[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20221217164311.00004cd7@Huawei.com>
Date: Sat, 17 Dec 2022 16:43:11 +0000
From: Jonathan Cameron <Jonathan.Cameron@...wei.com>
To: Ira Weiny <ira.weiny@...el.com>
CC: Alison Schofield <alison.schofield@...el.com>,
Dan Williams <dan.j.williams@...el.com>,
Davidlohr Bueso <dave@...olabs.net>,
"Bjorn Helgaas" <helgaas@...nel.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
"Vishal Verma" <vishal.l.verma@...el.com>,
Dave Jiang <dave.jiang@...el.com>,
<linux-kernel@...r.kernel.org>, <linux-pci@...r.kernel.org>,
<linux-acpi@...r.kernel.org>, <linux-cxl@...r.kernel.org>
Subject: Re: [PATCH V4 3/9] cxl/mem: Wire up event interrupts
On Fri, 16 Dec 2022 13:33:43 -0800
Ira Weiny <ira.weiny@...el.com> wrote:
> On Fri, Dec 16, 2022 at 06:21:10PM +0000, Jonathan Cameron wrote:
> > On Sun, 11 Dec 2022 23:06:21 -0800
> > ira.weiny@...el.com wrote:
> >
> > > From: Davidlohr Bueso <dave@...olabs.net>
> > >
> > > Currently the only CXL features targeted for irq support require their
> > > message numbers to be within the first 16 entries. The device may
> > > however support less than 16 entries depending on the support it
> > > provides.
> > >
> > > Attempt to allocate these 16 irq vectors. If the device supports less
> > > then the PCI infrastructure will allocate that number. Upon successful
> > > allocation, users can plug in their respective isr at any point
> > > thereafter.
> > >
> > > CXL device events are signaled via interrupts. Each event log may have
> > > a different interrupt message number. These message numbers are
> > > reported in the Get Event Interrupt Policy mailbox command.
> > >
> > > Add interrupt support for event logs. Interrupts are allocated as
> > > shared interrupts. Therefore, all or some event logs can share the same
> > > message number.
> > >
> > > In addition all logs are queried on any interrupt in order of the most
> > > to least severe based on the status register.
> > >
> > > Cc: Bjorn Helgaas <helgaas@...nel.org>
> > > Cc: Jonathan Cameron <Jonathan.Cameron@...wei.com>
> > > Co-developed-by: Ira Weiny <ira.weiny@...el.com>
> > > Signed-off-by: Ira Weiny <ira.weiny@...el.com>
> > > Signed-off-by: Davidlohr Bueso <dave@...olabs.net>
> >
> > Sometimes it feels like we go around in circles as I'm sure we've
> > fixed this at least 3 times now in different sets that got dropped
> > (was definitely in the DOE interrupt support set and was controversial ;)
>
> Well I certainly seem to be spinning ATM. I probably need more eggnog. ;-)
>
> >
> > Nothing in this patch set calls pci_set_master() so no interrupts
> > will even be delivered.
>
> Is this a bug in Qemu then? Because this _is_ tested and irqs _were_
> delivered. I thought we determined that pci_set_master() was called in
> pcim_enable_device() but I don't see that now. :-(
>
> What I do know is this works with Qemu. :-/
Without the addition of a pci_set_master() the kernel code,
I don't get any interrupts on my arm64 test setup. Only reason I realized the
call was missing. Possible there is something different on x86 I guess.
Jonathan
>
> Ira
>
> > I don't think there are any sets in flight
> > that would fix that.
