[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20221215140045.2584886-1-clabbe@baylibre.com>
Date: Thu, 15 Dec 2022 14:00:43 +0000
From: Corentin Labbe <clabbe@...libre.com>
To: gregkh@...uxfoundation.org, johan@...nel.org
Cc: linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org,
Corentin Labbe <clabbe@...libre.com>
Subject: [PATCH v4 0/2] usb: serial: add support for CH348
Hello
The CH348 is an octo serial to USB adapter.
The following patch adds a driver for supporting it.
Since there is no public datasheet, unfortunatly it remains some magic values.
It was tested with a large range of baud from 1200 to 1500000 and used with
success in one of our kernel CI testlab.
Regards
Changes since v1:
- use a data structure for encoding/decoding messages.
- check if needed endpoints exists
- fix URB leak in ch348_allocate_status_read error case
- test for maximum baud rate as stated by datasheet
Changes since v2:
- specify ch348_rxbuf data length
- Use correct speed_t dwDTERate instead of __le32
- test for maximum baud rate supported according to datasheet
- Use a define for CH348_TX_HDRSIZE
Changes since v3
- Fixed all reported problem from https://lore.kernel.org/lkml/Y5NDwEakGJbmB6+b@Red/T/#mb6234d0427cfdabf412190565e215995a41482dd
Mostly reworked the endpoint mux to be the same than mx_uport
Corentin Labbe (2):
usb: serial: add support for CH348
usb: serial: add myself as maintainer of CH348
MAINTAINERS | 5 +
drivers/usb/serial/Kconfig | 9 +
drivers/usb/serial/Makefile | 1 +
drivers/usb/serial/ch348.c | 660 ++++++++++++++++++++++++++++++++++++
4 files changed, 675 insertions(+)
create mode 100644 drivers/usb/serial/ch348.c
--
2.37.4
Powered by blists - more mailing lists