linux-kernel - Re: [PATCH 5/6] arm64: dts: qcom: msm8976: Declare and use SDC2 pins

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <33fe1249-34b4-443b-4258-586ed8c5f0e6@linaro.org>
Date:   Thu, 15 Dec 2022 14:20:30 +0100
From:   Konrad Dybcio <konrad.dybcio@...aro.org>
To:     Marijn Suijten <marijn.suijten@...ainline.org>,
        phone-devel@...r.kernel.org, Bjorn Andersson <andersson@...nel.org>
Cc:     ~postmarketos/upstreaming@...ts.sr.ht,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@...ainline.org>,
        Konrad Dybcio <konrad.dybcio@...ainline.org>,
        Martin Botka <martin.botka@...ainline.org>,
        Jami Kettunen <jami.kettunen@...ainline.org>,
        Andy Gross <agross@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@...labora.com>,
        Luca Weiss <luca@...tu.xyz>,
        Adam Skladowski <a39.skl@...il.com>,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH 5/6] arm64: dts: qcom: msm8976: Declare and use SDC2 pins



On 15.12.2022 00:20, Marijn Suijten wrote:
> Add the pinctrl states for SDC2 and use them on sdhc_2 to support SD
> Cards on the currently mainlined Sony Loire platform.
> 
> Signed-off-by: Marijn Suijten <marijn.suijten@...ainline.org>
> ---
>  .../qcom/msm8956-sony-xperia-loire-kugo.dts   |  6 +++
>  .../dts/qcom/msm8956-sony-xperia-loire.dtsi   |  6 +++
>  arch/arm64/boot/dts/qcom/msm8976.dtsi         | 45 +++++++++++++++++++
>  3 files changed, 57 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-kugo.dts b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-kugo.dts
> index 3fb8e23e4330..9178943e2ee1 100644
> --- a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-kugo.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-kugo.dts
> @@ -33,3 +33,9 @@ &pm8950_l1 {
>  	regulator-min-microvolt = <1100000>;
>  	regulator-max-microvolt = <1300000>;
>  };
> +
> +&sdc2_on_state {
> +	data-pins {
> +		drive-strength = <8>;
> +	};
> +};
You can add a label to the data-pins subnode.


> diff --git a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi
> index 700583a56a0e..2253fb05f1c9 100644
> --- a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi
> @@ -264,6 +264,12 @@ &sdhc_1 {
>  	status = "okay";
>  };
>  
> +&sdc2_on_state {
> +	clk-pins {
> +		drive-strength = <10>;
> +	};
> +};
> +
>  &sdhc_2 {
>  	bus-width = <4>;
>  	cd-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
> diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi
> index 7d4c7548882c..f3371eaa2940 100644
> --- a/arch/arm64/boot/dts/qcom/msm8976.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi
> @@ -558,6 +558,46 @@ rclk-pins {
>  				};
>  			};
>  
> +			sdc2_off_state: sdc2-off-state {
> +				clk-pins {
> +					pins = "sdc2_clk";
> +					drive-strength = <2>;
> +					bias-disable;
> +				};
> +
> +				cmd-pins {
> +					pins = "sdc2_cmd";
> +					drive-strength = <2>;
> +					bias-pull-up;
> +				};
> +
> +				data-pins {
> +					pins = "sdc2_data";
> +					drive-strength = <2>;
> +					bias-pull-up;
> +				};
> +			};
> +
> +			sdc2_on_state: sdc2-on-state {
> +				clk-pins {
> +					pins = "sdc2_clk";
> +					drive-strength = <16>;
> +					bias-disable;
> +				};
> +
> +				cmd-pins {
> +					pins = "sdc2_cmd";
> +					drive-strength = <10>;
> +					bias-pull-up;
> +				};
> +
> +				data-pins {
> +					pins = "sdc2_data";
> +					drive-strength = <10>;
> +					bias-pull-up;
> +				};
> +			};
> +
>  			spi1_default: spi0-default-state {
>  				spi-pins {
>  					pins = "gpio0", "gpio1", "gpio3";
> @@ -751,6 +791,11 @@ sdhc_2: mmc@...4000 {
>  				 <&gcc GCC_SDCC2_APPS_CLK>,
>  				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
>  			clock-names = "iface", "core", "xo";
> +
> +			pinctrl-0 = <&sdc2_on_state>;
> +			pinctrl-1 = <&sdc2_off_state>;
> +			pinctrl-names = "default", "sleep";
Ditto (prev patch)

Konrad
> +
>  			status = "disabled";
>  		};
>