| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <MW3PR12MB4553A194B951DAFBA116894995E59@MW3PR12MB4553.namprd12.prod.outlook.com>
Date: Mon, 19 Dec 2022 19:28:52 +0000
From: "Moger, Babu" <Babu.Moger@....com>
To: Reinette Chatre <reinette.chatre@...el.com>,
"corbet@....net" <corbet@....net>,
"tglx@...utronix.de" <tglx@...utronix.de>,
"mingo@...hat.com" <mingo@...hat.com>,
"bp@...en8.de" <bp@...en8.de>
CC: "fenghua.yu@...el.com" <fenghua.yu@...el.com>,
"dave.hansen@...ux.intel.com" <dave.hansen@...ux.intel.com>,
"x86@...nel.org" <x86@...nel.org>, "hpa@...or.com" <hpa@...or.com>,
"paulmck@...nel.org" <paulmck@...nel.org>,
"akpm@...ux-foundation.org" <akpm@...ux-foundation.org>,
"quic_neeraju@...cinc.com" <quic_neeraju@...cinc.com>,
"rdunlap@...radead.org" <rdunlap@...radead.org>,
"damien.lemoal@...nsource.wdc.com" <damien.lemoal@...nsource.wdc.com>,
"songmuchun@...edance.com" <songmuchun@...edance.com>,
"peterz@...radead.org" <peterz@...radead.org>,
"jpoimboe@...nel.org" <jpoimboe@...nel.org>,
"pbonzini@...hat.com" <pbonzini@...hat.com>,
"chang.seok.bae@...el.com" <chang.seok.bae@...el.com>,
"pawan.kumar.gupta@...ux.intel.com"
<pawan.kumar.gupta@...ux.intel.com>,
"jmattson@...gle.com" <jmattson@...gle.com>,
"daniel.sneddon@...ux.intel.com" <daniel.sneddon@...ux.intel.com>,
"Das1, Sandipan" <Sandipan.Das@....com>,
"tony.luck@...el.com" <tony.luck@...el.com>,
"james.morse@....com" <james.morse@....com>,
"linux-doc@...r.kernel.org" <linux-doc@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"bagasdotme@...il.com" <bagasdotme@...il.com>,
"eranian@...gle.com" <eranian@...gle.com>,
"christophe.leroy@...roup.eu" <christophe.leroy@...roup.eu>,
"jarkko@...nel.org" <jarkko@...nel.org>,
"adrian.hunter@...el.com" <adrian.hunter@...el.com>,
"quic_jiles@...cinc.com" <quic_jiles@...cinc.com>,
"peternewman@...gle.com" <peternewman@...gle.com>
Subject: RE: [PATCH v9 10/13] x86/resctrl: Add sysfs interface to write
mbm_total_bytes_config
[AMD Official Use Only - General]
Hi Reinette,
> -----Original Message-----
> From: Reinette Chatre <reinette.chatre@...el.com>
> Sent: Thursday, December 15, 2022 12:25 PM
> To: Moger, Babu <Babu.Moger@....com>; corbet@....net;
> tglx@...utronix.de; mingo@...hat.com; bp@...en8.de
> Cc: fenghua.yu@...el.com; dave.hansen@...ux.intel.com; x86@...nel.org;
> hpa@...or.com; paulmck@...nel.org; akpm@...ux-foundation.org;
> quic_neeraju@...cinc.com; rdunlap@...radead.org;
> damien.lemoal@...nsource.wdc.com; songmuchun@...edance.com;
> peterz@...radead.org; jpoimboe@...nel.org; pbonzini@...hat.com;
> chang.seok.bae@...el.com; pawan.kumar.gupta@...ux.intel.com;
> jmattson@...gle.com; daniel.sneddon@...ux.intel.com; Das1, Sandipan
> <Sandipan.Das@....com>; tony.luck@...el.com; james.morse@....com;
> linux-doc@...r.kernel.org; linux-kernel@...r.kernel.org;
> bagasdotme@...il.com; eranian@...gle.com; christophe.leroy@...roup.eu;
> jarkko@...nel.org; adrian.hunter@...el.com; quic_jiles@...cinc.com;
> peternewman@...gle.com
> Subject: Re: [PATCH v9 10/13] x86/resctrl: Add sysfs interface to write
> mbm_total_bytes_config
>
> Hi Babu,
>
> On 12/1/2022 7:37 AM, Babu Moger wrote:
> > The current event configuration for mbm_total_bytes can be changed by
> > the user by writing to the file
> > /sys/fs/resctrl/info/L3_MON/mbm_total_bytes_config.
