| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221220192854.521647-4-bmasney@redhat.com>
Date: Tue, 20 Dec 2022 14:28:50 -0500
From: Brian Masney <bmasney@...hat.com>
To: andersson@...nel.org, krzysztof.kozlowski+dt@...aro.org
Cc: quic_shazhuss@...cinc.com, konrad.dybcio@...aro.org,
robh+dt@...nel.org, johan+linaro@...nel.org,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, ahalaney@...hat.com,
echanude@...hat.com
Subject: [PATCH v3 3/7] arm64: dts: qcom: sc8280xp: rename qup0_i2c4 to i2c4
In preparation for adding the missing SPI and I2C nodes to
sc8280xp.dtsi, it was decided to rename all of the existing qupX_
uart, spi, and i2c nodes to drop the qupX_ prefix. Let's go ahead
and rename qup0_i2c4 to i2c4.
Note that some nodes are moved in the file by this patch to preserve
the expected sort order in the file. Additionally, the properties
within the pinctrl state node are sorted to match the expected order
that's typically done in other DTs.
Signed-off-by: Brian Masney <bmasney@...hat.com>
Link: https://lore.kernel.org/lkml/20221212182314.1902632-1-bmasney@redhat.com/
Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>
---
Changes from v2 to v3:
- Reordered properties on renamed state node to match order typically
done elsewhere (Konrod)
- Add Konrad's R-b
Patch introduced in v2
arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 57 +++++++++---------
.../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 58 +++++++++----------
arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 2 +-
3 files changed, 58 insertions(+), 59 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index 03e3814f2722..dfd8c42d8ca0 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -228,6 +228,27 @@ vreg_l9d: ldo9 {
};
};
+&i2c4 {
+ clock-frequency = <400000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_default>;
+
+ status = "okay";
+
+ touchscreen@10 {
+ compatible = "hid-over-i2c";
+ reg = <0x10>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>;
+ vdd-supply = <&vreg_misc_3p3>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts0_default>;
+ };
+};
+
&i2c21 {
clock-frequency = <400000>;
@@ -334,27 +355,6 @@ &qup0 {
status = "okay";
};
-&qup0_i2c4 {
- clock-frequency = <400000>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&qup0_i2c4_default>;
-
- status = "okay";
-
- touchscreen@10 {
- compatible = "hid-over-i2c";
- reg = <0x10>;
-
- hid-descr-addr = <0x1>;
- interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>;
- vdd-supply = <&vreg_misc_3p3>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&ts0_default>;
- };
-};
-
&qup1 {
status = "okay";
};
@@ -494,6 +494,13 @@ hastings_reg_en: hastings-reg-en-state {
&tlmm {
gpio-reserved-ranges = <74 6>, <83 4>, <125 2>, <128 2>, <154 7>;
+ i2c4_default: i2c4-default-state {
+ pins = "gpio171", "gpio172";
+ function = "qup4";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
i2c21_default: i2c21-default-state {
pins = "gpio81", "gpio82";
function = "qup21";
@@ -597,14 +604,6 @@ wake-n-pins {
};
};
- qup0_i2c4_default: qup0-i2c4-default-state {
- pins = "gpio171", "gpio172";
- function = "qup4";
-
- bias-disable;
- drive-strength = <16>;
- };
-
tpad_default: tpad-default-state {
int-n-pins {
pins = "gpio182";
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index ad66a87141be..2c360e52dae5 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -282,6 +282,28 @@ vreg_l9d: ldo9 {
};
};
+&i2c4 {
+ clock-frequency = <400000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_default>;
+
+ status = "okay";
+
+ /* FIXME: verify */
+ touchscreen@10 {
+ compatible = "hid-over-i2c";
+ reg = <0x10>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>;
+ vdd-supply = <&vreg_misc_3p3>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts0_default>;
+ };
+};
+
&i2c21 {
clock-frequency = <400000>;
@@ -554,28 +576,6 @@ &qup0 {
status = "okay";
};
-&qup0_i2c4 {
- clock-frequency = <400000>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&qup0_i2c4_default>;
-
- status = "okay";
-
- /* FIXME: verify */
- touchscreen@10 {
- compatible = "hid-over-i2c";
- reg = <0x10>;
-
- hid-descr-addr = <0x1>;
- interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>;
- vdd-supply = <&vreg_misc_3p3>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&ts0_default>;
- };
-};
-
&qup1 {
status = "okay";
};
@@ -698,6 +698,13 @@ hall_int_n_default: hall-int-n-state {
bias-disable;
};
+ i2c4_default: i2c4-default-state {
+ pins = "gpio171", "gpio172";
+ function = "qup4";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
i2c21_default: i2c21-default-state {
pins = "gpio81", "gpio82";
function = "qup21";
@@ -801,13 +808,6 @@ wake-n-pins {
};
};
- qup0_i2c4_default: qup0-i2c4-default-state {
- pins = "gpio171", "gpio172";
- function = "qup4";
- bias-disable;
- drive-strength = <16>;
- };
-
tpad_default: tpad-default-state {
int-n-pins {
pins = "gpio182";
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 929365cff555..f1111cd7f679 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -858,7 +858,7 @@ qup0: geniqup@...000 {
status = "disabled";
- qup0_i2c4: i2c@...000 {
+ i2c4: i2c@...000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00990000 0 0x4000>;
clock-names = "se";
--
2.38.1
Powered by blists - more mailing lists