefDescription": "Load operations that miss the first DTLB level but hit the second and do not cause page walks",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x5F",
"EventName": "DTLB_LOAD_MISSES.STLB_HIT",
"PublicDescription": "Counts load operations that missed 1st level DTLB but hit the 2nd level.",
@@ -48,8 +38,6 @@
},
{
"BriefDescription": "Demand load Miss in all translation lookaside buffer (TLB) levels causes a page walk that completes of any page size.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x08",
"EventName": "DTLB_LOAD_MISSES.WALK_COMPLETED",
"PublicDescription": "Misses in all TLB levels that caused page walk completed of any size by demand loads.",
@@ -58,8 +46,6 @@
},
{
"BriefDescription": "Demand load cycles page miss handler (PMH) is busy with this walk.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x08",
"EventName": "DTLB_LOAD_MISSES.WALK_DURATION",
"PublicDescription": "Cycle PMH is busy with a walk due to demand loads.",
@@ -68,8 +54,6 @@
},
{
"BriefDescription": "Store misses in all DTLB levels that cause page walks",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x49",
"EventName": "DTLB_STORE_MISSES.MISS_CAUSES_A_WALK",
"PublicDescription": "Miss in all TLB levels causes a page walk of any page size (4K/2M/4M/1G).",
@@ -78,8 +62,6 @@
},
{
"BriefDescription": "Store operations that miss the first TLB level but hit the second and do not cause page walks",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x49",
"EventName": "DTLB_STORE_MISSES.STLB_HIT",
"PublicDescription": "Store operations that miss the first TLB level but hit the second and do not cause page walks.",
@@ -88,8 +70,6 @@
},
{
"BriefDescription": "Store misses in all DTLB levels that cause completed page walks",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x49",
"EventName": "DTLB_STORE_MISSES.WALK_COMPLETED",
"PublicDescription": "Miss in all TLB levels causes a page walk that completes of any page size (4K/2M/4M/1G).",
@@ -98,8 +78,6 @@
},
{
"BriefDescription": "Cycles when PMH is busy with page walks",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x49",
"EventName": "DTLB_STORE_MISSES.WALK_DURATION",
"PublicDescription": "Cycles PMH is busy with this walk.",
@@ -108,8 +86,6 @@
},
{
"BriefDescription": "Cycle count for an Extended Page table walk. The Extended Page Directory cache is used by Virtual Machine operating systems while the guest operating systems use the standard TLB caches.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x4F",
"EventName": "EPT.WALK_CYCLES",
"SampleAfterValue": "2000003",
@@ -117,8 +93,6 @@
},
{
"BriefDescription": "Flushing of the Instruction TLB (ITLB) pages, includes 4k/2M/4M pages.",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xAE",
"EventName": "ITLB.ITLB_FLUSH",
"PublicDescription": "Counts the number of ITLB flushes, includes 4k/2M/4M pages.",
@@ -127,8 +101,6 @@
},
{
"BriefDescription": "Completed page walks in ITLB due to STLB load misses for large pages",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x85",
"EventName": "ITLB_MISSES.LARGE_PAGE_WALK_COMPLETED",
"PublicDescription": "Completed page walks in ITLB due to STLB load misses for large pages.",
@@ -137,8 +109,6 @@
},
{
"BriefDescription": "Misses at all ITLB levels that cause page walks",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x85",
"EventName": "ITLB_MISSES.MISS_CAUSES_A_WALK",
"PublicDescription": "Misses in all ITLB levels that cause page walks.",
@@ -147,8 +117,6 @@
},
{
"BriefDescription": "Operations that miss the first ITLB level but hit the second and do not cause any page walks",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x85",
"EventName": "ITLB_MISSES.STLB_HIT",
"PublicDescription": "Number of cache load STLB hits. No page walk.",
@@ -157,8 +125,6 @@
},
{
"BriefDescription": "Misses in all ITLB levels that cause completed page walks",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x85",
"EventName": "ITLB_MISSES.WALK_COMPLETED",
"PublicDescription": "Misses in all ITLB levels that cause completed page walks.",
@@ -167,8 +133,6 @@
},
{
"BriefDescription": "Cycles when PMH is busy with page walks",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0x85",
"EventName": "ITLB_MISSES.WALK_DURATION",
"PublicDescription": "Cycle PMH is busy with a walk.",
@@ -177,8 +141,6 @@
},
{
"BriefDescription": "DTLB flush attempts of the thread-specific entries",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xBD",
"EventName": "TLB_FLUSH.DTLB_THREAD",
"PublicDescription": "DTLB flush attempts of the thread-specific entries.",
@@ -187,8 +149,6 @@
},
{
"BriefDescription": "STLB flush attempts",
- "Counter": "0,1,2,3",
- "CounterHTOff": "0,1,2,3,4,5,6,7",
"EventCode": "0xBD",
"EventName": "TLB_FLUSH.STLB_ANY",
"PublicDescription": "Count number of STLB flush attempts.",
--
2.39.0.314.g84b9a713c41-goog
Powered by blists - more mailing lists