> >
> > Jonathan
> >
> >
> > >
> > > ---
> > > Changes from V3:
> > > Adjust based on changes in patch 1
> > > Consolidate event setup into cxl_event_config()
> > > Consistently use cxl_event_* for function names
> > > Remove cxl_event_int_is_msi()
> > > Ensure DCD log is ignored in status
> > > Simplify event status loop logic
> > > Dan
> > > Fail driver load if the irq's are not allocated
> > > move cxl_event_config_msgnums() to pci.c
> > > s/CXL_PCI_REQUIRED_VECTORS/CXL_PCI_DEFAULT_MAX_VECTORS
> > > s/devm_kmalloc/devm_kzalloc
> > > Fix up pci_alloc_irq_vectors() comment
> > > Pass pdev to cxl_alloc_irq_vectors()
> > > Check FW irq policy prior to configuration
> > > Jonathan
> > > Use FIELD_GET instead of manual masking
> > > ---
> > > drivers/cxl/cxl.h | 4 +
> > > drivers/cxl/cxlmem.h | 19 ++++
> > > drivers/cxl/cxlpci.h | 6 ++
> > > drivers/cxl/pci.c | 208 +++++++++++++++++++++++++++++++++++++++++--
> > > 4 files changed, 231 insertions(+), 6 deletions(-)
> > >
> > > diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
> > > index 5974d1082210..b3964149c77b 100644
> > > --- a/drivers/cxl/cxl.h
> > > +++ b/drivers/cxl/cxl.h
> > > @@ -168,6 +168,10 @@ static inline int ways_to_eiw(unsigned int ways, u8 *eiw)
> > > CXLDEV_EVENT_STATUS_FAIL | \
> > > CXLDEV_EVENT_STATUS_FATAL)
> > >
> > > +/* CXL rev 3.0 section 8.2.9.2.4; Table 8-52 */
> > > +#define CXLDEV_EVENT_INT_MODE_MASK GENMASK(1, 0)
> > > +#define CXLDEV_EVENT_INT_MSGNUM_MASK GENMASK(7, 4)
> > > +
> > > /* CXL 2.0 8.2.8.4 Mailbox Registers */
> > > #define CXLDEV_MBOX_CAPS_OFFSET 0x00
> > > #define CXLDEV_MBOX_CAP_PAYLOAD_SIZE_MASK GENMASK(4, 0)
> > > diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
> > > index dd9aa3dd738e..bd8bfbe61ec8 100644
> > > --- a/drivers/cxl/cxlmem.h
> > > +++ b/drivers/cxl/cxlmem.h
> > > @@ -194,6 +194,23 @@ struct cxl_endpoint_dvsec_info {
> > > struct range dvsec_range[2];
> > > };
> > >
> > > +/**
> > > + * Event Interrupt Policy
> > > + *
> > > + * CXL rev 3.0 section 8.2.9.2.4; Table 8-52
> > > + */
> > > +enum cxl_event_int_mode {
> > > + CXL_INT_NONE = 0x00,
> > > + CXL_INT_MSI_MSIX = 0x01,
> > > + CXL_INT_FW = 0x02
> > > +};
> > > +struct cxl_event_interrupt_policy {
> > > + u8 info_settings;
> > > + u8 warn_settings;
> > > + u8 failure_settings;
> > > + u8 fatal_settings;
> > > +} __packed;
> > > +
> > > /**
> > > * struct cxl_event_state - Event log driver state
> > > *
> > > @@ -288,6 +305,8 @@ enum cxl_opcode {
> > > CXL_MBOX_OP_RAW = CXL_MBOX_OP_INVALID,
> > > CXL_MBOX_OP_GET_EVENT_RECORD = 0x0100,
> > > CXL_MBOX_OP_CLEAR_EVENT_RECORD = 0x0101,
> > > + CXL_MBOX_OP_GET_EVT_INT_POLICY = 0x0102,
> > > + CXL_MBOX_OP_SET_EVT_INT_POLICY = 0x0103,
> > > CXL_MBOX_OP_GET_FW_INFO = 0x0200,
> > > CXL_MBOX_OP_ACTIVATE_FW = 0x0202,
> > > CXL_MBOX_OP_GET_SUPPORTED_LOGS = 0x0400,
> > > diff --git a/drivers/cxl/cxlpci.h b/drivers/cxl/cxlpci.h
> > > index 77dbdb980b12..a8ea04f536ab 100644
> > > --- a/drivers/cxl/cxlpci.h
> > > +++ b/drivers/cxl/cxlpci.h
> > > @@ -53,6 +53,12 @@
> > > #define CXL_DVSEC_REG_LOCATOR_BLOCK_ID_MASK GENMASK(15, 8)
> > > #define CXL_DVSEC_REG_LOCATOR_BLOCK_OFF_LOW_MASK GENMASK(31, 16)
> > >
> > > +/*
> > > + * NOTE: Currently all the functions which are enabled for CXL require their
> > > + * vectors to be in the first 16. Use this as the default max.
> > > + */
> > > +#define CXL_PCI_DEFAULT_MAX_VECTORS 16
> > > +
> > > /* Register Block Identifier (RBI) */
> > > enum cxl_regloc_type {
> > > CXL_REGLOC_RBI_EMPTY = 0,
> > > diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
> > > index a2d8382bc593..d42d87faddb8 100644
> > > --- a/drivers/cxl/pci.c
> > > +++ b/drivers/cxl/pci.c
> > > @@ -445,6 +445,201 @@ static int cxl_mem_alloc_event_buf(struct cxl_dev_state *cxlds)
> > > return 0;
> > > }
> > >
> > > +static int cxl_alloc_irq_vectors(struct pci_dev *pdev)
> > > +{
> > > + int nvecs;
> > > +
> > > + /*
> > > + * CXL requires MSI/MSIX support.
