lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <994718d8-f3ee-af5e-bda7-f913f66597ce@linaro.org>
Date:   Fri, 16 Dec 2022 12:15:31 +0100
From:   Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To:     Yanhong Wang <yanhong.wang@...rfivetech.com>,
        linux-riscv@...ts.infradead.org, netdev@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:     "David S . Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Emil Renner Berthing <kernel@...il.dk>,
        Richard Cochran <richardcochran@...il.com>,
        Andrew Lunn <andrew@...n.ch>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Peter Geis <pgwipeout@...il.com>
Subject: Re: [PATCH v2 5/9] dt-bindings: net: motorcomm: add support for
 Motorcomm YT8531

On 16/12/2022 08:06, Yanhong Wang wrote:
> Add support for Motorcomm Technology YT8531 10/100/1000 Ethernet PHY.
> The document describe details of clock delay train configuration.
> 
> Signed-off-by: Yanhong Wang <yanhong.wang@...rfivetech.com>

Missing vendor prefix documentation. I don't think you tested this at
all with checkpatch and dt_binding_check.

> ---
>  .../bindings/net/motorcomm,yt8531.yaml        | 111 ++++++++++++++++++
>  MAINTAINERS                                   |   1 +
>  2 files changed, 112 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/motorcomm,yt8531.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/motorcomm,yt8531.yaml b/Documentation/devicetree/bindings/net/motorcomm,yt8531.yaml
> new file mode 100644
> index 000000000000..c5b8a09a78bb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/motorcomm,yt8531.yaml
> @@ -0,0 +1,111 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/motorcomm,yt8531.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Motorcomm YT8531 Gigabit Ethernet PHY
> +
> +maintainers:
> +  - Yanhong Wang <yanhong.wang@...rfivetech.com>
> +

Why there is no reference to ethernet-phy.yaml?

> +select:
> +  properties:
> +    $nodename:
> +      pattern: "^ethernet-phy(@[a-f0-9]+)?$"

I don't think that's correct approach. You know affect all phys.

> +
> +  required:
> +    - $nodename
> +
> +properties:
> +  $nodename:
> +    pattern: "^ethernet-phy(@[a-f0-9]+)?$"

Just reference ethernet-phy.yaml.

> +
> +  reg:
> +    minimum: 0
> +    maximum: 31
> +    description:
> +      The ID number for the PHY.

Drop duplicated properties.

> +
> +  rxc_dly_en:

No underscores in node names. Missing vendor prefix. Both apply to all
your other custom properties, unless they are not custom but generic.

Missing ref.

> +    description: |
> +      RGMII Receive PHY Clock Delay defined with fixed 2ns.This is used for

After every full stop goes space.

> +      PHY that have configurable RX internal delays. If this property set
> +      to 1, then automatically add 2ns delay pad for Receive PHY clock.

Nope, this is wrong. You wrote now boolean property as enum.

> +    enum: [0, 1]
> +    default: 0
> +
> +  rx_delay_sel:
> +    description: |
> +      This is supplement to rxc_dly_en property,and it can
> +      be specified in 150ps(pico seconds) steps. The effective
> +      delay is: 150ps * N.

Nope. Use proper units and drop all this register stuff.

> +    minimum: 0
> +    maximum: 15
> +    default: 0
> +
> +  tx_delay_sel_fe:
> +    description: |
> +      RGMII Transmit PHY Clock Delay defined in pico seconds.This is used for
> +      PHY's that have configurable TX internal delays when speed is 100Mbps
> +      or 10Mbps. It can be specified in 150ps steps, the effective delay
> +      is: 150ps * N.

The binding is in very poor shape. Please look carefully in
example-schema. All my previous comments apply everywhere.

> +    minimum: 0
> +    maximum: 15
> +    default: 15
> +
> +  tx_delay_sel:
> +    description: |
> +      RGMII Transmit PHY Clock Delay defined in pico seconds.This is used for
> +      PHY's that have configurable TX internal delays when speed is 1000Mbps.
> +      It can be specified in 150ps steps, the effective delay is: 150ps * N.
> +    minimum: 0
> +    maximum: 15
> +    default: 1
> +
> +  tx_inverted_10:
> +    description: |
> +      Use original or inverted RGMII Transmit PHY Clock to drive the RGMII
> +      Transmit PHY Clock delay train configuration when speed is 10Mbps.
> +      0: original   1: inverted
> +    enum: [0, 1]
> +    default: 0
> +
> +  tx_inverted_100:
> +    description: |
> +      Use original or inverted RGMII Transmit PHY Clock to drive the RGMII
> +      Transmit PHY Clock delay train configuration when speed is 100Mbps.
> +      0: original   1: inverted
> +    enum: [0, 1]
> +    default: 0
> +
> +  tx_inverted_1000:
> +    description: |
> +      Use original or inverted RGMII Transmit PHY Clock to drive the RGMII
> +      Transmit PHY Clock delay train configuration when speed is 1000Mbps.
> +      0: original   1: inverted
> +    enum: [0, 1]
> +    default: 0
> +
> +required:
> +  - reg
> +
> +additionalProperties: true

This must be false. After referencing ethernet-phy this should be
unevaluatedProperties: false.


Best regards,
Krzysztof

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