Message-ID: <d92184cd-e79b-80ae-4f89-92dfd43d1e92@sberdevices.ru>
Date:   Tue, 20 Dec 2022 07:23:46 +0000
From:   Arseniy Krasnov <AVKrasnov@...rdevices.ru>
To:     Stefano Garzarella <sgarzare@...hat.com>,
        "David S. Miller" <davem@...emloft.net>,
        "edumazet@...gle.com" <edumazet@...gle.com>,
        "Jakub Kicinski" <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>
CC:     "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "virtualization@...ts.linux-foundation.org" 
        <virtualization@...ts.linux-foundation.org>,
        "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        kernel <kernel@...rdevices.ru>,
        Bobby Eshleman <bobby.eshleman@...edance.com>,
        Krasnov Arseniy <oxffffaa@...il.com>,
        "Arseniy Krasnov" <AVKrasnov@...rdevices.ru>
Subject: [RFC PATCH v5 4/4] test/vsock: vsock_perf utility

This adds utility to check vsock rx/tx performance.

Usage as sender:
./vsock_perf --sender <cid> --port <port> --bytes <bytes to send>
Usage as receiver:
./vsock_perf --port <port> --rcvlowat <SO_RCVLOWAT>

Signed-off-by: Arseniy Krasnov <AVKrasnov@...rdevices.ru>
---
 tools/testing/vsock/Makefile     |   3 +-
 tools/testing/vsock/README       |  34 +++
 tools/testing/vsock/vsock_perf.c | 441 +++++++++++++++++++++++++++++++
 3 files changed, 477 insertions(+), 1 deletion(-)
 create mode 100644 tools/testing/vsock/vsock_perf.c

diff --git a/tools/testing/vsock/Makefile b/tools/testing/vsock/Makefile
index f8293c6910c9..43a254f0e14d 100644
--- a/tools/testing/vsock/Makefile
+++ b/tools/testing/vsock/Makefile
@@ -1,8 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0-only
-all: test
+all: test vsock_perf
 test: vsock_test vsock_diag_test
 vsock_test: vsock_test.o timeout.o control.o util.o
 vsock_diag_test: vsock_diag_test.o timeout.o control.o util.o
+vsock_perf: vsock_perf.o
 
 CFLAGS += -g -O2 -Werror -Wall -I. -I../../include -I../../../usr/include -Wno-pointer-sign -fno-strict-overflow -fno-strict-aliasing -fno-common -MMD -U_FORTIFY_SOURCE -D_GNU_SOURCE
 .PHONY: all test clean
diff --git a/tools/testing/vsock/README b/tools/testing/vsock/README
index 4d5045e7d2c3..e6f6735bba05 100644
--- a/tools/testing/vsock/README
+++ b/tools/testing/vsock/README
@@ -35,3 +35,37 @@ Invoke test binaries in both directions as follows:
                        --control-port=$GUEST_IP \
                        --control-port=1234 \
                        --peer-cid=3
+
+vsock_perf utility
+-------------------
+'vsock_perf' is a simple tool to measure vsock performance. It works in
+sender/receiver modes: sender connect to peer at the specified port and
+starts data transmission to the receiver. After data processing is done,
+it prints several metrics(see below).
+
+Usage:
+# run as sender
+# connect to CID 2, port 1234, send 1G of data, tx buf size is 1M
+./vsock_perf --sender 2 --port 1234 --bytes 1G --buf-size 1M
+
+Output:
+tx performance: A Gb/s
+
+Output explanation:
+A is calculated as "number of bytes to send" / "time in tx loop"
+
+# run as receiver
+# listen port 1234, rx buf size is 1M, socket buf size is 1G, SO_RCVLOWAT is 64K
+./vsock_perf --port 1234 --buf-size 1M --vsk-size 1G --rcvlowat 64K
+
+Output:
+rx performance: A Gb/s
+total in 'read()': B sec
+POLLIN wakeups: C
+average in 'read()': D ns
+
+Output explanation:
+A is calculated as "number of received bytes" / "time in rx loop".
+B is time, spent in 'read()' system call(excluding 'poll()')
+C is number of 'poll()' wake ups with POLLIN bit set.
+D is B / C, e.g. average amount of time, spent in single 'read()'.
diff --git a/tools/testing/vsock/vsock_perf.c b/tools/testing/vsock/vsock_perf.c
new file mode 100644
index 000000000000..ccd595462b40
--- /dev/null
+++ b/tools/testing/vsock/vsock_perf.c
@@ -0,0 +1,441 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * vsock_perf - benchmark utility for vsock.