> > > + *
> > > + * Additionally pci_alloc_irq_vectors() handles calling
> > > + * pci_free_irq_vectors() automatically despite not being called
> > > + * pcim_*. See pci_setup_msi_context().
> > > + */
> > > + nvecs = pci_alloc_irq_vectors(pdev, 1, CXL_PCI_DEFAULT_MAX_VECTORS,
> > > + PCI_IRQ_MSIX | PCI_IRQ_MSI);
> > > + if (nvecs < 1) {
> > > + dev_dbg(&pdev->dev, "Failed to alloc irq vectors: %d\n", nvecs);
> > > + return -ENXIO;
> > > + }
> > > + return 0;
> > > +}
> > > +
> > > +struct cxl_dev_id {
> > > + struct cxl_dev_state *cxlds;
> > > +};
> > > +
> > > +static irqreturn_t cxl_event_thread(int irq, void *id)
> > > +{
> > > + struct cxl_dev_id *dev_id = id;
> > > + struct cxl_dev_state *cxlds = dev_id->cxlds;
> > > + u32 status;
> > > +
> > > + do {
> > > + /*
> > > + * CXL 3.0 8.2.8.3.1: The lower 32 bits are the status;
> > > + * ignore the reserved upper 32 bits
> > > + */
> > > + status = readl(cxlds->regs.status + CXLDEV_DEV_EVENT_STATUS_OFFSET);
> > > + /* Ignore logs unknown to the driver */
> > > + status &= CXLDEV_EVENT_STATUS_ALL;
> > > + if (!status)
> > > + break;
> > > + cxl_mem_get_event_records(cxlds, status);
> > > + cond_resched();
> > > + } while (status);
> > > +
> > > + return IRQ_HANDLED;
> > > +}
> > > +
> > > +static int cxl_event_req_irq(struct cxl_dev_state *cxlds, u8 setting)
> > > +{
> > > + struct device *dev = cxlds->dev;
> > > + struct pci_dev *pdev = to_pci_dev(dev);
> > > + struct cxl_dev_id *dev_id;
> > > + int irq;
> > > +
> > > + if (FIELD_GET(CXLDEV_EVENT_INT_MODE_MASK, setting) != CXL_INT_MSI_MSIX)
> > > + return -ENXIO;
> > > +
> > > + /* dev_id must be globally unique and must contain the cxlds */
> > > + dev_id = devm_kzalloc(dev, sizeof(*dev_id), GFP_KERNEL);
> > > + if (!dev_id)
> > > + return -ENOMEM;
> > > + dev_id->cxlds = cxlds;
> > > +
> > > + irq = pci_irq_vector(pdev,
> > > + FIELD_GET(CXLDEV_EVENT_INT_MSGNUM_MASK, setting));
> > > + if (irq < 0)
> > > + return irq;
> > > +
> > > + return devm_request_threaded_irq(dev, irq, NULL, cxl_event_thread,
> > > + IRQF_SHARED, NULL, dev_id);
> > > +}
> > > +
> > > +static int cxl_event_get_int_policy(struct cxl_dev_state *cxlds,
> > > + struct cxl_event_interrupt_policy *policy)
> > > +{
> > > + struct cxl_mbox_cmd mbox_cmd = (struct cxl_mbox_cmd) {
> > > + .opcode = CXL_MBOX_OP_GET_EVT_INT_POLICY,
> > > + .payload_out = policy,
> > > + .size_out = sizeof(*policy),
> > > + };
> > > + int rc;
> > > +
> > > + rc = cxl_internal_send_cmd(cxlds, &mbox_cmd);
> > > + if (rc < 0)
> > > + dev_err(cxlds->dev, "Failed to get event interrupt policy : %d",
> > > + rc);
> > > +
> > > + return rc;
> > > +}
> > > +
> > > +static int cxl_event_config_msgnums(struct cxl_dev_state *cxlds,
> > > + struct cxl_event_interrupt_policy *policy)
> > > +{
> > > + struct cxl_mbox_cmd mbox_cmd;
> > > + int rc;
> > > +
> > > + policy->info_settings = CXL_INT_MSI_MSIX;
> > > + policy->warn_settings = CXL_INT_MSI_MSIX;
> > > + policy->failure_settings = CXL_INT_MSI_MSIX;
> > > + policy->fatal_settings = CXL_INT_MSI_MSIX;
> > > +
> > > + mbox_cmd = (struct cxl_mbox_cmd) {
> > > + .opcode = CXL_MBOX_OP_SET_EVT_INT_POLICY,
> > > + .payload_in = policy,
> > > + .size_in = sizeof(*policy),
> > > + };
> > > +
> > > + rc = cxl_internal_send_cmd(cxlds, &mbox_cmd);
> > > + if (rc < 0) {
> > > + dev_err(cxlds->dev, "Failed to set event interrupt policy : %d",
> > > + rc);
> > > + return rc;