>
> Please drop "current" from above
Sure.
>
> >
> > The event configuration settings are domain specific and will affect
> > all the CPUs in the domain.
>
> please drop "will"
Ok
>
> >
> > Following are the types of events supported:
> >
> > ====
> ===========================================================
> > Bits Description
> > ====
> ===========================================================
> > 6 Dirty Victims from the QOS domain to all types of memory
> > 5 Reads to slow memory in the non-local NUMA domain
> > 4 Reads to slow memory in the local NUMA domain
> > 3 Non-temporal writes to non-local NUMA domain
> > 2 Non-temporal writes to local NUMA domain
> > 1 Reads to memory in the non-local NUMA domain
> > 0 Reads to memory in the local NUMA domain
> > ====
> ===========================================================
> >
> > For example:
> > To change the mbm_total_bytes to count only reads on domain 0, the
> > bits 0, 1, 4 and 5 needs to be set, which is 110011b (in hex 0x33).
> > Run the command.
> > $echo 0=0x33 > /sys/fs/resctrl/info/L3_MON/mbm_total_bytes_config
> >
> > To change the mbm_total_bytes to count all the slow memory reads on
> > domain 1, the bits 4 and 5 needs to be set which is 110000b (in hex 0x30).
> > Run the command.
> > $echo 1=0x30 > /sys/fs/resctrl/info/L3_MON/mbm_total_bytes_config
> >
> > Signed-off-by: Babu Moger <babu.moger@....com>
> > ---
> > arch/x86/kernel/cpu/resctrl/monitor.c | 13 +++
> > arch/x86/kernel/cpu/resctrl/rdtgroup.c | 127
> ++++++++++++++++++++++++++++++++
> > include/linux/resctrl.h | 10 +++
> > 3 files changed, 149 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c
> > b/arch/x86/kernel/cpu/resctrl/monitor.c
> > index 7c8a3a745041..b265856835de 100644
> > --- a/arch/x86/kernel/cpu/resctrl/monitor.c
> > +++ b/arch/x86/kernel/cpu/resctrl/monitor.c
> > @@ -176,6 +176,19 @@ void resctrl_arch_reset_rmid(struct rdt_resource *r,
> struct rdt_domain *d,
> > memset(am, 0, sizeof(*am));
> > }
> >
> > +void resctrl_arch_reset_rmid_all(struct rdt_resource *r, struct
> > +rdt_domain *d) {
> > + struct rdt_hw_domain *hw_dom = resctrl_to_arch_dom(d);
> > +
> > + if (is_mbm_total_enabled())
> > + memset(hw_dom->arch_mbm_total, 0,
> > + sizeof(*hw_dom->arch_mbm_total) * r->num_rmid);
> > +
> > + if (is_mbm_local_enabled())
> > + memset(hw_dom->arch_mbm_local, 0,
> > + sizeof(*hw_dom->arch_mbm_local) * r->num_rmid); }
> > +
>
> We learned a lot more about this area after Peter's discovery:
> https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore.kern
> el.org%2Flkml%2F20221207112924.3602960-1-
> peternewman%40google.com%2F&data=05%7C01%7Cbabu.moger%40am
> d.com%7Cc9ca23a7b3c643d2385508dadec9f83d%7C3dd8961fe4884e608e11a8
> 2d994e183d%7C0%7C0%7C638067256273943013%7CUnknown%7CTWFpbGZsb
> 3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%
> 3D%7C3000%7C%7C%7C&sdata=Pmvi2L4L727GqALGaeEO0MbpcnuRcqKc
> opNNXuu%2BbFM%3D&reserved=0
>
> Since this is a new generic function it should be clear in which scenarios it is
> valid.
> Could you please add a function comment that warns future developers about
> consequences if a new usage is considered? Something like:
>
> /*
> * Assumes that hardware counters are also reset and thus that there is no
> need
> * to record initial non-zero counts.
> */
Ok. Sure.
