linux-kernel - Re: [PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <ff5b09db-4900-0b5b-e821-fa05b8d907a4@linaro.org>
Date:   Tue, 20 Dec 2022 11:50:05 +0100
From:   Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To:     Bhavya Kapoor <b-kapoor@...com>, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org
Cc:     linux-arm-kernel@...ts.infradead.org,
        krzysztof.kozlowski+dt@...aro.org, robh+dt@...nel.org,
        kristo@...nel.org, nm@...com
Subject: Re: [PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes

On 20/12/2022 11:12, Bhavya Kapoor wrote:
> J721s2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes
> for 8 channel ADCs for J721s2 SoC.
> 
> Signed-off-by: Bhavya Kapoor <b-kapoor@...com>
> ---
>  .../dts/ti/k3-j721s2-common-proc-board.dts    | 14 +++++++
>  .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     | 42 ++++++++++++++++++-
>  2 files changed, 55 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
> index a7aa6cf08acd..67593aa69327 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
> @@ -309,3 +309,17 @@ &mcu_mcan1 {
>  	pinctrl-0 = <&mcu_mcan1_pins_default>;
>  	phys = <&transceiver2>;
>  };
> +
> +&tscadc0 {
> +	status = "okay";
> +	adc {
> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
> +	};
> +};
> +
> +&tscadc1 {
> +	status = "okay";
> +	adc {
> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
> +	};
> +};
> \ No newline at end of file

This is a friendly reminder during the review process.

It seems my previous comments were not fully addressed. Maybe my
feedback got lost between the quotes, maybe you just forgot to apply it.
Please go back to the previous discussion and either implement all
requested changes or keep discussing them.

Thank you.

Best regards,
Krzysztof