linux-kernel - [PATCH 2/2] net: stmmac: resume phy separately before calling stmmac_hw

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20221221080144.2549125-3-xiaoning.wang@nxp.com>
Date:   Wed, 21 Dec 2022 16:01:44 +0800
From:   Clark Wang <xiaoning.wang@....com>
To:     linux@...linux.org.uk, peppe.cavallaro@...com,
        alexandre.torgue@...s.st.com, joabreu@...opsys.com,
        davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org,
        pabeni@...hat.com, mcoquelin.stm32@...il.com, andrew@...n.ch,
        hkallweit1@...il.com
Cc:     netdev@...r.kernel.org, linux-stm32@...md-mailman.stormreply.com,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH 2/2] net: stmmac: resume phy separately before calling stmmac_hw_setup()

On some platforms, mac cannot work after resumed from the suspend with WoL
enabled.

We found the stmmac_hw_setup() when system resumes will called after the
stmmac_mac_link_up(). So the correct values set in stmmac_mac_link_up()
are overwritten by stmmac_core_init() in phylink_resume().

So call the new added function in phylink to resume phy fristly.
Then can call the stmmac_hw_setup() before calling phy_resume().

Signed-off-by: Clark Wang <xiaoning.wang@....com>
---
 .../net/ethernet/stmicro/stmmac/stmmac_main.c    | 16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index c6951c976f5d..d0bdc9b6dbe8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -7532,16 +7532,9 @@ int stmmac_resume(struct device *dev)
 	}
 
 	rtnl_lock();
-	if (device_may_wakeup(priv->device) && priv->plat->pmt) {
-		phylink_resume(priv->phylink);
-	} else {
-		phylink_resume(priv->phylink);
-		if (device_may_wakeup(priv->device))
-			phylink_speed_up(priv->phylink);
-	}
-	rtnl_unlock();
 
-	rtnl_lock();
+	phylink_phy_resume(priv->phylink);
+
 	mutex_lock(&priv->lock);
 
 	stmmac_reset_queues_param(priv);
@@ -7559,6 +7552,11 @@ int stmmac_resume(struct device *dev)
 	stmmac_enable_all_dma_irq(priv);
 
 	mutex_unlock(&priv->lock);
+
+	phylink_resume(priv->phylink);
+	if (device_may_wakeup(priv->device) && !priv->plat->pmt)
+		phylink_speed_up(priv->phylink);
+
 	rtnl_unlock();
 
 	netif_device_attach(ndev);
-- 
2.34.1