| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAH+2xPDW04NKD34RjcLO=HP1_KDxe9dvbLC9B4Rv+i3O8S58qQ@mail.gmail.com>
Date: Mon, 19 Dec 2022 10:05:53 +0100
From: Bruno Thomsen <bruno.thomsen@...il.com>
To: Hugo Villeneuve <hugo@...ovil.com>
Cc: a.zummo@...ertech.it, alexandre.belloni@...tlin.com,
robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
linux-rtc@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Hugo Villeneuve <hvilleneuve@...onoff.com>
Subject: Re: [PATCH v3 01/14] rtc: pcf2127: add variant-specific configuration structure
Den tor. 15. dec. 2022 kl. 16.19 skrev Hugo Villeneuve <hugo@...ovil.com>:
>
> From: Hugo Villeneuve <hvilleneuve@...onoff.com>
>
> Create variant-specific configuration structures to simplify the
> implementation of new variants into this driver. It will also avoid
> to have too many tests for a specific variant, or a list of variants
> for new devices, inside the code itself.
>
> Add configuration options for the support of the NVMEM, bit CD0 in
> register WD_CTL as well as the maximum number of registers for each
> variant, instead of hardcoding the variant (PCF2127) inside the
> i2c_device_id and spi_device_id structures.
>
> Also specify a different maximum number of registers (max_register)
> for the PCF2129.
>
> Signed-off-by: Hugo Villeneuve <hvilleneuve@...onoff.com>
> ---
> drivers/rtc/rtc-pcf2127.c | 95 +++++++++++++++++++++++++++++++--------
> 1 file changed, 76 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c
> index 87f4fc9df68b..b9a5d47a439f 100644
> --- a/drivers/rtc/rtc-pcf2127.c
> +++ b/drivers/rtc/rtc-pcf2127.c
> @@ -21,6 +21,7 @@
> #include <linux/module.h>
> #include <linux/of.h>
> #include <linux/of_irq.h>
> +#include <linux/of_device.h>
> #include <linux/regmap.h>
> #include <linux/watchdog.h>
>
> @@ -101,10 +102,17 @@
> PCF2127_BIT_CTRL2_WDTF | \
> PCF2127_BIT_CTRL2_TSF2)
>
> +struct pcf21xx_config {
> + int max_register;
> + unsigned int has_nvmem:1;
> + unsigned int has_bit_wd_ctl_cd0:1;
> +};
> +
> struct pcf2127 {
> struct rtc_device *rtc;
> struct watchdog_device wdd;
> struct regmap *regmap;
> + const struct pcf21xx_config *cfg;
> time64_t ts;
> bool ts_valid;
> bool irq_enabled;
> @@ -631,8 +639,27 @@ static const struct attribute_group pcf2127_attr_group = {
> .attrs = pcf2127_attrs,
> };
>
> +enum pcf21xx_type {
> + PCF2127,
> + PCF2129,
> + PCF21XX_LAST_ID
> +};
> +
> +static struct pcf21xx_config pcf21xx_cfg[] = {
> + [PCF2127] = {
> + .max_register = 0x1d,
> + .has_nvmem = 1,
> + .has_bit_wd_ctl_cd0 = 1,
> + },
> + [PCF2129] = {
> + .max_register = 0x19,
> + .has_nvmem = 0,
> + .has_bit_wd_ctl_cd0 = 0,
> + },
> +};
> +
> static int pcf2127_probe(struct device *dev, struct regmap *regmap,
> - int alarm_irq, const char *name, bool is_pcf2127)
> + int alarm_irq, const char *name, const struct pcf21xx_config *config)
> {
> struct pcf2127 *pcf2127;
> int ret = 0;
> @@ -645,6 +672,7 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap,
> return -ENOMEM;
>
> pcf2127->regmap = regmap;
> + pcf2127->cfg = config;
>
> dev_set_drvdata(dev, pcf2127);
>
> @@ -688,7 +716,7 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap,
> set_bit(RTC_FEATURE_ALARM, pcf2127->rtc->features);
> }
>
> - if (is_pcf2127) {
> + if (pcf2127->cfg->has_nvmem) {
> struct nvmem_config nvmem_cfg = {
> .priv = pcf2127,
> .reg_read = pcf2127_nvmem_read,
> @@ -734,7 +762,7 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap,
> PCF2127_BIT_WD_CTL_TF1 |
> PCF2127_BIT_WD_CTL_TF0,
> PCF2127_BIT_WD_CTL_CD1 |
> - (is_pcf2127 ? PCF2127_BIT_WD_CTL_CD0 : 0) |
> + (pcf2127->cfg->has_bit_wd_ctl_cd0 ? PCF2127_BIT_WD_CTL_CD0 : 0) |
> PCF2127_BIT_WD_CTL_TF1);
> if (ret) {
> dev_err(dev, "%s: watchdog config (wd_ctl) failed\n", __func__);
> @@ -799,9 +827,9 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap,
>
> #ifdef CONFIG_OF