+ *
+ * Copyright (C) 2022 SberDevices.
+ *
+ * Author: Arseniy Krasnov <AVKrasnov@...rdevices.ru>
+ */
+#include <getopt.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdbool.h>
+#include <string.h>
+#include <errno.h>
+#include <unistd.h>
+#include <time.h>
+#include <stdint.h>
+#include <poll.h>
+#include <sys/socket.h>
+#include <linux/vm_sockets.h>
+
+#define DEFAULT_BUF_SIZE_BYTES	(128 * 1024)
+#define DEFAULT_TO_SEND_BYTES	(64 * 1024)
+#define DEFAULT_VSOCK_BUF_BYTES (256 * 1024)
+#define DEFAULT_RCVLOWAT_BYTES	1
+#define DEFAULT_PORT		1234
+
+#define BYTES_PER_GB		(1024 * 1024 * 1024ULL)
+#define NSEC_PER_SEC		(1000000000ULL)
+
+static unsigned int port = DEFAULT_PORT;
+static unsigned long buf_size_bytes = DEFAULT_BUF_SIZE_BYTES;
+static unsigned long vsock_buf_bytes = DEFAULT_VSOCK_BUF_BYTES;
+
+static inline time_t current_nsec(void)
+{
+	struct timespec ts;
+
+	if (clock_gettime(CLOCK_REALTIME, &ts)) {
+		perror("clock_gettime");
+		exit(EXIT_FAILURE);
+	}
+
+	return (ts.tv_sec * NSEC_PER_SEC) + ts.tv_nsec;
+}
+
+/* From lib/cmdline.c. */
+static unsigned long memparse(const char *ptr)
+{
+	char *endptr;
+
+	unsigned long long ret = strtoull(ptr, &endptr, 0);
+
+	switch (*endptr) {
+	case 'E':
+	case 'e':
+		ret <<= 10;
+	case 'P':
+	case 'p':
+		ret <<= 10;
+	case 'T':
+	case 't':
+		ret <<= 10;
+	case 'G':
+	case 'g':
+		ret <<= 10;
+	case 'M':
+	case 'm':
+		ret <<= 10;
+	case 'K':
+	case 'k':
+		ret <<= 10;
+		endptr++;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+static void vsock_increase_buf_size(int fd)
+{
+	if (setsockopt(fd, AF_VSOCK, SO_VM_SOCKETS_BUFFER_MAX_SIZE,
+		       &vsock_buf_bytes, sizeof(vsock_buf_bytes))) {
+		perror("setsockopt(SO_VM_SOCKETS_BUFFER_MAX_SIZE)");
+		exit(EXIT_FAILURE);
+	}
+
+	if (setsockopt(fd, AF_VSOCK, SO_VM_SOCKETS_BUFFER_SIZE,
+		       &vsock_buf_bytes, sizeof(vsock_buf_bytes))) {
+		perror("setsockopt(SO_VM_SOCKETS_BUFFER_SIZE)");
+		exit(EXIT_FAILURE);
+	}
+}
+
+static int vsock_connect(unsigned int cid, unsigned int port)
+{
+	union {
+		struct sockaddr sa;
+		struct sockaddr_vm svm;
+	} addr = {
+		.svm = {
+			.svm_family = AF_VSOCK,
+			.svm_port = port,
+			.svm_cid = cid,
+		},
+	};
+	int fd;
+
+	fd = socket(AF_VSOCK, SOCK_STREAM, 0);
+
+	if (fd < 0) {
+		perror("socket");
+		return -1;
+	}
+
+	if (connect(fd, &addr.sa, sizeof(addr.svm)) < 0) {
+		perror("connect");
+		close(fd);
+		return -1;
+	}
+
+	return fd;
+}
+
+static float get_gbps(unsigned long bits, time_t ns_delta)
+{
+	return ((float)bits / 1000000000ULL) /
+	       ((float)ns_delta / NSEC_PER_SEC);
+}
+
+static void run_receiver(unsigned long rcvlowat_bytes)
+{
+	unsigned int read_cnt;
+	time_t rx_begin_ns;
+	time_t in_read_ns;
+	size_t total_recv;
+	int client_fd;
+	char *data;
+	int fd;
+	union {
+		struct sockaddr sa;
+		struct sockaddr_vm svm;
+	} addr = {
+		.svm = {
+			.svm_family = AF_VSOCK,
+			.svm_port = port,
+			.svm_cid = VMADDR_CID_ANY,
+		},
+	};
+	union {
+		struct sockaddr sa;
+		struct sockaddr_vm svm;
+	} clientaddr;
+
+	socklen_t clientaddr_len = sizeof(clientaddr.svm);
+
+	printf("Run as receiver\n");
+	printf("Listen port %u\n", port);
+	printf("RX buffer %lu bytes\n", buf_size_bytes);
