[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <2Z23NR.0IJBROJ4Q8013@somainline.org>
Date: Sun, 18 Dec 2022 12:09:02 +0100
From: Martin Botka <martin.botka@...ainline.org>
To: Marijn Suijten <marijn.suijten@...ainline.org>
Cc: phone-devel@...r.kernel.org, Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
~postmarketos/upstreaming@...ts.sr.ht,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...ainline.org>,
Konrad Dybcio <konrad.dybcio@...ainline.org>,
Jami Kettunen <jami.kettunen@...ainline.org>,
Lux Aliaga <they@...t.lgbt>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 3/3] arm64: dts: qcom: sm6125-seine: Enable GPI DMA 0,
QUP 0 and I2C SEs
On Sat, Dec 17 2022 at 12:34:08 AM +01:00:00, Marijn Suijten
<marijn.suijten@...ainline.org> wrote:
> Enable I2C Serial Engines 1, 2 and 3 which are known to have hardware
> connected to them, leaving the rest disabled to save on power. For
> this, only GPI DMA 0 and QUP 0 need to be enabled, as nothing seems to
> be connected to Serial Engines on GPU DMA 1 / QUP 1. Beyond this
> downstream only defines a UART console available on Serial Engine 4
> which also resides on QUP 0.
>
> Signed-off-by: Marijn Suijten <marijn.suijten@...ainline.org>
> ---
> .../qcom/sm6125-sony-xperia-seine-pdx201.dts | 29
> +++++++++++++++++++
> 1 file changed, 29 insertions(+)
>
> diff --git
> a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
> b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
> index 1b9e40d3d269..b1de85d8f1c8 100644
> --- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
> +++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
> @@ -141,10 +141,35 @@ active-config0 {
> };
> };
>
> +&gpi_dma0 {
> + status = "okay";
> +};
> +
> &hsusb_phy1 {
> status = "okay";
> };
>
> +&i2c1 {
> + clock-frequency = <400000>;
> + status = "okay";
> +
> + /* NXP PN553 NFC @ 28 */
> +};
> +
> +&i2c2 {
> + clock-frequency = <400000>;
> + status = "okay";
> +
> + /* Samsung touchscreen @ 48 */
> +};
> +
> +&i2c3 {
> + clock-frequency = <1000000>;
> + status = "okay";
> +
> + /* Cirrus Logic CS35L41 boosted audio amplifier @ 40 */
> +};
> +
> &pm6125_adc {
> pinctrl-names = "default";
> pinctrl-0 = <&camera_flash_therm &emmc_ufs_therm &rf_pa1_therm>;
> @@ -246,6 +271,10 @@ &pon_resin {
> linux,code = <KEY_VOLUMEUP>;
> };
>
> +&qupv3_id_0 {
> + status = "okay";
> +};
> +
> &sdc2_off_state {
> sd-cd-pins {
> pins = "gpio98";
> --
> 2.39.0
>
Reviewed-by: Martin Botka <martin.botka@...ainline.org>
-Martin
Powered by blists - more mailing lists