[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <fa818a64-4535-ba61-067c-e9f553c25726@linaro.org>
Date: Thu, 15 Dec 2022 19:53:58 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Melody Olvera <quic_molvera@...cinc.com>,
Bjorn Andersson <andersson@...nel.org>
Cc: Andy Gross <agross@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v4 2/2] arm64: dts: qcom: Add base QDU1000/QRU1000 IDP DTs
On 15/12/2022 18:56, Melody Olvera wrote:
>
>
> On 12/15/2022 12:44 AM, Krzysztof Kozlowski wrote:
>> On 14/12/2022 19:59, Melody Olvera wrote:
>>>>> + #clock-cells = <0>;
>>>>> + };
>>>>> +
>>>>> + sleep_clk: sleep-clk {
>>>>> + compatible = "fixed-clock";
>>>>> + clock-frequency = <32000>;
>>>>> + #clock-cells = <0>;
>>>>> + };
>>>>> +
>>>>> + pcie_0_pipe_clk: pcie-0-pipe-clk {
>>>> Afaict these clocks are not referenced anywhere, so please skip them.
>>> Yes, so I included them to be consistent with the bindings. They will be needed later;
>>> should I still remove?
>>>
>> If they are not referenced anywhere, how is it consistent with bindings?
>> Where do the bindings require defining such nodes?
>
> These bindings here: https://lore.kernel.org/all/20221118181826.28269-2-quic_molvera@quicinc.com/
> I believe you commented that we either have these clocks or we don't, correct? I added them to
> the dt since these clocks exist and will be needed later when USB and PCIE nodes are added.
> As Konrad noted, these technically belong in the PHYs, but I was told to put stub fixed
> clocks instead here: https://lore.kernel.org/lkml/2c8c4642-8aee-3da3-7698-5e08b4c5894d@linaro.org/
>
> How is this to be handled? Should I remove the clocks from the dt and the bindings and add them
This was a discussion about clock controller. You either have these
clocks as input of the clock controller or not. If you have - drop
minItems. If you do not have - trim the list to just two items.
What do you actually write in DTS is of course connected with the
bindings but separate problem. I was not referring to what should be or
should not be in DTS. We talked about clock controller and its inputs.
Best regards,
Krzysztof
Powered by blists - more mailing lists