| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221216233408.1283581-3-marijn.suijten@somainline.org>
Date: Sat, 17 Dec 2022 00:34:07 +0100
From: Marijn Suijten <marijn.suijten@...ainline.org>
To: phone-devel@...r.kernel.org, Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Rob Herring <robh+dt@...nel.org>
Cc: ~postmarketos/upstreaming@...ts.sr.ht,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...ainline.org>,
Konrad Dybcio <konrad.dybcio@...ainline.org>,
Martin Botka <martin.botka@...ainline.org>,
Jami Kettunen <jami.kettunen@...ainline.org>,
Marijn Suijten <marijn.suijten@...ainline.org>,
Lux Aliaga <they@...t.lgbt>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v2 2/3] arm64: dts: qcom: sm6125: Add QUPs with SPI and I2C Serial Engines
Add Qualcomm Universal Peripheral nodes with SPI and I2C Serial Engines.
QUP 0 only has two SPIs at index 0 and 2, QUP 1 has four SPIs with a gap
in the middle (ranging from 5-9 with SPI 7 missing). Both QUPs have 5
I2C Serial Engines.
Signed-off-by: Martin Botka <martin.botka@...ainline.org>
[Marijn: Add iommus, reword patch description, reorder all properties,
sort based on address, use QCOM_GPI_ constants, drop dma cells from 5
to 3]
Signed-off-by: Marijn Suijten <marijn.suijten@...ainline.org>
---
arch/arm64/boot/dts/qcom/sm6125.dtsi | 298 +++++++++++++++++++++++++++
1 file changed, 298 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
index 5fc304b2da63..36ba74b5ad89 100644
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -753,6 +753,138 @@ gpi_dma0: dma-controller@...0000 {
status = "disabled";
};
+ qupv3_id_0: geniqup@...0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0x04ac0000 0x2000>;
+ clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+ clock-names = "m-ahb", "s-ahb";
+ iommus = <&apps_smmu 0x123 0x0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ i2c0: i2c@...0000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x04a80000 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&qup_i2c0_default>;
+ pinctrl-1 = <&qup_i2c0_sleep>;
+ pinctrl-names = "default", "sleep";
+ dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi0: spi@...0000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x04a80000 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&qup_spi0_default>;
+ pinctrl-1 = <&qup_spi0_sleep>;
+ pinctrl-names = "default", "sleep";
+ dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@...4000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x04a84000 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&qup_i2c1_default>;
+ pinctrl-1 = <&qup_i2c1_sleep>;
+ pinctrl-names = "default", "sleep";
+ dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@...8000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x04a88000 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&qup_i2c2_default>;
+ pinctrl-1 = <&qup_i2c2_sleep>;
+ pinctrl-names = "default", "sleep";
+ dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi2: spi@...8000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x04a88000 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&qup_spi2_default>;
+ pinctrl-1 = <&qup_spi2_sleep>;
+ pinctrl-names = "default", "sleep";
+ dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@...c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x04a8c000 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&qup_i2c3_default>;
+ pinctrl-1 = <&qup_i2c3_sleep>;
+ pinctrl-names = "default", "sleep";
+ dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@...0000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x04a90000 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&qup_i2c4_default>;
+ pinctrl-1 = <&qup_i2c4_sleep>;
+ pinctrl-names = "default", "sleep";
+ dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
gpi_dma1: dma-controller@...0000 {
compatible = "qcom,sm6125-gpi-dma", "qcom,sdm845-gpi-dma";
reg = <0x04c00000 0x60000>;
@@ -771,6 +903,172 @@ gpi_dma1: dma-controller@...0000 {
status = "disabled";
};
+ qupv3_id_1: geniqup@...0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0x04cc0000 0x2000>;
+ clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+ clock-names = "m-ahb", "s-ahb";
+ iommus = <&apps_smmu 0x143 0x0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ i2c5: i2c@...0000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x04c80000 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&qup_i2c5_default>;
+ pinctrl-1 = <&qup_i2c5_sleep>;
+ pinctrl-names = "default", "sleep";
+ dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi5: spi@...0000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x04c80000 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&qup_spi5_default>;
+ pinctrl-1 = <&qup_spi5_sleep>;
+ pinctrl-names = "default", "sleep";
+ dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@...4000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x04c84000 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&qup_i2c6_default>;
+ pinctrl-1 = <&qup_i2c6_sleep>;
+ pinctrl-names = "default", "sleep";
+ dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi6: spi@...4000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x04c84000 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&qup_spi6_default>;
+ pinctrl-1 = <&qup_spi6_sleep>;
+ pinctrl-names = "default", "sleep";
+ dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@...8000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x04c88000 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&qup_i2c7_default>;
+ pinctrl-1 = <&qup_i2c7_sleep>;
+ pinctrl-names = "default", "sleep";
+ dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c8: i2c@...c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x04c8c000 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&qup_i2c8_default>;
+ pinctrl-1 = <&qup_i2c8_sleep>;
+ pinctrl-names = "default", "sleep";
+ dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi8: spi@...c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x04c8c000 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&qup_spi8_default>;
+ pinctrl-1 = <&qup_spi8_sleep>;
+ pinctrl-names = "default", "sleep";
+ dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c9: i2c@...0000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x04c90000 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&qup_i2c9_default>;
+ pinctrl-1 = <&qup_i2c9_sleep>;
+ pinctrl-names = "default", "sleep";
+ dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi9: spi@...0000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x04c90000 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&qup_spi9_default>;
+ pinctrl-1 = <&qup_spi9_sleep>;
+ pinctrl-names = "default", "sleep";
+ dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
usb3: usb@...8800 {
compatible = "qcom,sm6125-dwc3", "qcom,dwc3";
reg = <0x04ef8800 0x400>;
--
2.39.0
Powered by blists - more mailing lists