> > > + }
> > > +
> > > + /* Retrieve final interrupt settings */
> > > + return cxl_event_get_int_policy(cxlds, policy);
> > > +}
> > > +
> > > +static int cxl_event_irqsetup(struct cxl_dev_state *cxlds)
> > > +{
> > > + struct cxl_event_interrupt_policy policy;
> > > + int rc;
> > > +
> > > + rc = cxl_event_config_msgnums(cxlds, &policy);
> > > + if (rc)
> > > + return rc;
> > > +
> > > + rc = cxl_event_req_irq(cxlds, policy.info_settings);
> > > + if (rc) {
> > > + dev_err(cxlds->dev, "Failed to get interrupt for event Info log\n");
> > > + return rc;
> > > + }
> > > +
> > > + rc = cxl_event_req_irq(cxlds, policy.warn_settings);
> > > + if (rc) {
> > > + dev_err(cxlds->dev, "Failed to get interrupt for event Warn log\n");
> > > + return rc;
> > > + }
> > > +
> > > + rc = cxl_event_req_irq(cxlds, policy.failure_settings);
> > > + if (rc) {
> > > + dev_err(cxlds->dev, "Failed to get interrupt for event Failure log\n");
> > > + return rc;
> > > + }
> > > +
> > > + rc = cxl_event_req_irq(cxlds, policy.fatal_settings);
> > > + if (rc) {
> > > + dev_err(cxlds->dev, "Failed to get interrupt for event Fatal log\n");
> > > + return rc;
> > > + }
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static bool cxl_event_int_is_fw(u8 setting)
> > > +{
> > > + u8 mode = FIELD_GET(CXLDEV_EVENT_INT_MODE_MASK, setting);
> > > +
> > > + return mode == CXL_INT_FW;
> > > +}
> > > +
> > > +static int cxl_event_config(struct pci_host_bridge *host_bridge,
> > > + struct cxl_dev_state *cxlds)
> > > +{
> > > + struct cxl_event_interrupt_policy policy;
> > > + int rc;
> > > +
> > > + /*
> > > + * When BIOS maintains CXL error reporting control, it will process
> > > + * event records. Only one agent can do so.
> > > + */
> > > + if (!host_bridge->native_cxl_error)
> > > + return 0;
> > > +
> > > + rc = cxl_event_get_int_policy(cxlds, &policy);
> > > + if (rc)
> > > + return rc;
> > > +
> > > + if (cxl_event_int_is_fw(policy.info_settings) ||
> > > + cxl_event_int_is_fw(policy.warn_settings) ||
> > > + cxl_event_int_is_fw(policy.failure_settings) ||
> > > + cxl_event_int_is_fw(policy.fatal_settings)) {
> > > + dev_err(cxlds->dev, "FW still in control of Event Logs despite _OSC settings\n");
> > > + return -EBUSY;
> > > + }
> > > +
> > > + rc = cxl_event_irqsetup(cxlds);
> > > + if (rc)
> > > + return rc;
> > > +
> > > + cxl_mem_get_event_records(cxlds, CXLDEV_EVENT_STATUS_ALL);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> > > {
> > > struct pci_host_bridge *host_bridge = pci_find_host_bridge(pdev->bus);
> > > @@ -519,6 +714,10 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> > > if (rc)
> > > return rc;
> > >
> > > + rc = cxl_alloc_irq_vectors(pdev);
> > > + if (rc)
> > > + return rc;
> > > +
> > > cxlmd = devm_cxl_add_memdev(cxlds);
> > > if (IS_ERR(cxlmd))
> > > return PTR_ERR(cxlmd);
> > > @@ -527,12 +726,9 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> > > if (rc)
> > > return rc;
> > >
> > > - /*
> > > - * When BIOS maintains CXL error reporting control, it will process
> > > - * event records. Only one agent can do so.
> > > - */
> > > - if (host_bridge->native_cxl_error)
> > > - cxl_mem_get_event_records(cxlds, CXLDEV_EVENT_STATUS_ALL);
> > > + rc = cxl_event_config(host_bridge, cxlds);
> > > + if (rc)
> > > + return rc;
> > >
> > > if (cxlds->regs.ras) {
> > > pci_enable_pcie_error_reporting(pdev);
> >
>
Powered by blists - more mailing lists