+	printf("vsock buffer %lu bytes\n", vsock_buf_bytes);
+	printf("SO_RCVLOWAT %lu bytes\n", rcvlowat_bytes);
+
+	fd = socket(AF_VSOCK, SOCK_STREAM, 0);
+
+	if (fd < 0) {
+		perror("socket");
+		exit(EXIT_FAILURE);
+	}
+
+	if (bind(fd, &addr.sa, sizeof(addr.svm)) < 0) {
+		perror("bind");
+		exit(EXIT_FAILURE);
+	}
+
+	if (listen(fd, 1) < 0) {
+		perror("listen");
+		exit(EXIT_FAILURE);
+	}
+
+	client_fd = accept(fd, &clientaddr.sa, &clientaddr_len);
+
+	if (client_fd < 0) {
+		perror("accept");
+		exit(EXIT_FAILURE);
+	}
+
+	vsock_increase_buf_size(client_fd);
+
+	if (setsockopt(client_fd, SOL_SOCKET, SO_RCVLOWAT,
+		       &rcvlowat_bytes,
+		       sizeof(rcvlowat_bytes))) {
+		perror("setsockopt(SO_RCVLOWAT)");
+		exit(EXIT_FAILURE);
+	}
+
+	data = malloc(buf_size_bytes);
+
+	if (!data) {
+		fprintf(stderr, "'malloc()' failed\n");
+		exit(EXIT_FAILURE);
+	}
+
+	read_cnt = 0;
+	in_read_ns = 0;
+	total_recv = 0;
+	rx_begin_ns = current_nsec();
+
+	while (1) {
+		struct pollfd fds = { 0 };
+
+		fds.fd = client_fd;
+		fds.events = POLLIN | POLLERR |
+			     POLLHUP | POLLRDHUP;
+
+		if (poll(&fds, 1, -1) < 0) {
+			perror("poll");
+			exit(EXIT_FAILURE);
+		}
+
+		if (fds.revents & POLLERR) {
+			fprintf(stderr, "'poll()' error\n");
+			exit(EXIT_FAILURE);
+		}
+
+		if (fds.revents & POLLIN) {
+			ssize_t bytes_read;
+			time_t t;
+
+			t = current_nsec();
+			bytes_read = read(fds.fd, data, buf_size_bytes);
+			in_read_ns += (current_nsec() - t);
+			read_cnt++;
+
+			if (!bytes_read)
+				break;
+
+			if (bytes_read < 0) {
+				perror("read");
+				exit(EXIT_FAILURE);
+			}
+
+			total_recv += bytes_read;
+		}
+
+		if (fds.revents & (POLLHUP | POLLRDHUP))
+			break;
+	}
+
+	printf("total bytes received: %zu\n", total_recv);
+	printf("rx performance: %f Gbits/s\n",
+	       get_gbps(total_recv * 8, current_nsec() - rx_begin_ns));
+	printf("total time in 'read()': %f sec\n", (float)in_read_ns / NSEC_PER_SEC);
+	printf("average time in 'read()': %f ns\n", (float)in_read_ns / read_cnt);
+	printf("POLLIN wakeups: %i\n", read_cnt);
+
+	free(data);
+	close(client_fd);
+	close(fd);
+}
+
+static void run_sender(int peer_cid, unsigned long to_send_bytes)
+{
+	time_t tx_begin_ns;
+	time_t tx_total_ns;
+	size_t total_send;
+	void *data;
+	int fd;
+
+	printf("Run as sender\n");
+	printf("Connect to %i:%u\n", peer_cid, port);
+	printf("Send %lu bytes\n", to_send_bytes);
+	printf("TX buffer %lu bytes\n", buf_size_bytes);
+
+	fd = vsock_connect(peer_cid, port);
+
+	if (fd < 0)
+		exit(EXIT_FAILURE);
+
+	data = malloc(buf_size_bytes);
+
+	if (!data) {
+		fprintf(stderr, "'malloc()' failed\n");
+		exit(EXIT_FAILURE);
+	}
+
+	memset(data, 0, buf_size_bytes);
+	total_send = 0;
+	tx_begin_ns = current_nsec();
+
+	while (total_send < to_send_bytes) {
+		ssize_t sent;
+
+		sent = write(fd, data, buf_size_bytes);
+
+		if (sent <= 0) {
+			perror("write");
+			exit(EXIT_FAILURE);
+		}
+
+		total_send += sent;
+	}
+
+	tx_total_ns = current_nsec() - tx_begin_ns;
+
+	printf("total bytes sent: %zu\n", total_send);
+	printf("tx performance: %f Gbits/s\n",
+	       get_gbps(total_send * 8, tx_total_ns));
+	printf("total time in 'write()': %f sec\n",
+	       (float)tx_total_ns / NSEC_PER_SEC);