>
> > static u64 mbm_overflow_count(u64 prev_msr, u64 cur_msr, unsigned int
> > width) {
> > u64 shift = 64 - width, chunks;
> > diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
> > b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
> > index 580f3cce19e2..8a22a652a6e8 100644
> > --- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
> > +++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
> > @@ -1517,6 +1517,130 @@ static int mbm_local_bytes_config_show(struct
> kernfs_open_file *of,
> > return 0;
> > }
> >
> > +static void mon_event_config_write(void *info) {
> > + struct mon_config_info *mon_info = info;
> > + u32 index;
> > +
>
> index does not need to be u32 ... mon_event_config_index_get() returns
> "unsigned int"
> and wrmsr expects "unsigned int", it can also just be "unsigned int".
Ok.
>
>
> > + index = mon_event_config_index_get(mon_info->evtid);
> > + if (index == INVALID_CONFIG_INDEX) {
> > + pr_warn_once("Invalid event id %d\n", mon_info->evtid);
> > + return;
> > + }
> > + wrmsr(MSR_IA32_EVT_CFG_BASE + index, mon_info->mon_config, 0);
> }
> > +
> > +static int mbm_config_write_domain(struct rdt_resource *r,
> > + struct rdt_domain *d, u32 evtid, u32 val) {
> > + struct mon_config_info mon_info = {0};
> > + int ret = 0;
> > +
> > + /* mon_config cannot be more than the supported set of events */
> > + if (val > MAX_EVT_CONFIG_BITS) {
> > + rdt_last_cmd_puts("Invalid event configuration\n");
> > + return -EINVAL;
> > + }
> > +
> > + /*
> > + * Read the current config value first. If both are the same then
> > + * no need to write it again.
> > + */
> > + mon_info.evtid = evtid;
> > + mondata_config_read(d, &mon_info);
> > + if (mon_info.mon_config == val)
> > + goto out;
> > +
> > + mon_info.mon_config = val;
> > +
> > + /*
> > + * Update MSR_IA32_EVT_CFG_BASE MSRs on all the CPUs in the
> > + * domain. The MSRs offset from MSR MSR_IA32_EVT_CFG_BASE
> > + * are scoped at the domain level. Writing any of these MSRs
> > + * on one CPU is supposed to be observed by all CPUs in the
> > + * domain. However, the hardware team recommends to update
> > + * these MSRs on all the CPUs in the domain.
> > + */
> > + on_each_cpu_mask(&d->cpu_mask, mon_event_config_write,
> &mon_info,
> > +1);
> > +
> > + /*
> > + * When an Event Configuration is changed, the bandwidth counters
> > + * for all RMIDs and Events will be cleared by the hardware. The
> > + * hardware also sets MSR_IA32_QM_CTR.Unavailable (bit 62) for
> > + * every RMID on the next read to any event for every RMID.
> > + * Subsequent reads will have MSR_IA32_QM_CTR.Unavailable (bit 62)
> > + * cleared while it is tracked by the hardware. Clear the
> > + * mbm_local and mbm_total counts for all the RMIDs.
> > + */
> > + resctrl_arch_reset_rmid_all(r, d);
>
> If I understand correctly the expectation is that when user space read counters
> (via mon_data files) right after the configuration was changed then this read
> will return "Unavailable" and then the next read will return data.
>
> If this is the case then I think a snippet about this user experience would be
> helpful to add to the documentation.
Ok. How about this in the documentation?
"When an event configuration is changed, the bandwidth counters for all the RMIDs and the events will be cleared for that domain.
The next read for every RMID will report "Unavailable" and subsequent reads will report the valid value."
>
> Have you considered doing a preemptive read on the RMIDs that are in use to
> avoid users encountering "Unavailable"? I assume doing so on a busy system
> could potentially involve hundreds of register reads/writes.
No. I have not tried that.
