linux-kernel - Re: [PATCH v2 1/3] arm64: dts: qcom: pm8450a: add rtc node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 15 Dec 2022 13:59:14 +0100
From:   Konrad Dybcio <konrad.dybcio@...aro.org>
To:     Eric Chanudet <echanude@...hat.com>,
        Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc:     linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, Andrew Halaney <ahalaney@...hat.com>,
        Brian Masney <bmasney@...hat.com>
Subject: Re: [PATCH v2 1/3] arm64: dts: qcom: pm8450a: add rtc node



On 14.12.2022 22:09, Eric Chanudet wrote:
> Add the rtc block on pm8450a first pmic to enable the rtc for
> sa8540p-ride.
> 
> Signed-off-by: Eric Chanudet <echanude@...hat.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>

Konrad
>  arch/arm64/boot/dts/qcom/pm8450a.dtsi | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pm8450a.dtsi b/arch/arm64/boot/dts/qcom/pm8450a.dtsi
> index 34fc72896761..c9b8da43b237 100644
> --- a/arch/arm64/boot/dts/qcom/pm8450a.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8450a.dtsi
> @@ -13,6 +13,14 @@ pm8450a: pmic@0 {
>  		#address-cells = <1>;
>  		#size-cells = <0>;
>  
> +		rtc@...0 {
> +			compatible = "qcom,pm8941-rtc";
> +			reg = <0x6000>, <0x6100>;
> +			reg-names = "rtc", "alarm";
> +			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
> +			wakeup-source;
> +		};
> +
>  		pm8450a_gpios: gpio@...0 {
>  			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
>  			reg = <0xc000>;