+
+	close(fd);
+	free(data);
+}
+
+static const char optstring[] = "";
+static const struct option longopts[] = {
+	{
+		.name = "help",
+		.has_arg = no_argument,
+		.val = 'H',
+	},
+	{
+		.name = "sender",
+		.has_arg = required_argument,
+		.val = 'S',
+	},
+	{
+		.name = "port",
+		.has_arg = required_argument,
+		.val = 'P',
+	},
+	{
+		.name = "bytes",
+		.has_arg = required_argument,
+		.val = 'M',
+	},
+	{
+		.name = "buf-size",
+		.has_arg = required_argument,
+		.val = 'B',
+	},
+	{
+		.name = "vsk-size",
+		.has_arg = required_argument,
+		.val = 'V',
+	},
+	{
+		.name = "rcvlowat",
+		.has_arg = required_argument,
+		.val = 'R',
+	},
+	{},
+};
+
+static void usage(void)
+{
+	printf("Usage: ./vsock_perf [--help] [options]\n"
+	       "\n"
+	       "This is benchmarking utility, to test vsock performance.\n"
+	       "It runs in two modes: sender or receiver. In sender mode, it\n"
+	       "connects to the specified CID and starts data transmission.\n"
+	       "\n"
+	       "Options:\n"
+	       "  --help			This message\n"
+	       "  --sender   <cid>		Sender mode (receiver default)\n"
+	       "                                <cid> of the receiver to connect to\n"
+	       "  --port     <port>		Port (default %d)\n"
+	       "  --bytes    <bytes>KMG		Bytes to send (default %d)\n"
+	       "  --buf-size <bytes>KMG		Data buffer size (default %d). In sender mode\n"
+	       "                                it is the buffer size, passed to 'write()'. In\n"
+	       "                                receiver mode it is the buffer size passed to 'read()'.\n"
+	       "  --vsk-size <bytes>KMG		Socket buffer size (default %d)\n"
+	       "  --rcvlowat <bytes>KMG		SO_RCVLOWAT value (default %d)\n"
+	       "\n", DEFAULT_PORT, DEFAULT_TO_SEND_BYTES,
+	       DEFAULT_BUF_SIZE_BYTES, DEFAULT_VSOCK_BUF_BYTES,
+	       DEFAULT_RCVLOWAT_BYTES);
+	exit(EXIT_FAILURE);
+}
+
+static long strtolx(const char *arg)
+{
+	long value;
+	char *end;
+
+	value = strtol(arg, &end, 10);
+
+	if (end != arg + strlen(arg))
+		usage();
+
+	return value;
+}
+
+int main(int argc, char **argv)
+{
+	unsigned long to_send_bytes = DEFAULT_TO_SEND_BYTES;
+	unsigned long rcvlowat_bytes = DEFAULT_RCVLOWAT_BYTES;
+	int peer_cid = -1;
+	bool sender = false;
+
+	while (1) {
+		int opt = getopt_long(argc, argv, optstring, longopts, NULL);
+
+		if (opt == -1)
+			break;
+
+		switch (opt) {
+		case 'V': /* Peer buffer size. */
+			vsock_buf_bytes = memparse(optarg);
+			break;
+		case 'R': /* SO_RCVLOWAT value. */
+			rcvlowat_bytes = memparse(optarg);
+			break;
+		case 'P': /* Port to connect to. */
+			port = strtolx(optarg);
+			break;
+		case 'M': /* Bytes to send. */
+			to_send_bytes = memparse(optarg);
+			break;
+		case 'B': /* Size of rx/tx buffer. */
+			buf_size_bytes = memparse(optarg);
+			break;
+		case 'S': /* Sender mode. CID to connect to. */
+			peer_cid = strtolx(optarg);
+			sender = true;
+			break;
+		case 'H': /* Help. */
+			usage();
+			break;
+		default:
+			usage();
+		}
+	}
+
+	if (!sender)
+		run_receiver(rcvlowat_bytes);
+	else
+		run_sender(peer_cid, to_send_bytes);
+
+	return 0;
+}
-- 
2.25.1

Powered by blists - more mailing lists