> static const struct of_device_id pcf2127_of_match[] = {
> - { .compatible = "nxp,pcf2127" },
> - { .compatible = "nxp,pcf2129" },
> - { .compatible = "nxp,pca2129" },
> + { .compatible = "nxp,pcf2127", .data = &pcf21xx_cfg[PCF2127] },
> + { .compatible = "nxp,pcf2129", .data = &pcf21xx_cfg[PCF2129] },
> + { .compatible = "nxp,pca2129", .data = &pcf21xx_cfg[PCF2129] },
> {}
> };
> MODULE_DEVICE_TABLE(of, pcf2127_of_match);
> @@ -886,26 +914,40 @@ static const struct regmap_bus pcf2127_i2c_regmap = {
> static struct i2c_driver pcf2127_i2c_driver;
>
> static const struct i2c_device_id pcf2127_i2c_id[] = {
> - { "pcf2127", 1 },
> - { "pcf2129", 0 },
> - { "pca2129", 0 },
> + { "pcf2127", PCF2127 },
> + { "pcf2129", PCF2129 },
> + { "pca2129", PCF2129 },
> { }
> };
> MODULE_DEVICE_TABLE(i2c, pcf2127_i2c_id);
>
> static int pcf2127_i2c_probe(struct i2c_client *client)
> {
> - const struct i2c_device_id *id = i2c_match_id(pcf2127_i2c_id, client);
> struct regmap *regmap;
> - static const struct regmap_config config = {
> + static struct regmap_config config = {
> .reg_bits = 8,
> .val_bits = 8,
> - .max_register = 0x1d,
> };
> + const struct pcf21xx_config *variant;
Hi Hugo,
Patch series does not apply on 6.1 tree as pcf2127_i2c_probe() call
signature does not match[1].
static int pcf2127_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
[1] https://elixir.bootlin.com/linux/v6.1/source/drivers/rtc/rtc-pcf2127.c#L888
/Bruno
>
> if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
> return -ENODEV;
>
> + if (client->dev.of_node) {
> + variant = of_device_get_match_data(&client->dev);
> + if (!variant)
> + return -ENODEV;
> + } else {
> + enum pcf21xx_type type =
> + i2c_match_id(pcf2127_i2c_id, client)->driver_data;
> +
> + if (type >= PCF21XX_LAST_ID)
> + return -ENODEV;
> + variant = &pcf21xx_cfg[type];
> + }
> +
> + config.max_register = variant->max_register,
> +
> regmap = devm_regmap_init(&client->dev, &pcf2127_i2c_regmap,
> &client->dev, &config);
> if (IS_ERR(regmap)) {
> @@ -915,7 +957,7 @@ static int pcf2127_i2c_probe(struct i2c_client *client)
> }
>
> return pcf2127_probe(&client->dev, regmap, client->irq,
> - pcf2127_i2c_driver.driver.name, id->driver_data);
> + pcf2127_i2c_driver.driver.name, variant);
> }
>
> static struct i2c_driver pcf2127_i2c_driver = {
> @@ -953,17 +995,32 @@ static void pcf2127_i2c_unregister_driver(void)
> #if IS_ENABLED(CONFIG_SPI_MASTER)
>
> static struct spi_driver pcf2127_spi_driver;
> +static const struct spi_device_id pcf2127_spi_id[];
>
> static int pcf2127_spi_probe(struct spi_device *spi)
> {
> - static const struct regmap_config config = {
> + static struct regmap_config config = {
> .reg_bits = 8,
> .val_bits = 8,
> .read_flag_mask = 0xa0,
> .write_flag_mask = 0x20,
> - .max_register = 0x1d,
> };
> struct regmap *regmap;
> + const struct pcf21xx_config *variant;
> +
> + if (spi->dev.of_node) {
> + variant = of_device_get_match_data(&spi->dev);
> + if (!variant)
> + return -ENODEV;
> + } else {
> + enum pcf21xx_type type = spi_get_device_id(spi)->driver_data;
> +
> + if (type >= PCF21XX_LAST_ID)
> + return -ENODEV;
> + variant = &pcf21xx_cfg[type];
> + }
> +
> + config.max_register = variant->max_register,
>
> regmap = devm_regmap_init_spi(spi, &config);
> if (IS_ERR(regmap)) {
> @@ -974,13 +1031,13 @@ static int pcf2127_spi_probe(struct spi_device *spi)
>
> return pcf2127_probe(&spi->dev, regmap, spi->irq,
> pcf2127_spi_driver.driver.name,
> - spi_get_device_id(spi)->driver_data);
> + variant);
> }
>
> static const struct spi_device_id pcf2127_spi_id[] = {
> - { "pcf2127", 1 },
> - { "pcf2129", 0 },
> - { "pca2129", 0 },
> + { "pcf2127", PCF2127 },
> + { "pcf2129", PCF2129 },
> + { "pca2129", PCF2129 },
> { }
> };
> MODULE_DEVICE_TABLE(spi, pcf2127_spi_id);
> --
> 2.30.2
>
Powered by blists - more mailing lists