>
> > +
> > +out:
> > + return ret;
> > +}
> > +
> > +static int mon_config_write(struct rdt_resource *r, char *tok, u32
> > +evtid) {
> > + char *dom_str = NULL, *id_str;
> > + unsigned long dom_id, val;
> > + struct rdt_domain *d;
> > + int ret = 0;
> > +
> > +next:
> > + if (!tok || tok[0] == '\0')
> > + return 0;
> > +
> > + /* Start processing the strings for each domain */
> > + dom_str = strim(strsep(&tok, ";"));
> > + id_str = strsep(&dom_str, "=");
> > +
> > + if (!id_str || kstrtoul(id_str, 10, &dom_id)) {
> > + rdt_last_cmd_puts("Missing '=' or non-numeric domain id\n");
> > + return -EINVAL;
> > + }
> > +
> > + if (!dom_str || kstrtoul(dom_str, 16, &val)) {
> > + rdt_last_cmd_puts("Non-numeric event configuration
> value\n");
> > + return -EINVAL;
> > + }
> > +
> > + list_for_each_entry(d, &r->domains, list) {
> > + if (d->id == dom_id) {
> > + ret = mbm_config_write_domain(r, d, evtid, val);
> > + if (ret)
> > + return -EINVAL;
> > + goto next;
> > + }
> > + }
> > +
> > + return -EINVAL;
> > +}
> > +
> > +static ssize_t mbm_total_bytes_config_write(struct kernfs_open_file *of,
> > + char *buf, size_t nbytes,
> > + loff_t off)
> > +{
> > + struct rdt_resource *r = of->kn->parent->priv;
> > + int ret;
> > +
> > + /* Valid input requires a trailing newline */
> > + if (nbytes == 0 || buf[nbytes - 1] != '\n')
> > + return -EINVAL;
> > +
> > + cpus_read_lock();
> > + mutex_lock(&rdtgroup_mutex);
> > +
> > + rdt_last_cmd_clear();
> > +
> > + buf[nbytes - 1] = '\0';
> > +
> > + ret = mon_config_write(r, buf, QOS_L3_MBM_TOTAL_EVENT_ID);
> > +
> > + mutex_unlock(&rdtgroup_mutex);
> > + cpus_read_unlock();
> > +
> > + return ret ?: nbytes;
> > +}
> > +
> > /* rdtgroup information files for one cache resource. */ static
> > struct rftype res_common_files[] = {
> > {
> > @@ -1617,9 +1741,10 @@ static struct rftype res_common_files[] = {
> > },
> > {
> > .name = "mbm_total_bytes_config",
> > - .mode = 0444,
> > + .mode = 0644,
> > .kf_ops = &rdtgroup_kf_single_ops,
> > .seq_show = mbm_total_bytes_config_show,
> > + .write = mbm_total_bytes_config_write,
> > },
> > {
> > .name = "mbm_local_bytes_config",
> > diff --git a/include/linux/resctrl.h b/include/linux/resctrl.h index
> > 0cee154abc9f..e4dc65892446 100644
> > --- a/include/linux/resctrl.h
> > +++ b/include/linux/resctrl.h
> > @@ -250,6 +250,16 @@ int resctrl_arch_rmid_read(struct rdt_resource
> > *r, struct rdt_domain *d, void resctrl_arch_reset_rmid(struct rdt_resource
> *r, struct rdt_domain *d,
> > u32 rmid, enum resctrl_event_id eventid);
> >
> > +/**
> > + * resctrl_arch_reset_rmid_all() - Reset any private state associated with
> > + * all the rmids.
>
> It could be more explicit:
> "Reset all private state associated with all rmids and eventids."
Sure.
>
> > + * @r: The domain's resource.
> > + * @d: The rmid's domain.
>
> This copy&paste needs some changes to match this new utility.
> How about:
> @r: The resctrl resource.
> @d: The domain for which all architectural counter state will be cleared.
Sure.
>
> I think it can be improved more but the above could be a start (please do not
> copy verbatim but ensure style is correct.)
>
> Keep in mind that this utility does not clear the non-architectural counter state.
> This does not apply to AMD since that state is used by the software controller,
> but it needs to be kept in mind if another usage for this utility arises.
Sure. Will add this text in the description.
>
> > + *
> > + * This can be called from any CPU.
> > + */
> > +void resctrl_arch_reset_rmid_all(struct rdt_resource *r, struct
> > +rdt_domain *d);
> > +
> > extern unsigned int resctrl_rmid_realloc_threshold; extern unsigned
> > int resctrl_rmid_realloc_limit;
> >
> >
> >
>
> The above hunk fails the "no spaces before tabs" checkpatch check.
Sure. Will check.
Thanks
Babu
>
> Reinette
Powered by blists - more mailing lists