linux-kernel - Re: [PATCH v6 5/5] drm/tidss: Enable Dual and Duplicate Modes for OLDI

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <84977593-4671-7582-d5f2-cf69755f1145@ideasonboard.com>
Date:   Tue, 20 Dec 2022 15:04:13 +0200
From:   Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
To:     Aradhya Bhatia <a-bhatia1@...com>, Jyri Sarha <jyri.sarha@....fi>,
        Rob Herring <robh+dt@...nel.org>,
        David Airlie <airlied@...il.com>,
        Daniel Vetter <daniel@...ll.ch>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc:     DRI Development List <dri-devel@...ts.freedesktop.org>,
        Devicetree List <devicetree@...r.kernel.org>,
        Linux Kernel List <linux-kernel@...r.kernel.org>,
        Nishanth Menon <nm@...com>,
        Vignesh Raghavendra <vigneshr@...com>,
        Rahul T R <r-ravikumar@...com>,
        Devarsh Thakkar <devarsht@...com>,
        Jayesh Choudhary <j-choudhary@...com>
Subject: Re: [PATCH v6 5/5] drm/tidss: Enable Dual and Duplicate Modes for
 OLDI

On 19/11/2022 19:30, Aradhya Bhatia wrote:
> The AM625 DSS IP contains 2 OLDI TXes which can work together to enable 2
> cloned displays of or even a single dual-link display with higher
> resolutions like WUXGA (1920x1200@...ps) with a reduced OLDI clock
> frequency.
> 
> Configure the necessary register to enable and disable the OLDI TXes
> with required modes configurations.
> 
> Signed-off-by: Aradhya Bhatia <a-bhatia1@...com>
> ---
>   drivers/gpu/drm/tidss/tidss_dispc.c | 24 ++++++++++++++++++++++--
>   1 file changed, 22 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/tidss/tidss_dispc.c b/drivers/gpu/drm/tidss/tidss_dispc.c
> index f26129fb1d8f..cf43de6216a5 100644
> --- a/drivers/gpu/drm/tidss/tidss_dispc.c
> +++ b/drivers/gpu/drm/tidss/tidss_dispc.c
> @@ -1012,8 +1012,8 @@ static void dispc_enable_oldi(struct dispc_device *dispc, u32 hw_videoport,
>   	int count = 0;
>   
>   	/*
> -	 * For the moment DUALMODESYNC, MASTERSLAVE, MODE, and SRC
> -	 * bits of DISPC_VP_DSS_OLDI_CFG are set statically to 0.
> +	 * For the moment MASTERSLAVE, and SRC bits of DISPC_VP_DSS_OLDI_CFG are
> +	 * always set to 0.
>   	 */
>   
>   	if (fmt->data_width == 24)
> @@ -1030,6 +1030,26 @@ static void dispc_enable_oldi(struct dispc_device *dispc, u32 hw_videoport,
>   
>   	oldi_cfg |= BIT(0); /* ENABLE */
>   
> +	switch (dispc->oldi_mode) {
> +	case OLDI_SINGLE_LINK_SINGLE_MODE:
> +		/* All configuration is done for this mode.  */
> +		break;
> +
> +	case OLDI_SINGLE_LINK_CLONE_MODE:
> +		oldi_cfg |= BIT(5); /* CLONE MODE */
> +		break;
> +
> +	case OLDI_DUAL_LINK_MODE:
> +		oldi_cfg |= BIT(11); /* DUALMODESYNC */
> +		oldi_cfg |= BIT(3); /* data-mapping field also indicates dual-link mode */
> +		break;
> +
> +	default:
> +		dev_warn(dispc->dev, "%s: Incorrect oldi mode. Returning.\n",
> +			 __func__);
> +		return;
> +	}
> +
>   	dispc_vp_write(dispc, hw_videoport, DISPC_VP_DSS_OLDI_CFG, oldi_cfg);
>   
>   	while (!(oldi_reset_bit & dispc_read(dispc, DSS_SYSSTATUS)) &&

Reviewed-by: Tomi Valkeinen <tomi.valkeinen@...asonboard.com>

  Tomi